NABEYA Jigs for Manual Tightening

?* Information on days to ship and prices

• 

  Toggle Down Clamp 6832

  NABEYA

  [Features]
  · SS400/galvanized toggle down clamp 6832.
  · 6832S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.

  Starting from∗ ：	66.26 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toggle Down Clamp 6830

  NABEYA

  [Features]
  · 6830: SS400/6830NI: SUS304, 6830: Zinc-plated toggle-down clamp 6830. 6830S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.

  • Volume Discount

  Starting from∗ ：	47.53 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Vacuum Chuck

  NABEYA

  [Features]
  · Adsorption of workpieces is possible by simply supplying air from a compressor.
  · Supports non-magnetic workpieces such as aluminum, stainless steel, and copper, etc. with which a magnetic chuck cannot be used.
  · VCM0303E.
  · Supply valve can only turn the adsorption ON or OFF.
  · VCM0303S.
  · Adsorption and air blowing are both possible using the changeover switch.
  · The current adsorption force can be confirmed by vacuum pressure gauge.
  · Adsorption force can be adjusted by vacuum regulator

  Starting from∗ ：	2,454.42 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Toggle Side Clamp 6844

  NABEYA

  6844: SS400/6844NI: SUS304/6844: Zinc-plated toggle side clamp 6844.

  Starting from∗ ：	155.91 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Start Element 7110FT

  NABEYA

  S45C / quenched base unit low type (for T slot).

  Starting from∗ ：	339.86 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Toggle Side Clamp 6841

  NABEYA

  6841: SS400, 6841NI: SUS304/6841: Zinc-plated toggle side clamp 6841.

  Starting from∗ ：	129.93 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Heavy Duty Toggle Side Clamp 6842

  NABEYA

  Can be used for either pushing or pulling. Clamping screw and rubber cap attached.

  Starting from∗ ：	184.17 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Nut Runner Clamp Large Model

  NABEYA

  A clamp bar for L-type nut runners. This product can be additionally processed by the customer.
  
  [Features]
  · Torque control and speedy clamping can be performed by using Nut Runner.
  · Quasi-hydraulic operability, no piping is required so it is handy to use.
  · Clamp bar springs up to easily attach/detach the workpiece.
  · Free from troubles such as oil leakage as it does not use oil.

  Starting from∗ ：	659.44 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Screw Jack

  NABEYA

  · Attachment for No. E-9175A can be used for SJK type.
  · SJK-K type is provided with through holes in the center of the jack, making it possible to fix the jacks using bolts, etc.

  • Volume Discount

  Starting from∗ ：	33.86 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Height Cylinder

  NABEYA

  SCM 420/11279-08002 to 08020: Quenched HRC57 ±3/11279-10002 to 51150: Quenched HRC60 ±3 height cylinder.

  • Volume Discount

  Starting from∗ ：	31.82 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  T-Slot Block

  NABEYA

  Convenient for clamp table and raising blocks of large machinery workpieces.

  Starting from∗ ：	699.84 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Flex Support

  NABEYA

  Easily supports and clamps unstable workpieces that are measured with a 3D measuring machine: 169 support pins support complex three-dimensional curved surfaces, shortening changeover time. The support pin can be fixed with a single clamp lever, and the clamp position can be freely adjusted vertically and laterally according to the workpiece shape. . Can also be used for long workpieces by using multiple units.

  Starting from∗ ：	818.59 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Magnetic Chucks Attachment Set

  NABEYA

  Metal fittings for fixing magnetic chucks to tables.

  Starting from∗ ：	130.56 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Wedge Clamp Set (for T-Shaped Grooves)

  NABEYA

  Wedge clamp set for T-grooves, flat type.

  Starting from∗ ：	320.13 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toe Adjusting Clamp TCH Type

  NABEYA

  Tightening is performed while pressing the movable part downward, preventing the workpiece from lifting.

  Starting from∗ ：	258.73 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Universal Clamp

  NABEYA

  It can steplessly fasten tall and short workpieces.

  • Volume Discount

  Starting from∗ ：	110.57 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Swing Clamp S Type

  NABEYA

  An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.

  • Volume Discount

  Starting from∗ ：	60.88 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toe Adjusting Clamp

  NABEYA

  [Features]
  · Tightening is performed while pressing the movable part downward, preventing the workpiece from lifting.
  · Lifting prevention (generates force in the downward direction).
  · Ideal for thin workpieces.
  · Dovetail groove can withstand lateral force.
  · Free Mounting Position

  Starting from∗ ：	427.55 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Toggle Down Clamp 6800

  NABEYA

  [Features]
  · 6800: SS400/6800NI: SUS304, 6800: Zinc-plated toggle-down clamp 6800.
  · 6800S: The structure prevents operation unless holding the safety lever, preventing erroneous operation and malfunction.

  Starting from∗ ：	72.64 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Toggle Down Clamp 6803

  NABEYA

  [Features]
  · SS400 and galvanized toggle down clamp 6803.
  · 6803S: Since it has a structure where it cannot be operated unless the safety lever is gripped, it prevents error operation and malfunction.

  • Volume Discount

  Starting from∗ ：	99.55 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Low Edge Clamp (Double Sided Type)

  NABEYA

  It is a compact clamp that does not lift much. Ideal for machining thin, low-profile objects. There are three sizes of tightening bolts: M4, M6, and M12. It has a compact size and large stroke of 0.3 to 1.1. The guide groove of the main body shortens workpiece setup time (excluding LWC4). It has a structure that prevents chips from entering inside.

  • Volume Discount

  Starting from∗ ：	35.73 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Quick Hold Down Clamp

  NABEYA

  Can be selected from T-slot nut (T-groove type) / T-slot nut (tapped hole type).

  Starting from∗ ：	161.45 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Oil Cup for Quick Lock

  NABEYA

  Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

  • Volume Discount

  Starting from∗ ：	5.47 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Wedge Clamp Stopper Part (for Tapped Holes)

  NABEYA

  Wedge clamp, stopper tapped hole, flat type.

  Starting from∗ ：	114.56 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Attachment for Aluminum Jack

  NABEYA

  Attachment for A5056 aluminum jack.

  • Volume Discount

  Starting from∗ ：	17.88 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Swing Clamp Set S Type

  NABEYA

  An inexpensive, compact clamp. The free swivel makes it easy to attach and detach workpieces.

  • Volume Discount

  Starting from∗ ：	69.30 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Universal Clamp Semi-Cylindrical Sealing Washer

  NABEYA

  [Features]
  · Parts for universal clamps.
  · The swivel pad fits on the workpiece and clamping surface for vertical tightening.
  · Although this product is equipped with T-nuts, it can also be used with them removed

  • Volume Discount

  Starting from∗ ：	17.29 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Adjusting Clamp

  NABEYA

  Standard T-slot bolted clamp.

  Starting from∗ ：	105.57 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Atlas Screw Jack

  NABEYA

  Convenient for fixing workpieces thanks to its widened base and lengthened screw.

  Starting from∗ ：	334.26 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Height Setting Jack

  NABEYA

  With a hole at the upper center. (φ12) E-756 Attachment for jack can be used in combination. Bearing is embedded in thread component.

  Starting from∗ ：	455.41 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Injeck Clamp

  NABEYA

  [Features]
  · The body is made of bainite cast iron and does not get damaged even in excessive tightening.
  · Can also be used for metal press clamps and the metal working clamps of injection molding machines.
  · If a T-slot nut is used, then of course it can also be used with T-groove tables

  • Volume Discount

  Starting from∗ ：	44.79 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stopper Block

  NABEYA

  For positioning the workpiece, pushing laterally, etc.

  • Volume Discount

  Starting from∗ ：	35.09 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Reference Seat (Round Seat)

  NABEYA

  Material is EN 1.7264 Equiv., Heat treatment is Hardening HRC60±3, and Surface treatment is black oxide coating, Standard seat (round seat).

  • Volume Discount

  Starting from∗ ：	66.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rough Guide L-Plate for Q Lock

  NABEYA

  The jig plate with the Q-lock element attached enables quick and easy replacement. Good workability due to large guide part. Mounts onto the top surfaces of the mother jig for minimal interference with surroundings.

  • Volume Discount

  Starting from∗ ：	43.87 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Rough Guide for Q Lock (Side Type)

  NABEYA

  The jig plate with the Q-lock element attached enables quick and easy replacement. Made of MC nylon so does not scratch the jig pallet. As it is located outside the jig, it is easy to attach the jig.

  Starting from∗ ：	130.64 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Rough Guide Pin for Q Lock (Side Type)

  NABEYA

  The jig plate with the Q-lock element attached enables quick and easy replacement. Placed inside the jig to prevent interference with surrounding objects.

  • Volume Discount

  Starting from∗ ：	52.68 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Height Cylinder for Q Lock

  NABEYA

  Install it between the pitches of the Q-lock element to prevent deflection and chattering of the jig base.

  • Volume Discount

  Starting from∗ ：	55.12 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Locating Pin (Ball DLC)

  NABEYA

  Compared with chamfering pins, galling is less likely to occur during insertion, making it ideal for use as a positioning pin for robot jigs or workpieces. The 1 mm width around the reference plane enables stable positioning. The reference surface is given a DLC (Diamond-Like Carbon) coating, providing excellent abrasion resistance.

  • Volume Discount

  Starting from∗ ：	75.55 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Eccentric Height Cylinder

  NABEYA

  EN 1.7264 Equiv., Hardening HRC60 eccentricity height cylinder.
  Compatible bolts are M12/16.

  • Volume Discount

  Starting from∗ ：	64.47 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Mag Side Stopper

  NABEYA

  A side stopper for use with magnetic chucks.

  Starting from∗ ：	147.62 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Aluminum Base Jack

  NABEYA

  Chips bite into in the aluminum base, leaving no scratches on the machine table. Lightweight as it is made of aluminum.

  Starting from∗ ：	174.62 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Arm Clamp

  NABEYA

  Forged S45C/hardened HRC45 arm clamp.

  • Volume Discount

  Starting from∗ ：	73.36 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Quick Hold Down Clamp

  NABEYA

  Flat jaw and angled handle for quick hold down clamp (medium).

  Starting from∗ ：	330.25 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Bar for Quick Lock

  NABEYA

  [Features]
  · Bar for Quick Lock.
  · Annoying thread feeding when clamping is not necessary.
  · A one-action clamp that adopts a cam lock mechanism

  • Volume Discount

  Starting from∗ ：	36.29 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Check Plate for Quick Lock

  NABEYA

  Parts for quick lock. Quick Lock is a one-action clamp product that does not feed screws. Reduces troublesome hand tighten work time. Each part is also sold separately.

  • Volume Discount

  Starting from∗ ：	5.06 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

Loading...