Helical Rack Gears - L Fixed (HRGEA2.0-500-N)
Click on this image to zoom in.
Click on this image to zoom in.
Product Details:
Manufacturer part number: HRGEA2.0-500-N
Brand: MISUMI
Price: 131.13 €
Delivery time: 7 Days
Technical Data:
Module: 2
Length L: 500 mm
Length (nominal): 500
Number of Effective Teeth: 75 teeth
Tooth Width W (or D): 20 mm
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
HRGEA2.0-500-N
- Drawing / Specifications
- 3D Preview 3D preview is available after complete configuration
- Part Numbers
- More Information
| Gear Specifications | |
| Datum Section of Gears | Teeth perpendicular |
| Module | 1.0 to 3.0 |
| Pressure Angle | 20° |
| Helix Angle | 19° 31’42" RH |
|  | |||||
Enlarged View of End Face (Both Ends Machined Type)
| ||||||
| [ ! ] F = L－B× (K－1)2 |
| Type | [M] Material | [S] Surface Treatment |
| HRGEA | EN 1.1191 Equiv. | Black Oxide |
[ ! ] Both ends are machined to be able to connect to helical rack gears.
Specification Table
| Part Number | — | L | — | Hole Machining |
| HRGEA1.0 HRGEA1.0 | — — | 300 500 | — — | HT N |
| Module | |||
| 0.5 | 1.0 to 1.5 | 2.0 to 2.5 | 3.0 |
| 110 | 115 | 120 | 130 |
| Part Number | L | Hole Machining | Effective Number of Teeth | P (Front Surface Pitch) | W | H | h | B (Hole Pitch) | M (Coarse) | d1 | d2 | Z1 | K (Number of Holes) | |
| Type | Module | |||||||||||||
| HRGEA | 1.0 | 100 | N (No Hole Machining) HT (Back Tapped) ST (Side Tapped) Z (Side Counterbored) | 30 | 3.333 | 10 | 15 | 14 | — | — | — | — | — | — |
| 300 | 90 | 180 | M3 | 3.5 | 6.5 | 3.5 | 2 | |||||||
| 500 | 150 | 3 | ||||||||||||
| 1000 | 300 | 6 | ||||||||||||
| 1.5 | 100 | 20 | 5 | 15 | 20 | 18.5 | — | — | — | — | — | — | ||
| 300 | 60 | 180 | M4 | 4.5 | 8 | 4.5 | 2 | |||||||
| 500 | 100 | 3 | ||||||||||||
| 1000 | 200 | 6 | ||||||||||||
| 2.0 | 100 | 15 | 6.667 | 20 | 25 | 23 | — | — | — | — | — | — | ||
| 300 | 45 | 180 | M5 | 5.5 | 9.5 | 5.5 | 2 | |||||||
| 500 | 75 | 3 | ||||||||||||
| 1000 | 150 | 6 | ||||||||||||
| 2.5 | 100 | 12 | 8.333 | 25 | 30 | 27.5 | — | — | — | — | — | — | ||
| 300 | 36 | 180 | M6 | 6.5 | 11 | 6.5 | 2 | |||||||
| 500 | 60 | 3 | ||||||||||||
| 1000 | 120 | 6 | ||||||||||||
| 3.0 | 100 | 10 | 10 | 30 | 35 | 32 | — | — | — | — | — | — | ||
| 300 | 30 | 180 | M8 | 9.0 | 14 | 9.0 | 2 | |||||||
| 500 | 50 | 3 | ||||||||||||
| 1000 | 100 | 6 | ||||||||||||
Alterations
| Alterations | Tapped Hole Dimension Change | |||||||||||||
| Code | TPC | |||||||||||||
| Spec. | Changes the tapped hole dimension. Ordering Code TPC4
|
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Part Number
|
|---|
| HRGEA2.0-500-N |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Module | Length L (mm) | Length (nominal) | Number of Effective Teeth (teeth) | Tooth Width W (or D) (mm) | Rack Height (mm) | Nominal | Hole Machining | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
131.13 € | 1 | 7 Days | 2 | 500 | 500 | 75 | 20 | 25 | 500 | N (No Hole Machining) |
Loading...
Specifications/Overview
How to Connect Rack GearsMIFree Cutting SteelI Helical Rack Gears are end machined with negative pitch tolerance in length.
When connecting, use an assembly gauge from the same module as a spacer jig as shown in the figure below to properly adjust the pitch.
Basic information
| Tooth Type | Helical | Environmentally friendly | RoHS Compliant (10 Substances) | Shape | Rack Gears |
|---|---|---|---|---|---|
| Characteristics/Applications | Not Applicable | Material | EN 1.1191 Equiv. | Heat Treatment | Not Provided |
| Ground Tooth | Not Provided | Surface Treatment | Black Oxide | Material Details | EN 1.1191 Equiv. |
| End Face Machining | Both Ends Machined Type |
This page is Helical Rack Gears - L Fixed, part number HRGEA2.0-500-N.
You can find the detail information about specifications and dimensions on part number HRGEA2.0-500-N.
Configure
Basic Attributes
-
Type
- HRGEA
-
Module
-
Length L(mm)
-
Length (nominal)
-
Number of Effective Teeth(teeth)
-
Tooth Width W (or D)(mm)
-
Nominal
- 100
- 300
- 500
- 1000
-
Hole Machining
- HT (Rear Face Tapped)
- N (No Hole Machining)
- ST (Side Face Tapped)
- Z (Side Countersunk Holes)
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 7 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Variation of this product
| Part Number |
|---|
| HRGEA1.0-300-N |
| HRGEA1.0-300-Z |
| HRGEA1.0-500-N |
| HRGEA2.0-500-Z |
| HRGEA2.5-100-N |
| HRGEA2.5-1000-N |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | Module | Length L (mm) | Length (nominal) | Number of Effective Teeth (teeth) | Tooth Width W (or D) (mm) | Rack Height (mm) | Nominal | Hole Machining |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
83.30 € | 1 | 7 Days | 1 | 300 | 300 | 90 | 10 | 15 | 300 | N (No Hole Machining) | ||
95.61 € | 1 | 7 Days | 1 | 300 | 300 | 90 | 10 | 15 | 300 | Z (Side Countersunk Holes) | ||
105.93 € | 1 | 7 Days | 1 | 500 | 500 | 150 | 10 | 15 | 500 | N (No Hole Machining) | ||
92.22 € | 1 | 7 Days | 2 | 500 | 500 | 75 | 20 | 25 | 500 | Z (Side Countersunk Holes) | ||
76.37 € | 1 | 7 Days | 2.5 | 100 | 100 | 12 | 25 | 30 | 100 | N (No Hole Machining) | ||
204.85 € | 1 | 7 Days | 2.5 | 1000 | 1000 | 120 | 25 | 30 | 1000 | N (No Hole Machining) |
Complementary Products
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.