Square Connectors（Application：For PCB）

?* Information on days to ship and prices

• 

  PCR Series

  HONDA TSUSHIN KOGYO

  Bellows, high-density contact type and accessories are, as with the PCS series, applicable to various uses.
  
  [Features]
  · A wide range of cores of 20 to 96 are available from the board to the cable.
  · For EMI measures other than FCC.
  · A wide range of cores of 20 to 128 are available from board to board.
  · Products enabling live wire connection (three steps) are available.
  · Parallel mating is feasible through a housing guide mechanism and the structure prevents shorting between adjacent contacts.
  · Ideal for connection to horizontal, parallel, and vertical backs.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	6.72 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  MR Series

  HONDA TSUSHIN KOGYO

  Small-type/multi-pin connector developed for use with data devices which uses wide-type terminals with exceptional reliability.
  
  [Features]
  · Dual screw and a spring lock mechanism that can withstand any shock.
  · Dust-proof mechanism with excellent environmental resistance.
  · Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
  · A relay type case is also provided

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	5.03 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  MX23A Series, Contact

  JAPAN AVIATION ELECTRONICS(JAE)

  [Features]
  · A small low-profile connector, which can be widely used in vehicles, motor bikes and other types of waterproof equipment.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	6.12 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  IL-AG7 Series

  JAPAN AVIATION ELECTRONICS(JAE)

  This pin connector has flanges to screw in to the board.
  
  [Features]
  ・This pin connector has flanges on both sides of the insulator to screw in to the board.
  ・By screwing in using the flanges, it can be fixed more firmly to the board.
  ・The straight type is molded to alleviate stress on the soldered parts, which prevents cracking of solder due to changes in temperature.
  ・This prevents differences in expansion coefficient between the board and insulator due to rapid temperature changes, and solder cracking caused by vibration.
  ・The conformation of the fitting element and color are different from the standard type (standard: green, mismatch prevention: light blue), so the product is ideal for use when two connectors are used next to each other with the same number of poles.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	2.16 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  SUMICON 1600 Series Multi-Contact Rectangular Connector

  HIROSE ELECTRONIC

  A rectangular multi-contact connector manufactured using a unique HIROSE design.
  [Features]
  · Nine contact configurations (8, 12, 16, 20, 24, 28, 34, 45, 60) are available. Solder type, wrapping type and crimp type connector units are available.
  · Accessories include C case, CA case, CBA case, ST stopper, STA stopper, STB stopper, etc. that can be combined for use in a wide range of applications.
  · The connector unit and accessories (cases, stoppers) are completely separate in the SUMICON 1600 series. This means that they can be combined for a variety of uses as well as enabling easier wiring connections.
  · These connectors are specified in the NTT specifications, “Spec. No. 1931.”

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	1.59 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  D-Sub, D02, D02-M15 Series

  JAPAN AVIATION ELECTRONICS(JAE)

  A small, lightweight, highly reliable connector for making every type of electronic device smaller and more dense to support advanced features.
  
  [Features]
  ・The D-sub connector is becoming the standard with its combination of pin and socket connector types.
  ・Interchangeable with different connector types and commonly used accessories.
  ・The shell joint shape has polarity, fully preventing accidental reverse insertion.
  ・The DO2 series is a high-density mounting connector with approximately twice as many contacts inside the same shell size as the D-sub.
  ・The outer appearance is short and compact. The contact and insulation material is contained in a hard, steel shell.
  ・There are 5 shell sizes (E, A, B, C, and D), which come with 9, 15, 25, 37, and 50 cores. Special arrays with coaxial and high-current contacts are also available.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	2.52 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  IL-AG5 Series

  JAPAN AVIATION ELECTRONICS(JAE)

  [Features]
  · Mechanical lock structure for secure mating.
  · The locking method of the mechanical lock is strongly resistant to impact and pulling. By simply pushing in the plug, a distinct click sound accompanies the mating. Therefore, the successful mating can be confirmed when connecting to non-visible parts.
  · Unique housing structure.
  · The mating is highly reliable. The unique housing structure has protrusions and incorrect insertion prevention guides, which prevent adverse effects due to twisting when disconnecting.
  · The double locking structure securely prevents contact dropout.
  · The socket housing contact retainer uses a primary lock employing a contact lance and a secondary lock employing a flap that is integrated into the housing in two places. This provides a highly reliable double locking structure, which prevents contact dropout due to impacts or vibration.
  · The flap is mounted so as to push on the contact, temporarily locking the contact to prevent incomplete insertion.
  · Standard, and differently shaped incorrect insertion prevention types are available.
  · The fitting element conformation and color (standard type: green/incorrect insertion prevention type: light blue) differ from the standard type. Therefore, the product is ideally suited for configurations that incorporate two connectors side-by-side in identical numbers.
  · Contact featuring highly reliable design.
  · Box type, which is resilient to external effects such as deformation due to external forces.
  · Two-ply spring structure with excellent contact element characteristics.
  · The primary lance is on the inside of the contact provides horizontal insertion prevention.
  · Structure prevents reverse, horizontal insertion during housing mounting.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	2.16 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  MX31 Series

  JAPAN AVIATION ELECTRONICS(JAE)

  The number of pins in these connectors has increased along with the greater role of electronic control in automobiles. In addition, this non-waterproof, high-density type connector fulfills the need for a small and lightweight product.
  
  [Features]
  [High-density implementation achieved with a large number of pins]
  · These composite-type connectors include both signal (2.2 A) and power (5.7 A) internal circuits in the same connectors. These four-row type connectors are small, highly dense, and include a large number of pins with a 2.2 mm contact pitch (for signals), 3.2 mm contact pitch (for power), and up to a maximum of 135-pin connectors. Multiple socket connectors are combined together on the wire side for each single pin header on the circuit board side.
  [Mechanical lock structure ensures secure fitting]
  · The mechanical lock structure protects against vibrations and pulling. A distinct click sound helps confirm that secure fitting has occurred.
  [Double locking structure reliably prevents loss of contact]
  · Contact with the socket housing is maintained via a housing lance and an internal retainer contained in the housing. This double locking structure, which locks at two locations, reliably prevents loss of contact due to vibration or pulling.
  · The retainer's structure ensures that a contact cannot be set into the locking position unless it is completely inserted. This makes it possible to detect partial insertion of contacts.
  [Low insertion force structure with easy insertion and extraction]
  · A low insertion force type structure requiring 70 N or less of force per socket housing to achieve insertion makes insertion and extraction easy.
  [Tin and gold plating are available for the contact finish]
  · The standard finish for contacts is tin plating. Gold plating is also available for 135-pin pin headers, offering a higher level of contact reliability.
  [Misconfiguration-prevention types also available]
  · Pin headers (70-pin and 135-pin versions) and socket housings come in standard types as well as types with different mating part conformations in order to prevent incorrect configuration. Use of these types prevents incorrect fitting when two different pin headers with pins in the same positions are used next to each other.
  · Crimping enables easy connection.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	7.63 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Board-to-Cable Connector with 1.25-mm Pitch - DF13 Series【1-100 Pieces Per Package】

  HIROSE ELECTRONIC

  Connector for board-to-cable connection with 1.25-mm pitch. Choose from a number of variations from 2–40 pin, straight-mount, right-angle mount, DIP, and SMT.
  
  [Features]
  · Small.
  · A low-profile design with a mounting height of 5.8 mm. (The SMT mounting is a straight type, the DIP type is a straight 5.3-mm, and the right-angle type is 3.6-mm.)
  · Multipole
  · The dual-row type is a multipole connector with up to 40 pins. It is a high-density connector with a surface area of 30% compared to the single-row type.
  · Supports automatic mounting.
  · The header is available with a suction surface that supports vacuum suction . Therefore, automatic mounting using embossed packing is possible.
  · Complete basic functionality despite compact form factor.
  · The header includes a box structure to prevent twisting and ensure incorrect insertion is completely prevented.
  · Additionally, the Surface Mount (SMT) header is fitted with a reinforcement bracket to prevent solder from peeling.
  
  In-stock made-to-order products cannot be returned or canceled. Thank you for your understanding.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.22 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Discrete Wire Connector for Connection, DF3 Series (2 mm Pitch)【1-100 Pieces Per Package】

  HIROSE ELECTRONIC

  Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 1 terminal row. Can use for a wide range of equipment.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.12 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  DF11 Series 2‑mm Grid Double-Row Connector (UL / CSA Standard Certified Product)【1-500 Pieces Per Package】

  HIROSE ELECTRONIC

  [Features]
  · The contact configuration has been condensed into 2 rows with a 2-mm pitch and 5-mm width.
  · Allows for twice the number of signals with the same amount of space as a conventional 2‑mm pitch single-row connector.
  · Available with either crimped or IDC contacts. Board-to-cable, in-line and board-to-board connector types are also available, enhancing board design flexibility.
  · Choose from gold or tin plating to match application. SMT-compatible products are also available.
  · Accommodates 22 AWG to 30 AWG wires even with a compact 2‑mm double-row design.
  · Reduce man-hours and eliminate manual work processes for easy wiring by using a fully-automatic IDC machine, even for tedious multi-harnessing (branch wire connections).
  [Applications]
  · For all types of OA equipment, including copy machines and printers.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.14 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  D-Sub Connector (Straight Circuit Board Mounting Type), SD Series

  HIROSE ELECTRONIC

  A straight circuit board mounting type D-sub connector. Usable with each type of D-sub connector.
  
  [Features]
  · Has a metal shell and so has a small and lightweight connector.
  · The terminal contact portion is gold-plated, the circuit board mounting side is gold flash/tin-plated, and it excels at effectively reducing metal.
  · Affixed perpendicularly on a printed circuit board for high-density mounting, and highly useful for connecting to cable plugs.
  · With dip soldering (HD type), crimping (CD type), and ribbon pressure connecting (FD type), this product can be used with a variety of models.
  · The insulation material is heat resistant and uses the excellent PBT resin (UL94V-0)containing glass.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	3.11 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  D Terminal Connector DX*LM Series

  HIROSE ELECTRONIC

  The D terminal connector is for digital broadcast devices.
  
  [Features]
  ・Compatible with 3 mm panel thickness: by pushing in the mating portion 1.5 mm, it is compatible with 3 mm housing panel thickness.
  ・All possible measures against static electricity: through independent construction, the order of metallic shell to lock piece circuit board ensures that static is grounded out.
  ・Temporary circuit board fixing mechanism: a hood-shaped boss is installed on the lower connector portion and designed to fall forward when mounted on the circuit board to prevent wobbling.
  ・Enhanced circuit board fixing power: by soldering the enlarged lock piece, lead portion circuit board fixation is widely improved.
  ・A sufficiently wide safety margin is taken to prevent damage in the case that mishandling or unexpected force is applied.
  ・Conforms to EIAJ standard RC-5237: conforms to D terminal connector requirements for digital broadcast video and image signal connections.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	1.07 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  MX34 Series

  JAPAN AVIATION ELECTRONICS(JAE)

  These are non-waterproof, small-type board-to-cable connectors developed mainly for on-board use.
  
  [Features]
  ・A small-type/high density connector with abundant variations.
  A small-type/high density connector with 2.2 mm (8 turns = 4 mm) contact pitch and 025 tab size.
  ・Single-row / two-row types are available supporting 3–40 pins.
  ・Furthermore, in addition to the through-hole type, circuit board pin connector, the SMT type (straight, 20/32 pins) is also available. This type is compatible with automatic mounting, allowing for a variety of connection formats.
  ・Reliable mating due to mechanical locking structure.
  ・The mechanical locking structure is resistant to vibration and pulling. Simply inserting the plug creates a clicking sound that ensures the lock is secured. This allows users to confirm proper mating even when visibility is restricted.
  ・Double-layered stop construction to prevent contact removal.
  ・Preserving the contact inside the housing involves a double-layer construction consisting of a primary stopping housing lance and a secondary, internal preset, socket housing retainer. This effectively prevents disconnection through vibrations and pulling.
  ・ Furthermore, the retainer is constructed so that its locking position cannot be set if the contact is not fully inserted. This allows for the detection of semi-inserted contacts.
  ・The socket lock is protected by a unique housing structure.
  ・A bridge is installed around the upper portion of the clock lever in the socket housing. This prevents warping and other lock lever damage when an external load is applied when cable harnesses are bundled together.
  ・High-reliability socket contact
  ・The contact is a box-style unit that is resistant to the effect of external power fluctuations, etc.
  ・The contacts have a double layer coil construction and are strongly resistant against prying. This is a highly reliable model that ensures a stable connection.
  · Crimped type for easy wire connection.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	2.49 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  HKP Series

  HONDA TSUSHIN KOGYO

  2.54 mm pitch, straight, right angle through hole type connector.
  
  [Features]
  · Based on our original design, the contacts have provide highly reliable contact.
  · A wide range of connection combinations are possible from single circuit connections to multi-circuit connections.
  · Wire connection work is performed using a crimping machine that can perform wire connections for 3, 000 terminals/H and a hand tool for small lots is also available.
  · A UL-certified product is used as an insulator.
  · Reworking wiring mistakes is also simplified using the removal tool.
  ▪ Mating with FFC, MFC, HSC, DIC series is supported

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	2.32 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Board-to-Cable Connector (1.25-mm Pitch, Low Profile) - DF14 Series

  HIROSE ELECTRONIC

  Connector for board-to-cable connection with 1.25-mm pitch. A low-profile type with a lower circuit board mounting height.
  
  [Features]
  · Thin type.
  · A dedicated right-angle connector to achieve a low-profile on top of circuit boards.
  · Circuit board mounting height: 2.5 mm.
  · This makes it possible to draw signals from places where there is no space between the circuit boards.
  · In addition, the profile of the offset type is lower than the board mounting height of 1.6 mm.
  · Supports automatic mounting.
  · The header has a vacuum absorption surface. Therefore, automatic mounting by embossed packing is possible.
  · Additionally, magazine packing is also available for the on-board type.
  · Four-walled type prevents socket from scraping the circuit board.
  · Header includes a box structure to prevent twisting to ensure incorrect insertion is completely prevented. Circuit board also includes walls to prevent damage caused by scraping when performing insertion and removal from the socket.
  · Additionally, a reinforcement bracket is included to prevent solder from peeling.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.58 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Two-Piece Connector with 1.27-mm Pitch, HIF6 Series

  HIROSE ELECTRONIC

  Board-to-board and board-to-cable connection variations available. Uses a flat-type cable with 1.27-mm pitch, so it can be used with each type of connector.
  
  [Features]
  ・Product variation: connection methods include board-to-board model and cable pressure connection.
  ・Wide range of use: using flat-type cable with 1.27-mm pitch, it can be used with HIF2E, HIF3B, HIF5, etc.
  ・Compatible cables: AWG#28 flat cable (7/0.127 mm, outer diameter 0.8 - 1.0 mm).
  ・Construction that prevents mis-insertion: mis-insertion prevention guide prevents accidental insertion.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	1.65 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  1.78-mm Pitch Square Interface Connector, QM Series

  HIROSE ELECTRONIC

  Terminal opening and connection portion both possess a 1.78-mm pitch grid array, small size, and high density. Terminals are constructed with a ribbon shape, making them strong against prying and ensured for 1,000 insertions and extractions.
  
  [Features]
  · Terminal opening and connection portion both possess a 1.78-mm pitch grid array for use with small electric devices.
  · Terminals are constructed with a ribbon shape, making them strong against prying and ensured frequent insertions and extractions.
  · Able to be press welded when bunched with 0.89-mm (.35°) pitch cable (No.30 AWG) in an attempt to reduce work effort.
  · The dip connector, along with a construction that allows the grounding of electrical interference waves arising from the cable and connector on the circuit board surface, includes a circuit board snap stop.
  · The cover case is made of a die cast zinc amalgam effective in blocking electromagnetic waves, and a receptacle side bracket is included for effective noise reduction.
  · There are two types of cover case: hood type and lock (bevel opening) type. The lock type allows for single-action operation.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	8.84 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Box Type Pin Header with 2.54-mm Pitch, HIF3F Series

  HIROSE ELECTRONIC

  This box type pin header is constructed to prevent reverse insertion. Able to be mated with HIF3B series sockets.
  
  [Features]
  ▪ Reverse insertion prevention: pin header equipped with a HIF3E series connector portion protector wall to prevent reverse insertion.
  ▪ Compatibility: pin header compatible with HIF3B series.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	1.08 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Low Profile Connector with 2.54-mm Pitch, HIF3FC Series

  HIROSE ELECTRONIC

  A 2.54-mm pitch RoPro file board-to-board (stacking or perpendicular) and board-to-cable connector.
  
  [Features]
  ・Prevents flux oozing: HIF3FC series straight type connectors have methods in place to prevent flux oozing.
  ・Low profile: pin heads are at a low height of 9.2 mm.
  ・The space between circuit boards when stacking is 12.2 mm.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	1.01 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Board-to-Cable Connector with 2.5-mm Pitch Side Lock, HNC Series

  HIROSE ELECTRONIC

  A connector for 2.5-mm pitch discrete wire connections. Thin type for right-angle mounting at a height of 4.8 mm. Includes mechanism for total locking and mis-insertion prevention.
  
  [Features]
  ・Including total lock mechanism: total lock mechanism refers to the process of first releasing the lock on both sides before being able to remove the connector. This is effective in preventing accidental disconnection due cable pulling and other mistakes.
  ・Thin type: mount height when used at a right angle: 4.8 mm.
  ・Construction that prevents mis-insertion: Mis-insertion is prevented by the thin-type mechanism.
  ・Tin and gold plating variations: With the 2 options of tin and gold, the ideal metal may be selected depending on intended use.
  ・Further, there are settings available to provide a light feel even if tin plating is used.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.12 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Discrete Wire for Connection, DF1E Series (2.5 mm Pitch)【100 Pieces Per Package】

  HIROSE ELECTRONIC

  A board-to-cable, cable-to-cable connector with a lock (2.5-mm pitch). The inner locking type mechanism prevents the connector from disconnecting due to impact.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	28.35 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Discrete Wire Connector for Connection, DF1B Series (2.5 mm Pitch)【1-100 Pieces Per Package】

  HIROSE ELECTRONIC

  [Features]
  · A new type of connector in which IDC terminals are inserted into the case.
  · By using both crimp terminals and IDC terminals, wires with different current capacities can be used in the same case.
  · Terminals can be replaced after connection, providing excellent maintainability.
  · IDC part is protected by the case to provide a high level of reliability.
  · No need for an expensive IDC machine as IDC work can be performed by simply replacing the applicator on a conventional crimping machine.
  · High-profile headers are also available for supporting board potting (filling with resin) performed as a waterproofing measure.
  · Single-row and double-row contact configurations with standard tin or gold plating for each of the “board-to-cable” and “in-line” series products.
  [Applications]
  · Convenient for various types of wiring.
  · For all types of OA equipment, including copy machines and printers.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.09 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Board-in Board-to-Cable Connector with 2-mm Pitch, DF4 Series

  HIROSE ELECTRONIC

  Connector for direct board-to-cable connection with 2-mm pitch. By directly attaching the terminal insertion socket into the circuit board, the header cost can be minimized.
  
  [Features]
  ・Minimizes header cost: using a dual insertion-removal socket and directly attached connector terminal harness, both circuit boards can have their separate functions used as-is, reducing the required number of headers for a dual terminal socket harness from 2 to 1.
  ・Small type/multi-pin: a wide range of small types with a number of pins.
  ・Circuit board mounting height: 4.3 mm (1 crimp attachment array), maximum pin number: 32 (2 crimp attachment arrays).
  ・Temporary circuit board fastening mechanism: Connector can be temporarily affixed to the circuit board in order to make insertion easier.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.04 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Board-to-Cable Connector DF33 Series for 3.3-mm Pitch Internal Power Supply

  HIROSE ELECTRONIC

  It is compact and also supports up to 5 A. With its locking mechanism, mis-connection prevention structure, potting compatibility and high reliability, it is optimal for internal power supply connection in equipment.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.15 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Board-to-Cable Connector for Internal Power Supply with 3.5-mm Pitch - MDF6 Series【100 Pieces Per Package】

  HIROSE ELECTRONIC

  Connector for board-to-cable connection with 3.5mm pitch. Although compact in size, this connector supports 7 maximum amperes, and its inner-lock construction provides a highly reliable connection, ideal for internal power supplies.
  
  [Features]
  · Compact type with 3.5mm pitch: A small-size, space-saving power supply connector, with pitch between adjacent contacts set at 3.5 mm, and arranged in a double-row pattern with 5 mm between opposing sides.
  · 7A current rating ensured: Despite the compact size of the power supply, 7A current rating is ensured with use of AWG #16 wires (UL/CSA rating is 6A). Box-style header: Twist-resistant due to its box-style construction, enabling complete prevention of insertion errors.
  · Equipped with inner-type full lock: An inner-type full lock with a locking section that is not exposed to the outside ensures secure engagement for a high level of safety.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	31.61 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Connector for Ribbon Cable, Compatible with 3A, HIF4 Series

  HIROSE ELECTRONIC

  Current volume is now 3 A rather than the 1 A of conventional ribbon cable connectors (HIF3B, etc.), offering a wider range of use.
  
  [Features]
  · Current volume is now 3 A rather than the 1 A of conventional ribbon cable connectors such as HIF3B, offering a wider range of use.
  · With an automatic lock mechanism, exceptional reliability in the face of vibrational impact is ensured.
  · With an automatic extraction lever with lock release, an extraction tool is not required.
  · Compatible lines include the (UL2651) No. 24 AWG flat cable (7 wires/0.203 mm, external cover diameter of 1.0–1.2 mm).

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	3.65 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  D-Sub Connector (Right-Angle Board-Mounted Type), RD*D Series

  HIROSE ELECTRONIC

  These D-sub connectors are right-angle board-mounted types. Their lock mechanisms are selectable, and they can be combined with any type of D-sub plug.
  
  [Features]
  · Has a metal shell and so has a small and lightweight connector.
  • They are integrated with RD-type molds and are of simple construction.
  • They install directly in parallel to the PCB and mount at high density, making connection to cable plugs extremely convenient.
  • The connection and the board mounting areas are metal plated.
  • Enables a variety of assembly techniques, including dip soldering (HD type), crimping (CD type), and ribbon pressure contact (FD type).
  • A UL synthetic resin that is heat and chemical resistant, and is used as the insulating material.
  • Various accessories can be employed to allow these connectors to be used in different applications.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	3.84 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  DeviceNet-Compliant Connector, HR31 Series

  HIROSE ELECTRONIC

  These are DeviceNet standard compliant connectors. These connectors simplify connection, reduce plug connector size, and promote differentiation compared to conventional parts.
  
  [Features]
  · DeviceNet compliant: The HR31 series is a FA network device standards product. (Terminal contacts: Gold-plated)
  · Screw-lock: All screw-lock equipped products can be securely locked, allowing for increased locking strength.
  · Snap-lock: The snap-lock feature creates a tactile click when mating.
  · Commercially available tools can be used: These connectors are designed to be used with crimp tools conforming to JIS C 9711 standards.
  · Designed to allow for removal by ⌀1 mm pin when improperly wired.
  · Protected contacts: The crimped contacts are protected by the plug housing, reducing damage to the contacts during connection.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	2.82 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Half-Pitch Multifunction Two-Piece Connector FX2 Series

  HIROSE ELECTRONIC

  Combination offers various connections for board-to-board (stacking, horizontal, vertical) and ribbon cable connections.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	1.06 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Half-Pitch I / O Connector (Original Type) DX Series

  HIROSE ELECTRONIC

  I/O Connector with a 1.27-mm pitch (Hirose Electric Original Type). A selection of two types of lock methods and abundant variations for wire connection and implementation methods are available.
  
  

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	5.93 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Half-Pitch I / O Connector (General Purpose Type) DX*M Series

  HIROSE ELECTRONIC

  This is a 1.27-mm pitch I/O connector (general purpose type). A wide variety is available to suit different applications.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	2.29 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Board-to-Cable Connector MDF51 Series for A High Voltage Resistance (3000 V) Circuit Board with Lock Included

  HIROSE ELECTRONIC

  This is a board-to-cable connector for a circuit board with high voltage resistance that corresponds to 3,000 V and has a lock included. One-push connection operation is available for improved mating operability.
  
  [Features]
  • Connector mating in just one push: Through the utilization of an inertia lock, mating work can be performed easily and with certainty in just one push.
  • This also prevents accidents resulting from partial mating.
  • Improved workability through vertical mating: Vertical mating and horizontal cable pulling improve workability in the field. drawer allows improved working in the field.
  • Also, the mating surface has a large guiding area to make insert operations easier to perform.
  • Designed with high voltage in mind: In addition to the terminal pitch, the design accumulates a large side surface distance, retaining performance in a high voltage environment.
  • Header connector uplift prevention: Through solder connections to a total of 4 areas, the header side housing is fixed firmly in place, preventing and uplift from occurring.
  • Solder implementation for uplift prevention: As a solder implementation method for preventing uplift, a kink structure is included in the terminals (P = 12 mm products only).
  • UL, C-UL, and TUV certified products: Those products have obtained safety standard qualifications as connectors (P = 12 mm products only).

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	0.23 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  IL-AG6 Series

  JAPAN AVIATION ELECTRONICS(JAE)

  This is a pin connector for reliable connection to the circuit board, formed to the terminal as a measure to prevent solder joint cracking.
  
  [Features]
  ・A pin header for prevention of solder joint cracking.
  ・A straight-type pin header for mounting to circuit boards. Prevents solder cracking that occurs due to extreme changes in temperature, board and insulator expansion coefficient, and vibration.
  ・This type is formed to a section of the terminal mounted to the circuit board for alleviating stress on the soldered section.
  ・ Mating sockets: IL-AG5 Series
  ・ IL-AG5 Series sockets with crimped wire connections are used for the mating socket connectors.
  ・ Comes with welded legs for securing the circuit board.
  ・ Equipped with protrusions (legs) for holding the circuit board in place.
  ・ Ultrasonic welding provides greater rigidity for securing the circuit board.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	3.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  RA1 Series

  JAPAN AVIATION ELECTRONICS(JAE)

  This composite connector includes ten pins (signal) and one pin (coaxial). The connector complies with the EIAJ RC-5238 "IMT-2000 Mobile Phone Connector A" standard.
  
  [Features]
  · A composite connector with ten pins (signal) and one pin (coaxial). Complies with the EIAJ RC-5238 "IMT-2000 Mobile Phone Connector A" standard.
  · This connector is smaller when compared to those used in digital mobile phones (DH series) (signal C/T pitch 0.5 mm, volume ratio: receptacle 1/3, plug 1/2).
  · Connectors used for transmitting signals prevent static electricity-induced and electromagnetic interference by using a metal shell.
  · Full cover gel is used for the fitting element. The structure prevents opening both in the plug receptacle and in the shell alignment fixture.
  · The receptacle's signal contact line can be shifted to support insertion and extraction of a live wire (sequence).
  · Signal contact supports high-speed transmission (and supports USB 1.1).
  · Coaxial contact supports an operating frequency range of up to 2.2 GHz.
  · Receptacle supports embossed taping by maintaining a 6 mm by 6 mm adherence area.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	4.17 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  DN Connector for Small, Low-Profile Type Interface

  HIROSE ELECTRONIC

  This small, multi-pin rectangular connector was developed to support the miniaturization of electronic devices, and thinner devices in particular
  
  [Features]
  · The terminal's wire connector is arrayed in a 2.54 mm grid that makes it easy to design circuits on a printed circuit board.
  · The structure of the terminal is based on the manufacturer's SM series (D-sub connectors). This gives the terminal dependable quality.
  · The single-action lock mechanism provides excellent operability.
  · The cover case is designed to be thin and compact and features a low profile in order to meet the needs of high-density mounting. Mounting with 17.78 mm (700 mils) between circuit boards is possible.
  · The cover case is made of an aluminum die casting offering good electromagnetic shielding characteristics. Combined with the connector's metal shell, the above configuration ensures that noise is reduced.
  · The dip connector includes a snap (circuit board temporary joint) bracket.
  · Pressure Connecting type supports connection of two wire types, AWG 26 and 28, via pressure welding, for use with standard 1.27-mm pitch cables.
  · Crimping type can be used to perform crimping of AWG 26 to 28 wiring.
  · Depending on the application, cable can be extracted in either the vertical or horizontal direction.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	6.30 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  D-Sub Connectors - XM2 / XM3

  OMRON

  [Features]
  ・ These are D-sub connectors that are ideal for OA equipment interfaces.
  ・ These are shielded connectors for EMI countermeasures.
  ・ Effective measures to counter noise have been realized through the use of a plastic hood (XM2S) which has undergone metallization processing.
  ・ The multi-hole ferrite core installation type (XM3B-F) is now available as a series also.
  ・ It is good as a countermeasure for noise in the high-frequency regions, and also allows for space savings on the circuit board.
  ・ A compact, sturdy type with a metal shell.
  ・ Various fasteners and ground conductor fittings are available.
  ▪ UL standard (File No.E103202) certified products are used as standard (except for XM2S and some products).

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	4.11 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  D-Sub Connectors XM3-L / XM2-L / XM4K / XM4L

  OMRON

  [Features]
  ・ This D-sub connector series has been renewed with lead-free compatible products.
  ・ The fastening screw diameter can be identified from its external appearance.
  ・ A solution to problems associated with combining fasteners has been found.
  ・ Shielded connectors for EMI countermeasures.
  ▪ This is a UL standard (File No.E103202) certified product (except for XM4Z type).

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	5.24 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  USB Connector Type Mini‑B Receptacle (Through-Hole)

  MOLEX

  An industry standard USB connector, providing connection for power and exchanging data across a wide range of industries without having to use a host PC

  Select to compare

  › Configure now
  Starting from∗ ：	3.66 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Economy power (EP) connector series, rectangular power connector

  TE CONNECTIVITY

  Single-column array compact connector with contact center spacing of 3.96 mm and 7.92 mm pitch, developed for compatibility with all kinds of equipment, such as secondary power supply wiring for circuit board connection.

  Select to compare

  › Configure now
  Starting from∗ ：	0.07 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...