MC Nylon Plates (Part Numbers - CAD Download)
Click on this image to zoom in.
Click on this image to zoom in.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- Catalog
- Technical Information
| Type | Grade / Material | Color | Operating Ambient Temperature |
| MCA | Standard / MC901 | Blue | -40~120°C |
| MCAW | Standard / MC900NC | Ivory | |
| MCAS | Sliding / MC703HL | Purple | |
| MCAY | High Strength / MC602ST | Dark Brown | Ambient Temp. ~ 150°C |
| MCAPS | Weather Resistance / MC801 | Dark Gray | Ambient Temp. ~ 120°C |
| MCCA | Conductivity CDR2 / MC501CDR2 | Black | Ambient Temp. ~ 120°C |
| MCDA | Antistatic CDR6 / MC501CDR6 | Black | |
| MCEA | Antistatic / Heat Resistant CDR9 / MC501CDR9 | Black | Ambient Temp. ~ 150°C |
Specifications
■ Pre-drilled Type
| Part Number | - | A | - | B | - | T | - | F | - | G | - | Screw Nominal Dia. | - | L |
| MCDA4H MCDA4H | - - | 200 500 | - - | 155 300 | - - | 5 10 | - - | F160 F300 | - - | G120 G200 | - - | N4 M5 | - | L7.5 |
■ Pre-drilled Type
Dimension F Specification Range: For 2H and 4H, d(d1)+2.5≤F≤A-d(d1)-5; for 2HL, d(d1)/2+2.5≤F≤A-d(d1)/2-2.5; for 6H, d(d1)+2.5≤F≤(A-d(d1)-5)/2.
Dimension G Specification Range: For 2H, d(d1)/2+2.5≤G≤B-d(d1)/2-2.5; for 2HL, 4H and 6H, d(d1)+2.5≤G≤B-d(d1)-5.
For Pre-drilled Type, select N (through hole) or Z (counterbore hole); for Threaded Insert Type, select M (threaded insert) or L (insertion length).
| Part Number | A | B | T Dimension Range by Material | T | F | G | |||
| Type | T Dimension Tolerance | Number of Holes | |||||||
| MCA MCAW MCAS MCAY MCAPS MCCA MCDA MCEA | (Standard, Blue) (Standard, Ivory) (Sliding) (High Strength) (Weather Resistance) (Conductivity CDR2) (Antistatic CDR6) (Antistatic / Heat Resistant CDR9) | Circular Sawing | 1mm Increment | Selectable | 0.5mm Increment | ||||
| Not available | 2H (Horizontal) 2HL (Vertical) 4H 6H | 20~500 | 20~400 | MCEA | 10, 12, 15, 20, 25 | 6~491.5 (2H, 4H) 4.5~395.5 (2HL) 6~245.5 (6H) | 4.5~395.5 (2H) 6~391.5 (2HL, 4H, 6H) | ||
| Others | 5, 7, 10, 12, 15, 20, 25, 30 | ||||||||
| Upper-lower Surface Milling (2F) | 1mm Increment | 0.1mm Increment | 0.5mm Increment | ||||||
| 2FQ 0~+0.2 2FN ±0.1 2FM -0.2~0 | 2H (Horizontal) 2HL (Vertical) 4H 6H | 20~400 | 20~250 | MCEA | 10~24 | 6~391.5 (2H, 4H) 4.5~395.5 (2HL) 6~195.5 (6H) | 4.5~245.5 (2H) 6~241.5 (2HL, 4H, 6H) | ||
| Others | 5~29 | ||||||||
Dimension G Specification Range: For 2H, d(d1)/2+2.5≤G≤B-d(d1)/2-2.5; for 2HL, 4H and 6H, d(d1)+2.5≤G≤B-d(d1)-5.
For Pre-drilled Type, select N (through hole) or Z (counterbore hole); for Threaded Insert Type, select M (threaded insert) or L (insertion length).
| T Dimension | Pre-drilled Hole Nominal Dia. | ||||||||||||
| Through Hole | Counterbore Hole | Threaded Insert | |||||||||||
| N | Z | M | L | ||||||||||
| 5~6 | 3 4 5 6 8 10 | - | 3 | 4 | (Threaded Insert Length) Select from Table 1 | ||||||||
| 7~9 | 3 | 4 | 3 | 4 | 5 | 6 | |||||||
| 10~14 | 4 | 5 | 6 | 3 | 4 | 5 | 6 | 8 | 10 | ||||
| 15~30 | 4 | 5 | 6 | 8 | 3 | 4 | 5 | 6 | 8 | 10 | |||
Alterations
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Grade | Color | Hole Processing | Finishing Method | T Dimension Tolerance | Material Name | A (mm) | B (mm) | F | G | M | N | T (mm) | Z | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 9 Days | 10 | Standard | Blue | 6H | Upper-lower Surface Milled | M (0/-0.2) | Nylon (blue), MC901 | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | 3 ～ 10 | - | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | Standard | Blue | 6H | Upper-lower Surface Milled | M (0/-0.2) | Nylon (blue), MC901 | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | - | 3 ～ 10 | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | Standard | Blue | 6H | Upper-lower Surface Milled | M (0/-0.2) | Nylon (blue), MC901 | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | - | - | 5 ～ 29 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | Standard | Blue | 6H | Upper-lower Surface Milled | N (±0.1) | Nylon (blue), MC901 | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | 3 ～ 10 | - | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | Standard | Blue | 6H | Upper-lower Surface Milled | N (±0.1) | Nylon (blue), MC901 | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | - | 3 ～ 10 | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | Standard | Blue | 6H | Upper-lower Surface Milled | N (±0.1) | Nylon (blue), MC901 | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | - | - | 5 ～ 29 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | Standard | Blue | 6H | Upper-lower Surface Milled | Q (+0.2/0) | Nylon (blue), MC901 | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | 3 ～ 10 | - | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | Standard | Blue | 6H | Upper-lower Surface Milled | Q (+0.2/0) | Nylon (blue), MC901 | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | - | 3 ～ 10 | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | Standard | Blue | 6H | Upper-lower Surface Milled | Q (+0.2/0) | Nylon (blue), MC901 | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | - | - | 5 ～ 29 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | Standard | Blue | 6H | Circular Sawing | - | Nylon (blue), MC901 | 20 ～ 600 | 20 ～ 500 | 6 ～ 295.5 | 6 ～ 491.5 | 3 ～ 10 | - | 5 ～ 30 | - | ||
- | 1 | 9 Days | 10 | Standard | Blue | 6H | Circular Sawing | - | Nylon (blue), MC901 | 20 ～ 600 | 20 ～ 500 | 6 ～ 295.5 | 6 ～ 491.5 | - | 3 ～ 10 | 5 ～ 30 | - | ||
- | 1 | 9 Days | 10 | Standard | Blue | 6H | Circular Sawing | - | Nylon (blue), MC901 | 20 ～ 600 | 20 ～ 500 | 6 ～ 295.5 | 6 ～ 491.5 | - | - | 5 ～ 30 | 3 ～ 8 | ||
- | 1 | 9 Days | 10 | Weather Resistant | Black Gray | 6H | Upper-lower Surface Milled | M (0/-0.2) | Weather Resistance, (Nylon (grey-black), MC801) | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | 3 ～ 10 | - | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | Weather Resistant | Black Gray | 6H | Upper-lower Surface Milled | M (0/-0.2) | Weather Resistance, (Nylon (grey-black), MC801) | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | - | 3 ～ 10 | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | Weather Resistant | Black Gray | 6H | Upper-lower Surface Milled | M (0/-0.2) | Weather Resistance, (Nylon (grey-black), MC801) | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | - | - | 5 ～ 29 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | Weather Resistant | Black Gray | 6H | Upper-lower Surface Milled | N (±0.1) | Weather Resistance, (Nylon (grey-black), MC801) | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | 3 ～ 10 | - | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | Weather Resistant | Black Gray | 6H | Upper-lower Surface Milled | N (±0.1) | Weather Resistance, (Nylon (grey-black), MC801) | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | - | 3 ～ 10 | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | Weather Resistant | Black Gray | 6H | Upper-lower Surface Milled | N (±0.1) | Weather Resistance, (Nylon (grey-black), MC801) | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | - | - | 5 ～ 29 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | Weather Resistant | Black Gray | 6H | Upper-lower Surface Milled | Q (+0.2/0) | Weather Resistance, (Nylon (grey-black), MC801) | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | 3 ～ 10 | - | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | Weather Resistant | Black Gray | 6H | Upper-lower Surface Milled | Q (+0.2/0) | Weather Resistance, (Nylon (grey-black), MC801) | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | - | 3 ～ 10 | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | Weather Resistant | Black Gray | 6H | Upper-lower Surface Milled | Q (+0.2/0) | Weather Resistance, (Nylon (grey-black), MC801) | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | - | - | 5 ～ 29 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | Weather Resistant | Black Gray | 6H | Circular Sawing | - | Weather Resistance, (Nylon (grey-black), MC801) | 20 ～ 600 | 20 ～ 500 | 6 ～ 295.5 | 6 ～ 491.5 | 3 ～ 10 | - | 5 ～ 30 | - | ||
- | 1 | 9 Days | 10 | Weather Resistant | Black Gray | 6H | Circular Sawing | - | Weather Resistance, (Nylon (grey-black), MC801) | 20 ～ 600 | 20 ～ 500 | 6 ～ 295.5 | 6 ～ 491.5 | - | 3 ～ 10 | 5 ～ 30 | - | ||
- | 1 | 9 Days | 10 | Weather Resistant | Black Gray | 6H | Circular Sawing | - | Weather Resistance, (Nylon (grey-black), MC801) | 20 ～ 600 | 20 ～ 500 | 6 ～ 295.5 | 6 ～ 491.5 | - | - | 5 ～ 30 | 3 ～ 8 | ||
- | 1 | 9 Days | 10 | Sliding | Purple | 6H | Upper-lower Surface Milled | M (0/-0.2) | Nylon (purple), MC703HL | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | 3 ～ 10 | - | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | Sliding | Purple | 6H | Upper-lower Surface Milled | M (0/-0.2) | Nylon (purple), MC703HL | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | - | 3 ～ 10 | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | Sliding | Purple | 6H | Upper-lower Surface Milled | M (0/-0.2) | Nylon (purple), MC703HL | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | - | - | 5 ～ 29 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | Sliding | Purple | 6H | Upper-lower Surface Milled | N (±0.1) | Nylon (purple), MC703HL | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | 3 ～ 10 | - | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | Sliding | Purple | 6H | Upper-lower Surface Milled | N (±0.1) | Nylon (purple), MC703HL | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | - | 3 ～ 10 | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | Sliding | Purple | 6H | Upper-lower Surface Milled | N (±0.1) | Nylon (purple), MC703HL | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | - | - | 5 ～ 29 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | Sliding | Purple | 6H | Upper-lower Surface Milled | Q (+0.2/0) | Nylon (purple), MC703HL | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | 3 ～ 10 | - | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | Sliding | Purple | 6H | Upper-lower Surface Milled | Q (+0.2/0) | Nylon (purple), MC703HL | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | - | 3 ～ 10 | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | Sliding | Purple | 6H | Upper-lower Surface Milled | Q (+0.2/0) | Nylon (purple), MC703HL | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | - | - | 5 ～ 29 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | Sliding | Purple | 6H | Circular Sawing | - | Nylon (purple), MC703HL | 20 ～ 600 | 20 ～ 500 | 6 ～ 295.5 | 6 ～ 491.5 | 3 ～ 10 | - | 5 ～ 30 | - | ||
- | 1 | 9 Days | 10 | Sliding | Purple | 6H | Circular Sawing | - | Nylon (purple), MC703HL | 20 ～ 600 | 20 ～ 500 | 6 ～ 295.5 | 6 ～ 491.5 | - | 3 ～ 10 | 5 ～ 30 | - | ||
- | 1 | 9 Days | 10 | Sliding | Purple | 6H | Circular Sawing | - | Nylon (purple), MC703HL | 20 ～ 600 | 20 ～ 500 | 6 ～ 295.5 | 6 ～ 491.5 | - | - | 5 ～ 30 | 3 ～ 8 | ||
- | 1 | 9 Days | 10 | Standard | Ivory | 6H | Upper-lower Surface Milled | M (0/-0.2) | MC900NC | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | 3 ～ 10 | - | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | Standard | Ivory | 6H | Upper-lower Surface Milled | M (0/-0.2) | MC900NC | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | - | 3 ～ 10 | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | Standard | Ivory | 6H | Upper-lower Surface Milled | M (0/-0.2) | MC900NC | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | - | - | 5 ～ 29 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | Standard | Ivory | 6H | Upper-lower Surface Milled | N (±0.1) | MC900NC | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | 3 ～ 10 | - | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | Standard | Ivory | 6H | Upper-lower Surface Milled | N (±0.1) | MC900NC | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | - | 3 ～ 10 | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | Standard | Ivory | 6H | Upper-lower Surface Milled | N (±0.1) | MC900NC | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | - | - | 5 ～ 29 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | Standard | Ivory | 6H | Upper-lower Surface Milled | Q (+0.2/0) | MC900NC | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | 3 ～ 10 | - | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | Standard | Ivory | 6H | Upper-lower Surface Milled | Q (+0.2/0) | MC900NC | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | - | 3 ～ 10 | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | Standard | Ivory | 6H | Upper-lower Surface Milled | Q (+0.2/0) | MC900NC | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | - | - | 5 ～ 29 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | Standard | Ivory | 6H | Circular Sawing | - | MC900NC | 20 ～ 600 | 20 ～ 500 | 6 ～ 295.5 | 6 ～ 491.5 | 3 ～ 10 | - | 5 ～ 30 | - | ||
- | 1 | 9 Days | 10 | Standard | Ivory | 6H | Circular Sawing | - | MC900NC | 20 ～ 600 | 20 ～ 500 | 6 ～ 295.5 | 6 ～ 491.5 | - | 3 ～ 10 | 5 ～ 30 | - | ||
- | 1 | 9 Days | 10 | Standard | Ivory | 6H | Circular Sawing | - | MC900NC | 20 ～ 600 | 20 ～ 500 | 6 ～ 295.5 | 6 ～ 491.5 | - | - | 5 ～ 30 | 3 ～ 8 | ||
- | 1 | 9 Days | 10 | High Strength | Dark Brown | 6H | Upper-lower Surface Milled | M (0/-0.2) | MC602ST | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | 3 ～ 10 | - | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | High Strength | Dark Brown | 6H | Upper-lower Surface Milled | M (0/-0.2) | MC602ST | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | - | 3 ～ 10 | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | High Strength | Dark Brown | 6H | Upper-lower Surface Milled | M (0/-0.2) | MC602ST | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | - | - | 5 ～ 29 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | High Strength | Dark Brown | 6H | Upper-lower Surface Milled | N (±0.1) | MC602ST | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | 3 ～ 10 | - | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | High Strength | Dark Brown | 6H | Upper-lower Surface Milled | N (±0.1) | MC602ST | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | - | 3 ～ 10 | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | High Strength | Dark Brown | 6H | Upper-lower Surface Milled | N (±0.1) | MC602ST | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | - | - | 5 ～ 29 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | High Strength | Dark Brown | 6H | Upper-lower Surface Milled | Q (+0.2/0) | MC602ST | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | 3 ～ 10 | - | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | High Strength | Dark Brown | 6H | Upper-lower Surface Milled | Q (+0.2/0) | MC602ST | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | - | 3 ～ 10 | 5 ～ 29 | - | ||
- | 1 | 9 Days | 10 | High Strength | Dark Brown | 6H | Upper-lower Surface Milled | Q (+0.2/0) | MC602ST | 20 ～ 400 | 20 ～ 250 | 6 ～ 195.5 | 6 ～ 245.5 | - | - | 5 ～ 29 | 3 ～ 10 | ||
- | 1 | 9 Days | 10 | High Strength | Dark Brown | 6H | Circular Sawing | - | MC602ST | 20 ～ 600 | 20 ～ 500 | 6 ～ 295.5 | 6 ～ 491.5 | 3 ～ 10 | - | 5 ～ 30 | - | ||
- | 1 | 9 Days | 10 | High Strength | Dark Brown | 6H | Circular Sawing | - | MC602ST | 20 ～ 600 | 20 ～ 500 | 6 ～ 295.5 | 6 ～ 491.5 | - | 3 ～ 10 | 5 ～ 30 | - | ||
- | 1 | 9 Days | 10 | High Strength | Dark Brown | 6H | Circular Sawing | - | MC602ST | 20 ～ 600 | 20 ～ 500 | 6 ～ 295.5 | 6 ～ 491.5 | - | - | 5 ～ 30 | 3 ～ 8 |
Loading...
Basic information
| Material | MC Nylon |
|---|
Configure
Basic Attributes
-
Grade
- Standard
- Conductive
- Antistatic
- Sliding
- High Strength
- Weather Resistant
- Antistatic・Heat Resistant
-
Color
- Blue
- Ivory
- Black
- Purple
- Black Gray
- Dark Brown
-
Finishing Method
- Circular Sawing
- Upper-lower Surface Milled
-
T Dimension Tolerance
- M (0/-0.2)
- N (±0.1)
- Q (+0.2/0)
-
Material Name
-
A(mm)
-
B(mm)
-
F
-
G
-
M
-
N
-
T(mm)
-
Z
-
Type
- MCA2F□□H
- MCAPS2F□□H
- MCAPS2H
- MCAPS2HL
- MCAPS4H
- MCAPS6H
- MCAS2F□□H
- MCAS□H
- MCAW2F□□H
- MCAW□H
- MCAY2F□□H
- MCAY□H
- MCA□H
- MCCA2F□□H
- MCCA□H
- MCDA2F□□H
- MCDA□H
- MCEA2F□□H
- MCEA□H
-
Hole Processing
-
Filter by CAD data type
- 2D
- 3D
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
MISUMI Unit еxample related to this product
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.