- inCAD Library Home
- > No.000042 Manually indexed rotary table
No.000042 Manually indexed rotary table
66
66
Ball Buttons are used to prevent wear on the outside of the housing.
Related Category
Ball Button
| Product name | Ball Buttons/Tapped |
|---|---|
| Model number | TBBT8 |
* Orange colored cells in the table below indicate the part numbers that were actually used in this app. example.
Selection criteria
Contact is made at the retaining position, reducing wear on the outside body.
Risk info.
Some wear and dents.
Available sizes
■Ball Buttons- Tapped
Material: W1 - 9 Carbon Tool Steel (Hardness: 55 ~ 60HRC)
Surface treatment: Electroless nickel plating
| Thread DIA. (Coarse) | Thread length | Button O.D. | Button height |
|---|---|---|---|
| M4 | 5 | Ø8 | 3 |
| M5 | 6 | Ø9 | 3 |
| M6 | 8 | Ø12 | 3 |
| M8 | 10 | Ø15 | 4 |
| M10 | 12 | Ø20 | 4 |
| M12 | 15 | Ø22 | 4 |
* When combining with ball plungers, use the same thread DIA.
Accuracy Info
■Accuracy of Ball button (Tap type)
Concentricity of the thread and the notch: 0.1
Ball Plunger
| Product name | Ball Plungers/Long |
|---|---|
| Model number | BPJL8 |
* Orange colored cells in the table below indicate the part numbers that were actually used in this app. example.
Selection criteria
Suitable for temporarily retaining the table in the preferred working position.
Available sizes
■Ball Plungers - Long
| Ball material | Load type | Body | Ball | Spring | |||
|---|---|---|---|---|---|---|---|
| Material | Hardness | Surface treatment | Material | Hardness | Material | ||
| Metal | For extra light loads | EN 1.1191 Equiv. | 29 - 35HRC | Black oxide | EN 1.3505 Equiv. | 55HRC - | JIS-SWP-B |
| For light loads | |||||||
| For heavy loads | EN 1.4301 Equiv. | - | - | ||||
| For extra heavy loads | EN 1.1191 Equiv. | 29 - 35HRC | Nickel plating | ||||
| Resin | For extra light loads | Black oxide | Polyacetal - | - | |||
| For light loads | |||||||
| For heavy loads | |||||||
| For extra heavy loads | Nickel plating | ||||||
■Sizes and Dimensions
| Thread DIA. (Coarse) | Metal ball | Plastic ball | Body length | ||
|---|---|---|---|---|---|
| DIA. | Stroke | DIA. | Stroke | ||
| M3 | Ø1.5 | 0.5 | - | - | 13 |
| M4 | Ø2.5 | 0.8 | Ø2.4 | 0.7 | 15 |
| M5 | Ø3 | Ø3 | 0.8 | 18 | |
| M6 | Ø3 | Ø3 | 0.8 | 20 | |
| M8 | Ø4 | 1 | Ø4 | 1 | 23 |
| M10 | Ø5 | 1.2 | Ø5 | 1.2 | 27 |
| M12 | Ø7.1 | 1.8 | Ø7 | 1.8 | 32 |
| M16 | Ø9.5 | 2.5 | Ø9.5 | 2.5 | 40 |
* Plastic ball type for thread DIA. M3 is not available.
Performance info.
■Ball plunger (Long) spring load (N)
| Thread DIA. (Coarse) | For extra light loads | For light loads | For heavy loads | For extra heavy loads | ||||
|---|---|---|---|---|---|---|---|---|
| min. | max. | min. | max. | min. | max. | min. | max. | |
| M3 | 0.3 | 0.6 | 1.0 | 2.0 | 1.5 | 2.9 | 2.2 | 5.0 |
| M4 | 0.6 | 1.6 | 2.0 | 4.9 | 3.9 | 9.8 | 2.5 | 12.6 |
| M5 | 1.0 | 3.1 | 2.9 | 9.8 | 4.9 | 19.6 | 11.7 | 25.1 |
| M6 | 1.6 | 4.9 | 4.9 | 14.7 | 9.8 | 29.4 | 18.7 | 35.3 |
| M8 | 2.4 | 6.4 | 6.9 | 19.6 | 12.7 | 39.2 | 24.5 | 46.8 |
| M10 | 3.0 | 8.1 | 8.8 | 24.5 | 18.6 | 49.0 | 26.7 | 58.7 |
| M12 | 3.5 | 9.7 | 9.8 | 29.4 | 19.6 | 58.8 | 26.1 | 62.3 |
| M16 | 5.7 | 15.8 | 15.7 | 49.0 | 29.4 | 98.0 | 55.4 | 116.0 |
* Load "min." is the initial load, and "max." is when the ball is fully depressed.
-
-
TERMS AND CONDITIONS FOR USE OF CAD DATA-
Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
- 1. CAD Data
- The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
- 2. Disclaimer on Data
- While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
- 3. Copyright
-
Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
- 4. Disclaimer of Warranty
- ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances). - 5. Policy of Third Parties
- You may be required to separately agree to third party's policies if you use third party software to create or browse the Data or use a third party’s CAD data. In this case, the Company does not assume any responsibility for defects of such CAD data or the software of the third party or violation of their rights. Understand them before use.
CAD Data Download (Unit Assembly)
CAD Data Download: File Format
Cautions on the CAD data
-
Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
You will need to edit the Data so that it meets your specific design conditions. -
The CAD data unit assembly consists of sub-assemblies.
Each sub-assembly unit can be used as it is or can be edited. - The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
- The Data including the third-part components are made by the Company.
* The part in the frame is a sub-assembly unit.
-
Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
-
- * Unit assembly CAD data consists of some sub-assemblies.
Each sub-assembly unit can be used as it is or can be edited.
Application Overview
Purpose
- A manually indexed rotary table using a ball plunger and ball buttons.
- Used for inspecting specific locations on a component with microscope.
Target workpiece
- Plastic case
Case dimensions: Ø110 H20
Design Specifications
Operating Conditions or Design Requirements
- External dims.: W100 x L170 x H129
- Table O.D.: 120
Required Performance
- Retaining force that withstands 10N of external force applied.
Selection Criteria for Main Components
- For ease of adjustment, Long Ball Plunger is used in this application.
Design Evaluation
Verification of main components
- Select a ball plunger capable of retaining a workpiece.
- Ball plunger retention force calculations
- V groove angle of the ball button is 45 degrees per side, and plunger setting load and operation force are the same.
The retaining force with plunger setup for 0.078mm stroke (almost zero touch) is
0.99N + 6.9N = 7.9N - Max. force to overcome the V groove is at the plunger stroke 0.75mm,
9.525N + 6.9N = 16.425N - Distance from ball button groove edge to the rotation center is approx. 53mm,so the torque that it takes to overcome the V groove is approx. 16.425 x 0.053 = 0.87N･m (Actually a little more due to friction)
When an external force 1.0kg (10N) applies to the center of handle (80mm from the center of rotation), the torque is 0.8N･m
⇒ BPJL8 where the retention force covers the load value is selected.
- V groove angle of the ball button is 45 degrees per side, and plunger setting load and operation force are the same.
Other Design Consideration
- A bearing holder is used to retain rotation.
Explore Similar Application Examples
Page
-
/
-
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.