Carbide Square End Mills（work material：General Steel Page 3）
Search by sub-category
Square End Mills (Carbide)
Multi-Function Square End Mills (Carbide)
High Helical End Mills (Carbide)
Roughing End Mills (Carbide)
Long Neck Square End Mills (Carbide)
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model
MISUMI
[Features]
When machining raw material, heat-treated steel, aluminium, etc., finishing standing walls for mould bottom (main mould), etc., they show their strength thanks to the positive rake angle, sharp corners of the bottom edge and strong bevel angle of 53°
-High tool rigidity minimises tool tilt during side milling.- Volume Discount
- TS
- General Steel
- Multi-Flutes （5 ~）
- S (Short)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide roughing end mill, fine pitch / short model
MISUMI
[Features]
-Roughing cutter for rough and medium to coarse machining with fine pitch
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide roughing end mill, fine pitch / regular model
MISUMI
[Features]
Roughing cutter for rough and medium to coarse machining with fine pitch
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- R (Regular)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide roughing end mill, fine pitch / long model
MISUMI
[Features]
-Roughing cutter for rough and medium to coarse machining with fine pitch
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- 4 Flutes
- L (Long)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide roughing end mill, fine pitch / long regular model
MISUMI
[Features]
-Roughing cutter for rough and medium to coarse machining with fine pitch
-Long shank, ideal for milling deep cavities
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- R (Regular)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide roughing end mill, 45° spiral / fine pitch / short model
MISUMI
[Features]
-High-speed rotary machining is possible with 45° helix angle
-Roughing cutter for rough and medium to coarse machining with fine pitch
-The coating has high oxidation resistance and high hardness and achieves long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- S (Short)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide roughing end mill, 45° spiral / fine pitch / regular model
MISUMI
[Features]
-High-speed rotary machining is possible with 45° helix angle
-Roughing cutter for rough and medium to coarse machining with fine pitch
-The coating has high oxidation resistance and high hardness and achieves long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- R (Regular)
Configure nowMin. Shipping Days ： 5 Days -
TSC series carbide roughing end mill, 45° spiral / fine pitch / long model
MISUMI
[Features]
-High-speed rotary machining is possible by adopting 45° helix angle
-Roughing cutter for rough and medium to coarse machining with fine pitch
-The coating has high oxidation resistance and high hardness and achieves long service life. Effective in high speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
- TS
- General Steel
- L (Long)
Configure nowMin. Shipping Days ： 5 Days -
TS coated carbide roughing end mill, 45°spiral, fine pitch / long shank, regular model
MISUMI
[Features]
-High-speed rotary machining is possible by using a 45° helix angle
-Roughing cutter for rough and medium to coarse machining with fine pitch
-Long shank, ideal for milling deep cavities
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high speed machining and dry machining as coating features.- Volume Discount
- TS
- General Steel
- R (Regular)
Configure nowMin. Shipping Days ： 5 Days -
XAC series carbide high-helical end mill, for high-hardness steel machining, multi-blade, 45° torsion / regular model
MISUMI
[Features]
-Designed with a tool shape that increases rigidity for machining high hardness steels
-Since it is designed with a large rake angle, it can also be used on machines where the cutting speed is not increased
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.- Volume Discount
- TiAlN
- High-Hardness Steel
- Multi-Flutes （5 ~）
Configure nowStarting from∗ ： 40.63 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model
MISUMI
Demonstrates phenomenal performance in processing the difficult-to-cut SUS304- Volume Discount
- TS
- SUS
- 3 Flutes
- S (Short)
Configure nowStarting from∗ ： 75.33 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Regular Model
MISUMI
Ideal for the standing-wall finish of stainless steel- Volume Discount
- TS
- SUS
- 3 Flutes
- R (Regular)
Configure nowStarting from∗ ： 105.15 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC Series Carbide Roughing End Mill for Stainless Steel Machining
MISUMI
Ideal for the medium-finishing of difficult-to-cut SUS, etc.- Volume Discount
- TS
- SUS
- 3 Flutes
- R (Regular)
Configure nowStarting from∗ ： 81.46 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC Series Carbide Square End Mill for Titanium Machining, 4-Flute, 45° Spiral / Short Model
MISUMI
An end mill for titanium machining that performs medium roughing and finish machining at the same time- Volume Discount
- TS
- Titanium
- 4 Flutes
- S (Short)
Configure nowStarting from∗ ： 104.92 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Square End Mill, 2-Flute / 1.5D Flute Length (Stub) Model
MISUMI
Stub flute length items that are ideal for grooving are available at incredibly low prices- Volume Discount
- XAL
- General Steel
- 2 Flutes
Configure nowStarting from∗ ： 9.15 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Square End Mill, 2-Flute / 2, 5D Flute Length Model
MISUMI
The Misumi's unique lineup of fine flute length is available at attractive low prices- Volume Discount
- XAL
- General Steel
- 2 Flutes
Configure nowStarting from∗ ： 10.07 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) Model
MISUMI
A long flute length type that supports deep engraving- Volume Discount
- XAL
- General Steel
- 2 Flutes
Configure nowStarting from∗ ： 12.66 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Series Carbide Square End Mill, 4-Flute / 2.5D Flute Length Model
MISUMI
The Misumi's original fine intermediate flute length is available at a reasonable price- Volume Discount
- XAL
- General Steel
- 4 Flutes
Configure nowStarting from∗ ： 10.30 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
XAL Series Carbide Square End Mill, 4-Flute / 4D Flute Length (Long) Model
MISUMI
Popular sizes that support deeper side milling are available in XAL Series- Volume Discount
- XAL
- General Steel
- 4 Flutes
Configure nowStarting from∗ ： 23.56 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / short model
MISUMI
MISUMI's original "Z mill" that's thoroughly focused on the thrusting performance- Volume Discount
- TS
- General Steel
- 4 Flutes
- S (Short)
Configure nowStarting from∗ ： 42.42 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Carbide Blade Neck Relief End Mill, 2-Flute / Regular Model
MISUMI
A blade relief type that's not affected by the interference of tools- General Steel
- 2 Flutes
- R (Regular)
Configure nowMin. Shipping Days ： 7 Days -
Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill
MISUMI
[Features]
-Alteration cutter that can determine the corner chamfer size of carbide cutters in 0.1 mm steps
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices etc.- Non-Coated
- General Steel
Configure nowMin. Shipping Days ： 7 Days -
Carbide Blade Neck Relief End Mill, 4-Flute / Short Model
MISUMI
Blade relief type with a 4-flute structure- General Steel
- 4 Flutes
- S (Short)
Configure nowMin. Shipping Days ： 7 Days -
Carbide Blade Neck Relief End Mill, 4-Flute / Regular Model
MISUMI
Blade relief type with a 4-flute structure- General Steel
- 4 Flutes
- R (Regular)
Configure nowMin. Shipping Days ： 7 Days -
Carbide Square End Mill, 2-Flute / 0.01 mm Designation Model
MISUMI
The blade diameter of 0.01 mm increments can be selected from the extensive variations of flute length- Volume Discount
- Non-Coated
- General Steel
- 2 Flutes
Configure nowStarting from∗ ： 33.17 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
XCP Coated Carbide Square End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Stub / Short Type (Gash Land)
MISUMI
· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.
· Popular XCP series end mill with a shape that emphasizes blade tip rigidity- Volume Discount
Configure nowStarting from∗ ： 32.66 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XCP Coated Carbide Square End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / 2.5D / Regular Type (Gash Land)
MISUMI
· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.
· Available in MISUMI's extensive blade tip specifications- Volume Discount
Configure nowStarting from∗ ： 25.15 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XCP Coated Carbide Square End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / 45° Torsion / Short/Regular Type
MISUMI
· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.
· 45° high torsion end mill with a long contact surface between work material and blade that provides a long tool life.- Volume Discount
Configure nowStarting from∗ ： 48.45 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Coated Carbide Long Neck Square End Mill, 4-Flute / Long Neck Model
MISUMI
The price that's only achievable by XAL Series! Introducing the 4-flute long neck- Volume Discount
Configure nowStarting from∗ ： 17.35 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Regular Model
MISUMI
Introducing a regular type with 45° spiral in the popular XAL Series- Volume Discount
Configure nowStarting from∗ ： 23.86 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Long Model
MISUMI
Introducing a long type with 45° spiral in the popular XAL Series- Volume Discount
Configure nowStarting from∗ ： 29.38 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
TSC Series Carbide Uneven Lead 4-Flute Square End Mill
MISUMI
The long-awaited unequal lead 4-flute square end mill is introduced in the TSC Series (helix angle of 40° / 43°)- Volume Discount
Configure nowStarting from∗ ： 45.45 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
VAC Series Carbide 2-Flute Square End Mill (Extra-Long Model)
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered), and heat-treated steel (up to 50 HRC)
-Effective for machining deep parts due to extra-long blade length
-Ultra-fine-grained carbide base material and coating with excellent adhesion and heat resistance are used
-Can machine heat-treated steel up to 50HRC
-. Optimal for machining in low to medium rotation range due to universal 30° helix angle
-Coating with excellent lubricity provides stable abrasion resistance and improves workpiece shape accuracy (VAC coating has weak electrical conductivity. Please be careful when using an electric set-up device)
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 35.98 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
VAC Series Carbide 2-Flute Long Neck Square End Mill
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered), and heat-treated steel (up to 50 HRC)
-Effective for deep cutting due to long neck type
-Ultra-fine particle carbide base material and coating with excellent adhesion and heat resistance are adopted
-Can machine heat-treated steel up to 50HRC
-. Optimal for machining in low to medium rotation range due to general 30° helix angle
-Coating with excellent lubricity provides stable abrasion resistance and improves workpiece shape accuracy (VAC coating has weak electrical conductivity. Please be careful when using an electric set-up device)
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 22.84 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
VAC Series Carbide 4-Flute Uneven Lead Square End Mill
MISUMI
[Features]
-Demonstrates high performance when machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-Suppresses chattering with uneven pitch and uneven flutes
-Ultra-fine particle carbide base material and coating with excellent adhesion and heat resistance are used
-Stable machining is possible while maintaining the accuracy of the finished surface
-Coating with excellent lubricity provides stable abrasion resistance and improves the shape accuracy of the workpiece (VAC coating has weak electrical conductivity. Please be careful when using an electric set-up device)
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 38.20 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Regular Model)
MISUMI
- Volume Discount
Configure nowStarting from∗ ： 21.35 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model)
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered), and heat-treated steel (up to 50 HRC)
-Effective for machining deep parts due to extra long blade length
-Ultra-fine-grained carbide base material and coating with excellent adhesion and heat resistance are used
-Can machine heat-treated steel up to 50HRC
-. Optimal for machining in low to medium rotation range due to universal 30° helix angle
-Coating with excellent lubricity provides stable abrasion resistance and improves workpiece shape accuracy (VAC coating has weak electrical conductivity. Please be careful when using an electric set-up device)
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 39.03 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
VAC Series Carbide 2-Flute Square End Mill
MISUMI
[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered), and heat-treated steel (up to 50 HRC)
-All-purpose blade with regular 2-blade length
-Ultra-fine carbide base material and coating with excellent adhesion and heat resistance are used
-Can machine heat-treated steel up to 50HRC
-. Optimal for machining in low to medium rotation range due to general purpose helix angle of 30°
-Coating with excellent lubricity provides stable abrasion resistance and improves workpiece shape accuracy (VAC coating has weak electrical conductivity. Please be careful when using an electric set-up device)
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 16.60 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Short Model)
MISUMI
[Features]
-The chatter is suppressed by uneven pitches and uneven flutes. Stable machining with consistent surface accuracy is possible
-It uses an ultra-fine grain carbide base material. The coating with excellent adhesion and heat resistance enables machining under high-speed conditions
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.- Volume Discount
Configure nowStarting from∗ ： 18.33 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
GS MILL Heavy GSHV
NACHI(FUJIKOSHI)
Suitable for roughing and medium finishing of workpiece materials such as steel and stainless steel. Performs high-efficiency machining even in BT30 machine with low cutting resistance- Volume Discount
Configure nowStarting from∗ ： 119.57 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
GS MILL Roughing GSRE
NACHI(FUJIKOSHI)
Performs high-speed, high-efficiency machining of workpiece materials such as carbon steel and stainless steel.- Volume Discount
Configure nowStarting from∗ ： 120.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
GS MILL 4-Flute Blade 4GS
NACHI(FUJIKOSHI)
Supports a wide variety of materials such as green wood and hardened steel. Suited for machining grooves / finishing side surface.- Volume Discount
Configure nowStarting from∗ ： 39.48 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
- Promotional pricing ends 31/12/2024
GSX MILL 2-Flute Blade 2.5D GSX2C-2.5D
NACHI(FUJIKOSHI)
Compatible with everything from wet machining of green timber to high speed dry machining of high hardness materials. Gash land type flute.- Volume Discount
Configure nowStarting from∗ ： 22.27 € Special price Min. Shipping Days ： Same day *Unit price with basic configuration
-
GSX MILL 2-Flute Blade 2.5D P Type GSX2P-2.5D
NACHI(FUJIKOSHI)
Supports a wide variety of materials such as green wood and hardened steel. Suited for finishing work. Blade tip is a sharp corner.- Volume Discount
Configure nowStarting from∗ ： 22.27 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 22.27 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Blade diameter (D)(φ) |
| work material |
| Blade length (ℓ)(mm) |
| Number of flutes(sheet) |
| Type |
| Coating |
| Shank diameter (d)(mm) |
| Overall Length (L)(mm) |
| Underneck length (ℓ1)(mm) |
| Machining Application |
| Blade tip shape |
| Torsion Angle (θ) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) | NACHI(FUJIKOSHI) |
| Product Series | TSC series carbide high-helical end mill, multi-flute, 53° spiral / short model | TSC series carbide roughing end mill, fine pitch / short model | TSC series carbide roughing end mill, fine pitch / regular model | TSC series carbide roughing end mill, fine pitch / long model | TSC series carbide roughing end mill, fine pitch / long regular model | TSC series carbide roughing end mill, 45° spiral / fine pitch / short model | TSC series carbide roughing end mill, 45° spiral / fine pitch / regular model | TSC series carbide roughing end mill, 45° spiral / fine pitch / long model | TS coated carbide roughing end mill, 45°spiral, fine pitch / long shank, regular model | TSC Series Carbide Square End Mill for Stainless Steel Machining, 3-Flute, 60° Spiral / Short Model | TSC Series Carbide Roughing End Mill for Stainless Steel Machining | TSC Series Carbide Square End Mill for Titanium Machining, 4-Flute, 45° Spiral / Short Model | XAL Series Carbide Square End Mill, 2-Flute / 1.5D Flute Length (Stub) Model | XAL Series Carbide Square End Mill, 2-Flute / 2, 5D Flute Length Model | XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) Model | XAL Series Carbide Square End Mill, 4-Flute / 2.5D Flute Length Model | XAL Series Carbide Square End Mill, 4-Flute / 4D Flute Length (Long) Model | TSC series carbide multi-functional square end mill, 4-flute, 45° spiral / short model | Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill | Carbide Square End Mill, 2-Flute / 0.01 mm Designation Model | XAL Coated Carbide Long Neck Square End Mill, 4-Flute / Long Neck Model | XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Regular Model | XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion / Long Model | VAC Series Carbide 2-Flute Square End Mill (Extra-Long Model) | VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Regular Model) | VAC Series Carbide 4-Flute Square End Mill (Extra-Long Model) | VAC Series Carbide Uneven Lead End Mill for Difficult-to-Cut Materials (Short Model) | ||||||||||||||||||
| Starting from∗ | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | - Volume Discount | 40.63 € *Unit price with basic configuration Volume Discount | 75.33 € *Unit price with basic configuration Volume Discount | 105.15 € *Unit price with basic configuration Volume Discount | 81.46 € *Unit price with basic configuration Volume Discount | 104.92 € *Unit price with basic configuration Volume Discount | 9.15 € *Unit price with basic configuration Volume Discount | 10.07 € *Unit price with basic configuration Volume Discount | 12.66 € *Unit price with basic configuration Volume Discount | 10.30 € *Unit price with basic configuration Volume Discount | 23.56 € *Unit price with basic configuration Volume Discount | 42.42 € *Unit price with basic configuration Volume Discount | - | - | - | - | 33.17 € *Unit price with basic configuration Volume Discount | 32.66 € *Unit price with basic configuration Volume Discount | 25.15 € *Unit price with basic configuration Volume Discount | 48.45 € *Unit price with basic configuration Volume Discount | 17.35 € *Unit price with basic configuration Volume Discount | 23.86 € *Unit price with basic configuration Volume Discount | 29.38 € *Unit price with basic configuration Volume Discount | 45.45 € *Unit price with basic configuration Volume Discount | 35.98 € *Unit price with basic configuration Volume Discount | 22.84 € *Unit price with basic configuration Volume Discount | 38.20 € *Unit price with basic configuration Volume Discount | 21.35 € *Unit price with basic configuration Volume Discount | 39.03 € *Unit price with basic configuration Volume Discount | 16.60 € *Unit price with basic configuration Volume Discount | 18.33 € *Unit price with basic configuration Volume Discount | 119.57 € *Unit price with basic configuration Volume Discount | 120.00 € *Unit price with basic configuration Volume Discount | 39.48 € *Unit price with basic configuration Volume Discount | 22.27 € Special price *Unit price with basic configuration Promotional pricing ends 31/12/2024Volume Discount | 22.27 € *Unit price with basic configuration Volume Discount | 22.27 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | Same day | 5 Days | 5 Days | 7 Days | 7 Days | 7 Days | 7 Days | 7 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||
| Blade diameter (D)(φ) | 1 ～ 12 | 5 ～ 20 | 3 ～ 20 | 6 ～ 20 | 5 ～ 20 | 5 ～ 20 | 3 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 25 | 3 ～ 16 | 3 ～ 12 | 6 ～ 20 | 6 ～ 20 | 0.5 ～ 20 | 1 ～ 12 | 0.5 ～ 12 | 1.5 ～ 16 | 1 ～ 12 | 3 ～ 12 | 6 ～ 12 | 2 ～ 20 | 6 ～ 12 | 6 ～ 12 | 3.15 ～ 19.99 | 1 ～ 12 | 1 ～ 16 | 2 ～ 12 | 1 ～ 6 | 1 ～ 12 | 1 ～ 12 | 2 ～ 25 | 1 ～ 20 | 0.2 ～ 12 | 2 ～ 20 | 3 ～ 25 | 1.5 ～ 25 | 0.3 ～ 20 | 3 ～ 20 | 6 ～ 20 | 6 ～ 20 | 1 ～ 18 | 0.2 ～ 20 | 1 ～ 20 | 1 ～ 20 |
| work material | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[○] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[○] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[○] | General Steel[◎] | General Steel[○] | General Steel[○] | General Steel[◎] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] | General Steel[◎] |
| Blade length (ℓ)(mm) | 2 ～ 24 | 10 ～ 38 | 15 ～ 45 | 25 ～ 65 | 15 ～ 45 | 10 ～ 38 | 15 ～ 45 | 25 ～ 65 | 15 ～ 45 | 13 ～ 44 | 7 ～ 35 | 10.5 ～ 38 | 15 ～ 50 | 14 ～ 42 | 0.75 ～ 30 | 2.5 ～ 30 | 2 ～ 48 | 3.75 ～ 40 | 4 ～ 48 | 8 ～ 26 | - | 3 ～ 60 | - | - | 3.5 ～ 48 | 2 ～ 24 | 2.5 ～ 40 | 6 ～ 38 | 1.5 ～ 9 | 4 ～ 48 | 5 ～ 60 | 4 ～ 50 | 4 ～ 80 | 0.3 ～ 20 | 6 ～ 45 | 8 ～ 38 | 6 ～ 120 | 0.6 ～ 45 | 7 ～ 26 | 13 ～ 38 | 13 ～ 38 | 2.5 ～ 32 | 0.5 ～ 50 | 2.5 ～ 50 | 2 ～ 40 |
| Number of flutes(sheet) | 4 ～ 6 | 4 | 3 ～ 4 | 4 | 3 ～ 4 | 3 ～ 4 | 3 ～ 4 | 3 ～ 4 | 3 ～ 4 | 6 ～ 8 | 3 | 3 | 3 | 4 | 2 | 2 | 2 | 4 | 4 | 4 | 2 | 2 ～ 4 | 4 | 4 | 2 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 2 | 2 | 4 | 4 | 4 | 2 | 4 | 4 | 4 | 4 | 2 | 2 | 2 |
| Type | High Helical | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | High Helical | Square | Square | Roughing | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Long-Neck Square | Square | Square | Square | Square | Long-Neck Square | Square | Square | Square | Square | Square | Roughing | Roughing | Square | Square | Square | Square |
| Coating | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | TiAlN | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | Non-Coated | For High Hardness (Silicon Group) / Non-Coated | Non-Coated | Non-Coated | Non-Coated | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For High Hardness (Silicon Group) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For High Hardness (Silicon Group) | - | - | - | - | - | - | - | TiAlN | TiAlN | TiAlN | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) | For General Steels (AlCrN, etc.) |
| Shank diameter (d)(mm) | 6 ～ 12 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 25 | 6 ～ 16 | 6 ～ 12 | 6 ～ 20 | 6 ～ 20 | 4 ～ 20 | 4 ～ 12 | 4 ～ 12 | 4 ～ 16 | 4 ～ 12 | 6 ～ 12 | 6 ～ 12 | 4 ～ 20 | 6 ～ 12 | 6 ～ 12 | 6 ～ 20 | 3 ～ 12 | 3 ～ 16 | 6 ～ 12 | 4 ～ 6 | 4 ～ 12 | 4 ～ 12 | 6 ～ 25 | 6 ～ 20 | 4 ～ 12 | 6 ～ 20 | 6 ～ 25 | 4 ～ 25 | 4 ～ 20 | 6 ～ 20 | 6 ～ 20 | 6 ～ 20 | 3 ～ 20 | 4 ～ 20 | 4 ～ 20 | 4 ～ 20 |
| Overall Length (L)(mm) | 60 ～ 100 | 57 ～ 104 | 60 ～ 130 | 100 ～ 150 | 100 ～ 150 | 60 ～ 110 | 60 ～ 130 | 100 ～ 150 | 100 ～ 150 | 57 ～ 104 | 60 ～ 105 | 60 ～ 100 | 60 ～ 130 | 60 ～ 120 | 40 ～ 110 | 45 ～ 85 | 45 ～ 100 | 45 ～ 105 | 45 ～ 100 | 60 ～ 100 | 60 ～ 85 | 40 ～ 130 | 45 ～ 75 | 60 ～ 85 | 40 ～ 105 | 40 ～ 75 | 40 ～ 120 | 60 ～ 100 | 50 ～ 100 | 45 ～ 105 | 45 ～ 105 | 50 ～ 120 | 60 ～ 200 | 40 ～ 110 | 50 ～ 100 | 57 ～ 104 | 60 ～ 250 | 40 ～ 100 | 54 ～ 92 | 50 ～ 100 | 50 ～ 100 | 38 ～ 100 | 40 ～ 100 | 40 ～ 100 | 40 ～ 100 |
| Underneck length (ℓ1)(mm) | 17 ～ 70 | 17 ～ 66 | 20 ～ 92 | 30 ～ 112 | 20 ～ 95 | 17 ～ 72 | 20 ～ 92 | 30 ～ 112 | 20 ～ 95 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 5 ～ 25 | - | - | 4 ～ 50 | - | - | - | - | 0.5 ～ 50 | - | - | - | - | - | - | - | - | - | - | - |
| Machining Application | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Plunging (Z feed) / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove / Inclined Cuts | Plane / Side | Plane / Side | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Inclined Cuts | Plane / Side / Groove | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts / Countersinking | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts | Plane / Side / Groove / Inclined Cuts |
| Blade tip shape | Sharp Edge | Micro R | Micro R | Micro R | Micro R | C plane | C plane | C plane | C plane | With Lead | C plane | C plane | C plane | C plane | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | Sharp Edge / With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | Sharp Edge / With Lead | With Lead | With Lead | With Lead | Sharp Edge / With Lead | With Lead | With Lead | With Lead | - | - | - | - | - | - | - | With Lead | With Lead | Sharp Edge | With Lead | With Lead | With Lead |
| Torsion Angle (θ) | High Helix (45˚ to 60˚) | Weak torsion (15˚ to 25˚) | Weak torsion (15˚ to 25˚) | Weak torsion (15˚ to 25˚) | Weak torsion (15˚ to 25˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | Standard Helix (30˚ to 40˚) | High Helix (45˚ to 60˚) | High Helix (45˚ to 60˚) | Variable lead | - | - | - | - | - | - | - | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) | Standard Helix (30˚ to 40˚) |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Blade diameter (D)(φ)
-
0.01～0.99
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.31
- 0.32
- 0.33
- 0.34
- 0.35
- 0.36
- 0.37
- 0.38
- 0.39
- 0.4
- 0.41
- 0.42
- 0.43
- 0.44
- 0.45
- 0.46
- 0.47
- 0.48
- 0.49
- 0.5
- 0.51
- 0.52
- 0.53
- 0.54
- 0.55
- 0.56
- 0.57
- 0.58
- 0.59
- 0.6
- 0.61
- 0.62
- 0.63
- 0.64
- 0.65
- 0.66
- 0.67
- 0.68
- 0.69
- 0.7
- 0.71
- 0.72
- 0.73
- 0.74
- 0.75
- 0.76
- 0.77
- 0.78
- 0.79
- 0.8
- 0.81
- 0.82
- 0.83
- 0.84
- 0.85
- 0.86
- 0.87
- 0.88
- 0.89
- 0.9
- 0.91
- 0.92
- 0.93
- 0.94
- 0.95
- 0.96
- 0.97
- 0.98
- 0.99
-
1～1.99
- 1
- 1.01
- 1.02
- 1.03
- 1.04
- 1.05
- 1.06
- 1.07
- 1.08
- 1.09
- 1.1
- 1.11
- 1.12
- 1.13
- 1.14
- 1.15
- 1.16
- 1.17
- 1.18
- 1.19
- 1.2
- 1.21
- 1.22
- 1.23
- 1.24
- 1.25
- 1.26
- 1.27
- 1.28
- 1.29
- 1.3
- 1.31
- 1.32
- 1.33
- 1.34
- 1.35
- 1.36
- 1.37
- 1.38
- 1.39
- 1.4
- 1.41
- 1.42
- 1.43
- 1.44
- 1.45
- 1.46
- 1.47
- 1.48
- 1.49
- 1.5
- 1.51
- 1.52
- 1.53
- 1.54
- 1.55
- 1.56
- 1.57
- 1.58
- 1.59
- 1.6
- 1.61
- 1.62
- 1.63
- 1.64
- 1.65
- 1.66
- 1.67
- 1.68
- 1.69
- 1.7
- 1.71
- 1.72
- 1.73
- 1.74
- 1.75
- 1.76
- 1.77
- 1.78
- 1.79
- 1.8
- 1.81
- 1.82
- 1.83
- 1.84
- 1.85
- 1.86
- 1.87
- 1.88
- 1.89
- 1.9
- 1.91
- 1.92
- 1.93
- 1.94
- 1.95
- 1.96
- 1.97
- 1.98
- 1.99
-
2～2.99
- 2
- 2.01
- 2.02
- 2.03
- 2.04
- 2.05
- 2.06
- 2.07
- 2.08
- 2.09
- 2.1
- 2.11
- 2.12
- 2.13
- 2.14
- 2.15
- 2.16
- 2.17
- 2.18
- 2.19
- 2.2
- 2.21
- 2.22
- 2.23
- 2.24
- 2.25
- 2.26
- 2.27
- 2.28
- 2.29
- 2.3
- 2.31
- 2.32
- 2.33
- 2.34
- 2.35
- 2.36
- 2.37
- 2.38
- 2.39
- 2.4
- 2.41
- 2.42
- 2.43
- 2.44
- 2.45
- 2.46
- 2.47
- 2.48
- 2.49
- 2.5
- 2.51
- 2.52
- 2.53
- 2.54
- 2.55
- 2.56
- 2.57
- 2.58
- 2.59
- 2.6
- 2.61
- 2.62
- 2.63
- 2.64
- 2.65
- 2.66
- 2.67
- 2.68
- 2.69
- 2.7
- 2.71
- 2.72
- 2.73
- 2.74
- 2.75
- 2.76
- 2.77
- 2.78
- 2.79
- 2.8
- 2.81
- 2.82
- 2.83
- 2.84
- 2.85
- 2.86
- 2.87
- 2.88
- 2.89
- 2.9
- 2.91
- 2.92
- 2.93
- 2.94
- 2.95
- 2.96
- 2.97
- 2.98
- 2.99
-
3～3.99
- 3
- 3.01
- 3.02
- 3.03
- 3.04
- 3.05
- 3.06
- 3.07
- 3.08
- 3.09
- 3.1
- 3.11
- 3.12
- 3.13
- 3.14
- 3.15
- 3.16
- 3.17
- 3.175
- 3.18
- 3.19
- 3.2
- 3.21
- 3.22
- 3.23
- 3.24
- 3.25
- 3.26
- 3.27
- 3.28
- 3.29
- 3.3
- 3.31
- 3.32
- 3.33
- 3.34
- 3.35
- 3.36
- 3.37
- 3.38
- 3.39
- 3.4
- 3.41
- 3.42
- 3.43
- 3.44
- 3.45
- 3.46
- 3.47
- 3.48
- 3.49
- 3.5
- 3.51
- 3.52
- 3.53
- 3.54
- 3.55
- 3.56
- 3.57
- 3.58
- 3.59
- 3.6
- 3.61
- 3.62
- 3.63
- 3.64
- 3.65
- 3.66
- 3.67
- 3.68
- 3.69
- 3.7
- 3.71
- 3.72
- 3.73
- 3.74
- 3.75
- 3.76
- 3.77
- 3.78
- 3.79
- 3.8
- 3.81
- 3.82
- 3.83
- 3.84
- 3.85
- 3.86
- 3.87
- 3.88
- 3.89
- 3.9
- 3.91
- 3.92
- 3.93
- 3.94
- 3.95
- 3.96
- 3.97
- 3.98
- 3.99
-
4～4.99
- 4
- 4.01
- 4.02
- 4.03
- 4.04
- 4.05
- 4.06
- 4.07
- 4.08
- 4.09
- 4.1
- 4.11
- 4.12
- 4.13
- 4.14
- 4.15
- 4.16
- 4.17
- 4.18
- 4.19
- 4.2
- 4.21
- 4.22
- 4.23
- 4.24
- 4.25
- 4.26
- 4.27
- 4.28
- 4.29
- 4.3
- 4.31
- 4.32
- 4.33
- 4.34
- 4.35
- 4.36
- 4.37
- 4.38
- 4.39
- 4.4
- 4.41
- 4.42
- 4.43
- 4.44
- 4.45
- 4.46
- 4.47
- 4.48
- 4.49
- 4.5
- 4.51
- 4.52
- 4.53
- 4.54
- 4.55
- 4.56
- 4.57
- 4.58
- 4.59
- 4.6
- 4.61
- 4.62
- 4.63
- 4.64
- 4.65
- 4.66
- 4.67
- 4.68
- 4.69
- 4.7
- 4.71
- 4.72
- 4.73
- 4.74
- 4.75
- 4.76
- 4.77
- 4.775
- 4.78
- 4.79
- 4.8
- 4.81
- 4.82
- 4.83
- 4.84
- 4.85
- 4.86
- 4.87
- 4.88
- 4.89
- 4.9
- 4.91
- 4.92
- 4.93
- 4.94
- 4.95
- 4.96
- 4.97
- 4.98
- 4.99
-
5～5.99
- 5
- 5.01
- 5.02
- 5.03
- 5.04
- 5.05
- 5.06
- 5.07
- 5.08
- 5.09
- 5.1
- 5.11
- 5.12
- 5.13
- 5.14
- 5.15
- 5.16
- 5.17
- 5.18
- 5.19
- 5.2
- 5.21
- 5.22
- 5.23
- 5.24
- 5.25
- 5.26
- 5.27
- 5.28
- 5.29
- 5.3
- 5.31
- 5.32
- 5.33
- 5.34
- 5.35
- 5.36
- 5.37
- 5.38
- 5.39
- 5.4
- 5.41
- 5.42
- 5.43
- 5.44
- 5.45
- 5.46
- 5.47
- 5.48
- 5.49
- 5.5
- 5.51
- 5.52
- 5.53
- 5.54
- 5.55
- 5.56
- 5.57
- 5.58
- 5.59
- 5.6
- 5.61
- 5.62
- 5.63
- 5.64
- 5.65
- 5.66
- 5.67
- 5.68
- 5.69
- 5.7
- 5.71
- 5.72
- 5.73
- 5.74
- 5.75
- 5.76
- 5.77
- 5.78
- 5.79
- 5.8
- 5.81
- 5.82
- 5.83
- 5.84
- 5.85
- 5.86
- 5.87
- 5.88
- 5.89
- 5.9
- 5.91
- 5.92
- 5.93
- 5.94
- 5.95
- 5.96
- 5.97
- 5.98
- 5.99
-
6～6.9
- 6
- 6H
- 6.01
- 6.05
- 6.1
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.5
- 6.57
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.99
- 7
- 7.01
- 7.02
- 7.03
- 7.04
- 7.05
- 7.06
- 7.07
- 7.08
- 7.09
- 7.1
- 7.11
- 7.12
- 7.13
- 7.14
- 7.15
- 7.16
- 7.17
- 7.18
- 7.19
- 7.2
- 7.21
- 7.22
- 7.23
- 7.24
- 7.25
- 7.26
- 7.27
- 7.28
- 7.29
- 7.3
- 7.31
- 7.32
- 7.33
- 7.34
- 7.35
- 7.36
- 7.37
- 7.38
- 7.39
- 7.4
- 7.41
- 7.42
- 7.43
- 7.44
- 7.45
- 7.46
- 7.47
- 7.48
- 7.49
- 7.5
- 7.51
- 7.52
- 7.53
- 7.54
- 7.55
- 7.56
- 7.57
- 7.58
- 7.59
- 7.6
- 7.61
- 7.62
- 7.63
- 7.64
- 7.65
- 7.66
- 7.67
- 7.68
- 7.69
- 7.7
- 7.71
- 7.72
- 7.73
- 7.74
- 7.75
- 7.76
- 7.77
- 7.78
- 7.79
- 7.8
- 7.81
- 7.82
- 7.83
- 7.84
- 7.85
- 7.86
- 7.87
- 7.88
- 7.89
- 7.9
- 7.91
- 7.92
- 7.93
- 7.94
- 7.95
- 7.96
- 7.97
- 7.98
- 7.99
-
8～8.9
- 8
- 8H
- 8.01
- 8.02
- 8.1
- 8.15
- 8.2
- 8.21
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.75
- 8.8
- 8.9
-
9～9.99
- 9
- 9.01
- 9.02
- 9.03
- 9.04
- 9.05
- 9.06
- 9.07
- 9.08
- 9.09
- 9.1
- 9.11
- 9.12
- 9.13
- 9.14
- 9.15
- 9.16
- 9.17
- 9.18
- 9.19
- 9.2
- 9.21
- 9.22
- 9.23
- 9.24
- 9.25
- 9.26
- 9.27
- 9.28
- 9.29
- 9.3
- 9.31
- 9.32
- 9.33
- 9.34
- 9.35
- 9.36
- 9.37
- 9.38
- 9.39
- 9.4
- 9.41
- 9.42
- 9.43
- 9.44
- 9.45
- 9.46
- 9.47
- 9.48
- 9.49
- 9.5
- 9.51
- 9.52
- 9.525
- 9.53
- 9.54
- 9.55
- 9.56
- 9.57
- 9.58
- 9.59
- 9.6
- 9.61
- 9.62
- 9.63
- 9.64
- 9.65
- 9.66
- 9.67
- 9.68
- 9.69
- 9.7
- 9.71
- 9.72
- 9.73
- 9.74
- 9.75
- 9.76
- 9.77
- 9.78
- 9.79
- 9.8
- 9.81
- 9.82
- 9.83
- 9.84
- 9.85
- 9.86
- 9.87
- 9.88
- 9.89
- 9.9
- 9.91
- 9.92
- 9.93
- 9.94
- 9.95
- 9.96
- 9.97
- 9.98
- 9.99
-
10～10.9
- 10
- 10H
- 10.1
- 10.15
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.99
- 11
- 11.01
- 11.02
- 11.03
- 11.04
- 11.05
- 11.06
- 11.07
- 11.08
- 11.09
- 11.1
- 11.11
- 11.12
- 11.13
- 11.14
- 11.15
- 11.16
- 11.17
- 11.18
- 11.19
- 11.2
- 11.21
- 11.22
- 11.23
- 11.24
- 11.25
- 11.26
- 11.27
- 11.28
- 11.29
- 11.3
- 11.31
- 11.32
- 11.33
- 11.34
- 11.35
- 11.36
- 11.37
- 11.38
- 11.39
- 11.4
- 11.41
- 11.42
- 11.43
- 11.44
- 11.45
- 11.46
- 11.47
- 11.48
- 11.49
- 11.5
- 11.51
- 11.52
- 11.53
- 11.54
- 11.55
- 11.56
- 11.57
- 11.58
- 11.59
- 11.6
- 11.61
- 11.62
- 11.63
- 11.64
- 11.65
- 11.66
- 11.67
- 11.68
- 11.69
- 11.7
- 11.71
- 11.72
- 11.73
- 11.74
- 11.75
- 11.76
- 11.77
- 11.78
- 11.79
- 11.8
- 11.81
- 11.82
- 11.83
- 11.84
- 11.85
- 11.86
- 11.87
- 11.88
- 11.89
- 11.9
- 11.91
- 11.92
- 11.93
- 11.94
- 11.95
- 11.96
- 11.97
- 11.98
- 11.99
-
12～12.9
- 12
- 12H
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.99
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.51
- 15.52
- 15.53
- 15.54
- 15.55
- 15.56
- 15.57
- 15.58
- 15.59
- 15.6
- 15.61
- 15.62
- 15.63
- 15.64
- 15.65
- 15.66
- 15.67
- 15.68
- 15.69
- 15.7
- 15.71
- 15.72
- 15.73
- 15.74
- 15.75
- 15.76
- 15.77
- 15.78
- 15.79
- 15.8
- 15.81
- 15.82
- 15.83
- 15.84
- 15.85
- 15.86
- 15.87
- 15.875
- 15.88
- 15.89
- 15.9
- 15.91
- 15.92
- 15.93
- 15.94
- 15.95
- 15.96
- 15.97
- 15.98
- 15.99
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.99
- 19
- 19..5
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.51
- 19.52
- 19.53
- 19.54
- 19.55
- 19.56
- 19.57
- 19.58
- 19.59
- 19.6
- 19.61
- 19.62
- 19.63
- 19.64
- 19.65
- 19.66
- 19.67
- 19.68
- 19.69
- 19.7
- 19.71
- 19.72
- 19.73
- 19.74
- 19.75
- 19.76
- 19.77
- 19.78
- 19.79
- 19.8
- 19.81
- 19.82
- 19.83
- 19.84
- 19.85
- 19.86
- 19.87
- 19.88
- 19.89
- 19.9
- 19.91
- 19.92
- 19.93
- 19.94
- 19.95
- 19.96
- 19.97
- 19.98
- 19.99
-
20～20.5
- 20
- 20.5
-
21～21.5
- 21
- 21.5
-
22～22.5
- 22
- 22.5
-
23～23.5
- 23
- 23.5
-
24～24.5
- 24
- 24.5
-
25～25.5
- 25
- 25.4
- 25.5
-
26～26.5
- 26
- 26.5
-
27～27.5
- 27
- 27.5
-
28～28.5
- 28
- 28.5
-
29～29.5
- 29
- 29.5
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
-
work material
-
Blade length (ℓ)(mm)
-
0.01～0.9
- 0.01
- 0.02
- 0.03
- 0.04
- 0.045
- 0.05
- 0.06
- 0.07
- 0.075
- 0.08
- 0.09
- 0.1
- 0.105
- 0.12
- 0.135
- 0.15
- 0.16
- 0.2
- 0.23
- 0.24
- 0.25
- 0.3
- 0.32
- 0.4
- 0.45
- 0.5
- 0.55
- 0.6
- 0.65
- 0.7
- 0.75
- 0.8
- 0.9
-
1～1.9
- 1
- 1.05
- 1.1
- 1.2
- 1.25
- 1.3
- 1.35
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.96
- 3
- 3.1
- 3.18
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.9
- 3.96
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.3688
- 4.4
- 4.5
- 4.6
- 4.7
- 4.78
- 4.8
- 4.9
-
5～5.9
- 5
- 5.1
- 5.2
- 5.25
- 5.3
- 5.4
- 5.5
- 5.5626
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.1
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.75
- 6.8
- 6.9
-
7～7.9502
- 7
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.5438
- 7.6
- 7.7
- 7.8
- 7.9
- 7.9502
-
8～8.9
- 8
- 8.1
- 8.2
- 8.25
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.1186
- 9.2
- 9.3
- 9.4
- 9.5
- 9.52
- 9.525
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.3124
- 10.4
- 10.49
- 10.5
- 10.6
- 10.7
- 10.7188
- 10.8
- 10.9
-
11～11.9126
- 11
- 11.0998
- 11.1
- 11.2
- 11.3
- 11.4
- 11.5
- 11.5062
- 11.6
- 11.7
- 11.8
- 11.9
- 11.9126
-
12
-
12～12.9
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.8938
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.4874
- 13.5
- 13.6
- 13.7
- 13.8
- 13.8938
-
14～14.9
- 14
- 14.1
- 14.2
- 14.2748
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.8
- 15.875
- 15.88
- 15.9
-
16～16.8
- 16
- 16.2
- 16.4
- 16.5
- 16.6
- 16.8
-
17～17.8
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.4498
- 17.5
- 17.6
- 17.7
- 17.8
-
18～18.8
- 18
- 18.2
- 18.2626
- 18.3
- 18.4
- 18.5
- 18.6
- 18.8
-
19～19.8
- 19
- 19.05
- 19.2
- 19.4
- 19.5
- 19.6
- 19.8
-
20～20.8
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.6502
- 20.7
- 20.8
-
21～21.9
- 21
- 21.2
- 21.3
- 21.4
- 21.4376
- 21.5
- 21.6
- 21.8
- 21.9
-
22～22.8
- 22
- 22.2
- 22.225
- 22.4
- 22.5
- 22.6
- 22.8
-
23～23.8
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.4188
- 23.5
- 23.6
- 23.7998
- 23.8
-
24～24.9
- 24
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.8
- 24.9
-
25～25.8
- 25
- 25.2
- 25.4
- 25.5
- 25.6
- 25.8
-
26～26.8
- 26
- 26.1874
- 26.2
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
-
27～27.9
- 27
- 27.0002
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.7876
- 27.8
- 27.9
-
28～28.8
- 28
- 28.2
- 28.4
- 28.5
- 28.575
- 28.8
-
29～29.8
- 29
- 29.1
- 29.2
- 29.5
- 29.6
- 29.7
- 29.8
-
30～30.9626
- 30
- 30.1752
- 30.3
- 30.4
- 30.5
- 30.6
- 30.8
- 30.9
- 30.9626
-
31～31.8
- 31
- 31.2
- 31.5
- 31.6
- 31.75
- 31.8
-
32～32.8
- 32
- 32.1
- 32.4
- 32.5
- 32.7
- 32.8
-
33～33.9
- 33
- 33.2
- 33.3
- 33.3502
- 33.6
- 33.9
-
34～34.8
- 34
- 34.2
- 34.4
- 34.5
- 34.8
-
35～35.8
- 35
- 35.1
- 35.2
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
-
36～36.8
- 36
- 36.4
- 36.4998
- 36.5
- 36.8
-
37～37.6936
- 37
- 37.2
- 37.5
- 37.6
- 37.6936
-
38～38.8
- 38
- 38.4
- 38.5
- 38.8
-
39～39.7002
- 39
- 39.2
- 39.5
- 39.6
- 39.7002
-
40～40.8
- 40
- 40.4
- 40.4876
- 40.5
- 40.8
-
41～41.6
- 41
- 41.2
- 41.28
- 41.5
- 41.6
-
42～42.8498
- 42
- 42.4
- 42.5
- 42.8
- 42.8498
-
43～43.6
- 43
- 43.2
- 43.5
- 43.6
-
44～44.8
- 44
- 44.4
- 44.5
- 44.8
-
45～45.5
- 45
- 45.2
- 45.5
-
46～46.8
- 46
- 46.4
- 46.4312
- 46.5
- 46.8
-
47～47.8
- 47
- 47.2
- 47.5
- 47.6
- 47.8
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.2252
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51～51.5
- 51
- 51.5
-
52
-
53～53.5
- 53
- 53.1876
- 53.5
-
54～54.5
- 54
- 54.5
-
55～55.5
- 55
- 55.5
-
56
-
57～57.5
- 57
- 57.15
- 57.5
-
58～58.7502
- 58
- 58.5
- 58.7502
-
59～59.5376
- 59
- 59.5
- 59.5376
-
60～60.5
- 60
- 60.5
-
62
-
63～63.5
- 63
- 63.5
-
64
-
65
-
66
-
67
-
70～70.5
- 70
- 70.5
-
72
-
75
-
76
-
77.95
-
78
-
80
-
82
-
83
-
85
-
90
-
95
-
100
-
103
-
106
-
110
-
112
-
115
-
120
-
125
-
130
-
150
-
200
[4-75/1mm Unit(s)]
-
-
Number of flutes(sheet)
-
Type
- Square
- Roughing
- Long-Neck Square
- High Helical
-
Coating
-
Shank diameter (d)(mm)
-
Overall Length (L)(mm)
-
Underneck length (ℓ1)(mm)
-
Machining Application
-
Blade tip shape
-
Torsion Angle (θ)
Brand
-
- NS TOOL (66)
- OSG (58)
- SANDVIK (46)
- NACHI(FUJIKOSHI) (38)
- OKAZAKI SEIKO (33)
- KYOCERA (18)
- DIJET (17)
- 7 LEADERS (15)
- ASAHI TOOLS (15)
- SANKO MFG (13)
- KYOWA SEIKO (12)
- THE CUT (12)
- UNION TOOL (10)
- SPEED TIGER (7)
- ATOM (5)
- TOYO DRILL (4)
- WIDIN (3)
- EIKOSHA (2)
- GCT (2)
- VAN_HOORN (2)
- GUHRING (1)
- PROCHI (1)
- TAIYO-TOOL (0)
CAD data type
-
- 2D
- 3D
Categories related to Carbide Square End Mills
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.