NISSIN SANGYO Tooling
Search by sub-category
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Centering Gauge
NISSIN SANGYO
Centering gauge, a centering classic. Additionally, three-dimensional measurement such as inner diameter, outer diameter, steps and circles can be performed at high accuracy.
When the probe is mounted onto the spindle and then brought into contact with the workpiece, the LED emits light and measurement can be done easily.- Volume Discount
Starting from∗ ： 256.76 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Tool Setter i
NISSIN SANGYO
Blade position with cutting tool diameter of φ0.05 mm can be detected. Machine-mounted tool length measurement instrument for high-speed spindle type machining center.
[Features]
· Developed for machining centers with ceramic spindles.
· Can also be used for non-conductive workpieces because of the internal contact system.
· Uses scratch-resistant ceramic for the cutting edge detection part. High-luminosity LED (blue) notifies the user of position detection.
· A magnet is attached to the bottom to support both vertical and horizontal use.Starting from∗ ： 640.77 € Min. Shipping Days ： 11 Days *Unit price with basic configuration
-
Non-Magnetic Small Point Finder i
NISSIN SANGYO
Used exclusively for small, high speed machining centers.
[Features]
· It can also be used for compact high-speed machining centers for molding mobile phones and digital appliances.
· It can be used with a ceramic spindle and has a nonmagnetic stylus, so there are no measurement errors due to magnetic forceStarting from∗ ： 1,506.37 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Tool Setter - Internal Contact Type (Supports Non-Conductive Workpieces)
NISSIN SANGYO
An ultra-precise tool setter with a detection accuracy of 1 μm.
[Features]
· An ultra-precise tool setter with a detection accuracy of 1 μm.
· Uses scratch-resistant ceramic for the cutting edge detection part.
· Ideal for detecting the position of the cutting edges of small diameter drills and end mills.
· Adopts an internal contact system that can be used for non-conductive workpieces and machining centers with ceramic spindles.
· Magnet on base plate.
· Can be used with both vertical and horizontal types.- Volume Discount
Starting from∗ ： 637.01 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Non-Magnetic Buzzer Specification Point Finder
NISSIN SANGYO
[Features]
· The LED will light with a small contact pressure of 0.1 gf between the stylus and the workpiece.
· Accurate measurement, even on thin workpieces.
· Includes buzzer with simultaneous electronic sound and LED to provide notification of position detection.
· Safe design that allows the stylus to swing in X/Y/Z directions.
· The measurement accuracy of metals and nonferrous metals has been dramatically improvedStarting from∗ ： 662.98 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Non-Magnetic Small Point Finder
NISSIN SANGYO
Used exclusively for small, high speed machining centers.
[Features]
· It can also be used for compact high-speed machining centers for molding mobile phones and digital appliances.
· It can be used with a ceramic spindle and has a nonmagnetic stylus, so there are no measurement errors due to magnetic forceStarting from∗ ： 931.94 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Non-Magnetic Point Finder Stylus
NISSIN SANGYO
The non-magnetic carbide stylus has been crafted using our unique production method. Technology that owes its existence to the total comprehension of work sites.
[Features]
· It is not subject to measurement error due to the influence of magnetic force.
· No need to demagnetize or replace the stylus.
· No rusting.
· Low-temperature welding, preventing thermal stress.
· Economical with the same price as a general stylus.- Volume Discount
Starting from∗ ： 179.75 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
For Non-Magnetic Stylus Center Ring Gauge Swing Type
NISSIN SANGYO
● There is no measurement error due to magnetism.
● Demagnetized, so there is no need to replace styluses, which improves work efficiency.
● Permeability (μ) ≤ 1.01 → Non-Magnetic
● Sphericity: Within 0.6 μm
● Hardness: HRA 92
● Specific Electrical Resistance: 3.2 μΩ (1/3 that of Iron)
● Wire Expansion Coefficient: 1.2 x 10-6 (1/10 that of Iron)
● No Rusting
● Unique low-temperature welding technology does not crack easily, and there is no residual inside stress, so deterioration does not occur due to aging.
● Economical with the same price as a general stylus.- Volume Discount
Starting from∗ ： 211.56 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Product Category |
| Applicable Manufacturing Machinery (main unit) |
| Spindle types |
| HSK type |
| Tool Type |
| Retainable blade diameter(mm) |
| Chuck Type |
| Holder Length L(mm) |
| Maximum Allowable Rotational Speed(min-1) |
| Coolant System |
|
|
|
|
|
|
|
| |
| Brand | NISSIN SANGYO | NISSIN SANGYO | NISSIN SANGYO | NISSIN SANGYO | NISSIN SANGYO | NISSIN SANGYO | NISSIN SANGYO | NISSIN SANGYO |
| Product Series | Tool Setter - Internal Contact Type (Supports Non-Conductive Workpieces) | |||||||
| Starting from∗ | 256.76 € *Unit price with basic configuration Volume Discount | 640.77 € *Unit price with basic configuration | 1,506.37 € *Unit price with basic configuration | 637.01 € *Unit price with basic configuration Volume Discount | 662.98 € *Unit price with basic configuration | 931.94 € *Unit price with basic configuration | 179.75 € *Unit price with basic configuration Volume Discount | 211.56 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days ： | 7 Days | 11 Days | 7 Days | 8 Days | 7 Days | 7 Days | 5 Days | 8 Days |
| Product Category | Measuring equipment | Measuring equipment | Measuring equipment | Measuring equipment | Measuring equipment | Measuring equipment | Measuring equipment | Measuring equipment |
| Applicable Manufacturing Machinery (main unit) | Machining Centers | - | - | - | - | - | - | - |
| Spindle types | - | - | - | - | BT30 / BT40 | - | - | - |
| HSK type | - | - | - | - | - | - | - | - |
| Tool Type | - | - | - | - | - | - | - | - |
| Retainable blade diameter(mm) | - | - | - | - | - | - | - | - |
| Chuck Type | - | - | - | - | - | - | - | - |
| Holder Length L(mm) | - | - | - | - | - | - | - | - |
| Maximum Allowable Rotational Speed(min-1) | - | - | - | - | - | - | - | - |
| Coolant System | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Product Category
- Main Body
- Attachments/Accessories
- Heating and Cooling Equipment
- Measuring equipment
-
Applicable Manufacturing Machinery (main unit)
- Machining Centers
- Generic Machine
- NC Lathe
-
Spindle types
-
HSK type
-
Tool Type
- End Mill
- Drill
- Reamer
- Facemill
- Tap
- Boring
-
Retainable blade diameter(mm)
- 0.25～0.50
- 0.25 to 6
- 0.25～ 6
- 0.3~3
- 0.3～8
- 0.45 ～0.55
- 0.45～3.25
- 0.45～4.05
- 0.45～6.05
- 0.5 to 0.6
- 0.50 to 0.75
- 0.5 to 0.75
- 0.5～3.175
- 0.5～5.0
- 0.5～ 6
- 0.5～6.5
- 0.5～7
- 0.5～7.0
- 0.5 to 8
- 0.5 ～ 8
- 0.5～8
- 0.5～ 8
- 0.5–10
- 0.5～10.0
- 0.5～13
- 0.5～13.0
- 0.5～16.0
- 0.55 ～0.65
- 0.6–0.8
- 0.65 ～0.75
- 0.7～6.0
- 0.7～6
- 0.75 ～0.85
- 0.75～1.0
- 0.75～1.00
- 0.8 to 1
- 0.85 ～0.95
- 0.95 ～1.05
- 1
- 1.0～0.5
- 1.0~1.25
- 1.00～1.25
- 1 to 1.5
- 1.0~6.0
- 1–7
- 1.0～8.0
- 1 to 13
- 1.05 ～1.15
- 1.15 ～1.25
- 1.25 ～1.35
- 1.25～1.5
- 1.25～1.50
- 1.35 ～1.45
- 1.4 to 1.5
- 1.45 ～1.55
- 1.5
- 1.5～1.0
- 1.50～1.75
- 1.5～1.75
- 1.5~2
- 1.5 to 10
- 1.5 ～10
- 1.5～20.0
- 1.55 ～1.65
- 1.65 ～1.75
- 1.75 ～1.85
- 1.75～2.0
- 1.75～2.00
- 1.75～10.0
- 1.75～10
- 1.85 ～1.95
- 1.95 ～2.05
- 2
- 2.0～1.5
- 2.00～2.25
- 2.0～2.25
- 2~2.5
- 2–8
- 2.0～10.0
- 2.05 ～2.15
- 2.15 ～2.25
- 2.25 ～2.35
- 2.25～2.5
- 2.25～2.50
- 2.35 ～2.45
- 2.4～2.5
- 2.45 ～2.55
- 2.5
- 2.5 to 2.0
- 2.50～2.75
- 2.5～2.75
- 2.5–3.0
- 2.5–3
- 2.5–4
- 2.5～12
- 2.5 to 13
- 2.5 ～13
- 2.5～13
- 2.5 to 16
- 2.5 ～16
- 2.5～16.0
- 2.5 to 20
- 2.5 ～20
- 2.5～20.0
- 2.5～20
- 2.55 ～2.65
- 2.65 ～2.75
- 2.675～3.175
- 2.7～3.175
- 2.75 ～2.85
- 2.75～3.0
- 2.75～3.00
- 2.75～3.25
- 2.75～13.0
- 2.75～16.0
- 2.75～16
- 2.85 ～2.95
- 2.9～3.0
- 2.925～3.175
- 2.95 ～3.05
- 2.95～3.05
- 2.95 to 8.05
- 2.95～8.05
- 3
- 3.0～2.5
- 3.00～3.25
- 3~3.5
- 3.0–3.5
- 3.0〜 3.5
- 3–4
- 3–6
- 3.0–6.0
- 3～ 6
- 3～ 8
- 3–10
- 3.0～10.0
- 3 to 12
- 3.0～12.5
- 3.0～13.0
- 3 to 16
- 3.0～16.0
- M3～M16
- 3.0~20.0
- 3.05 ～3.15
- 3.05～3.15
- 3.125～3.225
- 3.15 ～3.25
- 3.15～3.25
- 3.175
- 3.25 ～3.35
- 3.25～3.35
- 3.25～3.50
- 3.25～3.75
- 3.35 ～3.45
- 3.35～3.45
- 3.4~3.5
- 3.40～3.50
- 3.45 ～3.55
- 3.45～3.55
- 3.5
- 3.5～3.0
- 3.50～3.75
- 3.5～4.0
- 3.5〜 4.0
- 3.5~16
- 3.5～20.0
- 3.5～22
- 3.55 ～3.65
- 3.55～3.65
- 3.65 ～3.75
- 3.65～3.75
- 3.75 ～3.85
- 3.75～3.85
- 3.75～4.00
- 3.75～4.25
- 3.75～ 4.25
- 3.85 ～3.95
- 3.85～3.95
- 3.9～4.0
- 3.90～4.00
- 3.95 ～4.05
- 3.95～4.05
- 4
- 4.0～3.5
- 4.00～4.25
- 4~4.5
- 4.0–4.5
- 4.0〜 4.5
- 4–5
- 4–6
- 4 to 12
- 4.0~20.0
- 4–20
- 4.05 ～4.15
- 4.05～4.15
- 4.15 ～4.25
- 4.15～4.25
- 4.25 ～4.35
- 4.25～4.35
- 4.25～4.50
- 4.25～4.75
- 4.25～ 4.75
- 4.35 ～4.45
- 4.35～4.45
- 4.4～4.5
- 4.40～4.50
- 4.45 ～4.55
- 4.45～4.55
- 4.5～4.0
- 4.50～4.75
- 4.5–5.0
- 4.5〜 5.0
- 4.55 ～4.65
- 4.55～4.65
- 4.65 ～4.75
- 4.65～4.75
- 4.7125～4.8125
- 4.75 ～4.85
- 4.75～4.85
- 4.75～5.00
- 4.75 to 5.25
- 4.85 ～4.95
- 4.85～4.95
- 4.9~5.0
- 4.90～5.00
- 4.95 ～5.05
- 4.95～5.05
- 5
- 5.0～4.0
- 5.0～4.5
- 5.00～5.25
- 5.0～5.5
- 5～5.5
- 5.0〜 5.5
- 5–6
- 5.0～25.0
- 5.0～32.0
- 5.05 ～5.15
- 5.05～5.15
- 5.15 ～5.25
- 5.15～5.25
- 5.25 ～5.35
- 5.25～5.35
- 5.25～5.50
- 5.25～5.75
- 5.35 ～5.45
- 5.35～5.45
- 5.4～5.5
- 5.40～5.50
- 5.45 ～5.55
- 5.45～5.55
- 5.5
- 5.5～5.0
- 5.50～5.75
- 5.5 to 6.0
- 5.5–6.0
- 5.5〜 6.0
- 5.55 ～5.65
- 5.55～5.65
- 5.65 ～5.75
- 5.65～5.75
- 5.75 ～5.85
- 5.75～5.85
- 5.75～6.00
- 5.85 ～5.95
- 5.85～5.95
- 5.9～6.0
- 5.90～6.00
- 5.95 ～6.05
- 5.95～6.05
- 6
- 6.0～5.0
- 6.0～5.5
- 6 to 6.5
- 6.0–6.5
- 6.0〜 6.5
- 6–7
- 6–8
- 6.0～25.0
- 6.05～6.15
- 6.15～6.25
- 6.2
- 6.25～6.35
- 6.35～6.45
- 6.4～6.5
- 6.45～6.55
- 6.5～6.0
- 6.5 to 7.0
- 6.5〜 7
- 6.55～6.65
- 6.65～6.75
- 6.75～6.85
- 6.85～6.95
- 6.9～7.0
- 6.95～7.05
- 7
- 7.0～6.0
- 7.0～6.5
- 7.0～7.5
- 7～7.5
- 7–8
- 7.0〜 8.0
- 7.05～7.15
- 7.15～7.25
- 7.25～7.35
- 7.35～7.45
- 7.4～7.5
- 7.45～7.55
- 7.5
- 7.5～8.0
- 7.5～25.4
- 7.55～7.65
- 7.65～7.75
- 7.75～7.85
- 7.85～7.95
- 7.9～8.0
- 7.95～8.05
- 8
- 8.0～7.0
- 8~8.5
- 8.0～8.5
- 8–9
- 8.0〜 9.0
- 8–10
- 8～25.4
- 8.4～8.5
- 8.5
- 8.5～9.0
- 8.9～9.0
- 9
- 9.0～8.0
- 9.0～9.5
- 9～9.5
- 9–10
- 9.0〜10.0
- 9.4～9.5
- 9.5 to 10.0
- 9.9～10.0
- 10
- 10.0～9.0
- 10.0 ～10.5
- 10.0～10.5
- 10～10.5
- 10~11
- 10.0〜11.0
- 10–12
- 10–16
- 10–20
- 10.4~10.5
- 10.5
- 10.5～11.0
- 10.9～11.0
- 11
- 11.0～10.0
- 11.0～11.5
- 11～11.5
- 11~12
- 11.0〜12.0
- 11–13
- 11.4～11.5
- 11.5～12.0
- 11.9～12.0
- 12
- 12.0～11.0
- 12.0～12.5
- 12～12.5
- 12~13
- 12.0〜13.0
- 12.4~12.5
- 12.5
- 12.5～13.0
- 12.9～13.0
- 13.0～12.0
- 13.0～13.5
- 13～14
- 13.4～13.5
- 13.5～14.0
- 13.9~14.0
- 14
- 14.0～13.0
- 14.0～14.5
- 14~15
- 14.4～14.5
- 14.5～15.0
- 14.9～15.0
- 15.0～14.0
- 15.0～15.5
- 15~16
- 15.4～15.5
- 15.5～16.0
- 15.9～16.0
- 16
- 16.0～15.0
- 16.0～16.5
- 16～17
- 16～25
- 16.0～25.4
- 16.0～32.0
- 16.4～16.5
- 16.5
- 16.5～17.0
- 16.9～17.0
- 17.0～16.0
- 17.0～17.5
- 17～18
- 17.4～17.5
- 17.5～18.0
- 17.9～18.0
- 18
- 18.0～17.0
- 18.0～18.5
- 18~19
- 18.4～18.5
- 18.5～19.0
- 18.9～19.0
- 19
- 19.0～18.0
- 19.0～19.5
- 19～20
- 19.4～19.5
- 19.5～20.0
- 19.9～20.0
- 20
- 20.0～19.0
- 21
- 21.0～20.0
- 22
- 22.0～21.0
- 23
- 23.0～22.0
- 24
- 24.0～23.0
- 25
- 25.0～24.0
- 28.0～27.0
- 30
- 30.0～29.0
- 32
- 32.0～31.0
- M36
- 38
- 39
- 40
- 42
- 50
- 50.8
- 75
- 80
- 100
- 125
- 150
- 160
- 200
- 200～
-
Chuck Type
- Straight collet
- Shrink fit
- Hydro
- Side lock
-
Holder Length L(mm)
- 15
- 15.5
- 16
- 16.5
- 19.5
- 20
- 24.5
- 25
- 26.5
- 29
- 29.5
- 30
- 33
- 34
- 35
- 35.6
- 37
- 38.3
- 38.5
- 40
- 43
- 44
- 44.1
- 44.8
- 45
- 47
- 48
- 50
- 52
- 53
- 54
- 54.4
- 54.6
- 55
- 55.5
- 55.5～62.5
- 57
- 60
- 60.8
- 62
- 62.5
- 63
- 64.6
- 65
- 66
- 67
- 67.5
- 68.5
- 68.6
- 70
- 71
- 73.6
- 74
- 75
- 76.5
- 76.5～83.5
- 76.7
- 77
- 79
- 79.5～91.5
- 80
- 80.6
- 81
- 81.5
- 82
- 84
- 84.5
- 85
- 85.5
- 87.5～94.5
- 90
- 90.5
- 91
- 92
- 93
- 94.5
- 95
- 95/135/165
- 96
- 97
- 97.1～108.1
- 97.5
- 98
- 100
- 100/140/170
- 101.6
- 102.1～113.1
- 105
- 105/145/175
- 105.5
- 107
- 107.5
- 109
- 110
- 111.5
- 112
- 113
- 115
- 115.5～122.5
- 120
- 120/160/190
- 121
- 122
- 123
- 125
- 125/175/205
- 127
- 129.5
- 130
- 130/180/210
- 131.5
- 132
- 135
- 137
- 137.1～148.1
- 137.5
- 140
- 140/190/220
- 142
- 143
- 145
- 145/195/225
- 148
- 148.5
- 149.5
- 150
- 153
- 155
- 156
- 160
- 160.5～167.5
- 162.5
- 163
- 164.5
- 165
- 167
- 167.5
- 169
- 170
- 173
- 174.0
- 175
- 175.5～182.5
- 176.5
- 180
- 180.5
- 181
- 182.1～193.1
- 182.5
- 185
- 186.5
- 187
- 190
- 192
- 193.5
- 195
- 200
- 202.5
- 210
- 218
- 220
- 225
- 226.0
- 235
- 240
- 250
- 255
- 275
- 283
- 285
- 300
- 335
- 350
- 360
- 375
-
Maximum Allowable Rotational Speed(min-1)
-
Coolant System
- Center Through (Blade Through)
- Gap Through
Narrow search by specifying Brand
-
- BIG KAISER (127)
- YUKIWA SEIKO (81)
- NIKKEN KOSAKUSHO (70)
- TRUSCO NAKAYAMA (61)
- SANDVIK (58)
- MANYO TOOLS (57)
- AMF (44)
- ESCO (44)
- TAKURA KOGU (30)
- KATO MFG (26)
- MST CORPORATION (18)
- NOGAJAPAN (18)
- SHOWA TOOL (15)
- NT TOOL (10)
- NORELEM (8)
- NISSIN SANGYO (8)
- FUSO SEIKI (5)
- THE CUT (5)
- NIKKI (4)
- NIIGATA SEIKI (3)
- OSG (3)
- EARTH MAN (2)
- FUJI TOOL (2)
- KASAHARA (2)
- NEW STRONG (2)
- ALBRECHT (1)
- GIGA SELECTION (1)
- BLUEBIRD (1)
- NABEYA (1)
- NAKANISHI (1)
- SKC (1)
- SK 11 (1)
- SHINWA RULES (1)
- TOHIN SHOJI (1)
- VERTEX (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Tooling
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.