STRAIGHT EJECTOR SLEEVES / DIN ISO 8405 / EN 1.2344 Equiv. / Nitrided / ◎0.08 / Standard-
- DIN Standard
- New Product
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Specifications
Drawing / Product specification
D-ESN
| L | 100 | 125 | 150 | 175 | 200 | 250 | 300 | 350 | 400 | 450 | 500 |
| S | 50 (V1.5 40) | 60 | 75 | 100 | 115 | 150 | |||||
Range of guaranteed shaft diameter precision (b1=L－x1)
x1 max.40
[ ! ]Nitriding may extend to the head as it is applied after dimension V and D machining.
[ ! ]The diameter (D) portion of the stepped center pin cannot be inserted into the relief hole (C).
| Type | [ M ] | [ H ] | [ T ] V | Applicable center pin shaft diameter tolerance | |
| D-ESN | 1.2344 equivalent+Nitrided | Surface: 900HV Base Material: 40±3HRC | H7 | -0.01 -0.02 | *Note that for sleeves with V dimension tolerance of H7, combination with center pins that have shaft diameter tolerance 0-0.005 is not recommended. The reason for this is the fitting section S are longer. |
[ T ]Dg6
| D≦6 | 6.5≦D≦10 | 12≦D≦16 | D＝20 |
| －0.004 －0.012 | －0.005 －0.014 | －0.006 －0.017 | －0.007 －0.020 |
[ T ]VH7
| V≦3 | 3.5≦V≦6 | 6.5≦V≦10 | V≧12 |
| +0.010 0 | +0.012 0 | +0.015 0 | +0.018 0 |
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
| Part Number | Minimum order quantity | Volume Discount | Head thickness | Shaft diameter tolerance | D/P (Shaft diameter) (mm) | V (Hole diameter) (mm) | L (L dimension) (mm) | |
|---|---|---|---|---|---|---|---|---|
| 1 | 15 Days | 3mm | -0.04/-0.012 | 4 | 1.5 ～ 2.5 | 100 ～ 200 | ||
| 1 | 15 Days | 3mm | -0.04/-0.012 | 4.5 | 1.5 ～ 2.5 | 100 ～ 200 | ||
| 1 | 15 Days | 3mm | -0.04/-0.012 | 5 | 2 ～ 3 | 100 ～ 200 | ||
| 1 | 15 Days | 3mm | -0.04/-0.012 | 5 | 2 ～ 3 | 250 ～ 300 | ||
| 1 | 15 Days | 3mm | -0.04/-0.012 | 5.5 | 2 ～ 3.5 | 100 ～ 200 | ||
| 1 | 15 Days | 3mm | -0.04/-0.012 | 5.5 | 2 ～ 3.5 | 250 ～ 300 | ||
| 1 | 15 Days | 5mm | -0.005/-0.014 | 6 | 2 ～ 4 | 100 ～ 200 | ||
| 1 | 15 Days | 5mm | -0.005/-0.014 | 6 | 2 ～ 4 | 250 ～ 450 | ||
| 1 | 15 Days | 5mm | -0.005/-0.014 | 6.5 | 2.5 ～ 4 | 100 ～ 200 | ||
| 1 | 15 Days | 5mm | -0.005/-0.014 | 6.5 | 2.5 ～ 4 | 250 ～ 450 | ||
| 1 | 15 Days | 5mm | -0.005/-0.014 | 7 | 2.5 ～ 5 | 100 ～ 200 | ||
| 1 | 15 Days | 5mm | -0.005/-0.014 | 7 | 2.5 ～ 5 | 250 ～ 450 | ||
| 1 | 15 Days | 5mm | -0.005/-0.014 | 7.5 | 3 ～ 5 | 100 ～ 200 | ||
| 1 | 15 Days | 5mm | -0.005/-0.014 | 7.5 | 3 ～ 5 | 250 ～ 350 | ||
| 1 | 15 Days | 5mm | -0.005/-0.014 | 8 | 4 ～ 6 | 100 ～ 200 | ||
| 1 | 15 Days | 5mm | -0.005/-0.014 | 8 | 4 ～ 6 | 250 ～ 500 | ||
| 1 | 15 Days | 5mm | -0.005/-0.014 | 9 | 3.5 ～ 6.5 | 100 ～ 200 | ||
| 1 | 15 Days | 5mm | -0.005/-0.014 | 9 | 3.5 ～ 6.5 | 250 ～ 500 | ||
| 1 | 15 Days | 5mm | -0.006/-0.017 | 10 | 5 ～ 7 | 100 ～ 200 | ||
| 1 | 15 Days | 5mm | -0.006/-0.017 | 10 | 5 ～ 7 | 250 ～ 500 | ||
| 1 | 15 Days | 7mm | -0.006/-0.017 | 12 | 4 ～ 9 | 100 ～ 200 | ||
| 1 | 15 Days | 7mm | -0.006/-0.017 | 12 | 4 ～ 9 | 250 ～ 500 | ||
| 1 | 15 Days | 7mm | -0.006/-0.017 | 13 | 8 ～ 10 | 100 ～ 200 | ||
| 1 | 15 Days | 7mm | -0.006/-0.017 | 13 | 8 ～ 10 | 250 ～ 500 | ||
| 1 | 15 Days | 7mm | -0.006/-0.017 | 15 | 9 ～ 10 | 200 ～ 500 | ||
| 1 | 15 Days | 7mm | -0.006/-0.017 | 16 | 10 ～ 12 | 200 ～ 500 | ||
| 1 | 15 Days | 8mm | -0.007/-0.020 | 20 | 12 ～ 15 | 200 ～ 500 |
Loading...
Specification table
| H | T | Part No. | L | V | |||||||||||||
| Type | D | ||||||||||||||||
| 8 | 3 | D-ESN (1.2344 equivalent ＋ Nitrided) | 4 | 100 | *125 | *150 | 1.5 | ||||||||||
| 100 | *125 | *150 | *175 | *200 | 2 | 2.5 | |||||||||||
| 4.5 | 100 | *125 | *150 | 1.5 | |||||||||||||
| 100 | 125 | *150 | 175 | *200 | 2 | ||||||||||||
| *100 | *125 | *150 | 175 | *200 | 2.5 | ||||||||||||
| 10 | 5 | 100 | *125 | *150 | *175 | *200 | 2 | 2.5 | |||||||||
| 100 | 125 | *150 | *175 | *200 | 250 | *300 | 3 | ||||||||||
| 5.5 | 100 | *125 | 150 | 175 | 200 | 2 | 2.5 | ||||||||||
| 100 | *125 | *150 | 175 | *200 | 250 | 300 | 3 | ||||||||||
| 100 | 125 | *150 | 175 | *200 | 250 | 300 | 3.5 | ||||||||||
| 12 | 5 | 6 | 100 | *125 | *150 | *175 | *200 | 250 | *300 | 2 | 2.5 | ||||||
| 100 | *125 | *150 | *175 | *200 | 250 | *300 | 350 | *400 | 450 | 3 | 3.5 | ||||||
| *100 | *125 | *150 | *175 | *200 | 250 | *300 | 350 | *400 | 450 | 4 | |||||||
| 6.5 | *100 | 125 | 150 | 175 | 200 | 250 | 300 | 2.5 | |||||||||
| 100 | 125 | 150 | 175 | *200 | 250 | 300 | 350 | *400 | 450 | 3 | |||||||
| 100 | 125 | 150 | 175 | 200 | 250 | 300 | 350 | 400 | 450 | 3.5 | |||||||
| 100 | 125 | *150 | 175 | *200 | 250 | 300 | 350 | *400 | 450 | 4 | |||||||
| 7 | 100 | 125 | 150 | 175 | 200 | 250 | 300 | 2.5 | |||||||||
| 100 | 125 | 150 | 175 | 200 | 250 | 300 | 350 | 400 | 450 | 3 | 3.5 | ||||||
| 100 | 125 | *150 | 175 | *200 | 250 | *300 | 350 | *400 | 450 | 4 | 4.5 | 5 | |||||
| 7.5 | 100 | 125 | 150 | 175 | 200 | 250 | 300 | 3 | |||||||||
| 100 | 125 | 150 | 175 | 200 | 250 | 300 | 350 | 3.5 | 4.5 | ||||||||
| 100 | 125 | 150 | 175 | *200 | 250 | *300 | 350 | 4 | 5 | ||||||||
| 14 | 8 | 100 | 125 | *150 | *175 | *200 | 250 | *300 | 350 | *400 | 450 | 4 | |||||
| 100 | 125 | 150 | 175 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 4.5 | 5.5 | |||||
| 100 | 125 | *150 | *175 | *200 | 250 | *300 | 350 | *400 | 450 | *500 | 5 | 6 | |||||
| 9 | 100 | 125 | 150 | 175 | 200 | 250 | 300 | 350 | 3.5 | 4 | 4.5 | ||||||
| 100 | 125 | *150 | 175 | *200 | 250 | *300 | 350 | 400 | 450 | 500 | 5 | 6.5 | |||||
| 100 | 125 | 150 | 175 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 6 | ||||||
| 16 | 10 | 100 | 125 | *150 | 175 | 200 | 250 | *300 | 350 | 400 | 450 | *500 | 5 | 6 | 7 | ||
| 100 | 125 | 150 | 175 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 5.5 | ||||||
| 100 | 125 | 150 | 175 | 200 | 250 | *300 | 350 | 400 | 450 | *500 | 7 | ||||||
| 18 | 7 | 12 | 100 | 125 | 150 | 175 | 200 | 250 | 300 | 350 | 400 | 450 | 4 | ||||
| 100 | 125 | 150 | 175 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 5 | 6.5 | 7 | ||||
| 100 | 125 | 150 | 175 | *200 | 250 | *300 | 350 | 400 | 450 | 500 | 8 | 9 | |||||
| 13 | 100 | 125 | 150 | 175 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 8 | 9 | ||||
| 100 | 125 | 150 | 175 | *200 | 250 | *300 | 350 | 400 | 450 | 500 | 10 | ||||||
| 22 | 15 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 9 | ||||||||
| *200 | 250 | *300 | 350 | 400 | 450 | 500 | 10 | ||||||||||
| 16 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 10 | 12 | ||||||||
| *200 | 250 | *300 | 350 | 400 | 450 | 500 | 11 | ||||||||||
| 26 | 8 | 20 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 12 | |||||||
| *200 | 250 | *300 | 350 | 400 | 450 | 500 | 15 | ||||||||||
Order Example
| Part No. | - | L | - | V | ||
| D-ESN 6.5 | - | 125 | - | 2.5 | ||
Alteration
| Part No. | - | L | - | V | - | (KC・WKC…etc.) | ||
| D-ESN 8 | - | 500 | - | 4.5 | - | KC4.5 | ||
Basic information
| Brand | MISUMI | Product composition | Single sleeve | Material | EN 1.2344 Equiv. |
|---|---|---|---|---|---|
| Surface treatment | Nitrided | Concentricity between the hole and shaft diameters | ◎0.08 | Inner dia. tolerance | H7 |
| Tapered or not | No | Technical Standard | DIN |
Configure
Basic Attributes
-
Type
- D-ESN
-
Head thickness
- 3mm
- 5mm
- 7mm
- 8mm
-
Shaft diameter tolerance
- -0.04/-0.012
- -0.005/-0.014
- -0.006/-0.017
- -0.007/-0.020
-
D/P (Shaft diameter)(mm)
-
V (Hole diameter)(mm)
-
L (L dimension)(mm)
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 15 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.