BLICKLE Conveyor wheels
?* Information on days to ship and prices
-
Press-On Band, BB Series
BLICKLE
Press-On Band, with Blickle Besthane® Polyurethane Tread
Tread:- high-quality polyurethane elastomer Blickle Besthane®, hardness 92 Shore A
- very low rolling resistance
- high dynamic load capacity
- high abrasion resistance
- high cut and tear propagation resistance
- colour brown, non-marking, non-staining
- excellent chemical connection with the steel-band
- for wheel centre with outer diameter tolerance h11
- high chemical resistance to many aggressive substances
- operating temperature: -30 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C
- Greatly increased load capacity is possible for applications without obstacles.
Starting from∗ ： 70.05 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Elastic Solid Rubber Press-On Band, BEV Series
BLICKLE
Elastic Solid Rubber Press-On Band, on Steel Ring
Press-on band:- high-quality elastic solid rubber in smooth rolling quality, hardness 65 Shore A
- very good operational comfort
- low rolling resistance
- very good floor preservation, low-noise operation
- colour black
- steel-wire reinforced
- for wheel centre with outer diameter tolerance h11
- high chemical resistance to many aggressive substances, except oils
- operating temperature: -30 °C to +80 °C, temporarily up to +100 °C, reduced load capacity over +60 °C
Starting from∗ ： 78.30 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Super-Elastic Solid Rubber Tyres, BSEV Series
BLICKLE
Super-Elastic Solid Rubber Tyres
Tyre:- super-elastic solid rubber, steel-wire reinforced, hardness 70 Shore A
- very good operational comfort
- very good floor preservation, low-noise operation
- colour black
- wheel Ø 250–306 mm: 2-component tyre, highly-elastic, abrasion-resistant tread
- wheel Ø 405 mm: 3-component tyre, highly-elastic cushion layer, abrasion-resistant tread
- chemical resistance to many aggressive substances, except oils
- operating temperature: -30 °C to +80 °C, temporarily up to +100 °C, reduced load capacity over +60 °C
- tyre for installation on the standard rims specified in the table
- The tyre dimensions provided here apply to new tyres that are not bearing a load. The dimensions may change when they are in use.
Starting from∗ ： 115.09 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Press-On Band, BTH Series
BLICKLE
Press-On Band, with Blickle Extrathane® Polyurethane Tread
Tread:- high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore A
- low rolling resistance
- high abrasion resistance
- high cut and tear propagation resistance
- colour light brown, non-marking, non-staining
- excellent chemical connection with the steel-band
- for wheel centre with outer diameter tolerance h11
- high chemical resistance to many aggressive substances
- operating temperature: -30 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C
Starting from∗ ： 62.00 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Twin Flanged Wheel of Solid Steel, DSPK Series
BLICKLE
Twin Flanged Wheel of Solid Steel
Wheel:- heat-treatable steel, machined, hardness 190–230 HB
- lightly-oiled surface
- V-shaped tread (for angular steel)
- extremely low rolling resistance
- outstanding wear resistance
- extremely high static and dynamic load capacity
- chemical resistance to many aggressive substances
- operating temperature: -20 °C to +120 °C
- consider the surface pressure on sensitive floors due to high point loads
- electrical conductivity (ohmic resistance) ≤ 104 Ω
Starting from∗ ： 30.35 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Twin Flanged Wheel of Compressed Cast Nylon, DSPKGSPO Series
BLICKLE
Twin Flanged Wheel of Compressed Cast Nylon
Wheel:- high-quality cast nylon, impact resistant, hardness 80 Shore D
- V-shaped tread (for angular steel)
- very low rolling resistance
- high abrasion resistance
- colour natural beige
- high chemical resistance to many aggressive substances
- operating temperature: -20 °C to +80 °C, reduced load capacity over +35 °C
- consider the surface pressure on sensitive floors due to high point loads
Starting from∗ ： 22.47 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Roller Material |
| Lining Material |
| O.D. D(Ø) |
| Width W(mm) |
| Surface Treatment |
| Lining |
| Lining Hardness(Shore A) |
| Shaft Type |
| Bearing |
| Bearing Material |
| Load (Reference)(N) |
|
|
|
|
|
| |
| Brand | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE |
| Product Series | Twin Flanged Wheel of Compressed Cast Nylon, DSPKGSPO Series | |||||
| Starting from∗ | 70.05 € *Unit price with basic configuration | 78.30 € *Unit price with basic configuration | 115.09 € *Unit price with basic configuration | 62.00 € *Unit price with basic configuration | 30.35 € *Unit price with basic configuration | 22.47 € *Unit price with basic configuration |
| Min. Shipping Days ： | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days |
| Roller Material | Steel | Steel | - | Steel | Steel | Resin |
| Lining Material | Polyurethane | - | - | Polyurethane | - | - |
| O.D. D(Ø) | 125 ～ 645 | 125 ～ 620 | 250 ～ 525 | 125 ～ 415 | 50 ～ 200 | 50 ～ 200 |
| Width W(mm) | 40 ～ 250 | 50 ～ 300 | 85 ～ 140 | 40 ～ 130 | 18 ～ 50 | 18 ～ 50 |
| Surface Treatment | - | - | - | - | - | - |
| Lining | - | - | - | - | - | - |
| Lining Hardness(Shore A) | 92 Shore A | 65 Shore A | 70 Shore A | 92 Shore A | 190–230 HB | 80 Shore D |
| Shaft Type | - | - | - | - | - | - |
| Bearing | - | - | - | - | - | - |
| Bearing Material | - | - | - | - | - | - |
| Load (Reference)(N) | 9.81 ～ 7651.8 | 10.3 ～ 9417.6 | 11.18 ～ 8240.4 | 9.81 ～ 8829 | 9.81 ～ 7848 | 490.5 ～ 6867 |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Roller Material
-
Lining Material
- Not Lined
- Nitrile Rubber
- Polyurethane
-
O.D. D(Ø)
-
Width W(mm)
-
Surface Treatment
-
Lining
-
Lining Hardness(Shore A)
-
Shaft Type
-
Bearing
-
Bearing Material
- Steel
- Resin
- Stainless Steel
-
Load (Reference)(N)
Narrow search by specifying Brand
Narrow search by specifying CAD data type
-
- 2D
- 3D
Examples how you can use these components Test
Categories related to Conveyor wheels
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.