Indexing Plungers（Page 2）

?* Information on days to ship and prices

• 

  Index Plunger (LBLT)

  IMAO CORPORATION

  Simple type index plunger ideal for temporary work fixing, etc.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	17.91 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Cam action indexing plungers, Steel, with locking function

  GANTER

  The groove on GN 721.1 cam action indexing plungers ensures that the locking pin remains in its withdrawn position.
  For opposing cam action indexing plungers the left or right-handed types allow practical use, that is the same setting of the lock.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	17.40 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Indexing plungers for precision locating

  GANTER

  Indexing plungers GN 817.3 realize a reasonable priced precision locating when guide bushes DIN 179 are used.
  For this purpose a guide bush DIN 179 is used as guide, whereby the dimension l3 of the plunger determines the length of the bush.
  The precise location is, therefore, not dependent on the guide pin in the plunger, but on the accuracy of the guide bush (bore tolerance F7) and the plunger (tolerance h7). Both components are hardened and ground. It goes without saying that the bush length also influences the accuracy of the positioning.
  Type C is used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	24.28 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing plungers, Steel, with knob, with and without rest position

  GANTER

  GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
  The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
  During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	4.76 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spring bolts, Stainless Steel / Plastic knob

  GANTER

  The plunger of the Stainless Steel-Spring bolts GN 313 does not protrude in the inoperative position.
  It can be operated manually or in Type D and DK mechanically (pneumatic cylinder, cam plate, etc.) when it will protrude only as long as it is operated.
  Using the internal thread at identification 2 on the pressure side, special pressure bolts or a rod arrangement can be operated, for instance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	12.86 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel-Spring latches with flange for surface mounting

  GANTER

  Spring latches GN 722.3 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.
  Spring latches GN 722.3 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	30.36 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing plungers with rotation lock and lead-in chamfer, Form A (K1300)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	10.87 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing Plungers / Flanged

  MISUMI

  [Features] The presence of the flange makes it possible to adjust the position in the left and right directions.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	13.23 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cam action indexing plungers with flange

  GANTER

  Cam action indexing plungers GN 612.9 are used in cases where the plunger must not protrude all the time. By rotating the lever through 180° the plunger withdraws itself. The notch allows safe positioning.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	8.98 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Mini indexing plungers, covered indexing mechanism

  GANTER

  Mini indexing plungers GN 822 are distinguished for their small dimensions. They have been designed for installation in thin walled sheet metal constructions.
  They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
  With Type C the knob can be turned by 30° and a notch keeps the knob in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	5.24 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing plunger with cam lever steel or stainless steel, Form B (K1584)

  KIPP

  · Simple and quick operation
  
  · Suitable for high temperature applications
  
  · With integrated detent function

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	10.53 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing Plungers / Knobless Type

  MISUMI

  [Features] You can use it by attaching a knob according to the environment of use.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	15.23 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing Plungers / Resin Knob

  MISUMI

  [Features] The pin can be pushed in and out manually with a knob or lever. Suitable for temporary positioning of workpieces.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	17.48 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing Plunger - PDV

  NABEYA BI-TECH

  [Features]
  · Index plunger to control the coming and going of the pin by turning the lever.
  · Standardized three types of operational variations.
  ■ [PDV-A] [PDV-AK]-Standard Type
  · The pin retracts into the body by turning the lever 90°.
  · Turn the lever slightly and the pin returns to its original position via the action of the integrated spring.
  ■ [PDV-B] [PDV-BK]-Retention Type
  · The pin retracts into the body by turning the lever 120°.
  · The pin will not return, even if the lever is released while in the 120° position.
  · Turn the lever slightly in the opposite direction and the pin will returned to its original position via the action of the integrated spring.
  ■ [PDV-C] [PDV-CK]-Lock Function Type
  · The pin retracts into the body turning the lever 120°.
  · The guide pin then fits into the slot on the main body, locking the unit with the pin retracted.
  · To unlock, pull the lever out slightly and rotate it in the opposite direction.
  · Turn the lever slightly and the pin returns to its original position via the action of the integrated spring.
  ■ [PDV-A] [PDV-B][PDV-C]-Without Lock Nut
  · Use loosening prevention service.
  ■ [PDV-AK] [PDV-BK][PDV-CK]-With Lock Nut for Fixing.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	66.16 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing Plungers, PMY

  NABEYA BI-TECH

  Simple-structure indexing plungers. Excellent cost performance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	12.86 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Index Bolt With Hexagon Collar 22120, With T-Handle

  HALDER

  [Features]
  · For index holes.
  · Dimensions do not change, regardless of whether or not locking mechanisms are present.
  · Screw parts are designed to have clearance at the root, so even the hexagonal section can be tightened properly.
  · Operating temperature range: -30 to +80°C.
  · Use the distance collar (EH22120) to adjust the depth of the screw-in.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	8.87 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Precision Index Plungers With Tapered Pin

  HALDER

  [Features]
  · This precision index bolt can be used in combination with bushings for speedy positioning and fixing in place.
  · Both parts are accurately finished, ensuring high repetition accuracy.
  · For specifications with hold mechanisms, pull the knob and rotate it 90 degrees.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	24.41 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cam action indexing plungers with flange

  GANTER

  Cam action indexing plungers GN 612.10 are used in cases where the plunger must not protrude all the time. By rotating the lever through 180° the plunger withdraws itself. The notch allows safe positioning.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	9.74 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cam action indexing plungers, Steel

  GANTER

  Cam action indexing plungers GN 612 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A groove is provided in either position to prevent the lock from rotating.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	14.08 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Clamping indexing plungers with safety function

  GANTER

  Clamping indexing GN 7336.8 plungers are an advanced development of the GN 7336.7 clamping knobs with indexing plunger.
  Like the latter, they are used for positioning, securing and clamping adjusting elements at the same time. This configuration ensures that the indexing pin cannot be pulled from the indexing bore by turning the knurled knob, but only be deliberately pulling the handle (safety function).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	23.38 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Indexing plungers with T-Handle

  GANTER

  Indexing plungers GN 817.4 are similar to GN 817, but with a T-handle instead of a round head.
  This shape allows better visual orientation of the indexing position of Type C and is advantageous when greater unlocking forces occur.
  Type C with rest position is used in such applications where the plunger must not protrude continually. In that case the knob is retracted and afterwards turned by 90°. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	9.14 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing Plungers / Push Type

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	26.82 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing Plunger PXVS

  NABEYA BI-TECH

  [Features]
  - Stainless steel.
  - Superior corrosion resistance.
  - Turn the lever to control the pin insertion.
  - Retractable into the body with a 180° turn of the lever.
  - Lever can be locked with a notch machined in the main body.
  - Ergonomic lever cap attached to the PXVS-B/BK.
  - Nickel plating for good abrasion resistance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	45.20 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing Plunger PXZ

  NABEYA BI-TECH

  [Features]
  - All main body threads can be embedded in equipment; only the knob is exposed.
  - Attractive look.
  - Hardened (steel) or nickel-plated (stainless steel).
  - Superior abrasion resistance.
  - New standardization for PXZS-Z and PXZS-SK with stainless steel knob.
  - Use a locking service for fixing indexing plungers.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	17.61 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Index Plunger (With No Knob) (SDX-N)

  IMAO CORPORATION

  The operating unit can be remotely operated by connecting with screws. There is no hexagonal part so it can be mounted in a small space. Available in steel and stainless steel.
  
  [Features]
  - A hand operated spring plunger where you pull the knob and the nose retracts to easily release the positioning, while if the knob is released, it reverts to the original state by the force of the internal spring.
  - If performing remote operation, it can be joined with the operation screw part.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	16.42 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Indexing Plungers

  NABEYA

  Rotating the operation knob 90° enables fixation with the pin retracted.
  
  [Features]
  · Pulling and rotating the operation knob 90° enables locking with the pin retracted.
  · To unlock, pull the operation knob a little and rotate it by 90°.
  · Returns to its original position via internal spring action

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	41.83 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Plungers

  TOSHIN CASTER

  Simple, sturdy structure for easy, safe locking/unlocking. Optimal for equipment that performs positioning or height adjustment.
  
  [Features]
  - Lever-type indexing plunger with simple structure, high strength, and safe design.
  - When locked, the design prevents it from coming off due to accidental shock or contact.
  - When unlocked, the lever can be pulled up, retracted, and retained on the opposite side.
  - Whether locked or unlocked, the lever will not get in the way.

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	30.47 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Index Bolt Compact, With Hexagon Collar And Locking

  HALDER

  [Features]
  · For index holes.
  · Pull the knob and rotate 90 degrees to fix the pin in place in a withdrawn state using the notch.
  · External dimensions are the same regardless of whether or not holding mechanisms are present.
  · The roots of screw parts are loosened, so they can be screwed in fully.
  · Operating temperature range is from -30 to +80°C.
  · Use the distance collar (EH22120) to adjust the depth of the screw-in.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	9.75 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing plunger, Steel / Plastic knob

  GANTER

  Type G or GK of the GN 617 indexing plungers have been designed for applications where the indexing plunger is not operated with the standard knob.
  The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	8.36 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing plungers with rest position, Steel / Plastic knob

  GANTER

  Indexing plungers GN 617.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted.
  A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	9.98 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing plungers, Stainless Steel / Plastic knob

  GANTER

  Type G or GK of the GN 617 indexing plungers have been designed for applications where the indexing plunger is not operated with the standard knob.
  The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	12.34 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing plungers, Steel / Plastic-knob

  GANTER

  Indexing plungers GN 817 with rest position (Type C / CK) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	7.34 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spring latches with flange for surface mounting

  GANTER

  Spring latches GN 722.2 are used when the indexing pin is temporarily not allowed to protrude. The indexing pin retracts by turning the latch by 180°. A lock notch will hold the latch in both positions.
  Spring latches GN 722.2 are designed for use in steel construction or in locksmith shops where less precise positioning / locking is normally required. The dimensional tolerances are therefore chosen to ensure that functional safety is guaranteed under dirt exposure and that cost-effetive production methods are used.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	13.40 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel-Indexing plungers

  GANTER

  The indexing plungers GN 613 are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator, GN 817 indexing plungers are to be preferred.
  A special screw driver GN 613.1 is available. Two slots are provided in the upper end of the body which are accessible with the knob in its retracted position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	18.68 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Indexing plungers

  GANTER

  GN 7017 Stainless Steel-Indexing plungers are activated through a lever and are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
  The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
  During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	7.84 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing plungers Form A (K0338)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Easy handling
  
  · Material: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	6.93 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers, short version, Form C (K0748)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Ideal where space is restricted:
  
  · Material: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	4.26 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing Plunger PLX

  NABEYA BI-TECH

  Two types of standardized stroke for each pin diameter. For indexing or positioning.
  
  [Features]
  - Two types of standardized stroke for each pin diameter (except for ⌀10 and ⌀12).
  - For indexing or positioning.
  - Pin is hardened (steel) or nickel-plated (stainless steel). Excellent abrasion resistance.
  - If the threaded part is too long for the mounting surface, use the PXC indexing plunger collar instead.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	12.68 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing Plunger PLY

  NABEYA BI-TECH

  Two types of standardized stroke for each pin diameter. Pull the knob and rotate 90° to lock with the pin retracted. To unlock, pull the knob slightly and rotate 90°. Returns to its original position via internal spring action.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	13.93 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Index Plunger PMX

  NABEYA BI-TECH

  Simple structure index plunger.
  [Features]
  · Superior cost performance.
  · For all pin diameters, coarse thread and fine thread are standardized.
  · Can select main body material quality and whether or not to include a lock nut using the product code.
  [Applications]
  · For positioning workpieces.
  · For attaching and detaching workpieces.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	12.29 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Index Plunger (NDXN)

  IMAO CORPORATION

  It is a classic index plunger with excellent cost performance. Various types are available such as a nose hardening type, no baking type, etc.
  
  [Features]
  - It is a manual spring plunger. If you pull the knob the nose retracts and the position is determined and release it easy, when you release your hand it returns to the original state by the built-in spring.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	13.23 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Index Plunger (Long Stroke) (NDXNE)

  IMAO CORPORATION

  As the nose length is long, It can be inserted deeply into the other side. Available in steel and stainless steel.
  
  [Features]
  - With the spring plunger hand operation, when the knob is pulled the nose retracts but can easily be released. Let go and the nose returns to the original state by means of the internal spring.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	17.62 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Indexing Plungers Simple Type IP

  KONISHI MFG

  Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	16.82 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Index Bolt With Hexagon Collar 22120

  HALDER

  [Features]
  · For index holes.
  · Operating temperature range is from -30 to +80°C.
  · Use the distance collar (EH22120) to adjust the depth of the screw-in.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	7.70 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cam action indexing plungers, flange for surface mounting

  GANTER

  Cam action indexing plungers GN 612.2 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	30.78 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...