NABEYA Jigs for Manual Tightening

?* Information on days to ship and prices

• • Promotional pricing

  

  Toggle Down Clamp 6830

  NABEYA

  [Features]
  · 6830: SS400/6830NI: SUS304, 6830: Zinc-plated toggle-down clamp 6830. 6830S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.

  Starting from∗ ：	63.76 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Vacuum Chuck

  NABEYA

  [Features]
  · Adsorption of workpieces is possible by simply supplying air from a compressor.
  · Supports non-magnetic workpieces such as aluminum, stainless steel, and copper, etc. with which a magnetic chuck cannot be used.
  · VCM0303E.
  · Supply valve can only turn the adsorption ON or OFF.
  · VCM0303S.
  · Adsorption and air blowing are both possible using the changeover switch.
  · The current adsorption force can be confirmed by vacuum pressure gauge.
  · Adsorption force can be adjusted by vacuum regulator

  Starting from∗ ：	2,454.42 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Nut Runner Clamp Large Model

  NABEYA

  A clamp bar for L-type nut runners. This product can be additionally processed by the customer.
  
  [Features]
  · Torque control and speedy clamping can be performed by using Nut Runner.
  · Quasi-hydraulic operability, no piping is required so it is handy to use.
  · Clamp bar springs up to easily attach/detach the workpiece.
  · Free from troubles such as oil leakage as it does not use oil.

  Starting from∗ ：	659.44 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Quick Lock

  NABEYA

  Annoying thread feeding when clamping is not necessary. Quick action clamp which adopts a cam lock mechanism.

  Starting from∗ ：	330.81 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Locating Pin (Adjustable Round Pin)

  NABEYA

  [Features]
  · A single wrench with the positioning repeatability of 5 μm.
  · Zero clearance with the reference hole and use of a high precision positioning pin makes it ideal for replacing plates or small-scale generalization.
  · The locating adjustment pin is a manually operated high-precision positioning pin whose diameter expands and contracts.
  · Locating adjustable pin creates zero gap.

  Starting from∗ ：	142.23 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Check Plate for Quick Lock

  NABEYA

  Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

  Starting from∗ ：	7.33 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Toggle Down Clamp 6800

  NABEYA

  [Features]
  · 6800: SS400/6800NI: SUS304, 6800: Zinc-plated toggle-down clamp 6800.
  · 6800S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.

  Starting from∗ ：	72.64 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Swing Clamp S Type

  NABEYA

  An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.

  Starting from∗ ：	60.88 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Four-Groove

  NABEYA

  Maximum tightening force: 40 kN (tightening torque: 190 N·m)

  Starting from∗ ：	2,328.79 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Screw Jack

  NABEYA

  · Attachment for No. E-9175A can be used for SJK type.
  · SJK-K type is provided with through holes in the center of the jack, making it possible to fix the jacks using bolts, etc.

  Starting from∗ ：	40.88 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Eccentric Rough Guide

  NABEYA

  A part for guiding workpieces when setting them or replacement plates, etc., to jigs. Made of resin to avoid scratching important workpieces. Variation of the workpiece can be adjusted with an eccentricity of 2 mm.

  Starting from∗ ：	18.27 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Q Lock Fast Tightening Clamp Pin

  NABEYA

  Q-lock element clamp pin (quick feed type).

  Starting from∗ ：	130.25 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Eccentric Height Cylinder

  NABEYA

  EN 1.7264 Equiv., Hardening HRC60 eccentricity height cylinder.
  Compatible bolts are M12/16.

  Starting from∗ ：	64.47 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Clamp Part of Wedge Clamp (for T-Shaped Grooves)

  NABEYA

  For the T-slot on the clamping part of the wedge clamp set. Compatible T-groove 14 mm to 22 mm, clamp stroke 6 mm. The workpiece contact surface is a flat type. The manufacturer also sells the clamp part only.

  Starting from∗ ：	195.85 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Wedge Clamp Set (for T-Shaped Grooves)

  NABEYA

  Wedge clamp set for T-grooves, flat type.

  Starting from∗ ：	320.13 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Base Unit 7110F

  NABEYA

  It is the base part of the Clamp Unit 7110 series. By combining various parts (spacers and supports), the height can be adjusted to suit the workpiece.

  Starting from∗ ：	548.14 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Universal Clamp

  NABEYA

  It can steplessly fasten tall and short workpieces.

  Starting from∗ ：	110.57 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Side Jack E Type

  NABEYA

  [Features]
  · Simply insert into the T-groove.
  · Useful for receiving cutting resistance from the side.
  · Especially for large processing machines

  Starting from∗ ：	343.67 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Toe Adjusting Clamp

  NABEYA

  [Features]
  · Tightening is performed while pressing the movable part downward, preventing the workpiece from lifting.
  · Lifting prevention (generates force in the downward direction).
  · Ideal for thin workpieces.
  · Dovetail groove can withstand lateral force.
  · Free Mounting Position

  Starting from∗ ：	427.55 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Low Edge Clamp (Double Sided Type)

  NABEYA

  It is a compact clamp that does not lift much. Ideal for machining thin, low-profile objects. There are three sizes of tightening bolts: M4, M6, and M12. It has a compact size and large stroke of 0.3 to 1.1. The guide groove of the main body shortens workpiece setup time (excluding LWC4). It has a structure that prevents chips from entering inside.

  Starting from∗ ：	35.73 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Heavy Duty Toggle Side Clamp 6845

  NABEYA

  Can be used for either pushing or pulling. Clamping screw and rubber cap attached.

  Starting from∗ ：	156.86 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Heavy Duty Toggle Hook Clamp 6849PH

  NABEYA

  Heavy-duty type hook clamp. The hook length can be adjusted.

  Starting from∗ ：	351.08 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Clamp Support Screw Jack

  NABEYA

  Clamp support screw jack is convenient for supporting a variety of clamps. When one unit is insufficient in operation or height, two or three units can be stacked together. (Only for same sizes) The attachment is convenient for supporting irregular objects.

  Starting from∗ ：	53.36 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Wedge Clamp Stopper Part (for T-Shaped Grooves)

  NABEYA

  It is for the T-groove of the stopper part of the wedge clamp set. Compatible T-groove 14 mm to 22 mm, Workpiece contact surface can be selected from 3 types: flat, step, universal type. The manufacturer also sell the stopper part only.

  Starting from∗ ：	123.03 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Wedge Clamp Stopper Part (for Tapped Holes)

  NABEYA

  Wedge clamp, stopper tapped hole, flat type.

  Starting from∗ ：	114.56 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Toggle Hook Clamp 6847

  NABEYA

  Suitable for tightening drum and can lids. The hook length can be adjusted.

  Starting from∗ ：	149.33 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Draw Clamp

  NABEYA

  The workpiece is fixed in place by pulling it in from below. Minimal interference with the blade, ideal for 5-axis and composite machine clamps.

  Starting from∗ ：	88.47 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Heavy Duty Toggle Side Clamp 6842

  NABEYA

  Can be used for either pushing or pulling. Clamping screw and rubber cap attached.

  Starting from∗ ：	184.17 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Adjusting Clamp

  NABEYA

  Standard T-slot bolted clamp.

  Starting from∗ ：	108.53 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Atlas Screw Jack

  NABEYA

  Convenient for fixing workpieces thanks to its widened base and lengthened screw.

  Starting from∗ ：	334.26 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Heavy Type Screw Jack

  NABEYA

  A screw jack for large workpieces. The manufacturer has a product lineup with a maximum load capacity of 40 KN to 80 KN and a minimum height of 200 mm to a maximum of 1,250 mm.

  Starting from∗ ：	1,114.20 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Q Lock (Screw Type) Clamp Bushing

  NABEYA

  A two-sided restraint type jig setup element that provides high speed, high precision, and high rigidity, for the replacement and positioning of jigs. It can be incorporated into an existing jig. Can be used for the automatic replacement of jigs.

  Starting from∗ ：	119.33 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Multi Auto-Clamp, Guide Bar Type [Serial], Return Mechanism Type

  NABEYA

  Significantly reduces mounting jig changes which accompany workpiece changes, helping to reduce production costs and shorten construction periods.

  Starting from∗ ：	217.57 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Aluminum Base Jack

  NABEYA

  Chips bite into in the aluminum base, leaving no scratches on the machine table. Lightweight as it is made of aluminum.

  Starting from∗ ：	174.62 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Arm Clamp

  NABEYA

  Forged S45C/hardened HRC45 arm clamp.

  Starting from∗ ：	73.36 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Quick Hold Down Clamp

  NABEYA

  Flat jaw and angled handle for quick hold down clamp (medium).

  Starting from∗ ：	330.25 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Bar for Quick Lock

  NABEYA

  [Features]
  · Bar for Quick Lock.
  · Annoying thread feeding when clamping is not necessary.
  · A one-action clamp that adopts a cam lock mechanism

  Starting from∗ ：	53.81 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Swing Clamp Holder S Type

  NABEYA

  An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.

  Starting from∗ ：	26.83 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Swing Clamp Height Adjusting Support

  NABEYA

  Of course, it can also be used for height adjustment in fixing workpieces. It can be used for both T-grooves and tap holes.

  Starting from∗ ：	102.02 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Double Swing Clamp S Type

  NABEYA

  This product can clamp 2 workpieces at the same time. Due to its compact structure (cylinder diameter 10 mm to 30 mm), it can be used in small spaces. The freely rotating structure saves time when loading and unloading the workpieces.

  Starting from∗ ：	84.55 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toe Adjusting Clamp TCH Type

  NABEYA

  Tightening is performed while pressing the movable part downward, preventing the workpiece from lifting.

  Starting from∗ ：	312.30 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Toggle Side Clamp 6844

  NABEYA

  6844: SS400/6844NI: SUS304/6844: Zinc-plated toggle side clamp 6844.

  Starting from∗ ：	188.19 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Base Unit 7110FA

  NABEYA

  It will be the base part of the Clamp Unit 7111 series. By combining various parts (spacers and supports), the height can be adjusted to suit the workpiece.

  Starting from∗ ：	1,019.75 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Hold Clamp, Stopper

  NABEYA

  Includes a hex wrench. Completely tightened with a sliding mechanism. Saves time thanks to its "one point" fitting and removal function. For machining the whole top surface of the workpiece and through-hole machining. Fully heat-treated for semi-permanent use. A workpiece rising prevention mechanism type.

  Starting from∗ ：	190.51 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Hold Clamp Set

  NABEYA

  Includes a hex wrench. Completely tightened with a sliding mechanism. Saves time thanks to its "one point" fitting and removal function. For machining the whole top surface of the workpiece and through-hole machining. Fully heat-treated for semi-permanent use. A workpiece rising prevention mechanism type.

  Starting from∗ ：	329.87 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

Loading...