- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 3:00 21/4/2024 to 0:00 (CET) 22/4/2024. We apologize for the inconvenience.
Metal Tube Options
?* Information on days to ship and prices
-
Metal Cable Gland (Straight)
MISUMI
Metal conduit connector for FAG / FSV / FTUB / FSN series only (straight model).
Parallel pipe screw (PF screw) specification- Volume Discount
- IP67
› Configure nowStarting from∗ ： 8.25 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Metal Conduit Saddle (1 piece Fixed)
MISUMI
A saddle clamp with adjuster that can be used for a variety of pipes, hoses, cylindrical rods, etc. with different outside diameters, as well as for various conduits.- Volume Discount
› Configure nowStarting from∗ ： 3.14 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Flexible Model Tube Connector for KSN (Cylindrical Short Head)
MISUMI
Dedicated connector for the KSN series. Terminal protection cap ideal for burr protection of the metal tube cut end- Volume Discount
› Configure nowStarting from∗ ： 3.30 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Metal Conduit Saddle (2 - 3 piece Fixed)
MISUMI
A metal protective sleeve saddle clamp for holding 2 or 3 pipes side by side.- Volume Discount
› Configure nowStarting from∗ ： 4.07 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Bushings (insulation type)【1-20 Pieces Per Package】
SANKEI MANUFACTURING
[Features]
・These bushings are attached to the ends of plica tubes to prevent damage to the coating of wires.
・Insulation type.
・Screw method tubing connection for the plica tube.- Volume Discount
› Configure nowStarting from∗ ： 2.49 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Piluck (for Use with Standard Formed Steel)【1-20 Pieces Per Package】
NEGUROSU DENKO
Pipe supports for general steel beams that can be fitted at any angle at 2 points on the back and on the floor.- Volume Discount
› Configure nowStarting from∗ ： 12.78 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Flexible Model Tube Connector for KSN (Screw-model Head)
MISUMI
Dedicated connector for the KSN series. M screw standard products can be mounted, since M screw tap is cut off from the connector tip- Volume Discount
› Configure nowStarting from∗ ： 4.99 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Flexible Fixed Model Tube Connector for ISN (Screw-model Head)
MISUMI
One long screw connector made of brass with nickel-plated surface.- Volume Discount
› Configure nowStarting from∗ ： 4.83 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
KSN / ISN Combined Connector (Terminal Protection Cap)
MISUMI
A terminal protection cap for KSN / ISN only. Please use for the burr protection of the tube- Volume Discount
› Configure nowStarting from∗ ： 2.61 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Metal Conduit Connector (45° Angle)
MISUMI
Metal conduit connector for FAG / FSV / FTUB / FSN series only (45°angle model).
Space-saving wiring is possible since the connector is bent at 45 degrees.- Volume Discount
› Configure nowStarting from∗ ： 13.03 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Metal Conduit Connector (90° Angle)
MISUMI
Metal conduit connector for FAG / FSV / FTUB / FSN series only (angle model).
Parallel pipe screw (PF screw) specification.
Space-saving wiring is possible since the connector is bent at 90 degrees.- Volume Discount
- IP67
› Configure nowStarting from∗ ： 10.35 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Metal Conduit Connector (Straight / PG Screw)
MISUMI
Metal conduit connector for FAG / FSV / FTUB / FSN series only (HAN connector connection model).
PG screw specification. Please use when connecting the Han connector from Harding, Inc. to the metal tube- Volume Discount
› Configure nowStarting from∗ ： 15.73 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Metal Conduit Terminal Protection Cap
MISUMI
Terminal cap for FAG / FSV / FTUB / FSN series only.
Please use when protecting the terminal of the metal tube. Can be easily connected with a lock nut.
A round terminal contact is also possible.- Volume Discount
› Configure nowStarting from∗ ： 4.94 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Metal Conduit Saddle (One Side Fixed)
MISUMI
A metal protective sleeve saddle clamp, which is a pipe fixing part with a fixing hole on one side.- Volume Discount
› Configure nowStarting from∗ ： 0.91 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Connector for Knockout Use (includes a male screw for a thin steel electrical conduit)【1-10 Pieces Per Package】
SANKEI MANUFACTURING
[Features]
· Non union type connector for connecting the plica tube to knockouts in boxes.
· With screw for thin steel wiring tube.- Volume Discount
› Configure nowStarting from∗ ： 1.37 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Piluck (Fitting for Supporting Pipes in Standard Formed Steel)【20 Pieces Per Package】
NEGUROSU DENKO
Can hold a cable conduit at any angle on the back and bottom. In combination with the W3-FN, the suspension bolt W3/8 can be suspended vertically.- Volume Discount
› Configure nowStarting from∗ ： 23.25 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Panel Connector
HAGI
[Features]
- Connects sensors from assorted manufacturers to fiber protectors.
- Head connector connects to the sensor head.
[Use]
- Used for pull-out parts of measuring instruments, sensor devices, robots, and amusement devices as a sensor-protecting tube terminal connector.- Volume Discount
› Configure nowStarting from∗ ： 6.69 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Clip (Screw Type)
MIRAI INDUSTRY
[Features]
Combine this with a shaped steel bracket for securing a conduit pipe, etc., to a steel material.- Volume Discount
› Configure nowStarting from∗ ： 1.70 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Duct Nobasu Pipe Stretcher
MIRAI INDUSTRY
[Features]
· Tool that can stretch an aluminum-free duct by deforming its cross-section into a clean oval shape with ease.
· Because the cross-section is formed into an oval shape, installation in a small space is easy.- Volume Discount
› Configure nowStarting from∗ ： 92.13 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 9.57 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Flexible Model Tube Connector for KSN (Head for Panel Mounting)
MISUMI
Dedicated connector for the KSN series. Can be mounted to panel / box board, etc. (lock nut included)- Volume Discount
› Configure nowStarting from∗ ： 4.25 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Flexible Model Tube Connector for KSN (Cylindrical Long Head)
MISUMI
Screw connector with head for flexible tubes KSN Compatible tube is KSN2.5 to 8- Volume Discount
› Configure nowStarting from∗ ： 4.53 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Flexible Fixed Model Tube Connector for ISN (Cylindrical Head)
MISUMI
A cylindrical long connector made of brass with a nickel-plated finish.- Volume Discount
› Configure nowStarting from∗ ： 3.65 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Flexible Fixed Model Tube Connector for ISN (Head for Panel Mounting)
MISUMI
A connector for panel mounting, made of brass with nickel-plated surface.- Volume Discount
› Configure nowStarting from∗ ： 5.21 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Metal Conduit Connector (For MS Connector)
MISUMI
Metal conduit connector for FAG / FSV / FTUB / FSN series only (MS connector connection model).
American unified screw specification.
Please use when connecting MS connector to the metal tube- Volume Discount
› Configure nowStarting from∗ ： 14.13 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Metal Conduit Connector (For MS Drip-Proof Connector)
MISUMI
A fitting for connecting the non-drip MS fittings MS3106 A and MS3108 A to pipelines. Complies with IP67 degree of protection.- Volume Discount
› Configure nowStarting from∗ ： 25.89 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Metal Conduit Ground Ring
MISUMI
Ground ring for FAG / FSV / FTUB / FSN series only.
Please use in areas where there is a risk of the power cable tube and the box becoming electrically and mechanically defective.
It can be easily connected with a lock nut.- Volume Discount
› Configure nowStarting from∗ ： 5.87 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
90° connector (with conduit use parallel screws)【1-20 Pieces Per Package】
SANKEI MANUFACTURING
[Features]
· A 90° type connector with connection to knockout of K-Flex control panel.
· With pipe inline male threads.- Volume Discount
› Configure nowStarting from∗ ： 6.92 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Connector (includes parallel male screws)【1-20 Pieces Per Package】
SANKEI MANUFACTURING
[Features]
This connector joins a Keiflex conduit to the knockout point on the control panel. Includes parallel male screws.
*Please be aware there was a mistake in the 2015 wiring parts catalog. [KMBG28] The notation “per item” refers to products sold in packs which contain multiple units per pack, and does not indicate items sold individually. We apologize for any inconvenience this may have caused.- Volume Discount
› Configure nowStarting from∗ ： 4.21 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Combination coupling (K-Flex + thick steel / thin steel wire tube)
SANKEI MANUFACTURING
[Features]
· Threaded combination coupling for connecting K-flex and steel wire tubing.- Volume Discount
› Configure nowStarting from∗ ： 5.80 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Combination Coupling (for use with a Keiflex and a steel electrical conduit or thick steel electrical conduit)【1-5 Pieces Per Package】
SANKEI MANUFACTURING
[Features]
· Diecast combination coupling for connecting a Keiflex tube and a steel electrical conduit.
· For use with thick steel electrical conduits.- Volume Discount
› Configure nowStarting from∗ ： 4.53 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Keiflex Accessory, Combination Coupling (Thick Wall Steel Conduit Connection Type)【2-20 Pieces Per Package】
SANKEI MANUFACTURING
[Features]
· Threaded combination coupling for connecting the plica tube and steel conduit.
・Suitable for connections for thick steel electrical conduits.
・The plica tube and steel electrical conduit connections are both screw connections.- Volume Discount
› Configure nowStarting from∗ ： 21.85 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Keiflex Accessory, Combination Coupling (Thin Wall Steel Conduit Connection Type)【10-20 Pieces Per Package】
SANKEI MANUFACTURING
[Features]
· Threaded combination coupling for connecting the plica tube and steel conduit.
・Suitable for connections for thin steel electrical conduits.- Volume Discount
› Configure nowStarting from∗ ： 18.33 € Min. Shipping Days ： 10 Days *Unit price with basic configuration
-
Sunflake-ROBO knockout connection use connector (standard)【1-20 Pieces Per Package】
SANKEI MANUFACTURING
[Features]
· Connector for connecting Sunflake ROBO to control panel knockout.
· With pipe inline male threads. Standard.
· Tensile strength of connector with Sunflake ROBO #16-#63 is 250N (JIS light).- Volume Discount
› Configure nowStarting from∗ ： 3.86 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Combination Screw Coupling (for use with a standard plica and a steel electrical conduit without screws)
SANKEI MANUFACTURING
[Features]
• Combination coupling for connecting a plica tube and steel electrical conduit without screws.
• The plica tube connection is a screw connection, and the steel electrical conduit connection is fixed in place with small screws.
• The tensile strength of the plica tube and couplings is 500 N (JIS medium).
• The tensile strength of the coupling with the electrical conduit is 500 N for model numbers 10–30 (JIS medium), and 1, 000 N for model numbers 38 and above (JIS heavy).- Volume Discount
› Configure nowStarting from∗ ： 1.63 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Knock-out use connector (With thick steel wire conduit tube thread)【1-20 Pieces Per Package】
SANKEI MANUFACTURING
[Features]
· Non union type connector for connecting the plica tube to knockouts in boxes.
· With screw for thick steel conduit.
· The tensile strength of the plica tube and couplings is 500N (JIS medium).- Volume Discount
› Configure nowStarting from∗ ： 3.17 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Connector for Knockout Use (Cap Nut-Type)【1-10 Pieces Per Package】
SANKEI MANUFACTURING
[Features]
• A connector for connecting plica tubes to knockouts in boxes.
• Includes either a "male screw for thick steel electrical wiring tubes" or a "male screw for thin steel electrical wiring tubes."- Volume Discount
› Configure nowStarting from∗ ： 3.86 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Ferrules【1-50 Pieces Per Package】
SANKEI MANUFACTURING
[Features]
・These products are steel ferrules for protecting the pipe ends of Keiflex units.- Volume Discount
› Configure nowStarting from∗ ： 3.85 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
› Configure now
Starting from∗ ： 14.17 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Meal Connector (includes a male screw for a thin steel electrical conduit)【1-20 Pieces Per Package】
SANKEI MANUFACTURING
[Features]
・This is a connector for connecting the Keiflex to the knockout point on the control panel.
· With screw for thin steel wiring tube.- Volume Discount
› Configure nowStarting from∗ ： 4.53 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Connector for Keiflex KM Type Accessory Knockout Connection (Parallel Pipe Thread Male Thread Type)【5-20 Pieces Per Package】
SANKEI MANUFACTURING
[Features]
・This is a plastic connector for connecting the Keiflex to the knockout point on the control panel.
· Equipped with tube inline male threads.- Volume Discount
› Configure nowStarting from∗ ： 56.12 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Waterproof combination coupling (waterproof pre-coupling + screwless steel wire conduit)
SANKEI MANUFACTURING
[Features]
· Combination coupling thanks to connection of waterproof pre-coupling and screwless conduit.
· Union method for connecting the plica tube.
· The tensile strength of the plica tube and couplings is 500N (JIS medium).
· The tensile strength of the electrical wire conduit and coupling for #15-30 is 500N (JIS medium), and 1000N for 38 and over (JIS heavy).- Volume Discount
› Configure nowStarting from∗ ： 4.89 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Waterproof combination coupling (waterproof pre-coupling + threaded steel wire conduit)【1-20 Pieces Per Package】
SANKEI MANUFACTURING
[Features]
· Combination coupling thanks to connection of waterproof pre-coupling and steel conduit.
· Union method for connecting the plica tube.
· Threaded screw connection of the steel wire conduit.
· The tensile strength of the plica tube and couplings is 500N (JIS medium).- Volume Discount
› Configure nowStarting from∗ ： 3.10 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Ductor Clip (DC)【10 Pieces Per Package】
NEGUROSU DENKO
The edge of the clip is filed off to prevent damage to the cable covering (hot-dip zinc galvanized steel plate).- Volume Discount
› Configure nowStarting from∗ ： 12.36 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Duct Clip (S-DC)【10 Pieces Per Package】
NEGUROSU DENKO
[Features]
• The edge of the clip has been cut to prevent damaging the cable covering (stainless steel (SUS)).- Volume Discount
› Configure nowStarting from∗ ： 32.04 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Type |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | SANKEI MANUFACTURING | NEGUROSU DENKO | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | SANKEI MANUFACTURING | NEGUROSU DENKO | HAGI | MIRAI INDUSTRY | MIRAI INDUSTRY | PREVOST | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | SANKEI MANUFACTURING | SANKEI MANUFACTURING | SANKEI MANUFACTURING | SANKEI MANUFACTURING | SANKEI MANUFACTURING | SANKEI MANUFACTURING | SANKEI MANUFACTURING | SANKEI MANUFACTURING | SANKEI MANUFACTURING | SANKEI MANUFACTURING | SANKEI MANUFACTURING | SANKEI MANUFACTURING | SANKEI MANUFACTURING | SANKEI MANUFACTURING | SANKEI MANUFACTURING | SANKEI MANUFACTURING | NEGUROSU DENKO | NEGUROSU DENKO |
| Product Series | Flexible Model Tube Connector for KSN (Cylindrical Short Head) | Piluck (for Use with Standard Formed Steel)【1-20 Pieces Per Package】 | Flexible Fixed Model Tube Connector for ISN (Screw-model Head) | Piluck (Fitting for Supporting Pipes in Standard Formed Steel)【20 Pieces Per Package】 | Flexible Model Tube Connector for KSN (Head for Panel Mounting) | Flexible Model Tube Connector for KSN (Cylindrical Long Head) | Flexible Fixed Model Tube Connector for ISN (Cylindrical Head) | Flexible Fixed Model Tube Connector for ISN (Head for Panel Mounting) | 90° connector (with conduit use parallel screws)【1-20 Pieces Per Package】 | Connector (includes parallel male screws)【1-20 Pieces Per Package】 | Combination coupling (K-Flex + thick steel / thin steel wire tube) | Sunflake-ROBO knockout connection use connector (standard)【1-20 Pieces Per Package】 | Knock-out use connector (With thick steel wire conduit tube thread)【1-20 Pieces Per Package】 | Connector for Knockout Use (Cap Nut-Type)【1-10 Pieces Per Package】 | Meal Connector (includes a male screw for a thin steel electrical conduit)【1-20 Pieces Per Package】 | Waterproof combination coupling (waterproof pre-coupling + screwless steel wire conduit) | |||||||||||||||||||||||||||||
| Starting from∗ | 8.25 € *Unit price with basic configuration Volume Discount | 3.14 € *Unit price with basic configuration Volume Discount | 3.30 € *Unit price with basic configuration Volume Discount | 4.07 € *Unit price with basic configuration Volume Discount | 2.49 € *Unit price with basic configuration Volume Discount | 12.78 € *Unit price with basic configuration Volume Discount | 4.99 € *Unit price with basic configuration Volume Discount | 4.83 € *Unit price with basic configuration Volume Discount | 2.61 € *Unit price with basic configuration Volume Discount | 13.03 € *Unit price with basic configuration Volume Discount | 10.35 € *Unit price with basic configuration Volume Discount | 15.73 € *Unit price with basic configuration Volume Discount | 4.94 € *Unit price with basic configuration Volume Discount | 0.91 € *Unit price with basic configuration Volume Discount | 1.37 € *Unit price with basic configuration Volume Discount | 23.25 € *Unit price with basic configuration Volume Discount | 6.69 € *Unit price with basic configuration Volume Discount | 1.70 € *Unit price with basic configuration Volume Discount | 92.13 € *Unit price with basic configuration Volume Discount | 9.57 € *Unit price with basic configuration | 4.25 € *Unit price with basic configuration Volume Discount | 4.53 € *Unit price with basic configuration Volume Discount | 3.65 € *Unit price with basic configuration Volume Discount | 5.21 € *Unit price with basic configuration Volume Discount | 14.13 € *Unit price with basic configuration Volume Discount | 25.89 € *Unit price with basic configuration Volume Discount | 5.87 € *Unit price with basic configuration Volume Discount | 6.92 € *Unit price with basic configuration Volume Discount | 4.21 € *Unit price with basic configuration Volume Discount | 5.80 € *Unit price with basic configuration Volume Discount | 4.53 € *Unit price with basic configuration Volume Discount | 21.85 € *Unit price with basic configuration Volume Discount | 18.33 € *Unit price with basic configuration Volume Discount | 3.86 € *Unit price with basic configuration Volume Discount | 1.63 € *Unit price with basic configuration Volume Discount | 3.17 € *Unit price with basic configuration Volume Discount | 3.86 € *Unit price with basic configuration Volume Discount | 3.85 € *Unit price with basic configuration Volume Discount | 14.17 € *Unit price with basic configuration Volume Discount | 4.53 € *Unit price with basic configuration Volume Discount | 56.12 € *Unit price with basic configuration Volume Discount | 4.89 € *Unit price with basic configuration Volume Discount | 3.10 € *Unit price with basic configuration Volume Discount | 12.36 € *Unit price with basic configuration Volume Discount | 32.04 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 5 Days | 5 Days | 5 Days | 5 Days | Same day | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | 6 Days | 6 Days | 7 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | Same day | 5 Days | 5 Days | 10 Days | 10 Days | 5 Days | 5 Days | 5 Days | 5 Days | Same day | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | Same day | 5 Days |
| Specifications |
|
| |||||||||||||||||||||||||||||||||||||||||||
| Type | Connector | Saddle Clamp | Connector | Saddle Clamp | Other | Other | Connector | Connector | Connector | Connector | Connector | Connector | Cap | Saddle Clamp | Connector | Other | Connector | Other | Other | - | Connector | Connector | Connector | Connector | Connector | Connector | Other | Connector | Connector | Coupling | Coupling | Coupling | Coupling | - | Coupling | Connector | Connector | Other | Other | Connector | Connector | Coupling | Coupling | Other | Other |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Type
Brand
CAD data type
-
- 2D
- 3D
Categories related to Metal Tube Options
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.