BLICKLE Wheels / Castors for Instrument Castors（Page 2）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Heavy Duty Drive Wheel, RVU Series
BLICKLE
Heavy Duty Drive Wheel, with Hub Keyway, with Vulkollan® Tread, with Cast Iron Wheel Centre
Tread:- high-quality polyurethane elastomer Vulkollan®, hardness 92 Shore A
- high abrasion resistance
- high cut and tear propagation resistance
- colour natural, non-marking, non-staining
- excellent chemical connection with the wheel centre
- rugged grey cast iron or ductile cast iron
- VULKOLLAN® is a registered trademark of Covestro Group
Starting from∗ ： 187.53 € Min. Shipping Days ： 23 Days *Unit price with basic configuration
-
Cast Iron Flanged Wheel, SPK Series
BLICKLE
Cast Iron Flanged Wheel
Wheel:- rugged grey cast iron, hardness 180–220 HB
- with grease nipple from wheel Ø 125 mm
- machined flange and tread
- 3° taper tread to axle
- extremely low rolling resistance
- outstanding wear resistance
- lacquered, colour silver
- chemical resistance to many aggressive substances
- operating temperature: -20 °C to +120 °C
- to be lubricated according to the application temperature
- the load capacities provided in the table refer to the allocation of flanged wheels to rail profiles in accordance with DIN 536 specified below (crane rail standard):
SPK 50G–SPK 200K, SPK 250G, SPK 250K: A45
SPK 201K, SPK 251K: A55 - electrical conductivity (ohmic resistance) ≤ 104 Ω
Starting from∗ ： 16.22 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Heavy Duty Flanged Wheels Made From Compressed Cast Nylon, SPKGSPO Series
BLICKLE
Heavy Duty Flanged Wheels Made From Compressed Cast Nylon
Wheel:- high-quality cast nylon, impact resistant, hardness 80 Shore D
- 3° taper tread to axle
- very low rolling resistance
- high abrasion resistance
- colour natural beige
- high chemical resistance to many aggressive substances
- operating temperature: -20 °C to +80 °C, reduced load capacity over +35 °C
- the load capacities provided in the table refer to the allocation of flanged wheels to rail profiles in accordance with DIN 536 specified below (crane rail standard):
SPKGSPO 50G–SPKGSPO 200K,
SPKGSPO 250K: A45
SPKGSPO 201K, SPKGSPO 251K: A55
Starting from∗ ： 56.65 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Wheel, TPA Series
BLICKLE
Wheel, with Thermoplastic Rubber Tread, with Polypropylene Wheel Centre
Tread:- high-quality thermoplastic rubber-elastomer (TPE), hardness 85 Shore A
- low rolling and swivel resistance
- colour grey, non-marking
- chemically-bonded inseparable connection with the wheel centre
- high-quality polypropylene, impact resistant
- colour silver grey
- very high chemical resistance to many aggressive substances
- operating temperature: -20 °C to +60 °C, reduced load capacity over +30 °C
- tread contains oil, may stain sensitive surfaces. alternatives: series VPA, VPP, POES, POEV, PATH
Starting from∗ ： 1.81 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Heavy Duty Hub Fitting Wheel with Super-Elastic Solid Rubber Tyres and Pressed Steel Rim, VLEA Series
BLICKLE
Heavy Duty Hub Fitting Wheel with Super-Elastic Solid Rubber Tyres and Pressed Steel Rim
Tyre:- super-elastic solid rubber, steel-wire reinforced, hardness 70 Shore A
- 3-component tyre, highly-elastic cushion layer, abrasion-resistant tread
- very good operational comfort
- very good floor preservation, low-noise operation
- colour black
- heavy pressed steel
- centre piece with a central hole and fitting holes
- fitting holes with domed anchor recesses
- zinc-plated, blue-passivated, Cr6-free
- fitted using domed anchor nuts and bolts in accordance with DIN 74361
- chemical resistance to many aggressive substances, except oils
- operating temperature: -30 °C to +80 °C, temporarily up to +100 °C, reduced load capacity over +60 °C
- The wheel and tyre dimensions provided here apply to new tyres that are not bearing a load. The dimensions may change when they are in use.
Starting from∗ ： 451.94 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Wheel, VPA Series
BLICKLE
Wheel, with Solid Rubber Tyres, with Synthetic Rim
Tyre:- high-quality solid rubber, hardness 80 Shore A
- very good operational comfort
- very good floor preservation, low-noise operation
- colour grey, non-marking, non-staining (electrically conductive version "-EL" colour black, marking)
- high-quality nylon 6 or polypropylene in the version "-EL", impact resistant
- colour black
- high chemical resistance to many aggressive substances, except oils
- operating temperature: -20 °C to +60 °C, reduced load capacity over +30 °C
Starting from∗ ： 2.99 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Wheel, VPP Series
BLICKLE
Wheel, with Standard Solid Rubber Tyre, with Synthetic Rim
Tyre:- standard solid rubber, hardness 80 Shore A
- very good operational comfort
- very good floor preservation, low-noise operation
- colour black
- high-quality polypropylene, impact resistant
- colour black
- high chemical resistance to many aggressive substances, except oils
- operating temperature: -20 °C to +60 °C, reduced load capacity over +30 °C
Starting from∗ ： 4.20 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Heavy Duty Wheel, VSVU Series
BLICKLE
Heavy Duty Wheel, with Vulkollan® Tread, with Steel Wheel Centre
Tread:- high-quality polyurethane elastomer Vulkollan®, hardness 92 Shore A
- low rolling resistance
- high dynamic load capacity
- high abrasion resistance
- high cut and tear propagation resistance
- colour natural, non-marking, non-staining
- excellent chemical connection with the wheel centre
- heat-treatable steel
- clamping surface on both sides for mechanical processing
- please note the following in terms of the mechanical processing of the base wheels:
1. the temperature of the wheel must not exceed 90 °C
2. the wheel must be fixed using the clamping surface provided
3. any change to the tread will reduce the load capacity of the wheel
- high chemical resistance to many aggressive substances
- operating temperature: -30 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C
- VULKOLLAN® is a registered trademark of Covestro Group
Starting from∗ ： 140.52 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Wheel, VWPP Series
BLICKLE
Wheel, with 'Blickle Soft' Soft Rubber Tyre, with Synthetic Rim
Tyre:- soft rubber "Blickle Soft", highly elastic, round profile, hardness 50 Shore A
- maximum operational comfort
- excellent floor preservation, particularly quiet operation
- colour black
- high-quality polypropylene, impact resistant
- colour black
- high chemical resistance to many aggressive substances, except oils
- operating temperature: -20 °C to +60 °C, reduced load capacity over +30 °C
- wheel Ø 260 mm with additional hard rubber core
- puncture-proof alternatives for pneumatic tyres
Starting from∗ ： 15.47 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Starting from∗ ： 30.13 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 9.00 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 4.17 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 6.87 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 13.83 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 9.00 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 18.09 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 23.55 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 17.01 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 21.40 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Starting from∗ ： 37.67 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Blickle Bumper Made of Polyethylene, AG Series
BLICKLE
Blickle Bumper Made of Polyethylene, AG Series- Reduced damage in collisions with walls and vehicles
- Simple assembly by affixing to the tubular frame
Starting from∗ ： 6.14 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Wheel, ALES Series
BLICKLE
Wheel, with 'Blickle Softmotion' Soft Rubber Tyre, with Aluminium Wheel Centre, Non-Marking, Grey
Tyre:- high-quality elastic solid rubber "Blickle SoftMotion", hardness 55 Shore A
- excellent floor preservation, particularly quiet operation
- low rolling resistance
- colour grey, non-marking
- vulcanised onto the wheel centre
- die-cast aluminium
- high chemical resistance to many aggressive substances, except oils
- operating temperature: -20 °C to +80 °C, temporarily up to +100 °C, reduced load capacity over +60 °C
Starting from∗ ： 90.45 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Blickle Templine® Comfort Wheel, ALSI Series
BLICKLE
Blickle Templine® Comfort Wheel, with Silicone Rubber Tread, with Aluminium Wheel Centre, Heat-Resistant
Tread:- highly heat-resistant silicone rubber, hardness 75 Shore A
- highly elastic
- very good operational comfort
- very good floor preservation, low-noise operation
- ageing resistant
- colour black
- vulcanised onto the wheel centre
- die-cast aluminium
- chemical resistance to many aggressive substances
- operating temperature: -25 °C to +250 °C
- oven temperature temporarily up to +300 °C, wheel temperature must not exceed +250 °C
Starting from∗ ： 51.41 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Heavy Duty Wheel, ALTH Series
BLICKLE
Heavy Duty Wheel, with Blickle Extrathane® Polyurethane Tread, with Aluminium Wheel Centre
Tread:- high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore A
- low rolling resistance
- high abrasion resistance
- high cut and tear propagation resistance
- colour light brown, non-marking, non-staining
- excellent chemical connection with the wheel centre
- die-cast aluminium
- high chemical resistance to many aggressive substances
- operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C
Starting from∗ ： 48.38 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Wheel, ALTPU Series
BLICKLE
Wheel, with Thermoplastic Polyurethane Tread, with Aluminium Wheel Centre, Electrically Conductive, Non-Marking
Wheel:- high-quality thermoplastic polyurethane (TPU), hardness 92 Shore A
- low rolling and swivel resistance
- high abrasion resistance
- colour dark grey, non-marking, non-staining
- operating temperature: -20 °C to +134 °C, reduced load capacity over +35 °C, abrasion-resistant
- suitable for autoclaves
- electrical conductivity (ohmic resistance) ≤ 104 Ω
Starting from∗ ： 75.40 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Blickle Bumper Made of Solid Rubber, ARG Series
BLICKLE
Blickle Bumper Made of Solid Rubber- Reduced damage in collisions with walls and vehicles
- Simple assembly by affixing to the tubular frame
Starting from∗ ： 12.92 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Blickle Bumper Made of Polyethylene, AW Series
BLICKLE
Blickle Bumper Made of Polyethylene, AW Series- Reduced damage in collisions with walls and vehicles
- Simple assembly by affixing to the tubular frame
Starting from∗ ： 6.14 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Heavy Duty Twin Wheel, DS Series
BLICKLE
Heavy Duty Twin Wheel, with Elastic Solid Rubber Tyres, with Welded Steel Wheel Centre, Heavy Duty Design- high-quality elastic solid rubber in smooth rolling quality, steel-wire reinforced, hardness 65 Shore A
- very good operational comfort
- very good floor preservation, low-noise operation
- low rolling resistance
- colour black
- very strong welded steel construction
- with twice-welded tubular steel hub
- with grease nipple
- lacquered, colour anthracite
- chemical resistance to many aggressive substances, except oils
- operating temperature: -20 °C to +80 °C, temporarily up to +100 °C, reduced load capacity over +60 °C
Starting from∗ ： 1,221.67 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Heavy Duty Wheel, GST Series
BLICKLE
Heavy Duty Wheel, with Blickle Softhane® Polyurethane Tread, with Cast Iron Wheel Centre
Tread:- high-quality polyurethane elastomer Blickle Softhane®, hardness 75 Shore A
- extra-thick elastic tread for excellent operational comfort
- very good floor preservation, low-noise operation
- low rolling resistance
- high abrasion resistance
- high cut and tear propagation resistance
- colour green, non-marking, non-staining
- excellent chemical connection with the wheel centre
- rugged grey cast iron
- with grease nipple from wheel Ø 160 mm
- lacquered, colour silver
- high chemical resistance to many aggressive substances
- operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C
Starting from∗ ： 123.77 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Rollers for Pallet Trucks, HTHW Series
BLICKLE
Rollers for Pallet Trucks, with Blickle Extrathane® Polyurethane Tread, with Steel Wheel Centre, HTHW Series
Tread:- high-quality polyurethane elastomer Blickle Extrathane®, hardness 92 Shore A
- low rolling resistance
- high abrasion resistance
- high cut and tear propagation resistance
- colour light brown, non-marking, non-staining
- excellent chemical connection with the wheel centre
- metal
- high chemical resistance to many aggressive substances
- operating temperature: -20 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C
- optimal splash and washproof for ball bearing through combination of clearance sealing and slipping sealing
Starting from∗ ： 68.78 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Wheel, P Series
BLICKLE
Wheel, with Pneumatic Tyre, with Pressed Steel Rim
Tyre:- pneumatic tyre, ribbed profile, hardness 60 Shore A
- 4-ply rating, with inner tube
- maximum operational comfort
- excellent floor preservation, particularly quiet operation
- colour black
- pressed steel
- with welded tubular steel hub
- lacquered, colour silver
- chemical resistance to many aggressive substances, except oils
- operating temperature: -20 °C to +50 °C
- the wheel and tyre dimensions provided here apply to new tyres that are not bearing a load. Their width and diameter may change when they are in use.
- speeds up to 16 km/h possible for wheels with ball bearing and reduced load capacity
Starting from∗ ： 41.67 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Wheel, PGV Series
BLICKLE
Wheel, with Elastic Solid Rubber Tyres, with Aluminium Wheel Centre, Non-Marking, Grey
Tread:- high-quality elastic solid rubber in smooth rolling quality, hardness 80 Shore A
- very good operational comfort
- very good floor preservation, low-noise operation
- low rolling resistance
- colour grey, non-marking
Wheel centre:
- die-cast aluminium, bolted
- high chemical resistance to many aggressive substances, except oils
- operating temperature: -25 °C to +134 °C, reduced load capacity over +35 °C
- suitable for autoclaves
Starting from∗ ： 113.47 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Blickle Templine® Classic Thermoset Wheel, PHN Series
BLICKLE
Blickle Templine® Classic Thermoset Wheel, Heat-Resistant
Wheel:- phenolic resin, hardness 90 Shore D
- very high static load capacity
- easy operation on smooth surfaces
- colour black
- high chemical resistance to many aggressive substances
- operating temperature: -35 °C to +260 °C
- wheels are only conditionally suitable for uneven floors and crossing thresholds
Starting from∗ ： 15.45 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Wheel, PK Series
BLICKLE
Wheel, with Pneumatic Tyre, with Synthetic Rim
Tyre:- pneumatic tyre, ribbed profile, hardness 60 Shore A
- 2-ply rating, with inner tube
- excellent floor preservation, particularly quiet operation
- colour black
- high-quality polypropylene, impact resistant
- colour red
- high chemical resistance to many aggressive substances, except oils
- operating temperature: -20 °C to +40 °C, reduced load capacity over +30 °C
- the wheel and tyre dimensions provided here apply to new tyres that are not bearing a load. Their width and diameter may change when they are in use.
Starting from∗ ： 30.21 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Nylon Wheel, PO Series
BLICKLE
Nylon Wheel, PO Series
Wheel:- high-quality nylon 6, impact resistant, hardness 70 Shore D
- excellent rolling and swivel resistance
- easy operation on smooth surfaces
- high abrasion resistance
- colour blue
- high chemical resistance to many aggressive substances
- operating temperature: -25 °C to +80 °C, reduced load capacity over +35 °C
Starting from∗ ： 2.01 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Wheel, POES Series
BLICKLE
Wheel, with 'Blickle Softmotion' Soft Rubber Tyre, with Nylon Wheel Centre, Non-Marking, Grey
Tyre:- high-quality elastic solid rubber "Blickle SoftMotion", hardness 55 Shore A
- maximum operational comfort
- excellent floor preservation, particularly quiet operation
- low rolling resistance
- colour grey, non-marking
- vulcanised onto the wheel centre
- high-quality nylon 6, impact resistant
- colour black
- with synthetic thread guard, large
- high chemical resistance to many aggressive substances, except oils
- operating temperature: -20 °C to +80 °C, temporarily up to +100 °C, reduced load capacity over +35 °C
Starting from∗ ： 24.77 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Nylon Wheel, POH Series
BLICKLE
Nylon Wheel, POH Series
Wheel:- highly heat-resistant nylon, impact resistant, hardness 85 Shore D
- excellent rolling and swivel resistance
- easy operation on smooth surfaces
- high abrasion resistance
- colour natural
- suitable for autoclaves (plain bore and version with stainless steel ball bearing with heat-resistant grease “-HXK”)
- high chemical resistance to many aggressive substances
- operating temperature: -25 °C to +170 °C
- oven temperature temporarily up to +200 °C, wheel temperature must not exceed +170 °C
Starting from∗ ： 12.58 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Blickle Templine® Performance Thermoplastic Wheel, POHI Series
BLICKLE
Blickle Templine® Performance Thermoplastic Wheel, Heat-Resistant
Wheel:- highly heat-resistant thermoplastic, impact resistant, hardness 85 Shore D
- excellent rolling and swivel resistance
- easy operation on smooth surfaces
- high abrasion resistance
- colour dark grey
- suitable for autoclaves (plain bore and version with stainless steel ball bearing with heat-resistant grease “-HXK”)
- high chemical resistance to many aggressive substances
- operating temperature: -25 °C to +250 °C
- oven temperature temporarily up to +300 °C, wheel temperature must not exceed +250 °C
Starting from∗ ： 16.90 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Blickle Templine® Comfort Wheel, POSI Series
BLICKLE
Blickle Templine® Comfort Wheel, with Silicone Rubber Tread, with Synthetic Wheel Centre, Heat-Resistant
Tread:- highly heat-resistant silicone rubber, hardness 75 Shore A
- highly elastic
- very good operational comfort
- very good floor preservation, low-noise operation
- ageing resistant
- colour black
- vulcanised onto the wheel centre
- highly heat-resistant thermoplastic, impact resistant
- colour dark grey
- very high chemical resistance to many aggressive substances
- operating temperature: -25 °C to +250 °C
- oven temperature temporarily up to +300 °C, wheel temperature must not exceed +250 °C
- suitable for autoclaves
Starting from∗ ： 41.68 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Wheel, POTH Series
BLICKLE
Wheel, with Thermoplastic Polyurethane Tread, with Heavy Duty Nylon Wheel Centre
Tread:- high-quality thermoplastic polyurethane (TPU), hardness 94 Shore A
- low rolling and swivel resistance
- high abrasion resistance
- colour dark grey, non-marking, non-staining
- chemically-bonded inseparable connection with the wheel centre
- high-quality nylon 6, impact resistant
- colour natural white
- very high chemical resistance to many aggressive substances
- operating temperature: -25 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +35 °C
Starting from∗ ： 20.37 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Nylon Wheel, POW Series
BLICKLE
Nylon Wheel, with Rubber Damping Ring, Low Noise, with Synthetic Thread Guard
Tread:- high-quality nylon 6, impact resistant, hardness 70 Shore D
- low-noise operation (-10 decibels) with elastic cushion layer made from elastic solid rubber, colour red
- easy operation on smooth surfaces
- low rolling resistance
- high abrasion resistance
- colour white
- with synthetic thread guard, large
- high chemical resistance to many aggressive substances
- operating temperature: -20 °C to +80 °C, reduced load capacity over +35 °C
Starting from∗ ： 22.88 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Polypropylene Wheel, PP Series
BLICKLE
Polypropylene Wheel, PP Series
Wheel:- high-quality polypropylene, impact resistant, hardness 60 Shore D
- low rolling and swivel resistance
- colour black
- high chemical resistance to many aggressive substances
- operating temperature: -20 °C to +60 °C, reduced load capacity over +30 °C
Starting from∗ ： 3.52 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Wheel, RD Series
BLICKLE
Wheel, with 'Blickle Comfort' Two-Component Solid Rubber Tyres, with Pressed Steel Rim
Tyre:- two-component solid rubber "Blickle Comfort", hardness 56 Shore A
- hard rubber core and highly elastic tread
- very good floor preservation, low-noise operation
- additional operational comfort and load capacity compared to standard solid rubber
- low rolling resistance
- colour grey
- pressed steel
- strong rim structure with tubular steel hub, bolted or pressed
- zinc-plated, blue-passivated, Cr6-free
- chemical resistance to many aggressive substances, except oils
- operating temperature: -25 °C to +80 °C, reduced load capacity over +60 °C
Starting from∗ ： 21.33 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Rollers for Pallet Trucks, RK-HB Series
BLICKLE
Rollers for Pallet Trucks, with Blickle Besthane® Polyurethane Tread, with Steel Wheel Centre, Without Ball Bearings
Tread:- high-quality polyurethane elastomer Blickle Besthane®, hardness 92 Shore A
- very low rolling resistance
- high dynamic load capacity
- high abrasion resistance
- high cut and tear propagation resistance
- colour brown, non-marking, non-staining
- excellent chemical connection with the wheel centre
- metal
Other features:
- high chemical resistance to many aggressive substances
- operating temperature: -25 °C to +70 °C, temporarily up to +90 °C, reduced load capacity over +40 °C
Starting from∗ ： 56.48 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Heavy Duty Wheel, SE Series
BLICKLE
Heavy Duty Wheel, with 'Blickle Easyroll' Elastic Solid Rubber Tyres, with Nylon Wheel Centre, SE Series
Tyre:- high-quality elastic solid rubber "Blickle EasyRoll" in smooth rolling quality, hardness 65 Shore A
- very good operational comfort
- very good floor preservation, low-noise operation
- low rolling resistance
- colour black
- vulcanised onto the wheel centre
- high-quality nylon 6, impact resistant, colour black, with tubular steel hub
- resistant to dirt, impact and shocks
- chemical resistance to many aggressive substances, except oils
- operating temperature: -20 °C to +80 °C, temporarily up to +100 °C, reduced load capacity over +60 °C
Starting from∗ ： 36.45 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Wheel Width (Dual-Wheel Type) × 2(mm) |
| Wheel Type |
| Wheel Material |
| Wheel O.D.(mm) |
| Wheel Width(mm) |
| Hole Diameter(mm) |
| Hub Width(mm) |
| Bearing |
| Max. Load / Allowable Load(daN) |
| Max. Load / Allowable Load(kg) |
| Wheel Material |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE | BLICKLE |
| Product Series | Heavy Duty Flanged Wheels Made From Compressed Cast Nylon, SPKGSPO Series | Blickle Templine® Performance Thermoplastic Wheel, POHI Series | |||||||||||||||||||||||||||||||||||||||||||
| Starting from∗ | 187.53 € *Unit price with basic configuration | 16.22 € *Unit price with basic configuration | 56.65 € *Unit price with basic configuration | 1.81 € *Unit price with basic configuration | 451.94 € *Unit price with basic configuration | 2.99 € *Unit price with basic configuration | 4.20 € *Unit price with basic configuration | 140.52 € *Unit price with basic configuration | 15.47 € *Unit price with basic configuration | 30.13 € *Unit price with basic configuration Volume Discount | 9.00 € *Unit price with basic configuration Volume Discount | 4.17 € *Unit price with basic configuration Volume Discount | 6.87 € *Unit price with basic configuration Volume Discount | 13.83 € *Unit price with basic configuration Volume Discount | 9.00 € *Unit price with basic configuration Volume Discount | 18.09 € *Unit price with basic configuration Volume Discount | 23.55 € *Unit price with basic configuration Volume Discount | 17.01 € *Unit price with basic configuration Volume Discount | 21.40 € *Unit price with basic configuration Volume Discount | 37.67 € *Unit price with basic configuration Volume Discount | 6.14 € *Unit price with basic configuration | 90.45 € *Unit price with basic configuration | 51.41 € *Unit price with basic configuration | 48.38 € *Unit price with basic configuration | 75.40 € *Unit price with basic configuration | 12.92 € *Unit price with basic configuration | 6.14 € *Unit price with basic configuration | 1,221.67 € *Unit price with basic configuration | 123.77 € *Unit price with basic configuration | 68.78 € *Unit price with basic configuration | 41.67 € *Unit price with basic configuration | 113.47 € *Unit price with basic configuration | 15.45 € *Unit price with basic configuration | 30.21 € *Unit price with basic configuration | 2.01 € *Unit price with basic configuration | 24.77 € *Unit price with basic configuration | 12.58 € *Unit price with basic configuration | 16.90 € *Unit price with basic configuration | 41.68 € *Unit price with basic configuration | 20.37 € *Unit price with basic configuration | 22.88 € *Unit price with basic configuration | 3.52 € *Unit price with basic configuration | 21.33 € *Unit price with basic configuration | 56.48 € *Unit price with basic configuration | 36.45 € *Unit price with basic configuration |
| Min. Shipping Days ： | 23 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 3 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days |
| Wheel Width (Dual-Wheel Type) × 2(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Wheel Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Wheel Material | Cast | Cast | Resin | Resin | Steel | Resin | Resin | Steel | Resin | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Steel | Cast | - | Steel | - | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Steel | - | Resin ～ Steel |
| Wheel O.D.(mm) | 230 ～ 250 | - | - | 50 ～ 200 | 405 ～ 525 | 50 ～ 150 | 80 ～ 400 | 125 ～ 300 | 125 ～ 260 | - | - | - | - | - | - | - | - | - | - | - | 100 ～ 125 | 150 ～ 250 | 100 | 80 ～ 250 | 120 ～ 150 | 75 ～ 125 | 100 ～ 125 | 300 ～ 500 | 125 ～ 400 | 82 ～ 85 | 180 ～ 415 | 84 ～ 186 | 80 ～ 200 | 200 ～ 400 | 50 ～ 300 | 80 ～ 200 | 80 ～ 200 | 80 ～ 200 | 100 ～ 125 | 75 ～ 250 | 100 ～ 125 | 60 ～ 200 | 100 ～ 280 | 80 ～ 85 | 80 ～ 415 |
| Wheel Width(mm) | 70 ～ 100 | 32 ～ 80 | 32 ～ 80 | 19 ～ 40 | 105 ～ 140 | 18 ～ 32 | 25 ～ 100 | 50 ～ 80 | 38 ～ 85 | - | - | - | - | - | - | - | - | - | - | - | 18 | 50 | 40 | 30 ～ 60 | 32 | 23 | 18 | - | 50 ～ 100 | 60 ～ 110 | 50 ～ 120 | 24 ～ 38 | 30 ～ 50 | 50 ～ 100 | 18 ～ 55 | 32 ～ 50 | 30 ～ 50 | 30 ～ 50 | 35 ～ 40 | 35 ～ 50 | 35 | 29 ～ 50 | 30 ～ 70 | 60 ～ 100 | 45 ～ 90 |
| Hole Diameter(mm) | - | 15 ～ 40 | 15 ～ 40 | 6 ～ 20 | - | 6 ～ 12 | 12 ～ 25 | 20 ～ 30 | 12 ～ 25 | - | - | - | - | - | - | - | - | - | - | - | - | 20 | 8 ～ 15 | 15 ～ 25 | 15 | - | - | 50 ～ 80 | 20 ～ 40 | 12 ～ 25 | 20 ～ 30 | 10 ～ 25 | 12 ～ 20 | 20 ～ 25 | 8 ～ 30 | 8 ～ 12 | 12 ～ 20 | 12 ～ 20 | 12 | 8 ～ 25 | 8 ～ 10 | 8 ～ 20 | 15 ～ 25 | - | 20 ～ 35 |
| Hub Width(mm) | - | 32 ～ 90 | 32 ～ 90 | 22 ～ 60 | - | 22 ～ 35 | 35 ～ 75 | 50 ～ 80 | 45 ～ 75 | - | - | - | - | - | - | - | - | - | - | - | - | 60 | 45 ～ 46 | 35 ～ 70 | 32 | - | - | 150 ～ 250 | 60 ～ 120 | - | 48 ～ 90 | 30 ～ 43 | 35 ～ 60 | 60 ～ 75 | 22 ～ 65 | 36 ～ 60 | 35 ～ 60 | 35 ～ 60 | 38 ～ 45 | 45 ～ 60 | 46 | 35 ～ 60 | 45 ～ 75 | - | 45 ～ 100 |
| Bearing | Other | Provided | Provided | Provided | Other | Provided | Provided | Other | Provided | - | - | - | - | - | - | - | - | - | - | - | Other | Provided | Provided | Provided | Provided | Other | Other | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Other | Provided |
| Max. Load / Allowable Load(daN) | - | 1 ～ 900 | 1.3 ～ 900 | 30 ～ 250 | 1.42 ～ 950 | 30 ～ 130 | 50 ～ 350 | 1 ～ 800 | 50 ～ 200 | 500 | 135 | 110 ～ 125 | 100 | 300 | 120 ～ 300 | 125 | 450 ～ 600 | 150 | 100 ～ 110 | 120 ～ 150 | - | 280 ～ 440 | 100 | 1 ～ 950 | 120 ～ 150 | - | - | 1.8 ～ 4.58 | 1.2 ～ 800 | 1.01 ～ 960 | 50 ～ 525 | 90 ～ 200 | 100 ～ 500 | 75 ～ 250 | 1 ～ 600 | 110 ～ 350 | 215 ～ 720 | 180 ～ 600 | 80 ～ 120 | 1 ～ 800 | 200 ～ 220 | 80 ～ 450 | 100 ～ 650 | 550 ～ 960 | 1 ～ 950 |
| Max. Load / Allowable Load(kg) | - | 1 ～ 900 | 1.3 ～ 900 | 30 ～ 250 | 1.42 ～ 950 | 30 ～ 130 | 50 ～ 350 | 1 ～ 800 | 50 ～ 200 | 500 | 135 | 110 ～ 125 | 100 | 300 | 120 ～ 300 | 125 | 450 ～ 600 | 150 | 100 ～ 110 | 120 ～ 150 | - | 280 ～ 440 | 100 | 1 ～ 950 | 120 ～ 150 | - | - | 1.8 ～ 4.58 | 1.2 ～ 800 | 1.01 ～ 960 | 50 ～ 525 | 90 ～ 200 | 100 ～ 500 | 75 ～ 250 | 1 ～ 600 | 110 ～ 350 | 215 ～ 720 | 180 ～ 600 | 80 ～ 120 | 1 ～ 800 | 200 ～ 220 | 80 ～ 450 | 100 ～ 650 | 550 ～ 960 | 1 ～ 950 |
| Wheel Material | - | - | Resin | Resin | Steel | Resin | Resin | Steel | Resin | - | - | - | - | - | - | - | - | - | - | - | Other Materials | Aluminum | Aluminum | Aluminum | Aluminum | Other Materials | Other Materials | Steel | - | Other Materials | Steel | Aluminum | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Resin | Steel | Other Materials | Steel / Resin |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Wheel Width (Dual-Wheel Type) × 2(mm)
-
Wheel Type
- Integrated
- Outer Ring + Wheel
-
Wheel Material
-
Wheel O.D.(mm)
- 25
- 32
- 35
- 38
- 40
- 50
- 50/62
- 58
- 60
- 63
- 65
- 75
- 75/100
- 80
- 82
- 83
- 84
- 85
- 90
- 100
- 100/125
- 102
- 105
- 108
- 110
- 120
- 125
- 125/145
- 126
- 127
- 130
- 140
- 150
- 150/175
- 151
- 153
- 160
- 170
- 175
- 180
- 180/210
- 186
- 200
- 200/230
- 204
- 210
- 215
- 218
- 220
- 225
- 230
- 248
- 250
- 250/300
- 251
- 253
- 254
- 255
- 257
- 260
- 265
- 270
- 280
- 286
- 290
- 291
- 294
- 295
- 300
- 305
- 306
- 310
- 340
- 343
- 350
- 360
- 380
- 400
- 405
- 410
- 415
- 420
- 425
- 450
- 455
- 460
- 500
- 520
- 525
- 536
- 550
- 600
- 610
- 620
- 700
- 750
- 1000
-
Wheel Width(mm)
- 0
- 12
- 14
- 16
- 17
- 18
- 19
- 20
- 20.5
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 32.5
- 33
- 34
- 35
- 36
- 37
- 37.5
- 38
- 39
- 40
- 42
- 43
- 43.5
- 44
- 45
- 46
- 47
- 48
- 50
- 51
- 53
- 54
- 55
- 56
- 57
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 72
- 73
- 74
- 75
- 76
- 78
- 79
- 80
- 82
- 83
- 84
- 85
- 87
- 89
- 90
- 91
- 93
- 95
- 98
- 100
- 102
- 105
- 106
- 110
- 114
- 115
- 120
- 125
- 130
- 135
- 140
- 145
- 150
- 160
- 165
- 200
- 250
- 300
-
Hole Diameter(mm)
-
Hub Width(mm)
- 0
- 14
- 16
- 18
- 20
- 20.5
- 21
- 22
- 22,5
- 22.5
- 23
- 24
- 27
- 28
- 29
- 29,5
- 30
- 31
- 31.5
- 32
- 33
- 34
- 35
- 35.5
- 35.6
- 36
- 36.5
- 37
- 37.4
- 38
- 39
- 39.6
- 40
- 41
- 41.5
- 42
- 43
- 43.5
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 51.5
- 52
- 53
- 53.5
- 54
- 55
- 56
- 57
- 58
- 58.5
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 67
- 68
- 70
- 71
- 72.5
- 74
- 75
- 76
- 78
- 80
- 81
- 82
- 83
- 85
- 88
- 89
- 90
- 91
- 92
- 94
- 95
- 97
- 98
- 99
- 100
- 102
- 108
- 114
- 115
- 120
- 125
- 130
- 140
- 150
- 160
- 170
- 200
- 220
- 250
- 280
- 300
- 330
-
Bearing
-
Max. Load / Allowable Load(daN)
- 1
- 1.01
- 1.06
- 1.07
- 1.08
- 1.1
- 1.13
- 1.14
- 1.15
- 1.2
- 1.25
- 1.27
- 1.3
- 1.35
- 1.38
- 1.4
- 1.42
- 1.5
- 1.56
- 1.6
- 1.7
- 1.75
- 1.8
- 1.83
- 1.89
- 2
- 2.1
- 2.16
- 2.2
- 2.25
- 2.28
- 2.29
- 2.3
- 2.4
- 2.5
- 2.65
- 2.7
- 2.75
- 2.8
- 3
- 3.12
- 3.15
- 3.2
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 4
- 4.2
- 4.5
- 4.54
- 4.58
- 5
- 5.1
- 5.7
- 6
- 6.7
- 7
- 7.5
- 8
- 9
- 10
- 12
- 12.5
- 15
- 18
- 20
- 22
- 25
- 30
- 40
- 45
- 50
- 60
- 65
- 70
- 75
- 80
- 90
- 95
- 100
- 110
- 115
- 120
- 125
- 130
- 135
- 140
- 150
- 160
- 170
- 171
- 175
- 180
- 200
- 205
- 215
- 220
- 225
- 230
- 240
- 250
- 260
- 270
- 275
- 280
- 295
- 299
- 300
- 310
- 320
- 325
- 340
- 350
- 360
- 370
- 380
- 385
- 400
- 420
- 440
- 450
- 460
- 475
- 480
- 500
- 510
- 525
- 530
- 540
- 550
- 560
- 570
- 580
- 590
- 600
- 610
- 620
- 630
- 640
- 650
- 660
- 670
- 675
- 690
- 700
- 720
- 730
- 740
- 750
- 770
- 780
- 800
- 810
- 820
- 830
- 850
- 870
- 875
- 900
- 910
- 920
- 950
- 960
- 975
-
Max. Load / Allowable Load(kg)
- 1
- 1.01
- 1.06
- 1.07
- 1.08
- 1.1
- 1.13
- 1.14
- 1.15
- 1.2
- 1.25
- 1.27
- 1.3
- 1.35
- 1.38
- 1.4
- 1.42
- 1.5
- 1.56
- 1.6
- 1.7
- 1.75
- 1.8
- 1.83
- 1.89
- 2
- 2.1
- 2.16
- 2.2
- 2.25
- 2.28
- 2.29
- 2.3
- 2.4
- 2.5
- 2.65
- 2.7
- 2.75
- 2.8
- 3
- 3.12
- 3.15
- 3.2
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 4
- 4.2
- 4.5
- 4.54
- 4.58
- 5
- 5.1
- 5.7
- 6
- 6.7
- 7
- 7.5
- 8
- 9
- 10
- 12
- 12.5
- 15
- 18
- 22
- 25
- 30
- 40
- 45
- 50
- 55
- 60
- 65
- 70
- 75
- 80
- 82
- 85
- 90
- 95
- 100
- 102
- 110
- 115
- 120
- 122.4
- 123
- 125
- 130
- 132.6
- 135
- 140
- 142.8
- 150
- 153.0
- 160
- 163.2
- 170
- 174
- 175
- 180
- 184
- 195
- 200
- 204
- 205
- 210
- 215
- 220
- 225
- 230
- 240
- 250
- 255
- 260
- 270
- 275
- 280
- 290
- 295
- 299
- 300
- 306
- 310
- 320
- 325
- 330
- 340
- 345
- 350
- 360
- 370
- 380
- 385
- 390
- 400
- 408
- 420
- 430
- 440
- 445
- 450
- 460
- 475
- 480
- 500
- 510
- 520
- 525
- 530
- 535
- 540
- 550
- 560
- 570
- 580
- 590
- 600
- 610
- 615
- 620
- 630
- 640
- 650
- 660
- 670
- 675
- 680
- 685
- 690
- 700
- 720
- 730
- 740
- 750
- 770
- 780
- 800
- 805
- 810
- 820
- 830
- 840
- 850
- 870
- 875
- 900
- 910
- 920
- 950
- 960
- 975
- 980
- 1000
- 1100
- 1130
- 1200
- 1250
- 1350
- 1400
- 1500
- 1600
- 2000
- 2200
- 2500
- 2800
- 3000
- 3500
- 4500
- 6000
- 7000
- 8000
- 9000
- 11000
-
Wheel Material
Narrow search by specifying Brand
-
- MISUMI (4)
- ESCO (149)
- BLICKLE (95)
- NANSIN (41)
- SISIKU ADDKREIS (40)
- GIFU SANKEN KOGYO (39)
- BS ROLLEN (27)
- TOSEI SHARYO (21)
- NORELEM (9)
- KIPP (9)
- YODONO (9)
- YUEI CASTER (9)
- TOUHOKU SHARYO (8)
- TAKIGEN(HAMMER CASTER) (7)
- TRUSCO NAKAYAMA (7)
- QUADRANT POLYPENCO JAPAN (5)
- INOAC (4)
- OHINDUSTRIAL (2)
- YAHATA NEJI (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Wheels / Castors for Instrument Castors
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.