GANTER Stainless Steel - Standard Type

?* Information on days to ship and prices

• 

  Stainless Steel-Toggle latches

  GANTER

  The outstanding features of Stainless Steel-Hook clamps GN 8330 are superior functionality and design. The integrated spring mechanism holds the locking lever and the clamping hook in the open position and allows effortless operation.
  Once the dead center is exceeded, the elasticity of the sheet metal parts will cause the hook clamp to close. In the clamped position, the required drill hole spacing is m2.
  With the stroke w of the clamping hook, the elements to be connected can be pulled together during clamping.
  The hook clamp can be secured against opening inadvertently with the so-called spring cotter pins. The spring cotter pin is placed into the d2 bore hole. Sealing is also possible via d2.
  The retaining force given in the table is a guide value for the potentially static tensile stress load acting on the hook clamp. Depending on the conditions of use (e.g. when exposed to vibrations or shock impact), the retaining force may be impaired.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	13.66 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Toggle Latches, Steel, Stainless Steel

  GANTER

  Toggle latches GN 831 are used among others for the secure holding of flaps and container lids. The clamps will lock securely over the centre and are thus vibration proof.
  The stroke w1 of the clamping hook can pull the parts to be clamped together by up to 6 mm. The range w2 can be adjusted on the M6 threaded spindle at the clamping hook.
  The types S and SV prevent unwanted release of the toggle latch.
  Screws with low head height such as DIN 6912 are used to fix the toggle latches.
  The load specified in the table are simply guide line values for a nominal static pulling force which the lock can withstand. Depending on the conditions under which these hook lock clamps are used such as vibration or shock loads, the holding capacity can be adversely affected.
  The catch bracket is included.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	10.58 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toggle latches, Steel, Stainless Steel

  GANTER

  • Volume Discount

  Starting from∗ ：	13.34 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Toggle latches, Steel

  GANTER

  The outstanding features of GN 8330 toggle latches are superior functionality and design. The integrated spring mechanism holds the locking lever and the clamping hook in the open position and allows
  effortless operation.
  Once the dead center is exceeded, the elasticity of the sheet metal parts will cause the hook clamp to close. In the clamped position, the required drill hole spacing is m2.
  With the stroke w of the clamping hook, the elements to be connected can be pulled together during clamping.
  The toggle latch can be secured against opening inadvertently with the so-called spring cotter pin. The spring cotter pin is placed into the d2 bore hole. Sealing is also possible via d2.
  The retaining force given in the table is a guide value for the potentially static tensile stress load acting on the toggle latch. Depending on the conditions of use (e.g. when exposed to vibrations or shock impact), the retaining force may be impaired.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	7.24 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Toggle latches, Steel, Stainless Steel

  GANTER

  Toggle latches GN 821 are used among others for the secure holding of flaps and container lids. The clamps will lock securely over the centre and are thus vibration proof.
  The stroke w1 of the clamping hook can pull the parts to be clamped together by up to 6 mm. The range w2 can be adjusted on the M6 threaded spindle at the clamping hook.
  The types S, SV and SS prevent unwanted release of the toggle latch.
  In the standard version the toggle latches of type SS have the same lock and / or the same key.
  The load specified in the table are simply guide line values for a nominal static pulling force which the lock can withstand. Depending on the conditions under which these toggle latches are used such as vibration or shock loads, the holding capacity can be adversely affected.
  The catch bracket is included.

  • Volume Discount

  2D / 3D CAD data available

  Starting from∗ ：	21.30 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Toggle latches, Steel / Stainless Steel, without lock mechanism

  GANTER

  • Volume Discount

  Starting from∗ ：	12.64 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

Loading...