[Precision] X / Y / Z-Axis Selectable

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

[Precision] X/Y/Z-Axis Selectable:Related Image

Specifications

Part Number-Feed Position-Feeding Method-Clamp Type-Grease
FSXYR40-C-F-S-R
Part NumberStage Used
TypeAxisGuide
FSXRXSG (P.1921)
CXPG (P.1918)
XYRXYSG (P.1946)
ZRZSG (P.1966)
* Refer to the stage with the same size as the table.
Guide Type R: Linear Ball Slide
C: Cross Roller Slide

StageFeed PositionFeeding MethodClamp TypeGrease
AxisTypeSizeUnit PriceCenter/SideMicrometer Head (Stroke: mm)PriceFeed Screw
(Pitch/Stroke: mm)
PriceSelectionPriceSelectionPrice
X-AxisFSXR
(Linear Ball)
25 (Center): A, AR
: AZ, AZR
(Side) : C, CR
: CZ, CZR
N (Standard ±3.2)N:
M:
D:
F (Hex Socket 0.5/±3.2)
B (Feed Screw 0.5/±3.2)
F, B, J:S (Standard)S:
H:
P:
G (Standard)
R
(Clean Env. Compatible)*2
G:
R:
40N (Standard ±6.5)
M (Coarse Fine Feed ±6.5)
F (Hex Socket 0.5/±6.5)
B (Feed Screw 0.5/±6.5)
J (Feed Screw 1.0/±6.5)
S (Standard)
H (Disc)
P (Opposed) Applicable only when C and CR, and the feed type is N or F.
50
60
70
80N (Standard ±12.5)
M (Coarse Fine Feed ±6.5)
D (Digital Micrometer ±12.5)
*1. Only applicable to feed position A ,AR and C.
S (Standard)
H (Disc)
FSXC
(Cross Roller)
25


(Center): A, AR
: AZ
(Side) : C, CR
: CZ

*3
N (Standard ±3.2)N:
M:
B (Feed Screw 0.5/±3.2) B:S (Standard)S:G (Standard)G:
R:
40N (Standard ±6.5)
M (Coarse Fine Feed ±6.5)
60
80N (Standard ±12.5)
M (Coarse Fine Feed ±6.5)
XY-AxisFSXYR (Linear Ball)25 (Center): A, AR
(Side) : C, CR
N (Standard ±3.2)N:
M:
D:
F (Hex Socket 0.5/±3.2)
B (Feed Screw 0.5/±3.2)
F, B, J:S (Standard)S:
H:
P:
G (Standard)
R
(Clean Env. Compatible)*2
G:
R:
40N (Standard ±6.5)
M (Coarse Fine Feed ±6.5)
F (Hex Socket 0.5/±6.5)
B (Feed Screw 0.5/±6.5)
J (Feed Screw 1.0/±6.5)
S (Standard)
H (Disc) Only applicable to C, CR.
P (Opposed) Applicable only when C and CR, and the feed type is N or F.
50
60
70
80N (Standard ±12.5)
M (Coarse Fine Feed ±6.5)
D (Digital Micrometer ±12.5)
*1. Only applicable to feed position A and AR.
S (Standard)
H (Disc) Only applicable to C, CR.
Z-AxisFSZR
(Linear Ball)
25 (Center) : AZ,
AZR
(Side) : C, CR
: CZ,
CZR
Feeding direction of C, CR is upward; that of the others is downwards.
N (Standard ±3.2)N:
M:
F (Hex Socket 0.5/±3.2)
B
(Feed Screw 0.5/±3.2)
F, B, J:S (Standard)S:
H:
P:
G (Standard)
R
(Clean Env. Compatible)*2
G:
R:
40N (Standard ±6.5)
M
(Coarse Fine Feed ±6.5) Not applicable to C, CR.
F (Hex Socket 0.5/±6.5)
B
(Feed Screw 0.5/±6.5)
J
(Feed Screw 1.0/±6.5)
S (Standard)
H
(Disc)
P
(Opposed) Applicable only when C and CR, and the feed type is N or F.
50
60
70
80N (Standard ±12.5)
M
(Coarse Fine Feed ±6.5) Not applicable to C, CR.
S (Standard)
H
(Disc)
*1. Only clamp position will be changed for Digital Micrometer A and AR. *2. When feed type M (coarse/fine feeds) or D (digital micrometer) is selected, grease R (clean env. compatible) is not applicable. *3. Combination with M, B is not available for cross roller stages AZ and CZ. Combination with B is not available for cross roller stages with Table Size 80.

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...
Part Number
FSXC40-A-[B,​M,​N]-S-G
FSXC40-AR-[B,​M,​N]-S-G
FSXC40-AZ-N-S-G
FSXC40-C-[B,​M,​N]-S-G
FSXC40-CR-[B,​M,​N]-S-G
FSXC40-CZ-N-S-G
FSXR40-A-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR40-AR-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR40-AZ-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR40-AZR-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR40-C-[B,​F,​J,​M,​N]-[H,​P,​S]-[G,​R]
FSXR40-CR-[B,​F,​J,​M,​N]-[H,​P,​S]-[G,​R]
FSXR40-CZ-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR40-CZR-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXYR40-A-[B,​F,​J,​M,​N]-S-[G,​R]
FSXYR40-AR-[B,​F,​J,​M,​N]-S-[G,​R]
FSXYR40-C-[B,​F,​J,​M,​N]-[H,​P,​S]-[G,​R]
FSXYR40-CR-[B,​F,​J,​M,​N]-[H,​P,​S]-[G,​R]
FSZR40-AZ-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSZR40-AZR-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSZR40-C-[B,​F,​J,​N]-[H,​P,​S]-[G,​R]
FSZR40-CR-[B,​F,​J,​N]-[H,​P,​S]-[G,​R]
FSZR40-CZ-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSZR40-CZR-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSTable Size (Length) L (Range Selectable)
(mm)
Table Size (Width) W (Range Selectable)
(mm)
Load Capacity (Range Selectable)
(N)
Stroke (Distance along X-Axis) (Range Selectable)
(mm)
Stroke (Distance along Y-Axis) (Range Selectable)
(mm)
Table Material Table Surface Treatment Guiding Mechanism Table Size (Thickness) H (Range Selectable)
(mm)
Table Size (Length) L
(mm)
Table Size (Width) W
(mm)
Horizontal Load Capacity
(N)
Stroke (X Distance)
(mm)
Stroke (Y Distance)
(mm)
Table Size (Thickness) H
(mm)
Stroke (Z Distance)
(mm)
Table Parallelism
(µm)
Moment Rigidity (Pitching)
("/N•cm)
Moment Rigidity (Yawing)
("/N•cm)
Moment Rigidity (Rolling)
("/N•cm)
Feed Knob Position Reversed Grease Selection Clamp Method Selection Feeding Method Selection
1 9 Days 1026-4026-405 to 30Up to ±10mm-Aluminum AlloyBlack Anodized AluminumCross Roller15.1-20404019.6±6.5-20-300.380.420.28CenterStandardG (Standard)Standard [S]Feed Screw Pitch 0.5 [B] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1 9 Days 1026-4026-405 to 30Up to ±10mm-Aluminum AlloyBlack Anodized AluminumCross Roller15.1-20404019.6±6.5-20-300.380.420.28CenterRight and LeftG (Standard)Standard [S]Feed Screw Pitch 0.5 [B] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1 9 Days 1026-4026-405 to 30Up to ±10mm-Aluminum AlloyBlack Anodized AluminumCross Roller15.1-20404019.6±6.5-20-300.380.420.28CenterUp/DownG (Standard)Standard [S]Standard Micrometer Head [N]
1 9 Days 1026-4026-405 to 30Up to ±10mm-Aluminum AlloyBlack Anodized AluminumCross Roller15.1-20404019.6±6.5-20-300.380.420.28SideStandardG (Standard)Standard [S]Feed Screw Pitch 0.5 [B] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1 9 Days 1026-4026-405 to 30Up to ±10mm-Aluminum AlloyBlack Anodized AluminumCross Roller15.1-20404019.6±6.5-20-300.380.420.28SideRight and LeftG (Standard)Standard [S]Feed Screw Pitch 0.5 [B] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1 9 Days 1026-4026-405 to 30Up to ±10mm-Aluminum AlloyBlack Anodized AluminumCross Roller15.1-20404019.6±6.5-20-300.380.420.28SideUp/DownG (Standard)Standard [S]Standard Micrometer Head [N]
1 9 Days 1026-4026-4050.1 to 100Up to ±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-20404098±6.5-16-150.420.350.21CenterStandardG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1 9 Days 1026-4026-4050.1 to 100Up to ±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-20404098±6.5-16-150.420.350.21CenterRight and LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1 9 Days 1026-4026-4050.1 to 100Up to ±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-20404098±6.5-16-150.420.350.21CenterUp/DownG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1 9 Days 1026-4026-4050.1 to 100Up to ±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-20404098±6.5-16-150.420.350.21CenterTop/Bottom, Right/LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1 9 Days 1026-4026-4050.1 to 100Up to ±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-20404098±6.5-16-150.420.350.21SideStandardG (Standard) / R (For Clean Environment)Disc Clamp [H] / Opposed Clamp [P] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1 9 Days 1026-4026-4050.1 to 100Up to ±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-20404098±6.5-16-150.420.350.21SideRight and LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Opposed Clamp [P] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1 9 Days 1026-4026-4050.1 to 100Up to ±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-20404098±6.5-16-150.420.350.21SideUp/DownG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1 9 Days 1026-4026-4050.1 to 100Up to ±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-20404098±6.5-16-150.420.350.21SideTop/Bottom, Right/LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1 9 Days 1026-4026-4050.1 to 100Up to ±10mmUp to ±10mm[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball30.1-35404095.2±6.5±6.532-300.630.70.63CenterStandardG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1 9 Days 1026-4026-4050.1 to 100Up to ±10mmUp to ±10mm[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball30.1-35404095.2±6.5±6.532-300.630.70.63CenterRight and LeftG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1 9 Days 1026-4026-4050.1 to 100Up to ±10mmUp to ±10mm[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball30.1-35404095.2±6.5±6.532-300.630.70.63SideStandardG (Standard) / R (For Clean Environment)Disc Clamp [H] / Opposed Clamp [P] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1 9 Days 1026-4026-4050.1 to 100Up to ±10mmUp to ±10mm[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball30.1-35404095.2±6.5±6.532-300.630.70.63SideRight and LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Opposed Clamp [P] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1 9 Days 1026-4026-4030.1 to 50--[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball-404049---±6.5-0.420.350.21CenterUp/DownG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1 9 Days 1026-4026-4030.1 to 50--[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball-404049---±6.5-0.420.350.21CenterTop/Bottom, Right/LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1 9 Days 1026-4026-4030.1 to 50--[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball-404049---±6.5-0.420.350.21SideStandardG (Standard) / R (For Clean Environment)Disc Clamp [H] / Opposed Clamp [P] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Standard Micrometer Head [N]
1 9 Days 1026-4026-4030.1 to 50--[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball-404049---±6.5-0.420.350.21SideRight and LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Opposed Clamp [P] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Standard Micrometer Head [N]
1 9 Days 1026-4026-4030.1 to 50--[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball-404049---±6.5-0.420.350.21SideUp/DownG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]
1 9 Days 1026-4026-4030.1 to 50--[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball-404049---±6.5-0.420.350.21SideTop/Bottom, Right/LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

Loading...

  1. 1

More Information

[Precision] X/Y/Z-Axis Selectable:Related Image
Knob Cover HDCVR13 (Sold Separately): Ø13 micrometer knob diameter can be increased by installing the cover. Here
Extension Cover HDEXT13 (Sold Separately): Feed knob of Ø13 micrometer head and feed screw can be extended. Here

Basic information

Through Hole (Table Center Hole) Not Provided

Complementary Products

Tech Support

Technical Support
Tel:+49 69 668173-0 / FAX:+49 69 668173-360