Manifold Pneumatic / Outlets 1 Side / 2 Inlets (Part Numbers - CAD Download)
- Order quantities extended (D-JIT)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
| Type | Material | Surface Treatment | Max. Operating Pressure | ||||||
| Pitch (P) Standard | Pitch (P) Configurable | ||||||||
| 20 Sq. | 30 Sq. | 40 Sq. | 60 Sq. | 20 Sq. | 30 Sq. | 40 Sq. | |||
| BMSFC | BMSF | BMSFL | BMSFB | BMSFCP | BMSFP | BMSFLP | Aluminum Alloy 5000 series | - | 1MPa≈10kgf/cm2 or less |
| BMSFCA | BMSFA | BMSFLA | - | BMSFCAP | BMSFAP | BMSFLAP | Clear Anodize | ||
Specifications
| Part Number | - | Q | - | G | - | K | - | P | ||||||
| Type | Mounting Hole Change | Number of Circuits | ||||||||||||
| BMSF BMSFLP G-BMSFLP | T ZT ZT | 5 5 5 | - - - | Q2 Q2 Q2 | - - - | G1 G3 G3 | - - - | K2 K3 K3 | - - | P50 P50 | (G Thread) | |||
| Part Number | Rc (PT), NPT, M (Coarse) Selection | Pitch P | Number of Pitches N | Total Number of Q, G and K Threads | A | B | E | F | X | Y | Mounting Hole | |||||
| Type | Mounting Hole Change | Number of Circuits | Q | G, K | Standard | Configurable 1mm Increment | M | |||||||||
| (20 Sq.) | T (Tapped) | 1 | 1 (1/8) M3 (M3) M4 (M4) 5 (M5) | 1 (1/8) M3 (M3) M4 (M4) 5 (M5) | - | - | 0 | 3 | 20 | 20 | 20 | 13 | 5 | 4 | M5 | |
Pitch Standard BMSFC BMSFCA | Pitch Configurable BMSFCP BMSFCAP | 2 | 15 | 15~50 | 1 | 4 | ||||||||||
| 3 | 2 | 5 | ||||||||||||||
| 4 | 3 | 6 | ||||||||||||||
| 5 | 4 | 7 | ||||||||||||||
| 6 | 5 | 8 | ||||||||||||||
| 7 | 1 (1/8) | 6 | 9 | |||||||||||||
| 8 | 15~35 | 7 | 10 | |||||||||||||
| (30 Sq.) | ZB (Back Surface Counterbore) NA (Through) T (Tapped) ZT (Counterbore Tapped) | 1 | 1 (1/8) 2 (1/4) 5 (M5) 1N (NPT1/8) 2N (NPT1/4) | 1 (1/8) 2 (1/4) 5 (M5)* 1N (NPT1/8) 2N (NPT1/4) | - | - | 0 | 3 | 30 | 30 | 20 | 20 | 7.5 | 7 | M5 | |
| Pitch Standard BMSF BMSFA | Pitch Configurable BMSFP BMSFAP | 2 | 30 | 20~50 | 1 | 4 | ||||||||||
| 3 | 2 | 5 | ||||||||||||||
| 4 | 3 | 6 | ||||||||||||||
| 5 | 4 | 7 | ||||||||||||||
| 6 | 5 | 8 | ||||||||||||||
| 7* | 6 | 9 | ||||||||||||||
| 8* | 20~35 | 7 | 10 | |||||||||||||
| (40 Sq.) | 1 | 1 (1/8) 2 (1/4) 3 (3/8) 4 (1/2) | 2 (1/4) 3 (3/8) 4 (1/2) | - | - | 0 | 3 | 40 | 40 | 25 | 25 | 7 | 7 | M6 | ||
| Pitch Standard BMSFL BMSFLA | Pitch Configurable BMSFLP BMSFLAP | 2 | 40 | 35~60 | 1 | 4 | ||||||||||
| 3 | 2 | 5 | ||||||||||||||
| 4 | 3 | 6 | ||||||||||||||
| 5 | 4 | 7 | ||||||||||||||
| 6 | 5 | 8 | ||||||||||||||
| 7 | 35~50 | 6 | 9 | |||||||||||||
| 8 | 35~40 | 7 | 10 | |||||||||||||
| (60 Sq.) | 1 | 6 (3/4) 8 (1) | 8 (1) | - | - | 0 | 3 | 60 | 60 | 40 | 35 | 25 | 9 | M8 | ||
| Pitch Standard BMSFB | 2 | 60 | 1 | 4 | ||||||||||||
| 3 | 2 | 5 | ||||||||||||||
| 4 | 3 | 6 | ||||||||||||||
For Q, G and K, specify 1, 2, 3, 4, 5, 6, 8, M3, M4, 1N, or 2N indicated before ( ). Single Circuit is not available for Pitch Configurable Type.
Specify the pitch taking into consideration the necessary dimensions for fitting the couplings. Each 6 and 8 Circuit Type has an additional mounting hole at the midpoint of the overall length. 7 Circuit Type has an additional mounting hole at each midpoint of the 2 - 3 port pitch, and 5 - 6 port pitch from the left to the right. (Except for 20 Sq.)
When * marked 7 or 8 Circuit is selected from 30 Sq., 5(M5) is not available for G or K. For G and K of 20 Sq. Pitch Configurable Type, M3, M4 or 5 (M5) are not selectable.
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Surface Treatment | Block Size (mm) | Number of Circuits (Circuits) | Thread Size / Type | Mounting Hole Change | Pitch P (mm) | Pitch Standard / Configurable | Drawing G Part Thread Dia. NPT Selection [G] | Drawing K Part Thread Dia. NPT Selection [K] | Drawing Q Part Thread Dia. NPT Selection [Q] | Select a value for M Thread (Coarse) Dia. on G (in Drawing). [GM] 3(M3) 4(M4) | Select a value for M Thread (Coarse) Dia. on K (in Drawing). [KM] [KM] 3(M3) 4(M4) | Select a value for M Thread (Coarse) Dia. on Q (in Drawing). [QM] 3(M3) 4(M4) | Select a value for PT/PF, M Thread (Coarse) Dia. on G (in Drawing). [G] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 8(1) | Select a value for PT/PF, M Thread (Coarse) Dia. on K (in Drawing). [K] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 8(1) | Select a value for PT/PF, M Thread (Coarse) Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4) 8(1) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 30 x 30 | 8 | Standard Thread {PT, m (Coarse) Thread} | ZT (Counterbore Tapped) | 30 | Fixed Type | 1/4 [G2N] / 1/8 [G1N] | 1/4 [K2N] / 1/8 [K1N] | - | - | - | - | - | - | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 30 x 30 | 8 | Standard Thread {PT, m (Coarse) Thread} | ZT (Counterbore Tapped) | 30 | Fixed Type | 1/4 [G2N] / 1/8 [G1N] | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 30 x 30 | 8 | Standard Thread {PT, m (Coarse) Thread} | ZT (Counterbore Tapped) | 30 | Fixed Type | - | 1/4 [K2N] / 1/8 [K1N] | - | - | - | - | 1 ～ 5 | - | 1 ～ 5 | ||
- | 1 | 10 Days | 10 | Clear Anodized Aluminum | 30 x 30 | 8 | Standard Thread {PT, m (Coarse) Thread} | ZT (Counterbore Tapped) | 30 | Fixed Type | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 7 Days | 10 | Not Provided | 60 x 60 | 1 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Front Surface Counterbore) | 60 | Fixed Type | - | - | - | - | - | - | 8 | 8 | 6 ～ 8 | ||
- | 1 | 7 Days | 10 | Not Provided | 60 x 60 | 2 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Front Surface Counterbore) | 60 | Fixed Type | - | - | - | - | - | - | 8 | 8 | 6 ～ 8 | ||
- | 1 | 7 Days | 10 | Not Provided | 60 x 60 | 3 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Front Surface Counterbore) | 60 | Fixed Type | - | - | - | - | - | - | 8 | 8 | 6 ～ 8 | ||
- | 1 | 7 Days | 10 | Not Provided | 60 x 60 | 4 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Front Surface Counterbore) | 60 | Fixed Type | - | - | - | - | - | - | 8 | 8 | 6 ～ 8 | ||
- | 1 | 7 Days | 10 | Not Provided | 60 x 60 | 1 | Standard Thread {PT, m (Coarse) Thread} | NA (Through) | 60 | Fixed Type | - | - | - | - | - | - | 8 | 8 | 6 ～ 8 | ||
- | 1 | 7 Days | 10 | Not Provided | 60 x 60 | 2 | Standard Thread {PT, m (Coarse) Thread} | NA (Through) | 60 | Fixed Type | - | - | - | - | - | - | 8 | 8 | 6 ～ 8 | ||
- | 1 | 7 Days | 10 | Not Provided | 60 x 60 | 3 | Standard Thread {PT, m (Coarse) Thread} | NA (Through) | 60 | Fixed Type | - | - | - | - | - | - | 8 | 8 | 6 ～ 8 | ||
- | 1 | 7 Days | 10 | Not Provided | 60 x 60 | 4 | Standard Thread {PT, m (Coarse) Thread} | NA (Through) | 60 | Fixed Type | - | - | - | - | - | - | 8 | 8 | 6 ～ 8 | ||
- | 1 | 7 Days | 10 | Not Provided | 60 x 60 | 1 | Standard Thread {PT, m (Coarse) Thread} | T (Tapped) | 60 | Fixed Type | - | - | - | - | - | - | 8 | 8 | 6 ～ 8 | ||
- | 1 | 7 Days | 10 | Not Provided | 60 x 60 | 2 | Standard Thread {PT, m (Coarse) Thread} | T (Tapped) | 60 | Fixed Type | - | - | - | - | - | - | 8 | 8 | 6 ～ 8 | ||
- | 1 | 7 Days | 10 | Not Provided | 60 x 60 | 3 | Standard Thread {PT, m (Coarse) Thread} | T (Tapped) | 60 | Fixed Type | - | - | - | - | - | - | 8 | 8 | 6 ～ 8 | ||
- | 1 | 7 Days | 10 | Not Provided | 60 x 60 | 4 | Standard Thread {PT, m (Coarse) Thread} | T (Tapped) | 60 | Fixed Type | - | - | - | - | - | - | 8 | 8 | 6 ～ 8 | ||
- | 1 | 7 Days | 10 | Not Provided | 60 x 60 | 1 | Standard Thread {PT, m (Coarse) Thread} | ZB (Back Surface Counterbore) | 60 | Fixed Type | - | - | - | - | - | - | 8 | 8 | 6 ～ 8 | ||
- | 1 | 7 Days | 10 | Not Provided | 60 x 60 | 2 | Standard Thread {PT, m (Coarse) Thread} | ZB (Back Surface Counterbore) | 60 | Fixed Type | - | - | - | - | - | - | 8 | 8 | 6 ～ 8 | ||
- | 1 | 7 Days | 10 | Not Provided | 60 x 60 | 3 | Standard Thread {PT, m (Coarse) Thread} | ZB (Back Surface Counterbore) | 60 | Fixed Type | - | - | - | - | - | - | 8 | 8 | 6 ～ 8 | ||
- | 1 | 7 Days | 10 | Not Provided | 60 x 60 | 4 | Standard Thread {PT, m (Coarse) Thread} | ZB (Back Surface Counterbore) | 60 | Fixed Type | - | - | - | - | - | - | 8 | 8 | 6 ～ 8 | ||
- | 1 | 7 Days | 10 | Not Provided | 60 x 60 | 1 | Standard Thread {PT, m (Coarse) Thread} | ZT (Counterbore Tapped) | 60 | Fixed Type | - | - | - | - | - | - | 8 | 8 | 6 ～ 8 | ||
- | 1 | 7 Days | 10 | Not Provided | 60 x 60 | 2 | Standard Thread {PT, m (Coarse) Thread} | ZT (Counterbore Tapped) | 60 | Fixed Type | - | - | - | - | - | - | 8 | 8 | 6 ～ 8 | ||
- | 1 | 7 Days | 10 | Not Provided | 60 x 60 | 3 | Standard Thread {PT, m (Coarse) Thread} | ZT (Counterbore Tapped) | 60 | Fixed Type | - | - | - | - | - | - | 8 | 8 | 6 ～ 8 | ||
- | 1 | 7 Days | 10 | Not Provided | 60 x 60 | 4 | Standard Thread {PT, m (Coarse) Thread} | ZT (Counterbore Tapped) | 60 | Fixed Type | - | - | - | - | - | - | 8 | 8 | 6 ～ 8 | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 1 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 1 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | - | 3 ～ 4 | - | 1 ～ 5 | - | 1 ～ 5 | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 1 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | 3 ～ 4 | - | - | - | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 1 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | 3 ～ 4 | 3 ～ 4 | - | - | - | 1 ～ 5 | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 1 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | - | - | 3 ～ 4 | 1 ～ 5 | 1 ～ 5 | - | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 1 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | - | 3 ～ 4 | 3 ～ 4 | 1 ～ 5 | - | - | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 1 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | 3 ～ 4 | - | 3 ～ 4 | - | 1 ～ 5 | - | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 1 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | 3 ～ 4 | 3 ～ 4 | 3 ～ 4 | - | - | - | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 2 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 2 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | - | 3 ～ 4 | - | 1 ～ 5 | - | 1 ～ 5 | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 2 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | 3 ～ 4 | - | - | - | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 2 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | 3 ～ 4 | 3 ～ 4 | - | - | - | 1 ～ 5 | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 2 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | - | - | 3 ～ 4 | 1 ～ 5 | 1 ～ 5 | - | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 2 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | - | 3 ～ 4 | 3 ～ 4 | 1 ～ 5 | - | - | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 2 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | 3 ～ 4 | - | 3 ～ 4 | - | 1 ～ 5 | - | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 2 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | 3 ～ 4 | 3 ～ 4 | 3 ～ 4 | - | - | - | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 3 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 3 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | - | 3 ～ 4 | - | 1 ～ 5 | - | 1 ～ 5 | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 3 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | 3 ～ 4 | - | - | - | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 3 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | 3 ～ 4 | 3 ～ 4 | - | - | - | 1 ～ 5 | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 3 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | - | - | 3 ～ 4 | 1 ～ 5 | 1 ～ 5 | - | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 3 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | - | 3 ～ 4 | 3 ～ 4 | 1 ～ 5 | - | - | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 3 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | 3 ～ 4 | - | 3 ～ 4 | - | 1 ～ 5 | - | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 3 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | 3 ～ 4 | 3 ～ 4 | 3 ～ 4 | - | - | - | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 4 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 4 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | - | 3 ～ 4 | - | 1 ～ 5 | - | 1 ～ 5 | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 4 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | 3 ～ 4 | - | - | - | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 4 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | 3 ～ 4 | 3 ～ 4 | - | - | - | 1 ～ 5 | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 4 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | - | - | 3 ～ 4 | 1 ～ 5 | 1 ～ 5 | - | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 4 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | - | 3 ～ 4 | 3 ～ 4 | 1 ～ 5 | - | - | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 4 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | 3 ～ 4 | - | 3 ～ 4 | - | 1 ～ 5 | - | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 4 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | 3 ～ 4 | 3 ～ 4 | 3 ～ 4 | - | - | - | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 5 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | - | - | - | 1 ～ 5 | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 5 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | - | 3 ～ 4 | - | 1 ～ 5 | - | 1 ～ 5 | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 5 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | 3 ～ 4 | - | - | - | 1 ～ 5 | 1 ～ 5 | ||
- | 1 | 7 Days | 10 | Not Provided | 20 x 20 | 5 | Standard Thread {PT, m (Coarse) Thread} | Not Specified (Through) | 15 | Fixed Type | - | - | - | 3 ～ 4 | 3 ～ 4 | - | - | - | 1 ～ 5 |
Loading...
Basic information
| Shape | Blind Lateral Hole, Upper Hole | Material | EN AW-5052 Equiv. | Application | Pneumatic |
|---|
Configure
Basic Attributes
-
Surface Treatment
- Not Provided
- Clear Anodized Aluminum
-
Block Size(mm)
- 20 x 20
- 30 x 30
- 40 x 40
- 60 x 60
-
Number of Circuits(Circuits)
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
-
Thread Size / Type
-
Mounting Hole Change
- NA (Through)
- Not Specified (Front Surface Counterbore)
- Not Specified (Through)
- T (Tapped)
- ZB (Back Surface Counterbore)
- ZT (Counterbore Tapped)
-
Pitch P(mm)
-
Pitch Standard / Configurable
- Configurable Type
- Fixed Type
-
Drawing G Part Thread Dia. NPT Selection [G]
- 1/4 [G2N]
- 1/8 [G1N]
-
Drawing K Part Thread Dia. NPT Selection [K]
- 1/4 [K2N]
- 1/8 [K1N]
-
Drawing Q Part Thread Dia. NPT Selection [Q]
- 1/4 [Q2N]
- 1/8 [Q1N]
-
Select a value for M Thread (Coarse) Dia. on G (in Drawing). [GM] 3(M3) 4(M4)
-
Select a value for M Thread (Coarse) Dia. on K (in Drawing). [KM] [KM] 3(M3) 4(M4)
-
Select a value for M Thread (Coarse) Dia. on Q (in Drawing). [QM] 3(M3) 4(M4)
-
Select a value for PT/PF, M Thread (Coarse) Dia. on G (in Drawing). [G] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 8(1)
-
Select a value for PT/PF, M Thread (Coarse) Dia. on K (in Drawing). [K] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 8(1)
-
Select a value for PT/PF, M Thread (Coarse) Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4) 8(1)
-
Type
- BMSF
- BMSFA
- BMSFAP
- BMSFB
- BMSFC
- BMSFCA
- BMSFCAP
- BMSFCP
- BMSFL
- BMSFLA
- BMSFLAP
- BMSFLP
- BMSFP
- G-BMSF
- G-BMSFA
- G-BMSFAP
- G-BMSFB
- G-BMSFC
- G-BMSFCA
- G-BMSFCAP
- G-BMSFCP
- G-BMSFL
- G-BMSFLA
- G-BMSFLAP
- G-BMSFLP
- G-BMSFP
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 7 Days or Less
- 9 Days or Less
- 10 Days or Less
- 12 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
Flow Rate Control Valves / 90 Deg. Elbow / Miniature
MISUMI Standard Price : 7.67 € Shipping Days: Same day
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.