Air Cylinder, Standard Type, Lubrication-Free Type, 55-CS1 Series (Part Numbers)
Compliance with the ATEX Directive is required for equipment used in potentially explosive atmospheres within the EU from July 1, 2003.
■ CE Mark and ATEX
The ATEX Directive is part of the CE Mark scheme and incorporates existing European explosion-proof standards.
■ Goals of the ATEX Directive
The principal goals of ATEX are as follows.
· Prevention of static charge
· Prevention of ignition by sparks generated by friction, impact and wear
· Prevention of ignition due to temperature rise due to the same causes as above
· Manufacturers are responsible
· Certified by zone/category
■ Zone/category classifications
ATEX categorizes targets for application by each classification of danger zone.
· Zone 0: Category 1
Potential for explosive atmosphere to be present (zone): Continuous or long-term, >1,000 hours/year
· Zone 1: Category 2
Potential for explosive atmosphere to be present (zone): Occasional, 10 to 1,000 hours/year
· Zone 2: Category 3
Potential for explosive atmosphere to be present (zone): Unlikely or short-term, <10 hours/year
(i)Remark
- ■ SMC Air Cylinder Product Selection and Technical Information
Please check the special page from here.
■About SMC product handling
products without a web page will be released one by one.
If you have a fixed model number, please request a quote / order from here. - Refer to the manufacturer's catalog for specification and material details.
- Product images may be representative images only. Please refer to the manufacturer's catalog for shape details.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
- Product data
- CAD data not available
Part Number
|
|---|
| 55-CDS1BN200-250 |
| 55-CDS1BN200-750 |
| 55-CDS1DN200-250 |
| 55-CDS1FN180-200 |
| 55-CS1BN140-260 |
| 55-CS1BN250-700 |
| 55-CS1DFN125-300 |
| 55-CS1DFN160-300 |
| 55-CS1DN180-450 |
| 55-CS1DN250-600 |
| 55-CS1FN300-475 |
| 55-CS1TN250-600 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | Cylinder I.D: D (Ø) | Stroke: L (mm) | Specifications | Type of Mount Support | Tube Material | |
|---|---|---|---|---|---|---|---|---|---|
1,358.32 € | 1 | 64 Days | 200 | 250 | Built-in magnet | Basic type | Iron tube | ||
1,894.73 € | 1 | 98 Days | 200 | 750 | Built-in magnet | Basic type | Iron tube | ||
1,358.32 € | 1 | 64 Days | 200 | 250 | Built-in magnet | Double clevis | Iron tube | ||
1,161.21 € | 1 | 46 Days | 180 | 200 | Built-in magnet | Rod-end flange type | Iron tube | ||
728.61 € | 1 | 64 Days | 140 | 260 | Without magnet | Basic type | Aluminum tube | ||
2,595.32 € | 1 | 64 Days | 250 | 700 | Without magnet | Basic type | Iron tube | ||
652.35 € | 1 | 64 Days | 125 | 300 | Without magnet | Double clevis | Iron tube | ||
864.35 € | 1 | 64 Days | 160 | 300 | Without magnet | Double clevis | Iron tube | ||
1,387.95 € | 1 | 68 Days | 180 | 450 | Without magnet | Double clevis | Iron tube | ||
2,442.68 € | 1 | 64 Days | 250 | 600 | Without magnet | Double clevis | Iron tube | ||
3,060.65 € | 1 | 98 Days | 300 | 475 | Without magnet | Rod-end flange type | Iron tube | ||
2,708.40 € | 1 | 64 Days | 250 | 600 | Without magnet | Center trunnion type | Iron tube |
Loading...
Basic information
| Cylinder Operation Method | Double Acting | Rod Operation Method | Single Rods | Main Body Shape | Standard |
|---|---|---|---|---|---|
| Additional Function | Standard | Environment, Applications | Standard | Operating Temperature(℃) | 0::70 |
| Operating Pressure(MPa) | 0.05::0.97 | Cushion | With cushions on both sides | Port thread type | Rc |
| Type | Non-lube |
Configure
Basic Attributes
-
Cylinder I.D: D(Ø)
-
Stroke: L(mm)
-
Specifications
- Built-in magnet
- Without magnet
-
Type of Mount Support
- Basic type
- Center trunnion type
- Double clevis
- Rod-end flange type
-
Tube Material
- Aluminum tube
- Iron tube
-
Type
- 55-CDS1
- 55-CS1
Filter by standard shipping days
-
- All
- 46 Days or Less
- 64 Days or Less
- 68 Days or Less
- 98 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.