Air Manifold Block -T-Shaped Hole Type- (Part Numbers - CAD Download)
- Order quantities extended (D-JIT)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
| Type | Material | Surface Treatment | Max. Operating Pressure | ||||||
| Pitch (P) Standard | Pitch (P) Configurable | ||||||||
| 20 Sq. | 25 Sq. | 35 Sq. | 50 Sq. | 20 Sq. | 25 Sq. | 35 Sq. | |||
| BMGFC | BMGF | BMGFK | BMGFL | BMGFCP | BMGFP | BMGFKP | Aluminum Alloy 5000 series | - | 1MPa≈10kgf/cm2 or less |
| BMGFCA | BMGFA | - | BMGFLA | BMGFCAP | BMGFAP | - | Clear Anodize | ||
Specifications
| Part Number | - | Q | - | R | - | S | - | P | ||||||
| Type | Mounting Hole Change | Number of Circuits | ||||||||||||
| BMGF BMGFP G-BMGFP | T ZT ZT | 4 4 4 | - - - | Q2 Q2 Q2 | - - - | R5 R2 R2 | - - - | S2 S2 S2 | - - | P50 P50 | (G Thread) | |||
| Part Number | Rc (PT), NPT, M (Coarse) Selection | Pitch P | Number of Pitches N | Total Number of Q, R and S Threads | A | B | E | F | X | Y | Mounting Hole | ||||
| Type | Mounting Hole Change | Number of Circuits | Q, R, S | Standard | Configurable 1mm Increment | M | |||||||||
| (20 Sq.) | T (Tapped) YN (Side Through) | 1 | 1 (1/8) M3 (M3) M4 (M4) 5 (M5) | - | - | 0 | 3 | 20 | 20 | 20 | 10 | 5 | 4 | M5 | |
| Pitch Standard BMGFC BMGFCA | Pitch Configurable BMGFCP BMGFCAP | 2 | 15 | 15~50 | 1 | 6 | |||||||||
| 3 | 2 | 9 | |||||||||||||
| 4 | 3 | 12 | |||||||||||||
| 5 | 4 | 15 | |||||||||||||
| 6 | 5 | 18 | |||||||||||||
| 7 | 20~50 | 6 | 21 | ||||||||||||
| 8 | 7 | 24 | |||||||||||||
| (25 Sq.) | NA (Through) T (Tapped) ZT (Counterbore Tapped) YZ (Side Counterbore) YN (Side Through) | 1 | 1 (1/8) 2 (1/4) 5 (M5) 1N (NPT1/8) 2N (NPT1/4) | - | - | 0 | 3 | 25 | 25 | 20 | 12.5 | 7.5 | 7 | M5 | |
| Pitch Standard BMGF BMGFA | Pitch Configurable BMGFP BMGFAP | 2 | 30 | 20~50 | 1 | 6 | |||||||||
| 3 | 2 | 9 | |||||||||||||
| 4 | 3 | 12 | |||||||||||||
| 5 | 4 | 15 | |||||||||||||
| 6 | 25~50 | 5 | 18 | ||||||||||||
| 7 | 6 | 21 | |||||||||||||
| 8 | 7 | 24 | |||||||||||||
| (35 Sq.) | 1 | 1 (1/8) 2 (1/4) 5 (M5) 1N (NPT1/8) 2N (NPT1/4) | - | - | 0 | 3 | 35 | 35 | 20 | 17.5 | 7.5 | 7 | M5 | ||
| Pitch Standard BMGFK | Pitch Configurable BMGFKP | 2 | 30 | 20~50 | 1 | 6 | |||||||||
| 3 | 2 | 9 | |||||||||||||
| 4 | 3 | 12 | |||||||||||||
| 5 | 4 | 15 | |||||||||||||
| 6 | 25~50 | 5 | 18 | ||||||||||||
| 7 | 6 | 21 | |||||||||||||
| 8 | 7 | 24 | |||||||||||||
| (50 Sq.) | 1 | 2 (1/4) 3 (3/8) 4 (1/2) | - | - | 0 | 3 | 50 | 50 | 25 | 25 | 8.5 | 8.5 | M8 | ||
| Pitch Standard BMGFL BMGFLA | 2 | 40 | - | 1 | 6 | ||||||||||
| 3 | 2 | 9 | |||||||||||||
| 4 | 3 | 12 | |||||||||||||
| 5 | 4 | 15 | |||||||||||||
| 6 | 5 | 18 | |||||||||||||
For Q, R and S, specify 1, 2, 3, 4, 5, M3, M4, 1N or 2N indicated before ( ).
Single Circuit is not available for Pitch Configurable Type.
Specify the pitch taking into consideration the necessary dimensions for fitting the couplings.
Each 6 and 8 Circuit Type has an additional mounting hole at the midpoint of the overall length. 7 Circuit Type has an additional mounting hole at each midpoint of the 2 - 3 port pitch, and 5 - 6 port pitch from the left to the right. (Except for 20 Sq. and 25 Sq.)
For Block Square 25□Type, when 1/4 is selected for both tapered threads at right angles, the tapered male threads may interfere with each other. Select Block Square□35 Type instead.
Select NA, T or ZT for the mounting hole shape of 7 and 8 Circuit Types .
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Surface Treatment | Block Size (mm) | Number of Circuits (Circuits) | Thread Size / Type | Mounting Hole Change | Pitch P (mm) | Pitch Standard / Configurable | Drawing Q Part Thread Dia. NPT Selection [Q] | Drawing R Part Thread Dia. NPT Selection [R] | Drawing S Part Thread Dia. NPT Selection [S] | Select a value for M Thread (Coarse) Dia. on Q (in Drawing). [QM] 3(M3) 4(M4) | Select a value for M Thread (Coarse) Dia. on R (in Drawing). [RM] 3(M3) 4(M4) | Select a value for M Thread (Coarse) Dia. on S (in Drawing). [SM] 3(M3) 4(M4) | Select a value for PT/PF, M Thread (Coarse) Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) | Select a value for PT/PF, M Thread (Coarse) Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) | Select a value for PT/PF, M Thread (Coarse) Dia. on S (in Drawing). [S] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 1 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | - | - | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 1 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | - | - | - | - | - | - | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 1 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | 1 ～ 5 | - | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 1 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 1 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | 1/4 [R2N] / 1/8 [R1N] | 1/4 [S2N] / 1/8 [S1N] | - | - | - | 1 ～ 5 | - | - | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 1 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | 1/4 [R2N] / 1/8 [R1N] | - | - | - | - | 1 ～ 5 | - | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 1 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | - | 1/4 [S2N] / 1/8 [S1N] | - | - | - | 1 ～ 5 | 1 ～ 5 | - | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 1 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 2 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | - | - | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 2 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | - | - | - | - | - | - | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 2 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | 1 ～ 5 | - | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 2 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 2 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | 1/4 [R2N] / 1/8 [R1N] | 1/4 [S2N] / 1/8 [S1N] | - | - | - | 1 ～ 5 | - | - | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 2 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | 1/4 [R2N] / 1/8 [R1N] | - | - | - | - | 1 ～ 5 | - | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 2 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | - | 1/4 [S2N] / 1/8 [S1N] | - | - | - | 1 ～ 5 | 1 ～ 5 | - | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 2 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 3 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | - | - | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 3 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | - | - | - | - | - | - | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 3 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | 1 ～ 5 | - | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 3 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 3 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | 1/4 [R2N] / 1/8 [R1N] | 1/4 [S2N] / 1/8 [S1N] | - | - | - | 1 ～ 5 | - | - | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 3 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | 1/4 [R2N] / 1/8 [R1N] | - | - | - | - | 1 ～ 5 | - | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 3 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | - | 1/4 [S2N] / 1/8 [S1N] | - | - | - | 1 ～ 5 | 1 ～ 5 | - | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 3 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 4 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | - | - | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 4 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | - | - | - | - | - | - | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 4 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | 1 ～ 5 | - | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 4 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 4 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | 1/4 [R2N] / 1/8 [R1N] | 1/4 [S2N] / 1/8 [S1N] | - | - | - | 1 ～ 5 | - | - | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 4 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | 1/4 [R2N] / 1/8 [R1N] | - | - | - | - | 1 ～ 5 | - | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 4 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | - | 1/4 [S2N] / 1/8 [S1N] | - | - | - | 1 ～ 5 | 1 ～ 5 | - | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 4 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 5 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | - | - | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 5 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | - | - | - | - | - | - | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 5 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | 1 ～ 5 | - | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 5 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 5 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | 1/4 [R2N] / 1/8 [R1N] | 1/4 [S2N] / 1/8 [S1N] | - | - | - | 1 ～ 5 | - | - | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 5 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | 1/4 [R2N] / 1/8 [R1N] | - | - | - | - | 1 ～ 5 | - | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 5 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | - | 1/4 [S2N] / 1/8 [S1N] | - | - | - | 1 ～ 5 | 1 ～ 5 | - | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 5 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 6 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | - | - | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 6 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | - | - | - | - | - | - | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 6 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | 1 ～ 5 | - | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 6 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 6 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | 1/4 [R2N] / 1/8 [R1N] | 1/4 [S2N] / 1/8 [S1N] | - | - | - | 1 ～ 5 | - | - | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 6 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | 1/4 [R2N] / 1/8 [R1N] | - | - | - | - | 1 ～ 5 | - | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 6 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | - | 1/4 [S2N] / 1/8 [S1N] | - | - | - | 1 ～ 5 | 1 ～ 5 | - | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 6 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 7 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | - | - | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 7 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | - | - | - | - | - | - | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 7 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | 1 ～ 5 | - | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 7 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 7 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | 1/4 [R2N] / 1/8 [R1N] | 1/4 [S2N] / 1/8 [S1N] | - | - | - | 1 ～ 5 | - | - | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 7 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | 1/4 [R2N] / 1/8 [R1N] | - | - | - | - | 1 ～ 5 | - | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 7 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | - | 1/4 [S2N] / 1/8 [S1N] | - | - | - | 1 ～ 5 | 1 ～ 5 | - | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 7 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 8 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | - | - | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 8 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | 1/4 [R2N] / 1/8 [R1N] | - | - | - | - | - | - | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 8 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | 1/4 [S2N] / 1/8 [S1N] | - | - | - | - | 1 ～ 5 | - | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 25 x 25 | 8 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Counterbore) | 30 | Fixed Type | 1/4 [Q2N] / 1/8 [Q1N] | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 |
Loading...
Basic information
| Shape | T-Shaped Hole | Material | EN AW-5052 Equiv. | Application | Pneumatic |
|---|
Configure
Basic Attributes
-
Block Size(mm)
- 20 x 20
- 25 x 25
- 35 x 35
- 50 x 50
-
Number of Circuits(Circuits)
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
-
Thread Size / Type
-
Mounting Hole Change
- NA (Through)
- Not Specified (Counterbore)
- Not Specified (Through)
- T (Tapped)
- YN (Side Through)
- YZ (Side Counterbore)
- ZT (Counterbore Tapped)
-
Pitch P(mm)
-
Pitch Standard / Configurable
- Configurable Type
- Fixed Type
-
Drawing Q Part Thread Dia. NPT Selection [Q]
- 1/4 [Q2N]
- 1/8 [Q1N]
-
Drawing R Part Thread Dia. NPT Selection [R]
- 1/4 [R2N]
- 1/8 [R1N]
-
Drawing S Part Thread Dia. NPT Selection [S]
- 1/4 [S2N]
- 1/8 [S1N]
-
Select a value for M Thread (Coarse) Dia. on Q (in Drawing). [QM] 3(M3) 4(M4)
-
Select a value for M Thread (Coarse) Dia. on R (in Drawing). [RM] 3(M3) 4(M4)
-
Select a value for M Thread (Coarse) Dia. on S (in Drawing). [SM] 3(M3) 4(M4)
-
Select a value for PT/PF, M Thread (Coarse) Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)
-
Select a value for PT/PF, M Thread (Coarse) Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)
-
Select a value for PT/PF, M Thread (Coarse) Dia. on S (in Drawing). [S] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5)
-
Type
- BMGF
- BMGFA
- BMGFAP
- BMGFC
- BMGFCA
- BMGFCAP
- BMGFCP
- BMGFK
- BMGFKP
- BMGFL
- BMGFLA
- BMGFP
- G-BMGF
- G-BMGFA
- G-BMGFAP
- G-BMGFC
- G-BMGFCA
- G-BMGFCAP
- G-BMGFCP
- G-BMGFK
- G-BMGFKP
- G-BMGFL
- G-BMGFLA
- G-BMGFP
-
Surface Treatment
- Not Provided
- Clear Anodized Aluminum
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 7 Days or Less
- 10 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
Flow Rate Control Valves / 90 Deg. Elbow / Miniature
MISUMI Standard Price : 7.67 € Shipping Days: Same day
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.