• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

STRAIGHT EJECTOR SLEEVES / DIN ISO 8405 / EN 1.2344 Equiv. / Hardened / ◎0.08 / L, P, V Dimensions Configurable

STRAIGHT EJECTOR SLEEVES / DIN ISO 8405 / EN 1.2344 Equiv. / Hardened / ◎0.08 / L, P, V Dimensions Configurable

MISUMI

MISUMI

  • DIN Standard
  • New Product

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Product specification

D-ESDB
Range of guaranteed shaft diameter precision (b1=L－x1)
x1 max.40
[ ! ]Nitriding may extend to the head as it is applied after dimension V and P machining.
[ ! ]When the diameter (P) portion of the stepped center pin is inserted into the relief hole (C), make surerelief hole (C) ≧ pin diameter (P)＋1.0
 
Type[ M ][ H ][ T ] VApplicable center pin shaft diameter tolerance
D-ESDB1.2344 equivalentBase Material: 50～55HRCH7-0.01
-0.02		*Note that for sleeves with V dimension tolerance of H7, combination
with center pins that have shaft diameter tolerance 0-0.005 is not
recommended. The reason for this is the fitting section S are longer.
 
[ T ]Pg6
P≦66.5≦P≦1012≦P≦16P＝20
－0.004
－0.012		－0.005
－0.014		－0.006
－0.017		－0.007
－0.020
 
[ T ]VH7
V≦3.03.1≦V≦6.06.1≦V≦10.0V≧10.1
+0.010
0		+0.012
0		+0.015
0		+0.018
0

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
D-ESDB4-[40-200/0.01]-P[3.5-3.99/0.01]-V[1.5-1.9/0.1]-C[2-2.4/0.1]-S[20-40/1]
D-ESDB4.5-[40-200/0.01]-P[4.01-4.49/0.01]-V[1.5-2.4/0.1]-C[2-2.9/0.1]-S[20-40/1]
D-ESDB5-[40-300/0.01]-P[4.51-4.99/0.01]-V[2-2.9/0.1]-C[2.5-3.4/0.1]-S[20-100/1]
D-ESDB5.5-[40-300/0.01]-P[5.01-5.49/0.01]-V[2-3.4/0.1]-C[2.5-3.9/0.1]-S[20-100/1]
D-ESDB6-[40-400/0.01]-P[5.51-5.99/0.01]-V[2-3.9/0.1]-C[2.5-4.4/0.1]-S[20-100/1]
D-ESDB6.5-[40-400/0.01]-P[6.01-6.49/0.01]-V[2-4.4/0.1]-C[2.5-4.9/0.1]-S[20-100/1]
D-ESDB7-[40-400/0.01]-P[6.51-6.99/0.01]-V[2-4.9/0.1]-C[2.5-5.4/0.1]-S[20-100/1]
D-ESDB7.5-[40-400/0.01]-P[7.01-7.49/0.01]-V[2-5.4/0.1]-C[2.5-5.9/0.1]-S[20-100/1]
D-ESDB8-[70-500/0.01]-P[7.51-7.99/0.01]-V[2.5-5.9/0.1]-C[3-6.4/0.1]-S[20-100/1]
D-ESDB9-[70-500/0.01]-P[8.01-8.99/0.01]-V[2.5-6.9/0.1]-C[3-7.4/0.1]-S[20-100/1]
D-ESDB10-[70-500/0.01]-P[9.01-9.99/0.01]-V[2.5-7.9/0.1]-C[3-8.4/0.1]-S[20-100/1]
D-ESDB12-[70-500/0.01]-P[10.01-11.99/0.01]-V[2.5-9.9/0.1]-C[3-10.4/0.1]-S[20-100/1]
D-ESDB12-[500.1-800/0.1]-P[10.01-11.99/0.01]-V[2.5-9.9/0.1]-C[3-10.4/0.1]-S[20-100/1]
D-ESDB15-[70-500/0.01]-P[12.01-14.99/0.01]-V[2.5-12/0.1]-C[3-13.4/0.1]-S[20-100/1]
D-ESDB15-[500.1-800/0.1]-P[12.01-14.99/0.01]-V[2.5-12/0.1]-C[3-13.4/0.1]-S[20-100/1]
D-ESDB16-[70-500/0.01]-P[15.01-15.99/0.01]-V[2.5-13/0.1]-C[3-14.4/0.1]-S[20-100/1]
D-ESDB16-[500.1-800/0.1]-P[15.01-15.99/0.01]-V[2.5-13/0.1]-C[3-14.4/0.1]-S[20-100/1]
D-ESDB20-[100-500/0.01]-P[16.01-19.99/0.01]-V[3-16/0.1]-C[3.5-18.4/0.1]-S[20-100/1]
D-ESDB20-[500.1-800/0.1]-P[16.01-19.99/0.01]-V[3-16/0.1]-C[3.5-18.4/0.1]-S[20-100/1]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
Head thickness Shaft diameter tolerance D/P (Shaft diameter)
(mm) 		V (Hole diameter)
(mm) 		L (L dimension)
(mm) 		C (Recess Diameter)
(㎜) 		S (V Hole Diameter Length)
(mm) 		P (Shaft Diameter)
1 17 Days 3mm-0.04/-0.01241.5 ～ 1.940 ～ 2002 ～ 2.420 ～ 403.5 ～ 3.99
1 17 Days 3mm-0.04/-0.0124.51.5 ～ 2.440 ～ 2002 ～ 2.920 ～ 404.01 ～ 4.49
1 17 Days 3mm-0.04/-0.01252 ～ 2.940 ～ 3002.5 ～ 3.420 ～ 1004.51 ～ 4.99
1 17 Days 3mm-0.04/-0.0125.52 ～ 3.440 ～ 3002.5 ～ 3.920 ～ 1005.01 ～ 5.49
1 17 Days 5mm-0.04/-0.01262 ～ 3.940 ～ 4002.5 ～ 4.420 ～ 1005.51 ～ 5.99
1 17 Days 5mm-0.005/-0.0146.52 ～ 4.440 ～ 4002.5 ～ 4.920 ～ 1006.01 ～ 6.49
1 17 Days 5mm-0.005/-0.01472 ～ 4.940 ～ 4002.5 ～ 5.420 ～ 1006.51 ～ 6.99
1 17 Days 5mm-0.005/-0.0147.52 ～ 5.440 ～ 4002.5 ～ 5.920 ～ 1007.01 ～ 7.49
1 17 Days 5mm-0.005/-0.01482.5 ～ 5.970 ～ 5003 ～ 6.420 ～ 1007.51 ～ 7.99
1 17 Days 5mm-0.005/-0.01492.5 ～ 6.970 ～ 5003 ～ 7.420 ～ 1008.01 ～ 8.99
1 17 Days 5mm-0.005/-0.014102.5 ～ 7.970 ～ 5003 ～ 8.420 ～ 1009.01 ～ 9.99
1 18 Days 7mm-0.006/-0.017122.5 ～ 9.970 ～ 5003 ～ 10.420 ～ 10010.01 ～ 11.99
1 18 Days 7mm-0.006/-0.017122.5 ～ 9.9500.1 ～ 8003 ～ 10.420 ～ 10010.01 ～ 11.99
1 18 Days 7mm-0.006/-0.017152.5 ～ 1270 ～ 5003 ～ 13.420 ～ 10012.01 ～ 14.99
1 18 Days 7mm-0.006/-0.017152.5 ～ 12500.1 ～ 8003 ～ 13.420 ～ 10012.01 ～ 14.99
1 18 Days 7mm-0.006/-0.017162.5 ～ 1370 ～ 5003 ～ 14.420 ～ 10015.01 ～ 15.99
1 18 Days 7mm-0.006/-0.017162.5 ～ 13500.1 ～ 8003 ～ 14.420 ～ 10015.01 ～ 15.99
1 18 Days 8mm-0.007/-0.020203 ～ 16100 ～ 5003.5 ～ 18.420 ～ 10016.01 ～ 19.99
1 18 Days 8mm-0.007/-0.020203 ～ 16500.1 ～ 8003.5 ～ 18.420 ～ 10016.01 ～ 19.99

Loading...

  1. 1

Specification table

HTPart No.LP
0.1mm
increments		V
0.1mm
increments		C
0.1mm
increments		Cmax.S
1mm
increments
TypeNo.0.01mm
increments		0.1mm
increments
83D-ESDB
(1.2344 equivalent
Hardened)		440.00～200.00-3.50～ 3.991.5～ 1.9C≧V＋0.5
and
C≦P－1.5

([ ! ]When L>300
0.5mm
increments)		2.420～100
([ ! ]No.4, No.4.5
When V1.5～V1.9
20～40)
4.54.01～ 4.491.5～ 2.42.9
10540.00～300.004.51～ 4.992.0～ 2.93.4
5.55.01～ 5.492.0～ 3.43.9
125640.00～400.005.51～ 5.992.0～ 3.94.4
6.56.01～ 6.492.0～ 4.44.9
76.51～ 6.992.0～ 4.95.4
7.57.01～ 7.492.0～ 5.45.9
14870.00～500.007.51～ 7.992.5～ 5.96.4 20～100 
98.01～ 8.992.5～ 6.97.4 L(L－S) min. 
16109.01～ 9.992.5～ 7.98.4 40.00～60.0020 
18712500.1 ～ 800.010.01～11.992.5～ 9.910.4 60.01～70.0030 
221512.01～14.992.5～12.012.5 70.01～80.0040 
1615.01～15.992.5～13.013.5 80.01～50 
26820100.00～500.0016.01～19.993.0～16.016.5    
[ ! ]V≦P－2.0

Order Example

             
 Part No.-L-P-V-C-S 
 D-ESDB 4-200-P3.5 V1.5-C2.0-S30 
             

Alteration

               
 Part No.-L-P-V-C-S-(KC・WKC…etc.) 
 D-ESDB 10-300-P9.1-V5.5-C6.2-S50-HC10 
               

Basic information

Brand MISUMI Product composition Single sleeve Material EN 1.2344 Equiv.
Surface treatment No Concentricity between the hole and shaft diameters ◎0.08 Inner dia. tolerance H7
Tapered or not No Center pin tip shape No Technical Standard DIN
Alterations With

Configure

Clear all

19Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Type

    • D-ESDB

    Clear

  • Head thickness

    • 3mm
    • 5mm
    • 7mm
    • 8mm

    Clear

  • Shaft diameter tolerance

    • -0.04/-0.012
    • -0.005/-0.014
    • -0.006/-0.017
    • -0.007/-0.020

    Clear

  • D/P (Shaft diameter)(mm)

    • 4
    • 4.5
    • 5
    • 5.5
    • 6
    • 6.5
    • 7
    • 7.5
    • 8
    • 9
    • 10
    • 12
    • 15
    • 16
    • 20

    Clear

  • V (Hole diameter)(mm)

     [1.5-16/0.1mm Unit(s)]

    Clear

  • L (L dimension)(mm)

     [500.1-800/0.1mm Unit(s)][40-500/0.01mm Unit(s)]

    Clear

  • C (Recess Diameter)(㎜)

     [2-18.4/0.1㎜ Unit(s)]

    Clear

  • S (V Hole Diameter Length)(mm)

     [20-100/1mm Unit(s)]

    Clear

  • P (Shaft Diameter)

     [3.5-3.99/0.01][4.01-4.49/0.01][4.51-4.99/0.01][5.01-5.49/0.01][5.51-5.99/0.01][6.01-6.49/0.01][6.51-6.99/0.01][7.01-7.49/0.01][7.51-7.99/0.01][8.01-8.99/0.01][9.01-9.99/0.01][10.01-11.99/0.01][12.01-14.99/0.01][15.01-15.99/0.01][16.01-19.99/0.01]

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 17 Days or Less
    • 18 Days or Less

    Reset

Optional Attributes

Tech Support

Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.