LATCH -DIN Type/Ball Lock- (D-PLSH170-1)
- Volume Discount
Product Details:
Manufacturer part number: D-PLSH170-1
Brand: MISUMI
Price: 141.04 €
Delivery time: 16 Days
Technical Data:
No.: 1
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
D-PLSH170-1
- Drawing
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Specifications
- More Information
Drawing / Product specification
D－PLSH170 (①～⑧ Sets)
D－PLSH170－2
| Item | Name | [ M ] | [ H ] |
| ① | Lock holder | Cr12MoV | 52～56HRC |
| ② | Lock holder back plate | ||
| ③ | Lock pin | SKD11＋DLC processing | Surface : 3000HV Material : 35～40HRC |
| ④ | Latch | ||
| ⑤ | Spacer | S45C | Raw material |
| ⑥ | Hexagon Socket Head Bolt | SCM435 | 35～43HRC |
| ⑦ | Dowel pin | SUJ2 | 45～50HRC |
| ⑧ | Spring | SUS631 | － |
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Part Number
|
|---|
| D-PLSH170-1 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | No. | |
|---|---|---|---|---|---|
141.04 € | 1 | Available | 16 Days | 1 |
Loading...
Dimension table
| Part No. | ①Lock holder ②Lock holder back plate | ③Lock pin | ④Latch | |||||||||||||||||||
| Type | No. | A | A1 | A2 | A3 | B | B1 | B2 | B3 | B4 | B5 | P | W | T | LL | LW | LT | LL1 | RL | RT | RW | RL1 |
| D－PLSH170 | 1 | 63 | 8 | 49 | 40.5 | 22 | 14 | 5 | 6 | 8 | 5 | 7 | 6 | 22 | 100 | 12.5 | 6 | 16 | 125 | 6 | 12.5 | 13.8 |
| 2 | 90 | 13 | 69 | 62 | 34 | 24 | 8 | 8 | 18 | 5 | 16 | 7.5 | 32.5 | 140 | 20 | 12.5 | 22.5 | 160 | 12.5 | 16 | 17.7 | |
| 3 | 110 | 15 | 80 | － | 42 | 31 | 9 | 9 | 22 | 7 | 20 | 12 | 44 | 200 | 25 | 16 | 25 | 250 | 16 | 20 | 17.6 | |
| Part No. | ⑤Spacer | Accessories | S Position | S1 Position | Stroke (min) | Stroke (max) | Pulling force (kgf) | |||||
| Type | No. | SW | SL | TW | TL | ⑥Bolt | ⑦Dowel pin | |||||
| D－PLSH170 | 1 | 6.5 | 63 | 6.5 | 80 | M5×25 | 5 × 30 | 28.5 | 4 | 5.5 | 80 | 800 |
| 2 | 8 | 100 | 8 | 125 | M6×40 | 6 × 50 | 45 | 6 | 9.5 | 110 | 1400 | |
| 3 | 12.5 | 100 | 12.5 | 125 | M8×45 | 8 × 60 | 55 | 7 | 10.5 | 190 | 2400 | |
Order Example
| Part No. | - | No. | ||
| D－PLSH170 | - | 1 | ||
Example Use
■ Installation instructions
· Lock holder: mount it in parallel to the parting line.
· Lock pin: cut it to the desired length, make the tap holes and lock the screws with the mold opened.
(Note: Before the lock pin is fixed, the mold must be in the fully closed state, and the clearance between the lock pin and the roller pin should be eliminated, and then the screws should be tightened.)
· Latch: cut it to the desired length, and mount it perpendicular to the parting line.
· Mount 2 or more parting lock sets at symmetrical position of the mold.
· If the mold needs to be repaired, please remove the mold locking unit before proceeding.
· After the product is installed, it is recommended to perform the mold opening and closing sequence test slowly on a mold closing machine or an injection molding machine to ensure the correct operation.
Basic information
| Brand | C-VALUE | Parts | Set |
|---|
This page is LATCH -DIN Type/Ball Lock-, part number D-PLSH170-1.
You can find the detail information about specifications and dimensions on part number D-PLSH170-1.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| D-PLSH170-2 |
| D-PLSH170-3 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | No. |
|---|---|---|---|---|---|
182.73 € | 1 | Available | 16 Days | 2 | |
213.61 € | 1 | Available | 16 Days | 3 |
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.