Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Material (Hardness) | Rail Length Type 1 | Number of Blocks 2 | Preload/Accuracy A | Lubrication Unit (MX) B Equipped/Not Equipped | Height (H) C | Grease D 3 | ||
---|---|---|---|---|---|---|---|---|
Light Preload | Slight Clearance | |||||||
High Grade | Precision Grade | Standard Grade | ||||||
Stainless Steel [EN 1.4125 Equiv.] (56HRC or more) | Standard length (Selectable) | 1 | SSELBN | SSELBNV | SSELBNZ | Blank: None -MX: Provided | 8 10 13 16 20 | Blank: Standard G: Grease G L: Grease L Y: Grease Y |
2 | SSEL2BN | SSEL2BNV | SSEL2BNZ | |||||
1 mm increments (Dimension Configurable) | 1 | SSELBNL | SSELBNLV | SSELBNLZ | ||||
2 | SSEL2BNL | SSEL2BNLV | SSEL2BNLZ |
1If the desired rail length is not available in the standard length (selectable), please specify the length in 1 mm increments (dimension configurable).
2If a 3- to 4-block product is desired, please select a part number for a 1-block product and specify "B3 (3 blocks)" or "B4 (4 blocks)" for alterations.
3*Only standard grease is available for the MX (with lubrication unit) type.
!Blocks and rails cannot be purchased separately.
!Heat resistance temperature is -20 to 80°C.
Part Number Configuration
Example: [Rail Length Type] 1 mm increments, [Number of Blocks] 2, [Accuracy/Preload] Light Preload, High Grade, [MX] Provided, [Height] 10, [Grease] Standard Grease
Type (Part Number) | Rail Length (L) |
Part Number | L 4 | Block Dimensions | Dowel Hole Dimensions | Rail Dimensions | ||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Type | MX | H | W | L1 | B | C | S × ? | L2 | K | Cb | N | C2 | (?1) | W1 | W2 | H1 | Ca | Counterbored Hole | F | G 6 | ||
d1 × d2 × h | ||||||||||||||||||||||
1 Block SSELBN SSELBNL SSELBNV SSELBNLV SSELBNZ SSELBNLZ RSELBN RSELBNL | 2 blocks SSEL2BN SSEL2BNL SSEL2BNV SSEL2BNLV SSEL2BNZ SSEL2BNLZ RSEL2BN RSEL2BNL | — | 8 | 40 to 310 (100) | 17 | 32 | 12 | 13 | M2 × 2.5 | 22 | 6.5 | 0.3 | 8.5 | 13 | 2 | 7 | 5 | 4.7 | 0.3 | 2.4 × 4.2 × 2.3 | 15 | 5 |
Blank: None -MX: Provided | 10 | 55 to 635 (115) | 20 | 40 | 15 | 16 | M3 × 3 | 29 | 7.8 | 0.3 | 10 | 16 | 2.5 | 9 | 5.5 | 5.5 | 0.3 | 3.5 × 6 × 3.5 | 20 | 7.5 | ||
13 | 70 to 970 (120) | 27 | 45.8 | 20 | 20 | M3 × 3.5 | 31.8 | 10 | 0.5 | 13.5 | 20 | 3 | 12 | 7.5 | 7.5 | 0.5 | 3.5 × 6 × 4.5 | 25 | 10 | |||
16 | 110 to 990 (150) | 32 | 58.3 | 25 | 25 | M3 × 4 | 43.3 | 12 | 0.5 | 16 | 25 | 4 | 15 | 8.5 | 9.5 | 0.5 | 3.5 × 6 × 4.5 | 40 | 15 | |||
20 | 160 to 1000 (220) | 40 | 67.7 | 30 | 30 | M4 × 6 | 52.3 | 15 | 0.5 | 20 | 30 | 4 | 20 | 10 | 11 | 0.5 | 6 × 9.5 × 5.5 | 60 | 20 |
4Dimensions in ( ) are for 2 Block Type.
5For 1 mm increments (Dimension Configurable), H20 will be up to 939 mm.
6For L Dimension Configurable Types, both ends of the rail are evenly cut. G dim. resulting from this cutting process will differ from those indicated on the above table.
!H8 comes with cap bolts (M2 × 6).
!Correctly match the datum planes (the side with the straight grooves) of both the rail and block.
Standard Rail Length (Selectable) List
The table below lists the standard rail lengths for each size. Please select the rail length from here.
Lengths not listed in the table below can be custom specified in 1 mm increments.
Height | Rail Length | ||||||||||||||||||||||||||||||||||||
(H) | (L) | ||||||||||||||||||||||||||||||||||||
8 | (40) | (55) | (70) | (85) | 100 | 115 | 130 | 145 | 160 | 175 | 190 | 205 | 220 | 235 | 250 | 265 | 280 | 295 | 310 | ||||||||||||||||||
10 | (55) | (75) | (95) | 115 | 135 | 155 | 175 | 195 | 215 | 235 | 255 | 275 | 295 | 315 | 335 | 355 | 375 | 395 | 415 | 435 | 455 | 475 | 495 | 515 | 535 | 555 | 575 | 595 | 615 | 635 | |||||||
13 | (70) | (95) | 120 | 145 | 170 | 195 | 220 | 245 | 270 | 295 | 320 | 345 | 370 | 395 | 420 | 445 | 470 | 495 | 520 | 545 | 570 | 595 | 620 | 645 | 670 | 695 | 720 | 745 | 770 | 795 | 820 | 845 | 870 | 895 | 920 | 945 | 970 |
16 | (110) | 150 | 190 | 230 | 270 | 310 | 350 | 390 | 430 | 470 | 510 | 550 | 590 | 630 | 670 | 710 | 750 | 790 | 830 | 870 | 910 | 950 | 990 | ||||||||||||||
20 | (160) | 220 | 280 | 340 | 400 | 460 | 520 | 580 | 640 | 700 | 760 | 820 | 880 | 940 | 1000 |
! The dimensions in ( ) are not available for the standard 2-block type.
kgf = N × 0.101972
Height (H) | Basic Load Rating 7 | Allowable Static Moment | Mass | |||||||
---|---|---|---|---|---|---|---|---|---|---|
C (Dynamic) kN | Co (Static) kN | Block 1 pc. | Block 2 pcs. in close contact 8 | Block kg | Guide Rail kg/m | |||||
MA N⋅m | MB N⋅m | MC N⋅m | MA N⋅m | MB N⋅m | MC N⋅m | |||||
8 | 1.6 | 2.4 | 7.5 | 7.5 | 9.0 | 22.9 | 22.9 | 18.0 | 0.016 | 0.19 |
10 | 2.2 | 3.7 | 12.3 | 12.3 | 13.0 | 46.4 | 46.4 | 26.0 | 0.03 | 0.31 |
13 | 3.5 | 5.3 | 24.5 | 26.4 | 32.3 | 73.9 | 73.9 | 64.6 | 0.06 | 0.61 |
16 | 5.8 | 8.7 | 57.8 | 62.6 | 67.6 | 172.1 | 172.1 | 135.2 | 0.10 | 1.02 |
20 | 7.2 | 13.5 | 80.7 | 80.7 | 138.2 | 203.2 | 203.2 | 276.4 | 0.18 | 1.65 |
7The basic load rating is the same for all four directions (radial, reverse-radial, and lateral directions) relating to blocks. Can be used in any orientation.
8The allowable static moment when two blocks are in close contact is not a guaranteed value but a reference value.
Static Safety Factor (Lower Limits of fs)
Condition of Use | Lower Limits of fs |
---|---|
For normal operating condition | 1 to 2 |
When smooth running performance is required | 2 to 4 |
When there is vibration or impact | 3 to 5 |
Allowable Load (N) ≤ Co/fs
Allowable Moment (N⋅m) ≤ (MA, MB, MC)/fs
fs: Static Safety Factor Co: Basic Static Load Rating
MA, MB, MC: Allowable Static Moment (N⋅m)
Code | Alterations | Specifications | Notes | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MC | Change rail counterbore holes to tapped holes | ·Changes the guide rail mounting holes from counterbored holes to tapped holes. | ! Not applicable for H dim. 8 ≥ 131, H dim. 10 ≥ 276, H dim. 13 ≥ 471, H dim. 16 ≥ 671, or H dim. 20 ≥ 701
| |||||||||||||
LLC RLC | LLC: Left End Cut RLC: Right End Cut | ·Cuts rail ends. ·Rails are cut with the engraved side as front (datum plane as back). (as shown in the image on the left) ·Please refer to the table below for the length of the rail to be cut.
| !The overall length will be shortened by the amount of cutting. Example: The L dimension of SSELBN13-95-LLC is 90 mm. !Applicable only to Selectable Type (standard rail length). !Not applicable to H8 and 20. | |||||||||||||
B3 B4 | B3: Additional Block (Total 3 pcs.) B4: Additional Block (Total 4 pcs.) 3-Block Specifications 4-Block Specifications | ·It will be shipped with 3 (4) blocks installed. ·There is a minimum length limit for the L dimension (rail length). Please refer to the table below "Shortest Selectable Rail Lengths for B3/B4." | !B4 (4 blocks) is not applicable to H dim. 8. !Please specify the part number for one block. (× SSEL2BN10-215-B4) |
H | B3 (3 blocks) | B4 (4 blocks) |
8 | 115 | — |
10 | 155 | 195 |
13 | 170 | 220 |
16 | 230 | 270 |
20 | 280 | 340 |
Position Retaining Parts | Block/Rail Fixing Parts | ||||
■Rail Push Plates | |||||
Rail Height Adjusting Blocks | |||||
■Linear Locks | |||||
Block Derailment Prevention Parts | |||||
■Stopper Bolts | ■Linear Guide Lock Units | ||||
Part Number | - | L | |
SSELBN10 SSELBN-MX10 SSELBN10L SSELBN10G | - - - - | 275 275 75 75 | (With Lubrication Unit) (L Type Greased) (G Type Greased) |
Part Number | L | Block Dimension | Dowel Hole Dimensions | Guide Rail Dimension | |||||||||||||||||
Type | MX | H | W | L1 | B | C | Sxℓ | L2 | K | Cb | N | C2 | (ℓ1) | W1 | W2 | H1 | Ca | Counterbored Hole | F | G | |
d1xd2xh | |||||||||||||||||||||
Dimensions in ( ) are for 2-Block Type. | - | 8 | 40~130 (100) | 17 | 32 | 12 | 13 | M2x2.5 | 22 | 6.5 | 0.3 | 8.5 | 13 | 2 | 7 | 5 | 4.7 | 0.3 | 2.4x4.2x2.3 | 15 | 5 |
SSELBN SSEL2BN SSELBNL SSEL2BNL | |||||||||||||||||||||
Blank: None -MX: Provided | 10 | 55~275 (115) | 20 | 40 | 15 | 16 | M3x3 | 29 | 7.8 | 0.3 | 10 | 16 | 2.5 | 9 | 5.5 | 5.5 | 0.3 | 3.5x6x3.5 | 20 | 7.5 | |
13 | 70~470 (120) | 27 | 45.8 | 20 | 20 | M3x3.5 | 31.8 | 10 | 0.5 | 13.5 | 20 | 3 | 12 | 7.5 | 7.5 | 0.5 | 3.5x6x4.5 | 25 | 10 | ||
16 | 110~670 (150) | 32 | 58.3 | 25 | 25 | M3x4 | 43.3 | 12 | 0.5 | 16 | 25 | 4 | 15 | 8.5 | 9.5 | 0.5 | 3.5x6x4.5 | 40 | 15 | ||
20 | 160~700 (220) | 40 | 67.7 | 30 | 30 | M4x6 | 52.3 | 15 | 0.5 | 20 | 30 | 4 | 20 | 10 | 11 | 0.5 | 6x9.5x5.5 | 60 | 20 |
3D preview is not available, because the part number has not yet been determined.
Part Number | Minimum order quantity | Volume Discount | RoHS | Rail Width W1 (mm) | Assembly Height H (mm) | No. of Blocks | Rail Length L (mm) | Preload | Accuracy Standards | Nominal Part Number | Lubrication Type | Basic Load Rating: Dynamic Load (N) | Basic Load Rating: Static Load (N) | Allowable Static Moment MA (Nm) | Allowable Static Moment MB (Nm) | Allowable Static Moment MC (Nm) | Grease Type | L Dimension Type | Surface Treatment | Nominal Part Number | Block Mounting Hole Pitch (Width Direction) (mm) | Block Mounting Hole Pitch (Longitudinal Direction) (mm) | Block Mounting Hole (Diameter) | Rail Mounting Hole (Pitch) (mm) | Rail Mounting Hole (Diameter) | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | 9 Days | - | 9 | 10 | 2 | 116 ~ 634 | [Clearance] Interchangeable, Slight Clearance | Standard Grade | - | Lubrication Applied | 2200 | 3700 | 12.3 | 12.3 | 13 | Lithium soap based grease (Standard) | Configurable Type | N/A | 9 | 15 | 16 | M3 | 20 | 3.5 | ||
1 | 9 Days | - | 12 | 13 | 2 | 121 ~ 969 | [Clearance] Interchangeable, Slight Clearance | Standard Grade | - | Lubrication Applied | 3500 | 5300 | 24.5 | 26.4 | 32.3 | Lithium soap based grease (Standard) | Configurable Type | N/A | 12 | 20 | 20 | M3 | 25 | 3.5 | ||
1 | 9 Days | - | 15 | 16 | 2 | 151 ~ 989 | [Clearance] Interchangeable, Slight Clearance | Standard Grade | - | Lubrication Applied | 5800 | 8700 | 57.8 | 62.6 | 67.6 | Lithium soap based grease (Standard) | Configurable Type | N/A | 15 | 25 | 25 | M3 | 40 | 3.5 | ||
1 | 9 Days | - | 20 | 20 | 2 | 221 ~ 939 | [Clearance] Interchangeable, Slight Clearance | Standard Grade | - | Lubrication Applied | 7200 | 13500 | 80.7 | 80.7 | 138.2 | Lithium soap based grease (Standard) | Configurable Type | N/A | 20 | 30 | 30 | M4 | 60 | 6 | ||
1 | 9 Days | - | 9 | 10 | 2 | 115 ~ 635 | [Clearance] Interchangeable, Slight Clearance | Standard Grade | - | Lubrication Applied | 2200 | 3700 | 12.3 | 12.3 | 13 | Lithium soap based grease (Standard) | Selectable Type | N/A | 9 | 15 | 16 | M3 | 20 | 3.5 | ||
1 | 9 Days | - | 12 | 13 | 2 | 120 ~ 970 | [Clearance] Interchangeable, Slight Clearance | Standard Grade | - | Lubrication Applied | 3500 | 5300 | 24.5 | 26.4 | 32.3 | Lithium soap based grease (Standard) | Selectable Type | N/A | 12 | 20 | 20 | M3 | 25 | 3.5 | ||
1 | 9 Days | - | 15 | 16 | 2 | 150 ~ 990 | [Clearance] Interchangeable, Slight Clearance | Standard Grade | - | Lubrication Applied | 5800 | 8700 | 57.8 | 62.6 | 67.6 | Lithium soap based grease (Standard) | Selectable Type | N/A | 15 | 25 | 25 | M3 | 40 | 3.5 | ||
1 | 9 Days | - | 20 | 20 | 2 | 220 ~ 1000 | [Clearance] Interchangeable, Slight Clearance | Standard Grade | - | Lubrication Applied | 7200 | 13500 | 80.7 | 80.7 | 138.2 | Lithium soap based grease (Standard) | Selectable Type | N/A | 20 | 30 | 30 | M4 | 60 | 6 | ||
1 | 9 Days | - | 9 | 10 | 1 | 56 ~ 634 | [Clearance] Interchangeable, Slight Clearance | Standard Grade | - | Lubrication Applied | 2200 | 3700 | 12.3 | 12.3 | 13 | Lithium soap based grease (Standard) | Configurable Type | N/A | 9 | 15 | 16 | M3 | 20 | 3.5 | ||
1 | 9 Days | - | 12 | 13 | 1 | 71 ~ 969 | [Clearance] Interchangeable, Slight Clearance | Standard Grade | - | Lubrication Applied | 3500 | 5300 | 24.5 | 26.4 | 32.3 | Lithium soap based grease (Standard) | Configurable Type | N/A | 12 | 20 | 20 | M3 | 25 | 3.5 | ||
1 | 9 Days | - | 15 | 16 | 1 | 111 ~ 989 | [Clearance] Interchangeable, Slight Clearance | Standard Grade | - | Lubrication Applied | 5800 | 8700 | 57.8 | 62.6 | 67.6 | Lithium soap based grease (Standard) | Configurable Type | N/A | 15 | 25 | 25 | M3 | 40 | 3.5 | ||
1 | 9 Days | - | 20 | 20 | 1 | 161 ~ 939 | [Clearance] Interchangeable, Slight Clearance | Standard Grade | - | Lubrication Applied | 7200 | 13500 | 80.7 | 80.7 | 138.2 | Lithium soap based grease (Standard) | Configurable Type | N/A | 20 | 30 | 30 | M4 | 60 | 6 | ||
1 | 9 Days | - | 9 | 10 | 1 | 55 ~ 635 | [Clearance] Interchangeable, Slight Clearance | Standard Grade | - | Lubrication Applied | 2200 | 3700 | 12.3 | 12.3 | 13 | Lithium soap based grease (Standard) | Selectable Type | N/A | 9 | 15 | 16 | M3 | 20 | 3.5 | ||
1 | 9 Days | - | 12 | 13 | 1 | 70 ~ 970 | [Clearance] Interchangeable, Slight Clearance | Standard Grade | - | Lubrication Applied | 3500 | 5300 | 24.5 | 26.4 | 32.3 | Lithium soap based grease (Standard) | Selectable Type | N/A | 12 | 20 | 20 | M3 | 25 | 3.5 | ||
1 | 9 Days | - | 15 | 16 | 1 | 110 ~ 990 | [Clearance] Interchangeable, Slight Clearance | Standard Grade | - | Lubrication Applied | 5800 | 8700 | 57.8 | 62.6 | 67.6 | Lithium soap based grease (Standard) | Selectable Type | N/A | 15 | 25 | 25 | M3 | 40 | 3.5 | ||
1 | 9 Days | - | 20 | 20 | 1 | 160 ~ 1000 | [Clearance] Interchangeable, Slight Clearance | Standard Grade | - | Lubrication Applied | 7200 | 13500 | 80.7 | 80.7 | 138.2 | Lithium soap based grease (Standard) | Selectable Type | N/A | 20 | 30 | 30 | M4 | 60 | 6 |
Loading...
kgf = N × 0.101972
| ■Preload and Accuracy Standards | Unit: µm
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Same block size as the existing product. The oil-impregnated porous core part has been built into the product. |
● Advantages of Lubrication Unit MX: Provides long term maintenance-free operation. Reduces maintenance cost. |
Position Retaining Parts | Block/Rail Fixing Parts | ||||
■Rail Push Plates | |||||
Rail Height Adjusting Blocks | |||||
■Linear Locks | |||||
Block Derailment Prevention Parts | |||||
■Stopper Bolts | ■Linear Guide Lock Units | ||||
- Mounting Example -
Conventional Type | With Dowel Holes |
Positioning on the basis of plate end face | Positioning using a dowel hole |
Set / Single Item | Set | Block Type | Long Block with Dowel Holes | Rail Type | Standard Rail |
---|---|---|---|---|---|
Material | Stainless Steel | Ball Arrangement | Miniature Type | Retainer | Not Provided |
Rolling Element | Balls |
Configure
Basic Attributes
Rail Width W1(mm)
Assembly Height H(mm)
No. of Blocks
Rail Length L(mm)
[56-989/1mm Unit(s)]
Accuracy Standards
Nominal Part Number
Lubrication Type
Grease Type
L Dimension Type
Surface Treatment
Nominal Part Number
Block Mounting Hole Pitch (Width Direction)(mm)
Block Mounting Hole Pitch (Longitudinal Direction)(mm)
Block Mounting Hole (Diameter)
Rail Mounting Hole (Pitch)(mm)
Rail Mounting Hole (Diameter)
Type
Preload
Filter by CAD data type
Filter by standard shipping days
Optional Attributes