Indexing Plungers / Compact / Return Type
- Volume Discount
- Order quantities extended (D-JIT)
(i)Remark
- When using the product by tightening, be sure to seat it with a chamfer or washer as described under More Information.
- Do not use a tool when tightening. Tighten by hand. (Excessive tightening may damage the thread of the screw.)
- Please check the content on our website as the PDF does not contain the most up-to-date information.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- More Information
- Catalog
| Type | Screw | Knob | Main Body | Pin | Spring | ||
| Returning | Rest Position | Material | Material | Surface Treatment | Material | Material | |
| PMXSB | PMXYSB | Coarse Thread | Nylon 6 | EN 1.1191 Equiv. | Black Oxide | EN 1.4305 Equiv. | EN 1.4301 (WPB) Equiv. |
| PMXSM | PMXYSM | Electroless Nickel Plating | |||||
Specifications
| Part Number |
| PMXSB10 |
| Part Number | Pitch (Coarse) | D | D1 | S | B | L | L1 | SW | R | Load (N) | Unit Price | ||||||
| Type | M | Returning | Rest Position | ||||||||||||||
| Returning | Rest Position | min | max | PMXSB | PMXSM | PMXYSB | PMXYSM | ||||||||||
| PMXSB PMXSM | PMXYSB PMXYSM | 8 | 1.25 | 20 | 14.5 | 5 | 5 | 25 | 5 | 13 | 3 | 2.5 | 6.0 | ||||
| 10 | 1.5 | 24 | 19 | 6 | 6 | 31 | 7 | 17 | 3.5 | 4.5 | 9.5 | ||||||
· There is a portion where the thread is incomplete, resulting in the clearance shown in the figure.
To eliminate this clearance, you can either (1) add the recommended C chamfer to the fixed side, or (2) use the recommended washer.
· When installing the plunger, turn the hex part by hand to avoid malfunction.
Type | Screw | M | Pitch | Recommended | ||
Returning Type | Rest Position Type | C Chamfer | Washer Thickness | |||
PMXSB | PMXYSB | Coarse Thread | 8 | 1.25 | 1.6 mm or more | |
PMXSM | PMXYSM | 10 | 1.5 | 2 mm or more | ||
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Part Number
|
|---|
| PMXSB8 |
| PMXSB10 |
| PMXSM8 |
| PMXSM10 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Locking Mechanism | Screw Dia. M (mm) | Stroke (S) (mm) | Main Body Surface Treatment | Tip Outer Dia. B (Ø) | Length L (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|
13.35 € | 1 | Available |
Same day
Stock | 10 | Returning | 8 | 5 | Black Oxide | 5 | 25 | |
16.38 € | 1 | Available |
Same day
Stock | 10 | Returning | 10 | 6 | Black Oxide | 6 | 31 | |
13.60 € | 1 | Available |
Same day
Stock | 10 | Returning | 8 | 5 | Electroless Nickel Plating | 5 | 25 | |
16.62 € | 1 | Available |
Same day
Stock | 10 | Returning | 10 | 6 | Electroless Nickel Plating | 6 | 31 |
Loading...
More Information
Basic information
| Type | Standard Type | Mounting Method | Screw-In | Overall Length | Short |
|---|---|---|---|---|---|
| Body Material | EN 1.1191 Equiv. | Pin Material | EN 1.4305 Equiv. | Knob | Provided |
| Pin Surface Treatment | Not Provided | Tip Heat Treatment | Not Provided |
Configure
Stock
-
- Show only stock items
Basic Attributes
-
Screw Dia. M(mm)
-
Stroke (S)(mm)
-
Main Body Surface Treatment
- Black Oxide
- Electroless Nickel Plating
-
Tip Outer Dia. B(Ø)
-
Length L(mm)
-
Type
- PMXSB
- PMXSM
- PMXYSB
- PMXYSM
-
Locking Mechanism
- With Locking Nose
- Returning
- With Locking Nose
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- Same day
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
MISUMI Unit еxample related to this product
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.