• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Angle brackets / through hole, parallel pin bore / aluminium, cast iron / treatment selectable

Angle brackets / through hole, parallel pin bore / aluminium, cast iron / treatment selectable

Click on this image to zoom in.

Click on this image to zoom in.

View the FAQ (4)

MISUMI

MISUMI

The position of the drill holes for both the mounting surface and the support surface of the angle plate can be freely selected. Drill holes and dowel holes can be selected.

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Back to the Category Angle Brackets

Technical Drawing - Angle Brackets


Open the technical drawing in the new window

Available dimensions and tolerances can be found under the tab More information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Angle Brackets

Through HoleThrough Holes
and Dowel Holes		MaterialSurface Treatment
IKDFIKFEN-JL 1040 Equiv.Primer Paint (Gray)
BIKDFBIKFBlack Oxide
MIKDFMIKFElectroless Nickel Plating
AIKDFAIKFEN AC-51300 Equiv.-
EN-JL 1040 Equiv.: Surface treatment is not applied to the machined surfaces and holes.

Further specifications can be found under the tab More information.

Composition of a Product Code - Angle Brackets

Part Number-A-B-X-F-Y-G
IKDF100
BIKDF150
AIKF150		-
-
-		A50S
A70
A100
-
-
B60
B60

-

X35

-

F40		-
-
-		Y40
Y50
Y50		-
-
-		G40
G100
G70
 

Alterations - Angle Brackets

Angle Plates/Cast Iron/Aluminum-/Stainless Casting/Configurable Hole Position:Related Image

General Information - Angle Brackets

Angle console - angle console with through hole - angle bracket with reinforcement rib - angle bracket without hole - angle bracket wide - angle bracket with oblong hole - angle bracket welded

 

Angle Bracket Selection Details

- Material: aluminum, steel, cast steel, stainless steel
- Coatings: untreated, burnished, primed (grey), nickel-plated
- Design: cast, welded
- Perpendicularity: up to 0.02/100
- Bore holes: without bore hole, through-hole, internal thread, dowel pin bore, oblong hole
- Dowel pin bore: H7
- Length A: 40 to 150 mm
- Length H: 50 to 500 mm
- Width: 30 to 100 mm

Description/Basics

Basically, an angle bracket is used for precise and solid fastening or connecting of different components and as frame constructions in mechanical and plant engineering. In most cases, angle brackets are uneven.
Due to its high perpendicularity, an angle bracket is among the precise mounting angles. Thanks to their stiffening rib, the angle bracket is also more solid and stiffer than conventional mounting angles and offers a precise, robust and secure connection.
MISUMI offers angle brackets with configurable through holes and dowel pin bores. The through hole can be converted to a tapped hole using the [MC] option. In addition, with the help of the option [LN, HN], the through hole of the angle brackets can be changed to an elongated hole. The angle bracket itself or the element to be fastened can thus be adjusted. The optional dowel pin holes in conjunction with dowel pins offer the possibility of aligning and mounting components such as manual stages, cylinders or other devices as accurately as possible on an angle bracket.
Our angle brackets are also available as blanks without mounting holes for individual machining.
Due to the many variations of an angle bracket, it offers design flexibility. This allows adapting it to the machine environment. With MISUMI, you can configure and have your steel brackets customized or stainless steel angles customized.
Angle brackets are often used as cylinder holders for air cylinders, as the exact straightness and exact position of the dowel pin bores allow for exact positioning of the cylinders. An angle console is also suitable for holding and holding positioning stages. Occasionally, the angle bracket is also used in clamping technology to accommodate the push-pull toggle clamps, clamp cylinder or gripper.
MISUMI offers for assembly different threaded rods and nuts, as well as washers.

 

Steel angle bracket/steel bracket

The benefits an angle bracket made of steel (cast steel) provides are primarily its high strength and the load capacity of the base material. As a result, steel angle brackets can absorb high loads.
Since steel has good quality, it is less expensive to manufacture, easy to rework and welds well. Compared to many other metallic raw materials, steel is quite cost-effective and can therefore be found in many applications.
Thanks to its good thermal conductivity, a steel angle or steel angle bracket can be used in areas with high temperatures. Since steel tends to oxidize, a coating should be provided as much as possible depending on the angle bracket. For this purpose, you can choose between either burnished, nickel-plated or primed.

 

Stainless steel angle bracket/stainless steel bracket

Angle brackets made of steel or stainless steel are characterized by their high durability. Thanks to their resistance, stainless steel angle brackets are very robust and stable. They are less prone to corrosion because the chrome content forms a passive layer (oxide film). Especially in corrosive environments, it is possible to use an angle bracket made of stainless steel (stainless steel), since the base material is very high-quality. Stainless steel also has high temperature resistance and can be welded. However, at higher temperatures, or even when welding the material, discoloration can occur (tempering colour). The stainless steel angles are also hygienic due to the material and are often used in medical technology.

 

Aluminum angle bracket/aluminum bracket

An important advantage of aluminum angle brackets is their reduced weight compared to steel or stainless steel angle brackets. This special feature can contribute to weight reduction in many applications. With regard to the low weight, the aluminum angle brackets have by comparison a high strength and can withstand high loads.
In addition, the simple processing and post-processing of the material makes the aluminum angle consoles cost-efficient. Similar to stainless steel, aluminum forms an oxide film and is thus well protected against corrosion. Another advantage of the angle bracket made of aluminum is that the base material has a low thermal expansion. This allows these angle consoles to be used in applications that are subject to frequent temperature changes. Angle consoles made of aluminum also have good electrical conductivity and can thus dissipate electrical voltages such as electrical static charges. This is often necessary in electrical systems or in the electronics industry for the production of electronic components.

 

Application Examples - Angle Brackets

Application example: angle bracket - angle bracket with cylinder - angle bracket with guided cylinder - holder cylinder - cylinder holder

Application example: angle bracket with guide cylinder
(1) Angle bracket, (2) Hexagon socket screw, (3) Air cylinder, (4) Dowel pin

Application example: angle bracket - angle bracket with quick clamp - angle bracket with clamping function

Application example: angle bracket with push-pull toggle clamps
(1) Mounting plate, (2) push-pull toggle clamps, (3) angle bracket

Application example: angle bracket - angle bracket with cylinder - angle bracket with cylinder pin bore - cylinder holder - cylinder brackets

Application example: angle bracket with cylinder
(1) Angle bracket, (2) hinge bolts, (3) cylinder

 

 

Industrial Applications

3D printer industry
Automotive industry
Pharmaceutical industry
Packaging industry

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. Next >>
Part Number
AIKDF100-A50-B[50-75/1]-Y[35-55/1]-G[30-50/1]
AIKDF100-A100-B[50-75/1]-X[35-55/1]-F[30-50/1]-Y[35-55/1]-G[30-50/1]
AIKDF150-A70-B[50-75/1]-Y[35-105/1]-G[30-100/1]
AIKDF150-A100-B[50-75/1]-X[35-55/1]-F[30-50/1]-Y[35-105/1]-G[30-100/1]
AIKDF200-A120-B[50-75/1]-X[35-75/1]-F[30-70/1]-Y[35-155/1]-G[30-150/1]
AIKDF250-A120-B[50-75/1]-X[40-75/1]-F[30-65/1]-Y[50-205/1]-G[30-185/1]
AIKDF300-A150-B[50-75/1]-X[40-105/1]-F[30-95/1]-Y[50-255/1]-G[30-235/1]
AIKDF350-A150-B[50-75/1]-X[40-105/1]-F[30-95/1]-Y[50-305/1]-G[30-285/1]
AIKDF400-A150-B[50-75/1]-X[40-105/1]-F[30-95/1]-Y[50-355/1]-G[30-335/1]
AIKF100-A50-B[50-75/1]-Y[35-55/1]-G[30-50/1]
AIKF100-A100-B[50-75/1]-X[35-55/1]-F[30-50/1]-Y[35-55/1]-G[30-50/1]
AIKF150-A70-B[50-75/1]-Y[35-105/1]-G[30-100/1]
AIKF150-A100-B[50-75/1]-X[35-55/1]-F[30-50/1]-Y[35-105/1]-G[30-100/1]
AIKF200-A120-B[50-75/1]-X[35-75/1]-F[30-70/1]-Y[35-155/1]-G[30-150/1]
AIKF250-A120-B[50-75/1]-X[40-75/1]-F[30-65/1]-Y[50-205/1]-G[30-185/1]
AIKF300-A150-B[50-75/1]-X[40-105/1]-F[30-95/1]-Y[50-255/1]-G[30-235/1]
AIKF350-A150-B[50-75/1]-X[40-105/1]-F[30-95/1]-Y[50-305/1]-G[30-285/1]
AIKF400-A150-B[50-75/1]-X[40-105/1]-F[30-95/1]-Y[50-355/1]-G[30-335/1]
BIKDF100-A50-B[50-75/1]-Y[35-55/1]-G[30-50/1]
BIKDF100-A50S-Y[35-55/1]-G[30-50/1]
BIKDF100-A100-B[50-75/1]-X[35-55/1]-F[30-50/1]-Y[35-55/1]-G[30-50/1]
BIKDF150-A50-Y[35-105/1]-G[30-100/1]
BIKDF150-A70-B[50-75/1]-Y[35-105/1]-G[30-100/1]
BIKDF150-A75-B[40-50/1]-X[35-40/1]-Y[35-105/1]-G[30-100/1]
BIKDF150-A100-B[50-75/1]-X[35-55/1]-F[30-50/1]-Y[35-105/1]-G[30-100/1]
BIKDF200-A75-B[40-50/1]-X[35-40/1]-Y[35-155/1]-G[30-150/1]
BIKDF200-A120-B[50-75/1]-X[35-75/1]-F[30-70/1]-Y[35-155/1]-G[30-150/1]
BIKDF250-A120-B[50-75/1]-X[40-75/1]-F[30-65/1]-Y[50-205/1]-G[30-185/1]
BIKDF300-A150-B[50-75/1]-X[40-105/1]-F[30-95/1]-Y[50-255/1]-G[30-235/1]
BIKDF350-A150-B[50-75/1]-X[40-105/1]-F[30-95/1]-Y[50-305/1]-G[30-285/1]
BIKDF400-A150-B[50-75/1]-X[40-105/1]-F[30-95/1]-Y[50-355/1]-G[30-335/1]
BIKF100-A50-B[50-75/1]-Y[35-55/1]-G[30-50/1]
BIKF100-A50S-Y[35-55/1]-G[30-50/1]
BIKF100-A100-B[50-75/1]-X[35-55/1]-F[30-50/1]-Y[35-55/1]-G[30-50/1]
BIKF150-A50-Y[35-105/1]-G[30-100/1]
BIKF150-A70-B[50-75/1]-Y[35-105/1]-G[30-100/1]
BIKF150-A75-B[40-50/1]-X[35-40/1]-Y[35-105/1]-G[30-100/1]
BIKF150-A100-B[50-75/1]-X[35-55/1]-F[30-50/1]-Y[35-105/1]-G[30-100/1]
BIKF200-A75-B[40-50/1]-X[35-40/1]-Y[35-155/1]-G[30-150/1]
BIKF200-A120-B[50-75/1]-X[35-75/1]-F[30-70/1]-Y[35-155/1]-G[30-150/1]
BIKF250-A120-B[50-75/1]-X[40-75/1]-F[30-65/1]-Y[50-205/1]-G[30-185/1]
BIKF300-A150-B[50-75/1]-X[40-105/1]-F[30-95/1]-Y[50-255/1]-G[30-235/1]
BIKF350-A150-B[50-75/1]-X[40-105/1]-F[30-95/1]-Y[50-305/1]-G[30-285/1]
BIKF400-A150-B[50-75/1]-X[40-105/1]-F[30-95/1]-Y[50-355/1]-G[30-335/1]
IKDF100-A50-B[50-75/1]-Y[35-55/1]-G[30-50/1]
IKDF100-A50S-Y[35-55/1]-G[30-50/1]
IKDF100-A100-B[50-75/1]-X[35-55/1]-F[30-50/1]-Y[35-55/1]-G[30-50/1]
IKDF150-A50-Y[35-105/1]-G[30-100/1]
IKDF150-A70-B[50-75/1]-Y[35-105/1]-G[30-100/1]
IKDF150-A75-B[40-50/1]-X[35-40/1]-Y[35-105/1]-G[30-100/1]
IKDF150-A100-B[50-75/1]-X[35-55/1]-F[30-50/1]-Y[35-105/1]-G[30-100/1]
IKDF200-A75-B[40-50/1]-X[35-40/1]-Y[35-155/1]-G[30-150/1]
IKDF200-A120-B[50-75/1]-X[35-75/1]-F[30-70/1]-Y[35-155/1]-G[30-150/1]
IKDF250-A120-B[50-75/1]-X[40-75/1]-F[30-65/1]-Y[50-205/1]-G[30-185/1]
IKDF300-A150-B[50-75/1]-X[40-105/1]-F[30-95/1]-Y[50-255/1]-G[30-235/1]
IKDF350-A150-B[50-75/1]-X[40-105/1]-F[30-95/1]-Y[50-305/1]-G[30-285/1]
IKDF400-A150-B[50-75/1]-X[40-105/1]-F[30-95/1]-Y[50-355/1]-G[30-335/1]
IKF100-A50-B[50-75/1]-Y[35-55/1]-G[30-50/1]
IKF100-A50S-Y[35-55/1]-G[30-50/1]
IKF100-A100-B[50-75/1]-X[35-55/1]-F[30-50/1]-Y[35-55/1]-G[30-50/1]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSMaterial Hole Machining Surface Treatment Height H
(mm) 		Dimension A
(mm) 		B
(mm) 		F
(mm) 		G
(mm) 		X
(mm) 		Y
(mm)

-

1 9 Days 10AluminumThrough HoleNot Provided1005050 ～ 75-30 ～ 50-35 ～ 55

-

1 9 Days 10AluminumThrough HoleNot Provided10010050 ～ 7530 ～ 5030 ～ 5035 ～ 5535 ～ 55

-

1 9 Days 10AluminumThrough HoleNot Provided1507050 ～ 75-30 ～ 100-35 ～ 105

-

1 9 Days 10AluminumThrough HoleNot Provided15010050 ～ 7530 ～ 5030 ～ 10035 ～ 5535 ～ 105

-

1 9 Days 10AluminumThrough HoleNot Provided20012050 ～ 7530 ～ 7030 ～ 15035 ～ 7535 ～ 155

-

1 9 Days 10AluminumThrough HoleNot Provided25012050 ～ 7530 ～ 6530 ～ 18540 ～ 7550 ～ 205

-

1 9 Days 10AluminumThrough HoleNot Provided30015050 ～ 7530 ～ 9530 ～ 23540 ～ 10550 ～ 255

-

1 9 Days 10AluminumThrough HoleNot Provided35015050 ～ 7530 ～ 9530 ～ 28540 ～ 10550 ～ 305

-

1 9 Days 10AluminumThrough HoleNot Provided40015050 ～ 7530 ～ 9530 ～ 33540 ～ 10550 ～ 355

-

1 9 Days 10AluminumThrough Holes and Dowel HolesNot Provided1005050 ～ 75-30 ～ 50-35 ～ 55

-

1 9 Days 10AluminumThrough Holes and Dowel HolesNot Provided10010050 ～ 7530 ～ 5030 ～ 5035 ～ 5535 ～ 55

-

1 9 Days 10AluminumThrough Holes and Dowel HolesNot Provided1507050 ～ 75-30 ～ 100-35 ～ 105

-

1 9 Days 10AluminumThrough Holes and Dowel HolesNot Provided15010050 ～ 7530 ～ 5030 ～ 10035 ～ 5535 ～ 105

-

1 9 Days 10AluminumThrough Holes and Dowel HolesNot Provided20012050 ～ 7530 ～ 7030 ～ 15035 ～ 7535 ～ 155

-

1 9 Days 10AluminumThrough Holes and Dowel HolesNot Provided25012050 ～ 7530 ～ 6530 ～ 18540 ～ 7550 ～ 205

-

1 9 Days 10AluminumThrough Holes and Dowel HolesNot Provided30015050 ～ 7530 ～ 9530 ～ 23540 ～ 10550 ～ 255

-

1 9 Days 10AluminumThrough Holes and Dowel HolesNot Provided35015050 ～ 7530 ～ 9530 ～ 28540 ～ 10550 ～ 305

-

1 9 Days 10AluminumThrough Holes and Dowel HolesNot Provided40015050 ～ 7530 ～ 9530 ～ 33540 ～ 10550 ～ 355

-

1 9 Days 10SteelThrough HoleBlack Oxide1005050 ～ 75-30 ～ 50-35 ～ 55

-

1 9 Days 10SteelThrough HoleBlack Oxide10050 (W 50)--30 ～ 50-35 ～ 55

-

1 9 Days 10SteelThrough HoleBlack Oxide10010050 ～ 7530 ～ 5030 ～ 5035 ～ 5535 ～ 55

-

1 9 Days 10SteelThrough HoleBlack Oxide15050--30 ～ 100-35 ～ 105

-

1 9 Days 10SteelThrough HoleBlack Oxide1507050 ～ 75-30 ～ 100-35 ～ 105

-

1 9 Days 10SteelThrough HoleBlack Oxide1507540 ～ 50-30 ～ 10035 ～ 4035 ～ 105

-

1 9 Days 10SteelThrough HoleBlack Oxide15010050 ～ 7530 ～ 5030 ～ 10035 ～ 5535 ～ 105

-

1 9 Days 10SteelThrough HoleBlack Oxide2007540 ～ 50-30 ～ 15035 ～ 4035 ～ 155

-

1 9 Days 10SteelThrough HoleBlack Oxide20012050 ～ 7530 ～ 7030 ～ 15035 ～ 7535 ～ 155

-

1 9 Days 10SteelThrough HoleBlack Oxide25012050 ～ 7530 ～ 6530 ～ 18540 ～ 7550 ～ 205

-

1 9 Days 10SteelThrough HoleBlack Oxide30015050 ～ 7530 ～ 9530 ～ 23540 ～ 10550 ～ 255

-

1 9 Days 10SteelThrough HoleBlack Oxide35015050 ～ 7530 ～ 9530 ～ 28540 ～ 10550 ～ 305

-

1 9 Days 10SteelThrough HoleBlack Oxide40015050 ～ 7530 ～ 9530 ～ 33540 ～ 10550 ～ 355

-

1 9 Days 10SteelThrough Holes and Dowel HolesBlack Oxide1005050 ～ 75-30 ～ 50-35 ～ 55

-

1 9 Days 10SteelThrough Holes and Dowel HolesBlack Oxide10050 (W 50)--30 ～ 50-35 ～ 55

-

1 9 Days 10SteelThrough Holes and Dowel HolesBlack Oxide10010050 ～ 7530 ～ 5030 ～ 5035 ～ 5535 ～ 55

-

1 9 Days 10SteelThrough Holes and Dowel HolesBlack Oxide15050--30 ～ 100-35 ～ 105

-

1 9 Days 10SteelThrough Holes and Dowel HolesBlack Oxide1507050 ～ 75-30 ～ 100-35 ～ 105

-

1 9 Days 10SteelThrough Holes and Dowel HolesBlack Oxide1507540 ～ 50-30 ～ 10035 ～ 4035 ～ 105

-

1 9 Days 10SteelThrough Holes and Dowel HolesBlack Oxide15010050 ～ 7530 ～ 5030 ～ 10035 ～ 5535 ～ 105

-

1 9 Days 10SteelThrough Holes and Dowel HolesBlack Oxide2007540 ～ 50-30 ～ 15035 ～ 4035 ～ 155

-

1 9 Days 10SteelThrough Holes and Dowel HolesBlack Oxide20012050 ～ 7530 ～ 7030 ～ 15035 ～ 7535 ～ 155

-

1 9 Days 10SteelThrough Holes and Dowel HolesBlack Oxide25012050 ～ 7530 ～ 6530 ～ 18540 ～ 7550 ～ 205

-

1 9 Days 10SteelThrough Holes and Dowel HolesBlack Oxide30015050 ～ 7530 ～ 9530 ～ 23540 ～ 10550 ～ 255

-

1 9 Days 10SteelThrough Holes and Dowel HolesBlack Oxide35015050 ～ 7530 ～ 9530 ～ 28540 ～ 10550 ～ 305

-

1 9 Days 10SteelThrough Holes and Dowel HolesBlack Oxide40015050 ～ 7530 ～ 9530 ～ 33540 ～ 10550 ～ 355

-

1 9 Days 10SteelThrough HolePrimer Paint (Gray)1005050 ～ 75-30 ～ 50-35 ～ 55

-

1 9 Days 10SteelThrough HolePrimer Paint (Gray)10050 (W 50)--30 ～ 50-35 ～ 55

-

1 9 Days 10SteelThrough HolePrimer Paint (Gray)10010050 ～ 7530 ～ 5030 ～ 5035 ～ 5535 ～ 55

-

1 9 Days 10SteelThrough HolePrimer Paint (Gray)15050--30 ～ 100-35 ～ 105

-

1 9 Days 10SteelThrough HolePrimer Paint (Gray)1507050 ～ 75-30 ～ 100-35 ～ 105

-

1 9 Days 10SteelThrough HolePrimer Paint (Gray)1507540 ～ 50-30 ～ 10035 ～ 4035 ～ 105

-

1 9 Days 10SteelThrough HolePrimer Paint (Gray)15010050 ～ 7530 ～ 5030 ～ 10035 ～ 5535 ～ 105

-

1 9 Days 10SteelThrough HolePrimer Paint (Gray)2007540 ～ 50-30 ～ 15035 ～ 4035 ～ 155

-

1 9 Days 10SteelThrough HolePrimer Paint (Gray)20012050 ～ 7530 ～ 7030 ～ 15035 ～ 7535 ～ 155

-

1 9 Days 10SteelThrough HolePrimer Paint (Gray)25012050 ～ 7530 ～ 6530 ～ 18540 ～ 7550 ～ 205

-

1 9 Days 10SteelThrough HolePrimer Paint (Gray)30015050 ～ 7530 ～ 9530 ～ 23540 ～ 10550 ～ 255

-

1 9 Days 10SteelThrough HolePrimer Paint (Gray)35015050 ～ 7530 ～ 9530 ～ 28540 ～ 10550 ～ 305

-

1 9 Days 10SteelThrough HolePrimer Paint (Gray)40015050 ～ 7530 ～ 9530 ～ 33540 ～ 10550 ～ 355

-

1 9 Days 10SteelThrough Holes and Dowel HolesPrimer Paint (Gray)1005050 ～ 75-30 ～ 50-35 ～ 55

-

1 9 Days 10SteelThrough Holes and Dowel HolesPrimer Paint (Gray)10050 (W 50)--30 ～ 50-35 ～ 55

-

1 9 Days 10SteelThrough Holes and Dowel HolesPrimer Paint (Gray)10010050 ～ 7530 ～ 5030 ～ 5035 ～ 5535 ～ 55

Loading...

  1. 1
  2. 2
  3. Next >>

Back to the Category Angle Brackets

Technical Drawing - Angle Brackets


Open the technical drawing in the new window

Specifications Tables - Angle Brackets

■Through Holes

Part NumberAAngle Plate BodyThrough Hole
WTT1Side A and HSide ASide HHole Dia.
TypeH1mm Increment
BXFYGd
IKDF
(Primer Paint (Gray))
BIKDF
(Black Oxide)
MIKDF
(Electroless Nickel Plating)
AIKDF
(Aluminum Casting)		100*50S501583035-35~5530~509
501001450~7511
10035~5530~50
15050501583035-35~10530~1009
701001450~754011
757540~5035~40
10010050~7535~5530~50
2007575151440~5035~40-35~15530~15011
12010050~7535~7530~70
250120100181550~7540~7530~6550~20530~18511
300150181550~7540~10530~9550~25530~235
35050~7550~30530~285
40050~7550~35530~335
Y+G≤H-15, X+F≤A-15 When A=50 or 70, the ordering code X and F are not required. When A=75, the ordering code F is not required. When A=50, the ordering code B is not required.
*Except for A dimension, dimensions of A=50S is smaller than those of A=50.

■Through Holes and Dowel Holes
Part NumberAAngle Plate BodyThrough HoleDowel Hole
WTT1Side A and HSide ASide HHole Dia.Side ASide HHole Dia.
TypeH1mm Increment
BXFYGdahDH7
IKF
(Primer Paint (Gray))
BIKF
(Black Oxide)
MIKF
(Electroless Nickel Plating)
AIKF
(Aluminum Casting)		100*50S501583035-35~5530~509-Y+(G/2)6
501001450~751110
10035~5530~50X+(F/2)
15050501583035-35~10530~1009-6
701001450~7540115510
757540~5035~40
10010050~7535~5530~50X+(F/2)
2007575151440~5035~40-35~15530~150115510
12010050~7535~7530~70X+(F/2)
250120100181550~7540~7530~6550~20530~18511X+(F/2)10
300150181550~7540~10530~9550~25530~235
35050~7550~30530~285
40050~7550~35530~335
Y+G≤H-15, X+F≤A-15 When A=50 or 70, the ordering code X and F are not required. When A=75, the ordering code F is not required. When A=50, the ordering code B is not required.
*Except for A dimension, dimensions of A=50S is smaller than those of A=50.

Alterations - Angle Brackets

Angle Plates/Cast Iron/Aluminum-/Stainless Casting/Configurable Hole Position:Related Image
 

Basic information

Strength Standard (Cast)

Configure

Clear all

96Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Material

    • Steel
    • Aluminum

    Clear

  • Hole Machining

    • Through Hole
    • Through Holes and Dowel Holes

    Clear

  • Surface Treatment

    • Electroless Nickel Plating
    • Black Oxide
    • Primer Paint (Gray)
    • Not Provided

    Clear

  • Height H(mm)

    • 100
    • 150
    • 200
    • 250
    • 300
    • 350
    • 400

    Clear

  • Dimension A(mm)

    • 50
    • 50 (W 50)
    • 70
    • 75
    • 100
    • 120
    • 150

    Clear

  • B(mm)

     [40-75/1mm Unit(s)]

    Clear

  • F(mm)

     [30-95/1mm Unit(s)]

    Clear

  • G(mm)

     [30-335/1mm Unit(s)]

    Clear

  • X(mm)

     [35-105/1mm Unit(s)]

    Clear

  • Y(mm)

     [35-355/1mm Unit(s)]

    Clear

  • Type

    • AIKDF
    • AIKF
    • BIKDF
    • BIKF
    • IKDF
    • IKF
    • MIKDF
    • MIKF

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 9 Days or Less

    Reset

Optional Attributes

Frequently Asked Questions (FAQ)

Question:

What do you use the angle brackets for?
Answer:

An angle bracket can be used for a wide variety of applications in mechanical engineering. In general, they are used to connect or fix different components and devices. Angle brackets are manufactured very precisely with their perpendicularity compared to conventional mounting angles. Therefore, angle brackets are also frequently used to accommodate pneumatic cylinders, positioning stages, and stages. Another benefit of the angle bracket is its high rigidity due to the additional stiffening rib. This provides the angle bracket with a very good stability. Therefore, it can absorb heavier loads compared to normal angles.
Question:

What are the different types of steel on angle brackets?
Answer:

MISUMI offers the massive and precise angle bracket in two different types of steel. The MISUMI product range offers the material EN 1.0038 equivalent, which is also known as S235JR. This material is often used for extruded profiles. This shows good ductility, toughness and plasticity. As a further material, the range contains the EN-JL 1040 equivalent. This is grey cast iron with slat graphite, which has very good workability and is often used in machine tools.
Question:

What coatings are available for angle brackets made of steel?
Answer:

Our angle brackets are available untreated for further processing. To protect against corrosion, the angle bracket can be burnished, primed (grey) and nickel-plated.
Question:

What are the advantages of aluminum brackets?
Answer:

Aluminum brackets and aluminum angle brackets have a low weight and are therefore suitable for weight reduction. Aluminum, on the other hand, has a high strength in relation to heavier materials. As a result, these are also suitable for high loads. Another advantage is that aluminum does not require further corrosion protection. In addition, aluminum has a low thermal expansion, which gives it dimensional stability in case of temperature fluctuations.

Show more FAQ Close

Complementary Products

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.