• Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 0:00 to 16:00 (CET) 25/2/2018. We apologize for the inconvenience.

[Precision] X/Y/Z-Axis Selectable (Part Numbers)

[Precision] X/Y/Z-Axis Selectable

Click on this image to zoom in.

Click on this image to zoom in.

  • [Precision] X/Y/Z-Axis Selectable
  • [Precision] X/Y/Z-Axis Selectable
  • [Precision] X/Y/Z-Axis Selectable
  • [Precision] X/Y/Z-Axis Selectable
  • [Precision] X/Y/Z-Axis Selectable
  • [Precision] X/Y/Z-Axis Selectable

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

[Precision] X/Y/Z-Axis Selectable:Related Image

Specifications

Part Number-Feed Position-Feeding Method-Clamp Type-Grease
FSXYR40-C-F-S-R
Part NumberStage Used
TypeAxisGuide
FSXRXSG (P.1921)
CXPG (P.1918)
XYRXYSG (P.1946)
ZRZSG (P.1966)
* Refer to the stage with the same size as the table.
Guide Type R: Linear Ball Slide
C: Cross Roller Slide

StageFeed PositionFeeding MethodClamp TypeGrease
AxisTypeSizeUnit PriceCenter/SideMicrometer Head (Stroke: mm)PriceFeed Screw
(Pitch/Stroke: mm)
PriceSelectionPriceSelectionPrice
X-AxisFSXR
(Linear Ball)
25 (Center): A, AR
: AZ, AZR
(Side) : C, CR
: CZ, CZR
N (Standard ±3.2)N:
M:
D:
F (Hex Socket 0.5/±3.2)
B (Feed Screw 0.5/±3.2)
F, B, J:S (Standard)S:
H:
P:
G (Standard)
R
(Clean Env. Compatible)*2
G:
R:
40N (Standard ±6.5)
M (Coarse Fine Feed ±6.5)
F (Hex Socket 0.5/±6.5)
B (Feed Screw 0.5/±6.5)
J (Feed Screw 1.0/±6.5)
S (Standard)
H (Disc)
P (Opposed) Applicable only when C and CR, and the feed type is N or F.
50
60
70
80N (Standard ±12.5)
M (Coarse Fine Feed ±6.5)
D (Digital Micrometer ±12.5)
*1. Only applicable to feed position A ,AR and C.
S (Standard)
H (Disc)
FSXC
(Cross Roller)
25


(Center): A, AR
: AZ
(Side) : C, CR
: CZ

*3
N (Standard ±3.2)N:
M:
B (Feed Screw 0.5/±3.2) B:S (Standard)S:G (Standard)G:
R:
40N (Standard ±6.5)
M (Coarse Fine Feed ±6.5)
60
80N (Standard ±12.5)
M (Coarse Fine Feed ±6.5)
XY-AxisFSXYR (Linear Ball)25 (Center): A, AR
(Side) : C, CR
N (Standard ±3.2)N:
M:
D:
F (Hex Socket 0.5/±3.2)
B (Feed Screw 0.5/±3.2)
F, B, J:S (Standard)S:
H:
P:
G (Standard)
R
(Clean Env. Compatible)*2
G:
R:
40N (Standard ±6.5)
M (Coarse Fine Feed ±6.5)
F (Hex Socket 0.5/±6.5)
B (Feed Screw 0.5/±6.5)
J (Feed Screw 1.0/±6.5)
S (Standard)
H (Disc) Only applicable to C, CR.
P (Opposed) Applicable only when C and CR, and the feed type is N or F.
50
60
70
80N (Standard ±12.5)
M (Coarse Fine Feed ±6.5)
D (Digital Micrometer ±12.5)
*1. Only applicable to feed position A and AR.
S (Standard)
H (Disc) Only applicable to C, CR.
Z-AxisFSZR
(Linear Ball)
25 (Center) : AZ,
AZR
(Side) : C, CR
: CZ,
CZR
Feeding direction of C, CR is upward; that of the others is downwards.
N (Standard ±3.2)N:
M:
F (Hex Socket 0.5/±3.2)
B
(Feed Screw 0.5/±3.2)
F, B, J:S (Standard)S:
H:
P:
G (Standard)
R
(Clean Env. Compatible)*2
G:
R:
40N (Standard ±6.5)
M
(Coarse Fine Feed ±6.5) Not applicable to C, CR.
F (Hex Socket 0.5/±6.5)
B
(Feed Screw 0.5/±6.5)
J
(Feed Screw 1.0/±6.5)
S (Standard)
H
(Disc)
P
(Opposed) Applicable only when C and CR, and the feed type is N or F.
50
60
70
80N (Standard ±12.5)
M
(Coarse Fine Feed ±6.5) Not applicable to C, CR.
S (Standard)
H
(Disc)
*1. Only clamp position will be changed for Digital Micrometer A and AR. *2. When feed type M (coarse/fine feeds) or D (digital micrometer) is selected, grease R (clean env. compatible) is not applicable. *3. Combination with M, B is not available for cross roller stages AZ and CZ. Combination with B is not available for cross roller stages with Table Size 80.

Part Number:  

  • Incomplete part number.
    Please use left hand selections to complete a part number.
Loading...
Part Number
FSXC25-A-[B,​N]-S-G
FSXC25-AR-[B,​N]-S-G
FSXC25-AZ-N-S-G
FSXC25-C-[B,​N]-S-G
FSXC25-CR-[B,​N]-S-G
FSXC25-CZ-N-S-G
FSXC40-A-[B,​M,​N]-S-G
FSXC40-AR-[B,​M,​N]-S-G
FSXC40-AZ-N-S-G
FSXC40-C-[B,​M,​N]-S-G
FSXC40-CR-[B,​M,​N]-S-G
FSXC40-CZ-N-S-G
FSXC60-A-[B,​M,​N]-S-G
FSXC60-AR-[B,​M,​N]-S-G
FSXC60-AZ-N-S-G
FSXC60-C-[B,​M,​N]-S-G
FSXC60-CR-[B,​M,​N]-S-G
FSXC60-CZ-N-S-G
FSXC80-A-[M,​N]-S-G
FSXC80-AR-[M,​N]-S-G
FSXC80-AZ-N-S-G
FSXC80-C-[M,​N]-S-G
FSXC80-CR-[M,​N]-S-G
FSXC80-CZ-N-S-G
FSXR25-A-[B,​F,​N]-S-[G,​R]
FSXR25-AR-[B,​F,​N]-S-[G,​R]
FSXR25-AZ-[B,​F,​N]-S-[G,​R]
FSXR25-AZR-[B,​F,​N]-S-[G,​R]
FSXR25-C-[B,​F,​N]-S-[G,​R]
FSXR25-CR-[B,​F,​N]-S-[G,​R]
FSXR25-CZ-[B,​F,​N]-S-[G,​R]
FSXR25-CZR-[B,​F,​N]-S-[G,​R]
FSXR40-A-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR40-AR-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR40-AZ-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR40-AZR-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR40-C-[B,​F,​J,​M,​N]-[H,​P,​S]-[G,​R]
FSXR40-CR-[B,​F,​J,​M,​N]-[H,​P,​S]-[G,​R]
FSXR40-CZ-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR40-CZR-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR50-A-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR50-AR-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR50-AZ-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR50-AZR-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR50-C-[B,​F,​J,​M,​N]-[H,​P,​S]-[G,​R]
FSXR50-CR-[B,​F,​J,​M,​N]-[H,​P,​S]-[G,​R]
FSXR50-CZ-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR50-CZR-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR60-A-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR60-AR-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR60-AZ-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR60-AZR-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR60-C-[B,​F,​J,​M,​N]-[H,​P,​S]-[G,​R]
FSXR60-CR-[B,​F,​J,​M,​N]-[H,​P,​S]-[G,​R]
FSXR60-CZ-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR60-CZR-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR70-A-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR70-AR-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR70-AZ-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
FSXR70-AZR-[B,​F,​J,​M,​N]-[H,​S]-[G,​R]
Part NumberStandard Unit PriceVolume DiscountShipping Days?RoHSTable Size (Length) L (Range Selectable)
(mm)
Table Size (Width) W (Range Selectable)
(mm)
Load Capacity (Range Selectable)
(N)
Stroke (Distance along X-Axis) (Range Selectable)
(mm)
Stroke (Distance along Y-Axis) (Range Selectable)
(mm)
Table Material Table Surface Treatment Guiding Mechanism Table Size (Thickness) H (Range Selectable)
(mm)
Table Size (Length) L
(mm)
Table Size (Width) W
(mm)
Horizontal Load Capacity
(N)
Stroke (X Distance)
(mm)
Stroke (Y Distance)
(mm)
Table Size (Thickness) H
(mm)
Stroke (Z Distance)
(mm)
Table Parallelism
(µm)
Moment Rigidity (Pitching)
("/N•cm)
Moment Rigidity (Yawing)
("/N•cm)
Moment Rigidity (Rolling)
("/N•cm)
Feed Knob Position Reversed Grease Selection Clamp Method Selection Feeding Method Selection

-

7 Days Fully Compliant≤ 25≤ 255-30≤±10mm-Aluminum AlloyBlack AnodizeCross Roller1-1525259.8±3.2-15-303.032.851.80CenterStandardG (Standard)Standard [S]Feed Screw Pitch 0.5 [B] / Standard Micrometer Head [N]

-

7 Days Fully Compliant≤ 25≤ 255-30≤±10mm-Aluminum AlloyBlack AnodizeCross Roller1-1525259.8±3.2-15-303.032.851.80CenterRight and LeftG (Standard)Standard [S]Feed Screw Pitch 0.5 [B] / Standard Micrometer Head [N]

-

7 Days Fully Compliant≤ 25≤ 255-30≤±10mm-Aluminum AlloyBlack AnodizeCross Roller1-1525259.8±3.2-15-303.032.851.80CenterUp/DownG (Standard)Standard [S]Standard Micrometer Head [N]

-

7 Days Fully Compliant≤ 25≤ 255-30≤±10mm-Aluminum AlloyBlack AnodizeCross Roller1-1525259.8±3.2-15-303.032.851.80SideStandardG (Standard)Standard [S]Feed Screw Pitch 0.5 [B] / Standard Micrometer Head [N]

-

7 Days Fully Compliant≤ 25≤ 255-30≤±10mm-Aluminum AlloyBlack AnodizeCross Roller1-1525259.8±3.2-15-303.032.851.80SideRight and LeftG (Standard)Standard [S]Feed Screw Pitch 0.5 [B] / Standard Micrometer Head [N]

-

7 Days Fully Compliant≤ 25≤ 255-30≤±10mm-Aluminum AlloyBlack AnodizeCross Roller1-1525259.8±3.2-15-303.032.851.80SideUp/DownG (Standard)Standard [S]Standard Micrometer Head [N]

-

7 Days Fully Compliant26-4026-405-30≤±10mm-Aluminum AlloyBlack AnodizeCross Roller15.1-20404019.6±6.5-20-300.380.420.28CenterStandardG (Standard)Standard [S]Feed Screw Pitch 0.5 [B] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant26-4026-405-30≤±10mm-Aluminum AlloyBlack AnodizeCross Roller15.1-20404019.6±6.5-20-300.380.420.28CenterRight and LeftG (Standard)Standard [S]Feed Screw Pitch 0.5 [B] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant26-4026-405-30≤±10mm-Aluminum AlloyBlack AnodizeCross Roller15.1-20404019.6±6.5-20-300.380.420.28CenterUp/DownG (Standard)Standard [S]Standard Micrometer Head [N]

-

7 Days Fully Compliant26-4026-405-30≤±10mm-Aluminum AlloyBlack AnodizeCross Roller15.1-20404019.6±6.5-20-300.380.420.28SideStandardG (Standard)Standard [S]Feed Screw Pitch 0.5 [B] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant26-4026-405-30≤±10mm-Aluminum AlloyBlack AnodizeCross Roller15.1-20404019.6±6.5-20-300.380.420.28SideRight and LeftG (Standard)Standard [S]Feed Screw Pitch 0.5 [B] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant26-4026-405-30≤±10mm-Aluminum AlloyBlack AnodizeCross Roller15.1-20404019.6±6.5-20-300.380.420.28SideUp/DownG (Standard)Standard [S]Standard Micrometer Head [N]

-

7 Days Fully Compliant41-6041-6030.1-50≤±10mm-Aluminum AlloyBlack AnodizeCross Roller15.1-20606049±6.5-20-300.120.110.07CenterStandardG (Standard)Standard [S]Feed Screw Pitch 0.5 [B] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant41-6041-6030.1-50≤±10mm-Aluminum AlloyBlack AnodizeCross Roller15.1-20606049±6.5-20-300.120.110.07CenterRight and LeftG (Standard)Standard [S]Feed Screw Pitch 0.5 [B] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant41-6041-6030.1-50≤±10mm-Aluminum AlloyBlack AnodizeCross Roller15.1-20606049±6.5-20-300.120.110.07CenterUp/DownG (Standard)Standard [S]Standard Micrometer Head [N]

-

7 Days Fully Compliant41-6041-6030.1-50≤±10mm-Aluminum AlloyBlack AnodizeCross Roller15.1-20606049±6.5-20-300.120.110.07SideStandardG (Standard)Standard [S]Feed Screw Pitch 0.5 [B] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant41-6041-6030.1-50≤±10mm-Aluminum AlloyBlack AnodizeCross Roller15.1-20606049±6.5-20-300.120.110.07SideRight and LeftG (Standard)Standard [S]Feed Screw Pitch 0.5 [B] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant41-6041-6030.1-50≤±10mm-Aluminum AlloyBlack AnodizeCross Roller15.1-20606049±6.5-20-300.120.110.07SideUp/DownG (Standard)Standard [S]Standard Micrometer Head [N]

-

7 Days Fully Compliant61-9061-9050.1-100±10-30mm-Aluminum AlloyBlack AnodizeCross Roller15.1-20808098±12.5-20-300.050.050.04CenterStandardG (Standard)Standard [S]Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant61-9061-9050.1-100±10-30mm-Aluminum AlloyBlack AnodizeCross Roller15.1-20808098±12.5-20-300.050.050.04CenterRight and LeftG (Standard)Standard [S]Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant61-9061-9050.1-100±10-30mm-Aluminum AlloyBlack AnodizeCross Roller15.1-20808098±12.5-20-300.050.050.04CenterUp/DownG (Standard)Standard [S]Standard Micrometer Head [N]

-

7 Days Fully Compliant61-9061-9050.1-100±10-30mm-Aluminum AlloyBlack AnodizeCross Roller15.1-20808098±12.5-20-300.050.050.04SideStandardG (Standard)Standard [S]Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant61-9061-9050.1-100±10-30mm-Aluminum AlloyBlack AnodizeCross Roller15.1-20808098±12.5-20-300.050.050.04SideRight and LeftG (Standard)Standard [S]Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant61-9061-9050.1-100±10-30mm-Aluminum AlloyBlack AnodizeCross Roller15.1-20808098±12.5-20-300.050.050.04SideUp/DownG (Standard)Standard [S]Standard Micrometer Head [N]

-

7 Days Fully Compliant≤ 25≤ 2530.1-50≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball1-15252539.2±3.2-12-301.91.11.1CenterStandardG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N]

-

7 Days Fully Compliant≤ 25≤ 2530.1-50≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball1-15252539.2±3.2-12-301.91.11.1CenterRight and LeftG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N]

-

7 Days Fully Compliant≤ 25≤ 2530.1-50≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball1-15252539.2±3.2-12-301.91.11.1CenterUp/DownG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N]

-

7 Days Fully Compliant≤ 25≤ 2530.1-50≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball1-15252539.2±3.2-12-301.91.11.1CenterTop/Bottom, Right/LeftG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N]

-

7 Days Fully Compliant≤ 25≤ 2530.1-50≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball1-15252539.2±3.2-12-301.91.11.1SideStandardG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N]

-

7 Days Fully Compliant≤ 25≤ 2530.1-50≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball1-15252539.2±3.2-12-301.91.11.1SideRight and LeftG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N]

-

7 Days Fully Compliant≤ 25≤ 2530.1-50≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball1-15252539.2±3.2-12-301.91.11.1SideUp/DownG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N]

-

7 Days Fully Compliant≤ 25≤ 2530.1-50≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball1-15252539.2±3.2-12-301.91.11.1SideTop/Bottom, Right/LeftG (Standard) / R (For Clean Environment)Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Standard Micrometer Head [N]

-

7 Days Fully Compliant26-4026-4050.1-100≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-20404098±6.5-16-150.420.350.21CenterStandardG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant26-4026-4050.1-100≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-20404098±6.5-16-150.420.350.21CenterRight and LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant26-4026-4050.1-100≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-20404098±6.5-16-150.420.350.21CenterUp/DownG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant26-4026-4050.1-100≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-20404098±6.5-16-150.420.350.21CenterTop/Bottom, Right/LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant26-4026-4050.1-100≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-20404098±6.5-16-150.420.350.21SideStandardG (Standard) / R (For Clean Environment)Disc Clamp [H] / Opposed Clamp [P] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant26-4026-4050.1-100≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-20404098±6.5-16-150.420.350.21SideRight and LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Opposed Clamp [P] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant26-4026-4050.1-100≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-20404098±6.5-16-150.420.350.21SideUp/DownG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant26-4026-4050.1-100≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-20404098±6.5-16-150.420.350.21SideTop/Bottom, Right/LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant41-6041-60> 100.1≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-205050147±6.5-16-150.150.140.09CenterStandardG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant41-6041-60> 100.1≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-205050147±6.5-16-150.150.140.09CenterRight and LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant41-6041-60> 100.1≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-205050147±6.5-16-150.150.140.09CenterUp/DownG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant41-6041-60> 100.1≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-205050147±6.5-16-150.150.140.09CenterTop/Bottom, Right/LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant41-6041-60> 100.1≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-205050147±6.5-16-150.150.140.09SideStandardG (Standard) / R (For Clean Environment)Disc Clamp [H] / Opposed Clamp [P] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant41-6041-60> 100.1≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-205050147±6.5-16-150.150.140.09SideRight and LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Opposed Clamp [P] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant41-6041-60> 100.1≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-205050147±6.5-16-150.150.140.09SideUp/DownG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant41-6041-60> 100.1≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-205050147±6.5-16-150.150.140.09SideTop/Bottom, Right/LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant41-6041-60> 100.1≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-206060196±6.5-16-150.080.080.05CenterStandardG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant41-6041-60> 100.1≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-206060196±6.5-16-150.080.080.05CenterRight and LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant41-6041-60> 100.1≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-206060196±6.5-16-150.080.080.05CenterUp/DownG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant41-6041-60> 100.1≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-206060196±6.5-16-150.080.080.05CenterTop/Bottom, Right/LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant41-6041-60> 100.1≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-206060196±6.5-16-150.080.080.05SideStandardG (Standard) / R (For Clean Environment)Disc Clamp [H] / Opposed Clamp [P] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant41-6041-60> 100.1≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-206060196±6.5-16-150.080.080.05SideRight and LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Opposed Clamp [P] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant41-6041-60> 100.1≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-206060196±6.5-16-150.080.080.05SideUp/DownG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant41-6041-60> 100.1≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-206060196±6.5-16-150.080.080.05SideTop/Bottom, Right/LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant61-9061-90> 100.1≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-207070225.4±6.5-18-150.060.050.03CenterStandardG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant61-9061-90> 100.1≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-207070225.4±6.5-18-150.060.050.03CenterRight and LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant61-9061-90> 100.1≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-207070225.4±6.5-18-150.060.050.03CenterUp/DownG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

-

7 Days Fully Compliant61-9061-90> 100.1≤±10mm-[Stainless Steel] EN 1.4125 Equiv.Electroless Nickel PlatingLinear Ball15.1-207070225.4±6.5-18-150.060.050.03CenterTop/Bottom, Right/LeftG (Standard) / R (For Clean Environment)Disc Clamp [H] / Standard [S]Feed Screw Pitch 0.5 [B] / Screw with Hex Socket, Pitch 0.5 [F] / Feed Screw Pitch 1.0 [J] / Coarse/Fine Micrometer Head [M] / Standard Micrometer Head [N]

Loading...

More Information

[Precision] X/Y/Z-Axis Selectable:Related Image
Knob Cover HDCVR13 (Sold Separately): Ø13 micrometer knob diameter can be increased by installing the cover. Here
Extension Cover HDEXT13 (Sold Separately): Feed knob of Ø13 micrometer head and feed screw can be extended. Here

Basic information

Through Hole (Table Center Hole) Not Provided

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also

Tech Support