Adhesive

?* Information on days to ship and prices

• 

  WEICON Silicone HT-300

  WEICON

  High temperature resistant
  WEICON HT 300 adhesive and sealant is red, high-temperature resistant (+300°C/+572°F), free of solvents, strong, and has acetatecross-linking properties. It is resistant to weathering, ageing and chemicals and is extremely elastic (breaking elongation of approx. 500%).
  HT 300 is particularly suitable for heatexposed bonds and seals and adheres very well to steel, aluminium, glass, ceramics and many additional materials.
  HT 300 can be used in industrial furnaces, flue gas systems, heating installations, exhaust gas routing, heating cabinets and in many additional areas.

  Select to compare

  Configure now
  Starting from∗ ：	12.03 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICONLOCK AN 306-48

  WEICON

  Retaining cylindrical assemblies high temperature resistant, BAM approval
  
  medium viscosity
  high strength
  hard to disassemble

  Select to compare

  Configure now
  Starting from∗ ：	16.11 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Cartridge Gun “Standard”

  WEICON

  For low and medium viscosity adhesives. Suitable for standard cartridges up to 310 ml.

  Select to compare

  Configure now
  Starting from∗ ：	19.91 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Compressed air cartridge gun

  WEICON

  For low and medium viscosity materials (310 ml cartridges). 1.45 kN thrust at 6.8 bar operating pressure.

  Select to compare

  Configure now
  Starting from∗ ：	465.83 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  LOCTITE epoxy liquid metal, twin syringe (97990)

  NORELEM

  · 2-component epoxy adhesive
  
  · Twin syringe – easy to use
  
  · For rough and poorly fitting surfaces
  
  · High strength

  Select to compare

  Configure now
  Starting from∗ ：	28.58 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  WEICON Black-Seal

  WEICON

  Extremely resistant against oil and grease
  WEICON Black-Seal adhesive and sealant is black, high-temperature resistant (+280°C/+536°F), free of solvents, strong, oilresistant,
  grease-resistant, pressure-resistant, resistant to ageing and extremely elastic (breaking elongation of approx. 500%).
  Black-Seal is suitable for bonding and sealing in applications where particularly high oil and grease resistance is required.
  WEICON Black-Seal can be used on gearbox, valve and casing covers, oil sumps, water pumps, gears and axles, flanges, tanks and containers, and in many other areas.

  Select to compare

  Configure now
  Starting from∗ ：	12.68 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICONLOCK AN 305-73

  WEICON

  Gasketing of flanges, gearboxes and other motor housings
  high viscosity
  low strength
  easy disassembly

  Select to compare

  Configure now
  Starting from∗ ：	20.15 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICONLOCK AN 306-03

  WEICON

  Retaining cylindrical assemblies for bearings, shafts and bushings
  
  low viscosity
  high strength
  hard to disassemble

  Select to compare

  Configure now
  Starting from∗ ：	17.45 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Schraubensicherungslack

  WEICON

  Select to compare

  Configure now
  Starting from∗ ：	34.76 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Anaerobic Sealant

  PREVOST

  Sealing products: Prevost's anaerobic sealing products, PTFE sealant tape roll, saturated airtight multi-fiber thread.

  Select to compare

  Configure now
  Starting from∗ ：	25.50 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  WEICON Hand Dispenser D50 E-Mix 1:1

  WEICON

  WEICON Easy-Mix Hand Dispenser D50 1:1 for 50 ml cartridge

  Select to compare

  Configure now
  Starting from∗ ：	61.92 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Mixing Nozzles PE-PP 45

  WEICON

  WEICON Mixing Nozzles for Easy-Mix PE-PP 45

  Select to compare

  Configure now
  Starting from∗ ：	3.66 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Piston for Hand Dispenser PE-PP 45

  WEICON

  WEICON Special Piston for Dispenser Pistol Easy-Mix PE-PP 45

  Select to compare

  Configure now
  Starting from∗ ：	9.77 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VA 100

  WEICON

  Cyanoacrylate Adhesive for rubber and plastics, medium viscosity, slightly longer cure
  WEICON Contact VA 100 is a universal type for the bonding of metals, plastic and rubber, both to and among each other.
  VA 100 is ideal for the "do-it-yourself" area, but can also be used in many areas of industry.

  Select to compare

  Configure now
  Starting from∗ ：	4.65 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Silicone F

  WEICON

  Liquid, self-levelling
  WEICON Silicone F casting and sealing compound is liquid, self-levelling, spreadable, free of solvents and has acetate-crosslinking properties. It is resistant to weathering and ageing, temperature resistant up to +180°C (+356°F), extremely elastic (breaking elongation of approx. 370%) and can be used universally.
  Silicone F can be specially used for elastic bonds, insulation and impregnation and even for the sealing and casting (max. 10 mm) of technical components. It adheres well to steel, aluminium, glass, ceramics, and many additional materials.
  Silicone F can be used in machine and system construction, in plastic processing, the energy and electrical industry, in exhibition construction and shopfitting and in many additional industrial areas.

  Select to compare

  Configure now
  Starting from∗ ：	26.31 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Flex 310 M HT 200

  WEICON

  High temperature resistant
  WEICON Flex 310 M HT 200 adhesive and sealant is highly temperature resistant, overpaintable (wet in wet), sandable, has outstanding ageing resistance, and is free of silicone, isocyanate, halogens or solvents.
  Flex 310 M HT 200 is an elastic adhesive on an MS polymer basis which can be used for structural bonding in industrial applications.
  The high temperature resistance also makes it possible to bond and seal components needing to be subsequently thermal-coated.
  WEICON Flex 310 M HT 200 can be used in metal construction, in ventilation and air conditioning systems, carriage, container, wagon and vehicle construction and in all applications where silicones or products containing silicones are not suitable.

  Select to compare

  Configure now
  Starting from∗ ：	22.51 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICONLOCK AN 302-21

  WEICON

  Threadlocking, vibration-proof
  low viscosity
  low strength
  easy disassembly

  Select to compare

  Configure now
  Starting from∗ ：	17.45 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICONLOCK AN 302-72

  WEICON

  Locking of threads and stud bolts high temperature resistant, DVGW approval
  higher viscosity
  high strength
  hard to disassemble

  Select to compare

  Configure now
  Starting from∗ ：	19.40 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICONLOCK AN 305-74

  WEICON

  Gasketing of flanges, gearboxes and other motor housings
  
  high viscosity
  high strength
  hard to disassemble

  Select to compare

  Configure now
  Starting from∗ ：	20.15 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICONLOCK AN 306-40

  WEICON

  Retaining cylindrical assemblies high temperature resistant, slow cure
  
  medium viscosity
  high strength
  hard to disassemble

  Select to compare

  Configure now
  Starting from∗ ：	17.45 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICONLOCK AN 306-60

  WEICON

  Assembly of cylindrical parts for worn out bearing rings and bushings
  
  high viscosity
  high strength
  hard to disassemble

  Select to compare

  Configure now
  Starting from∗ ：	38.57 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Heatschrink hot melt tape for heat shrink tubing and mouldings

  HELLERMANN TYTON

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	28.93 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  LOCTITE screw lock (97990)

  NORELEM

  · Suitable for applications involving foodstuffs and potable water
  
  · For use with all fastenings
  
  · Various strength grades
  
  · For securing screw threads up to M 36

  Select to compare

  Configure now
  Starting from∗ ：	19.17 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  WEICON Quadro Mixing Nozzle

  WEICON

  WEICON Static Mixer Nozzle Quadro for all Easy-Mix types (except "Metal") 1:1 50 ml

  Select to compare

  Configure now
  Starting from∗ ：	2.22 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Helix Mixing Nozzle

  WEICON

  WEICON Helix Mixing Nozzle for Easy-Mix Metal

  Select to compare

  Configure now
  Starting from∗ ：	2.33 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Easy-Mix PU 90

  WEICON

  High strength, extremely fast-curing, highly viscous, very short pot life of 90 seconds
  WEICON Easy-Mix PU-90 structural adhesive is high-strength, extremely fast-curing, highly viscous, and can be sanded and painted over after approx. 30 minutes. It is weather resistant, resistant to chemicals and temperature resistant from -55°C to +125°C (-67 to +257°F) and has a very short pot life of around 90 seconds.
  WEICON PU-90 can be used to bind numerous materials such as composite materials, plastics, polyurethane, epoxies, polyester, metals, wood and ceramics to themselves and among each other with high tensile, shear and peel strength.
  PU-90 can be used in plastic technology, machine construction, model and mould making, metal construction, ship and boat building, carriage and vehicle construction, trade show and exhibition construction and in many other applications.

  Select to compare

  Configure now
  Starting from∗ ：	22.60 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Easy-Mix PU 240

  WEICON

  High strength, extremely fast-curing, highly viscous, very short pot life of 240 seconds
  WEICON Easy-Mix PU-240 structural adhesive is high-strength, extremely fastcuring, highly viscous, and can be sanded and painted over after approx. 30 minutes. It is weather resistant, resistant to chemicals and temperature resistant from -55°C to +125°C (-67 to +257°F) and has a very short pot life of around 240 seconds.
  PU-240 can be used to bind numerous materials such as composite materials, plastics, polyurethane, epoxides, polyester, metals, wood and ceramics to themselves and among each other with high tensile, shear and peel strength.
  WEICON PU-240 can be used in plastic technology, machine construction, model and mould making, metal construction, ship and boat building, carriage and vehicle construction, trade show and exhibition construction and in many other applications.

  Select to compare

  Configure now
  Starting from∗ ：	22.60 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VA 20

  WEICON

  Cyanoacrylate Adhesive for rubber and plastics, low viscosity, very fast cure
  WEICON Contact VA 20 has low viscosity (< 20 mPa•s) and hardens very quickly. VA 20 is suited for the bonding of rubber and plastics and also for precisely fitted metal/plastic joints.

  Select to compare

  Configure now
  Starting from∗ ：	9.14 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VA 110

  WEICON

  Cyanoacrylate Adhesive for rubber and plastics, medium viscosity, slightly longer curing
  The special feature of the product is its NSF approval in accordance with ANSI Standard 61 - Drinking Water System components. Thus, VA 110 also meets the highest standards and can be used in sensitive areas such as in the harmaceutical industry, in the manufacturing of cosmetics, in the food industry, in the manufacturing of toys or jewelry industry.

  Select to compare

  Configure now
  Starting from∗ ：	21.13 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VA 1401

  WEICON

  Cyanoacrylate Adhesive for rubber and plastics, medium viscosity, fast-curing
  WEICON Contact VA 1401 has medium viscosity (100-150 mPa•s) and hardens quickly. It shows good results on fabric, paper, cardboard, cartons, foam rubber and large-pored elastomers.
  VA 1401 is a universal type for the bonding of metals, plastics and rubber, both to themselves and among each other.

  Select to compare

  Configure now
  Starting from∗ ：	10.31 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VA 300

  WEICON

  Cyanoacrylate Adhesive for rubber and plastics, higher viscosity, longer curing
  WEICON Contact VA 300 has a higher viscosity (200-300 mPa•s) and a longer curing time. It is particularly suited for absorbent and porous products such as wood, cork, leather and ceramics.
  VA 300 is also suited for the bonding of metals, plastics and rubber, both to themselves and among each other.

  Select to compare

  Configure now
  Starting from∗ ：	10.31 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VA 1500

  WEICON

  Cyanoacrylate Adhesive for rubber and plastics, high viscosity, slow-curing
  WEICON Contact VA 1500 is highly viscous (1000-1500 mPa•s) and has a slower curing time. The product is suited for the bonding of rubber and plastics and can also be used on absorbent and .porous materials such as wood, cork, leather and ceramics.

  Select to compare

  Configure now
  Starting from∗ ：	8.31 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VA 8312

  WEICON

  Cyanoacrylate Adhesive for rubber and plastics, low viscosity, very fast-curing, ISEGA-certified
  WEICON Contact VA 8312 has low viscosity (20-40 mPa•s) and hardens very quickly. VA 8312 is suited for the bonding of various rubber materials such as solid rubber or cellular rubber, plastics and EDPM elastomers.
  In combination with WEICON CA-Primer, VA 8312 can also be used for polyolefines (PE-polyethylene, PP-polypropylene). In combination with WEICON Contact Filler, VA 8312 is suited for the instant bonding and filling of cracks, clefts, holes and uneven surfaces.

  Select to compare

  Configure now
  Starting from∗ ：	8.31 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VA 8406

  WEICON

  Cyanoacrylate Adhesive for rubber and plastics low viscosity, very fast-curing
  WEICON Contact VA 8406 has low viscosity (20-50 mPa•s) and hardens very quickly. It is is suited for the fast fixing and bonding of various rubber materials such as solid rubber or cellular rubber, plastics and EPDM elastomers requiring quick fixing.
  In combination with WEICON CA-Primer, VA 8406 can also be used for polyolefines (PE-polyethylene, PP-polypropylene) and for PTFE and silicones.

  Select to compare

  Configure now
  Starting from∗ ：	10.31 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VA 1460

  WEICON

  Cyanoacrylate Adhesive for special requirements, medium viscosity, longer cuing, low odour and “blooming”
  VA 1460 has a medium viscosity (120-200 mPa•s) and a reduced “blooming” effect. It hardens less quickly, is low in odour when processing and less susceptible to moisture effects after curing.
  WEICON Contact VA 1460 is suited for the bonding of the most diverse products. The product can be used in numerous industrial applications.

  Select to compare

  Configure now
  Starting from∗ ：	30.88 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VA 1403

  WEICON

  Cyanoacrylate Adhesive for special requirements, high viscosity, slow-curing, low odour and “blooming”
  WEICON Contact VA 1403 is highly viscous (1100-1800 mPa•s), low in odour when processing and has a reduced “blooming” effect. It hardens slowly and is less susceptible to moisture effects after curing.
  VA 1403 is suited for the clean and visually attractive bonding of the most diverse products.

  Select to compare

  Configure now
  Starting from∗ ：	30.88 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VA 1408

  WEICON

  Cyanoacrylate Adhesive for special requirements, low viscosity, fast-curing, low odour and “blooming”
  WEICON Contact VA 1408 has a low viscosity (20-40 mPa•s) and a reduced “blooming” effect. It hardens quickly, is low in odour when processing and less susceptible to moisture effects after curing. The product is suited for the clean and visually attractive bonding of the most diverse products.

  Select to compare

  Configure now
  Starting from∗ ：	30.88 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VM 20

  WEICON

  Cyanoacrylate Adhesive for metals, low viscosity, very fast-curing
  WEICON Contact VM 20 has a low viscosity (20-40 mPa•s) and hardens very quickly. It is suited for all types of metal bonds, especially for the bonding of precisely fitted parts in serial production.
  VM 20 can be used in the metalworking industry, in machine construction, in housing and apparatus engineering and in many other applications.

  Select to compare

  Configure now
  Starting from∗ ：	19.50 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VM 120

  WEICON

  Cyanoacrylate Adhesive for metals, medium viscosity, slower curing, a short-term realignment of parts is possible
  WEICON Contact VM 120 has a medium viscosity (100-130 mPa•s) and a longer curing time allowing short-term position corrections of the parts to be bonded.
  WEICON Contact VM 120 is suited for all types of metal bonds.
  WEICON Contact VM 120 can be used in the metalworking industry, in machine construction, in housing and apparatus engineering and in many other applications.

  Select to compare

  Configure now
  Starting from∗ ：	19.50 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VM 2000

  WEICON

  Cyanoacrylate Adhesive for metals, high viscosity, slow-curing, allows realignment of parts
  WEICON Contact VM 2000 is highly viscous (1700-2000 mPa•s) and hardens slowly, which enables position correction of the parts to be bonded.
  VM 2000 is suited for all types of metal bonds and can also be used on absorbent and porous products.

  Select to compare

  Configure now
  Starting from∗ ：	19.50 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Contact GEL

  WEICON

  Cyanoacrylate Adhesive for special requirements, pasty (highly thixotropic), very slow-curing = position correction
  Contact Gel is pasty (highly thixotropic; 60000-90000 mPa•s) and hardens very slowly. By using WEICON Activator Spray, the cure time can be reduced.
  WEICON Contact Gel is suited for porous surfaces and higher tolerance gaps and can be used on vertical surfaces. Positioning is also possible after the parts have been joined.
  WEICON Contact Gel is suited for the bonding of the most diverse products.
  WEICON Contact Gel can be used both in the hobby sector and in model building. It can also be used in many different industrial applications.

  Select to compare

  Configure now
  Starting from∗ ：	16.20 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VA 2500 HT

  WEICON

  Cyanoacrylate Adhesive for special requirements, high temperature resistant, high viscosity, slow-curing, residual elasticity after curing, high peel and impact resistance
  WEICON Contact VA 2500 HT is highly viscous (2000-3000 mPa•s) and temperature resistant between -50°C (-58°F) and +135°C (+275°F). It hardens slowly with residual elasticity and has high peel and impact
  strength. Thanks to its curing with residual elasticity, WEICON Contact VA 2500 HT is particularly suitable under changing climatic conditions. It is insensitive even under a longer influence of humidity. VA 2500 HT is suited for the bonding of the most diverse
  rubber materials and plastics and also for metal/plastic joints.

  Select to compare

  Configure now
  Starting from∗ ：	19.51 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VA 250 Black

  WEICON

  Cyanoacrylate Adhesive for special requirements, rubber-filled, high temperature resistant, high viscosity, slow-curing, residual elasticity after curing, high peel and impact resistance
  VA 250 Black is highly viscous (2000-3000 mPa•s) and temperature resistant between -50°C (-58°F) and +135°C (+275°F). It hardens slowly and with residual elasticity, is rubberfilled and black, and has high peel and impact strength.
  Thanks to its curing with residual elasticity, WEICON Contact VA 250 Black is particularly suitable under changing climatic conditions. It is insensitive even under a longer influence of humidity. It is best suited for the bonding of diverse rubber materials such as solid rubber or cellular rubber, plastics and metal/plastic joints.

  Select to compare

  Configure now
  Starting from∗ ：	19.51 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON VA 30 Black

  WEICON

  Cyanoacrylate Adhesive for special requirements, rubber-filled, high temperature resistant, medium viscosity, longer curing, residual elasticity after curing, high peel and impact resistance
  WEICON Contact VA 30 Black has medium viscosity (300 mPa•s) and is temperature resistant between -50°C (-58°F) and +135°C (+275°F). It has a longer curing time, is rubber-filled and black, hardens with residual elasticity and has high peel and impact strength. Thanks to its curing with residual elasticity, WEICON Contact VA 30 Black is particularly suitable under changing climatic conditions. It is insensitive even under a longer influence of humidity.
  VA 30 Black is ideally suited for the bonding of diverse rubber materials such as solid rubber or cellular rubber, plastics and metal/plastic joints.

  Select to compare

  Configure now
  Starting from∗ ：	19.51 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  WEICON Contact Filler

  WEICON

  Fillers for instant bonding and filling-in of clefts and cracks, holes as well as unlevelled surfaces in conjunction with WEICON Contact Adhesive VA 8312.
  Contact Filler should be applied in layers: adhesive - filler - adhesive
  After curing is completed, the material can be sanded and overpainted.

  Select to compare

  Configure now
  Starting from∗ ：	7.75 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

Loading...