Single Axis Robots（Max. Transportable Mass Range (Vertical)：0 to 2.0）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Electric Actuator Slider Type Ball Screw Drive LEFS Series Step Motor/Servo Motor
SMC
[Features]
·Easy to install the main body / reduce installation man-hours
The main body can be installed without removing exterior parts such as covers.
·Table position can be detected by auto switch
·Up to 4 locations can be attached to both sides of the body
·Ball screw drive- 2D / 3D CAD data available
Configure nowStarting from∗ ： 988.33 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Electric Actuator Rod Type LEY Series Step Motor/Servo Motor
SMC
[Features]
·Supports long strokes: MAX. 500 mm
·Direct mounting 3 directions, metal fitting mounting 3 types
·Auto switch can be installed
·Speed control / positioning: Up to 64 points
·Pressing control can be switched
Can be held with the rod pressed against the work, etc.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 595.53 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Configure now
Min. Shipping Days ： 14 Days -
Electric Actuator Rod With Guide Type LEYG Series Step Motor/Servo Motor
SMC
[Features]
·The guide rod is compactly integrated to achieve lateral load resistance and high-precision detent.
·Tip lateral load: 5 times (Comparison of rod type, size 25, 100 strokes)
·Compatible with plain bearings and ball bush bearings
·Pressing control can be switched
Can be held with the rod pressed against the work, etc.- 2D / 3D CAD data available
Configure nowStarting from∗ ： 760.19 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Electric Cylinder, EAC Series
ORIENTAL MOTOR
An electric cylinder equipped with the highly efficient and energy saving AlphaStep AZ Series / AR Series in the motor section.
In addition to the straight type actuator, the manufacturer has prepared a folded type that shortens the overall length and contributes to space saving.
[Features]
・ Compact, high thrust, compatible with a wide range of applications
・ Performance independent of operating conditions
・ Easy to replace the belt (Folded type)Configure nowStarting from∗ ： 654.10 € Min. Shipping Days ： 18 Days *Unit price with basic configuration
-
Electric Actuator Miniature Slide Table Type LEPS Series Step Motor
SMC
[Features]
·High thrust type / basic type
·Compact type motor with excellent compactness and weight reduction- 2D / 3D CAD data available
Configure nowStarting from∗ ： 598.76 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Electric actuator miniature rod type LEPY series step motor (Servo 24 V DC)
SMC
[Features]
・ Small and lightweight
·Manual operation screw: Adjustable when the power for rod / table drive is off- 2D / 3D CAD data available
Configure nowStarting from∗ ： 493.87 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Configure now
Min. Shipping Days ： 14 Days -
Configure now
Min. Shipping Days ： 14 Days -
Electric Slide Table, Compact Type LES Series
SMC
A compact-type electric actuator.
[Features]
· Compact: Workpiece mounting height reduced by up to 12% compared to LESH.
· Vertical work load: increased by up to 50%.
· Lightweight: reduced by up to 29%.
· Maximum pushing force: 180 N.
· Positioning repeatability: ±0.05 mm.
· Reduced cycle time. (Maximum acceleration/deceleration: 5,000 mm/S2, Maximum speed: 400 mm/s)- 2D / 3D CAD data available
Configure nowStarting from∗ ： 627.53 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Electric Actuator, Rod Type, Dust-Tight / Drip-Proof (Equivalent to IP65) Specifications, LEY-X5 Series
SMC
[Features]
·Protective Enclosure: IP65 equivalent
·Supports up to 500 mm stroke- 2D / 3D CAD data available
Configure nowStarting from∗ ： 1,806.49 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Electric Actuator, Slider Type, Ball Screw Drive, Clean Specifications, 11-LEFS Series
SMC
Vacuum suction from the vacuum port suppresses dust generation from the ball screw and guide to the outside.
[Features]
·Built-in vacuum piping
·The main body can be installed without removing exterior parts such as covers.
·Body body linear guide specifications- 2D / 3D CAD data available
Configure nowStarting from∗ ： 918.92 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Electric slide table high rigidity type LESH series
SMC
Integrated circulation type linear guide with integrated guide rail and table.
[Features]
·Compact, Space-Saving
·61% reduction in volume
·Built-in motor in the body
·Symmetrical L type: The position of the table and cable is opposite to that of the R type, expanding the range of design.
·Motor straight type D type: Width dimension shortened, MAX. 45% reduced- 2D / 3D CAD data available
Configure nowStarting from∗ ： 695.53 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Configure now
Min. Shipping Days ： 14 Days -
Configure now
Min. Shipping Days ： 14 Days -
Card motor LAT3 series
SMC
Miniaturize the transport / pressing / length measurement system using a linear motor.
[Features]
·Simple programming (Enter tact time)
Complete by entering only 3 items: travel time, target position, and loading mass- 2D / 3D CAD data available
Configure nowStarting from∗ ： 522.24 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
-
Configure now
Min. Shipping Days ： 14 Days
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Main Body, Peripheral Components |
| Type |
| Stroke(mm) |
| Max. Transportable Mass Range (Horizontal)(kg) |
| Max. Transportable Mass (Horizontal)(kg) |
| Max. Transportable Mass Range (Vertical)(kg) |
| Max. Transportable Mass (Vertical)(kg) |
| Drive Method |
| Guide |
| Lead(mm) |
| Input Power Supply |
| Position Detection |
| I/O Module |
| Table Width W1(mm) |
| Brake |
| Max. Thrust Force Range(N) |
| Max. Thrust Force(N) |
| Noise Filters |
| Table Length L1(mm) |
| Usage Environment |
| Positioning Repeatability(µm) |
| Maximum Velocity(mm/sec) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | SMC | SMC | MISUMI | SMC | ORIENTAL MOTOR | SMC | SMC | MISUMI | MISUMI | SMC | SMC | SMC | SMC | MISUMI | MISUMI | SMC | MISUMI |
| Product Series | Electric Actuator Slider Type Ball Screw Drive LEFS Series Step Motor/Servo Motor | Electric Actuator Rod Type LEY Series Step Motor/Servo Motor | Electric Actuator Rod With Guide Type LEYG Series Step Motor/Servo Motor | Electric Actuator Miniature Slide Table Type LEPS Series Step Motor | Electric actuator miniature rod type LEPY series step motor (Servo 24 V DC) | Electric Actuator, Slider Type, Ball Screw Drive, Clean Specifications, 11-LEFS Series | |||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Starting from∗ | 988.33 € *Unit price with basic configuration | 595.53 € *Unit price with basic configuration | - | 760.19 € *Unit price with basic configuration | 654.10 € *Unit price with basic configuration | 598.76 € *Unit price with basic configuration | 493.87 € *Unit price with basic configuration | - | - | 627.53 € *Unit price with basic configuration | 1,806.49 € *Unit price with basic configuration | 918.92 € *Unit price with basic configuration | 695.53 € *Unit price with basic configuration | - | - | 522.24 € *Unit price with basic configuration | - |
| Min. Shipping Days | 4 Days | 7 Days | 14 Days | 7 Days | 18 Days | 26 Days | 26 Days | 14 Days | 14 Days | 26 Days | 26 Days | 26 Days | 26 Days | 14 Days | 14 Days | 26 Days | 14 Days |
| Main Body, Peripheral Components | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body |
| Type | Sliders | Rods | Sliders | Rods | Sliders | Sliders | Rods | Sliders | Sliders | Sliders | Rods | Sliders | Sliders | Sliders | Sliders | Sliders | Sliders |
| Stroke(mm) | 1,000 ～ 950 | 30 ～ 300 | 50 ～ 400 | 30 ～ 300 | 50 ～ 150 | 25 ～ 50 | 25 ～ 75 | 50 ～ 800 | 50 ～ 800 | 30 ～ 150 | 100 ～ 400 | 1,000 ～ 800 | 50 ～ 150 | 50 ～ 400 | 50 ～ 800 | 10 ～ 50 | 50 ～ 800 |
| Max. Transportable Mass Range (Horizontal)(kg) | 2.1 to 5.0 / 5.1 to 10.0 / 10.1 to 20.0 / 20.1 to 50.0 / 50.1 to 100.0 | 2.1 to 5.0 / 5.1 to 10.0 | 0 to 2.0 / 2.1 to 5.0 | 2.1 to 5.0 / 5.1 to 10.0 | 5.1 to 10.0 | 0 to 2.0 | 0 to 2.0 / 2.1 to 5.0 / 5.1 to 10.0 | 5.1 to 10.0 | 5.1 to 10.0 | 0 to 2.0 / 2.1 to 5.0 | 5.1 to 10.0 | 5.1 to 10.0 / 10.1 to 20.0 / 50.1 to 100.0 | 0 to 2.0 / 2.1 to 5.0 / 5.1 to 10.0 | 0 to 2.0 / 2.1 to 5.0 | 5.1 to 10.0 | 0 to 2.0 | 5.1 to 10.0 |
| Max. Transportable Mass (Horizontal)(kg) | 5 ～ 55 | 3 ～ 10 | 2 ～ 4 | 3 ～ 10 | 7.5 | 0.75 ～ 2 | 1 ～ 6 | 6 ～ 10 | 8 | 1 ～ 5 | 7 | 9 ～ 55 | 1 ～ 8 | 2 ～ 4 | 6 ～ 8 | 1 | 6 ～ 10 |
| Max. Transportable Mass Range (Vertical)(kg) | 0 to 2.0 | 0 to 2.0 | 0 to 2.0 | 0 to 2.0 | 0 to 2.0 | 0 to 2.0 | 0 to 2.0 | 0 to 2.0 | 0 to 2.0 | 0 to 2.0 | 0 to 2.0 | 0 to 2.0 | 0 to 2.0 | 0 to 2.0 | 0 to 2.0 | 0 to 2.0 | 0 to 2.0 |
| Max. Transportable Mass (Vertical)(kg) | 0.5 ～ 2 | 2 | 1 ～ 2 | 1.5 ～ 2 | 2 | 0.25 ～ 1.5 | 0.25 ～ 1.5 | 1 ～ 2 | 2 | 0.25 ～ 2 | 2 | 2 ～ 4 | 0.25 ～ 2 | 1 ～ 2 | 2 | 0.05 ～ Not vertical | 1 ～ 2 |
| Drive Method | Rolled Ball Screw | Rolled Ball Screw | Rolled Ball Screw | Rolled Ball Screw | Rolled Ball Screw | Rolled Ball Screw | Slide Screws | Rolled Ball Screw | Rolled Ball Screw | Slide Screws | Rolled Ball Screw | Rolled Ball Screw | Slide Screws | Rolled Ball Screw | Rolled Ball Screw | Linear Motor | Rolled Ball Screw |
| Guide | Provided | Not Provided | - | Provided | Provided | Provided | Provided | - | - | Provided | Not Provided | Provided | Provided | - | - | Provided | - |
| Lead(mm) | 10 ～ 30 | 10 | 6 ～ 12 | 10 ～ 12 | - | 4 ～ 10 | 4 ～ 10 | 6 ～ 12 | 12 | 4 ～ 16 | 12 | 5 ～ 20 | 4 ～ 16 | 6 ～ 12 | 12 ～ 20 | - | 6 ～ 12 |
| Input Power Supply | 24 V DC | 24 V DC | 24 V DC | 24 V DC | 24 V DC | 24 V DC | 24 V DC | 24 V DC | 24 V DC | 24 V DC | 24 V DC | 24 V DC | 24 V DC | 24 V DC | 24 V DC | 24 V DC | 24 V DC |
| Position Detection | Incremental | Incremental | Incremental | Incremental | Absolute | Incremental | Incremental | Incremental | Incremental | Incremental | Incremental | Incremental | Incremental | Incremental | Incremental | Incremental | Incremental |
| I/O Module | NPN / PNP / DeviceNet / Ethernet / Not Provided / EtherCAT / IO-Link / PROFINET | NPN / PNP / Ethernet / Not Provided / EtherCAT / IO-Link / PROFINET | NPN / PNP / CC-Link / DeviceNet | NPN / PNP / Ethernet / Not Provided / EtherCAT / PROFINET | Not Provided | NPN / PNP / Ethernet / Not Provided / EtherCAT / PROFINET | NPN / PNP / Ethernet / Not Provided / EtherCAT / PROFINET | NPN / PNP / CC-Link / DeviceNet | NPN / PNP / CC-Link / DeviceNet | NPN / PNP / Ethernet / Not Provided / EtherCAT / IO-Link / PROFINET | PNP / Not Provided | NPN / PNP / Ethernet / Not Provided / PROFINET | NPN / PNP / DeviceNet / Ethernet / Not Provided / EtherCAT / PROFINET | - | NPN / PNP / CC-Link / DeviceNet | NPN / PNP / Not Provided | NPN / PNP / CC-Link / DeviceNet |
| Table Width W1(mm) | 39.4 ～ 74 | - | 41 | - | - | 19 ～ 24 | - | 50 | 52 | 32.2 ～ 60 | - | 39.4 ～ 74 | 32 ～ 61 | 41 | 52 | 49 | 50 |
| Brake | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided | Not Provided | Not Provided | Not Provided | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided | Not Provided / Provided | Not Provided | Not Provided / Provided |
| Max. Thrust Force Range(N) | 0 to 100 / 101 to 200 / 201 to 300 / 301 to 500 / 501 to 1000 | 0 to 100 | 0 to 100 | 0 to 100 | 0 to 100 | 0 to 100 | 0 to 100 | 0 to 100 | 0 to 100 | 0 to 100 | 0 to 100 | 0 to 100 / 101 to 200 / 501 to 1000 | 0 to 100 | 0 to 100 | 0 to 100 | 0 to 100 | 0 to 100 |
| Max. Thrust Force(N) | 49 ～ 539 | 30 ～ 38 | 45 ～ 90 | 30 ～ 38 | 25 | 10 ～ 50 | 10 ～ 50 | 45 ～ 90 | 60 | 7.5 ～ 38 | 35 | 88.2 ～ 539 | 7.5 ～ 100 | 45 ～ 90 | 36 ～ 60 | 2.5 ～ 6 | 45 ～ 90 |
| Noise Filters | Not Provided / Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | - | - | Not Provided | Not Provided | Not Provided | Not Provided | - | - | Not Provided | - |
| Table Length L1(mm) | 72 ～ 170 | - | 58 | - | - | 76.4 ～ 113.2 | - | 70 | 90 | 88.5 ～ 316.5 | - | 72 ～ 170 | 111 ～ 285 | 58 | 90 | 60 ～ 150 | 70 |
| Usage Environment | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard / Dust Resistant | Dust Resistant | Standard | Standard / Dust Resistant | Standard | Standard | Standard | Standard |
| Positioning Repeatability(µm) | ±15 ～ ±20 | ±20 | ±20 | ±20 | - | ±50 | ±50 | ±20 | ±20 | ±50 | ±20 | ±15 ～ ±20 | ±50 | ±20 | ±20 | ±5 ～ ±90 | ±20 |
| Maximum Velocity(mm/sec) | 1,000 ～ 1100 | 500 | 300 ～ 600 | 500 | 300 | 150 ～ 350 | 150 ～ 350 | 300 ～ 600 | 600 | 200 ～ 400 | 400 | 250 ～ 500 | 200 ～ 400 | 300 ～ 600 | 600 ～ 1000 | 400 | 300 ～ 600 |
Loading...
Filter by:
-
Main Body, Peripheral Components
- Main Body
- Peripheral Components
-
Type
-
Sliders -
Rods
-
-
Stroke(mm)
- 1,000
- 1,100
- 1,200
- 1,500
- 1,800
- 2,000
- 10
- 15
- 20
- 25
- 30
- 40
- 50
- 60
- 70
- 75
- 80
- 100
- 120
- 125
- 150
- 200
- 250
- 300
- 350
- 400
- 450
- 500
- 550
- 600
- 650
- 700
- 750
- 800
- 850
- 900
- 950
- 1000
- 1050
- 1100
- 1150
- 1200
- 1250
- 1300
- 1350
- 1400
- 1450
- 1500
- 1550
- 1600
- 1650
- 1700
- 1750
- 1800
- 1850
- 1900
- 1950
- 2000
- 2050
- 2100
- 2150
- 2200
- 2250
- 2300
- 2350
- 2400
- 2450
- 2500
- 2550
- 2600
- 2650
- 2700
- 2750
- 2800
- 2850
- 2900
- 2950
- 3000
- 3050
-
Max. Transportable Mass Range (Horizontal)(kg)
- 0 to 2.0
- 2.1 to 5.0
- 5.1 to 10.0
- 10.1 to 20.0
- 20.1 to 50.0
- 50.1 to 100.0
- 150.1 or Higher
The calculation method differs depending on the manufacturer. For details, see the technical data provided by the relevant manufacturer.
-
Max. Transportable Mass (Horizontal)(kg)
- 0.75
- 1
- 1.5
- 2
- 2.4
- 2.5
- 3
- 4
- 4.4
- 5
- 6
- 7
- 7.3
- 7.5
- 8
- 8.2
- 9
- 10
- 11
- 11.9
- 12
- 14
- 15
- 17
- 18
- 19
- 20
- 23
- 25
- 30
- 35
- 40
- 45
- 50
- 55
- 60
- 65
- 70
- 80
- 85
- 90
- 200
The calculation method differs depending on the manufacturer. For details, see the technical data provided by the relevant manufacturer.
-
Max. Transportable Mass Range (Vertical)(kg)
- 0 to 2.0
- 2.1 to 5.0
- 5.1 to 10.0
- 10.1 to 20.0
- 20.1 to 50.0
- 50.1 to 100.0
- 100.1 or Higher
The calculation method differs depending on the manufacturer. For details, see the technical data provided by the relevant manufacturer.
-
Max. Transportable Mass (Vertical)(kg)
- 0.05
- 0.1
- 0.25
- 0.5
- 1
- 1.5
- 2
- 2.5
- 3
- 3.5
- 4
- 4.5
- 5
- 6
- 7
- 7.5
- 8
- 8.5
- 9
- 10
- 11
- 12
- 12.5
- 13
- 14
- 15
- 16
- 17
- 18.5
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 27
- 28.5
- 29
- 30
- 35
- 37
- 38
- 41
- 42
- 43
- 44
- 46
- 50
- 51
- 53
- 72
- 115
- Not vertical
The calculation method differs depending on the manufacturer. For details, see the technical data provided by the relevant manufacturer.
-
Drive Method
-
Guide
-
Lead(mm)
-
Input Power Supply
-
Position Detection
-
I/O Module
- NPN
- PNP
- CC-Link
- DeviceNet
- Ethernet
- Not Provided
- EtherCAT
- IO-Link
- PROFINET
-
Table Width W1(mm)
-
Brake
-
Max. Thrust Force Range(N)
-
Max. Thrust Force(N)
-
Noise Filters
-
Table Length L1(mm)
-
Usage Environment
-
Positioning Repeatability(µm)
-
Maximum Velocity(mm/sec)
CAD data type
-
- 2D
- 3D
Examples how you can use these components
Categories related to Single Axis Robots
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.