Base

?* Information on days to ship and prices

• 

  Two-way connector clamps, Aluminium

  GANTER

  The clamping bores of GN 131 two-way connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	21.56 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Flexible Stand

  SURUGA SEIKI

  ø12 or ø20 rods can be fixed and freely positioned. Uses cam type fixing, meaning that three joints can handily be fixed using a single clamp knob.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	229.80 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Rotation Plate

  SURUGA SEIKI

  Can load, 360° rotate, and fix at any position Opt Station holders. Can be easily rotated, making it ideal for routing optical circuits.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	97.57 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Two-way connector clamps, Aluminium

  GANTER

  The clamping bores of GN 132 two-way connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	25.14 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Magnet Base

  SURUGA SEIKI

  [Features]
  · Switch the lever ON/OFF to attach or detach to or from magnetized vibration removal boards and laboratory tables etc.
  · Allows for fixing in any position, regardless of the position of the tapped holes.
  · A variety of types are available; from highly magnetized types to thin types. Select the most appropriate product to match the intended application.
  · Rod stands etc., can be mounted with mounting screws of A22-1: M16P=1
  · Use an adapter plate to mount □40 mm and □60 mm stages.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	82.01 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Two-way connector clamps

  GANTER

  The clamping bores of GN 131 two-way connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911.3 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	45.08 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  T-angle connector clamps, Aluminium

  GANTER

  The clamping bores of GN 193 T-angle connector clamps are not machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively. The versions with square bores are also suitable for profile systems.
  
  Bores and square bores of the same nominal size can be assembled in any combination. For instance, nominal size 20 has the following combination options: B20-B20, B20-V20, V20-B20 and V20-V20.
  
  The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	36.40 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Rotation Type Cross Clamp

  SURUGA SEIKI

  A cross clamp for fixing a pole or a rod at an arbitrary angle. Poles and rods are fixed using the clamp. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	45.75 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  T-angle connector clamps, Aluminium

  GANTER

  The clamping bores of GN 192 T-angle connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  
  The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	25.80 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rod

  SURUGA SEIKI

  A stainless steel rod for mounting optical parts. A holder for the Opt Station that can be used as a rod type holder. Includes M4 screws.
  
  [Features]
  ■ [A40M/A41M] A stainless steel rod for mounting optical parts.
  · A holder for the Opt Station that can be used as a rod type holder. Includes M4 screws.
  ■ [A40/A41/A42] A stainless steel rod for mounting optical parts.
  · Includes an M6 (P=1) screw, which can be used together with models A40 to A42, enabling mounting to various types of holder etc. From A40 to A42, M6P=1 screws are included, making mounting possible on a variety of holders.
  · There is a through hole with a diameter of ø3 mm or 4 mm at the bottom of the M6 screw. Insert a wrench or similar into this hole when mounting to a holder in order to fix it securely.

  Select to compare

  › Configure now
  Min. Shipping Days ：	9 Days

• 

  Aluminum Breadboard (for M4 / for M6)

  SURUGA SEIKI

  Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.
  
  [Features]
  · Laboratory units can be configured in saving space installations by placing on existing laboratory benches.
  · Units configured on the breadboard can be moved to and stored at any location.
  · Made of aluminum and the surface is anodized. It also comes with a handle which is useful for transportation.
  · The top surface is configured of a 25 mm matrix of tapped holes for both M4 and M6 hole types. All holes are through holes.
  · Features M6 bolt holes for fixing to vibration removal boards.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	517.15 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Fixed Type (Hexagonal Type) Cross Clamp

  SURUGA SEIKI

  [Features]
  · A bolt type cross clamp for heavy loads. The bolt includes a hexagonal socket head.
  · Poles or rods can be orthogonally connected.
  · Fixing is done using split clamping.
  · Fixing is done by tightening the M5 bolts.
  · Features a slitted fixing section. Twist the clamp section to securely fix the object.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	55.58 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Adapter Plate

  SURUGA SEIKI

  An adapter plate that is compatible with a variety of stages. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	25.75 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Camera Mounting Adapter

  CHUO PRECISION INDUSTRIAL

  [Features]
  · The HC-41 and HC-61 are adapters for fixing cameras and video cameras that have a tripod screw thread (nominal size 1/4).
  · Screw the tripod screw (camera screw) into the camera (or whichever product is being used), before then fixing to the adapter.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	72.31 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Magnet Stand

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A magnet stand that attaches using magnets.
  · For switching attraction (magnetic force) between ON and OFF, rotate or slide the lever.
  · The center section features M6 tapped holes and a single M16P1 tapped hole. These can be used for mounting a variety of stands.
  · Stages can be mounted using the M2 or M4 tapped holes.
  · The value of the attraction force is for a polished surface.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	108.45 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Lever Type Magnet Stand

  CHUO PRECISION INDUSTRIAL

  [Features]
  · A magnet stand that attaches using magnets.
  · For switching attraction (magnetic force) between ON and OFF, rotate or slide the lever.
  · The center section features M6 tapped holes and a single M16P1 tapped hole. These can be used for mounting a variety of stands.
  · Stages can be mounted using the M2 or M4 tapped holes.
  · The value of the attraction force is for a polished surface.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	125.66 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Pole ø12

  CHUO PRECISION INDUSTRIAL

  [Features]
  · An extendable, non-magnetic stainless steel pole with a male thread and tapped holes. (PL-12-300M cannot be extended.)

  Select to compare

  › Configure now
  Starting from∗ ：	18.43 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  T-angle connector clamps, Aluminium

  GANTER

  The clamping bores of GN 194 T-angle connector clamps are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively. The versions with square bores are also suitable for profile systems.
  Bores and square bores of the same nominal size can be assembled in any combination. For instance, nominal size 20 has the following combination options: B20-B20, B20-V20, V20-B20 and V20-V20.
  
  The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	41.72 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Two-way connector clamps, Aluminium

  GANTER

  The clamping bores of GN 133 two-way connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	25.04 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Pole (M16 Tip)

  SURUGA SEIKI

  A stainless steel pole. Used by standing on various types of stage, base, or similar using an M16P = 1 thread, and then connecting to cross clamps, etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Select to compare

  › Configure now
  Min. Shipping Days ：	10 Days

• 

  L Type Bracket

  SURUGA SEIKI

  Can be attached to a rod. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	38.64 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Aluminum Optical Bench

  SURUGA SEIKI

  Lightweight, and rust-proof. Can be used for constructing a linear optical experiment system using a dedicated carrier.
  
  [Features]
  · Can be directly mounted to a vibration removal board using M6 bolts.
  · Bench Width: 50 mm, Height: 25 mm. Low optical axis and high stability.
  · Products with a /ST at the end of the model number include a scale.
  · For total loads applied onto the optical bench, as a general rule, avoid unbalanced or concentrated loads and ensure that it is equal to or less than 10 times the weight of the bench itself.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	133.04 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Breadboard (for M3)

  SURUGA SEIKI

  [Features]
  · An aluminum breadboard for Opt Station 40 mm stages.
  · Includes a handle so that assembled optical systems can be carried as is.
  · The upper surface features 16 mm M3 tapped holes.
  · Flatness: 0.20 mm or less.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	688.02 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Spacer □ 60 for Optical Axis Height Alignment

  SURUGA SEIKI

  A spacer for aligning the optical axis. Used when the assembled height of the stage is insufficient in relation to the configured optical axis etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	25.86 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Fixed Type Cross Clamp

  CHUO PRECISION INDUSTRIAL

  [Features]
  · Used to retain holder shafts and poles orthogonally (at 90°) to each other.
  · Available with three diameters; ø8 mm, 12 mm, and ø20 mm. Products are available combining different diameters.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	36.26 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Rotation Type Cross Clamp for Light Loads

  CHUO PRECISION INDUSTRIAL

  [Features]
  · Used to retain holder shafts and poles at free intersecting angles.
  · Available with three diameters; ø8 mm, 12 mm, and ø20 mm. Products are available combining different diameters.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	42.61 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Universal Arm

  CHUO PRECISION INDUSTRIAL

  [Features]
  · Each axis can be simultaneously moved in any direction using the handle, and fixed.
  · Even more handy when used in combination using the M16P1 tapped hole on the magnet stand.
  · There are products with ø8 mm, ø12 mm, and ø20 mm holder parts, and products with movable ranges of 0 to 46 mm.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	223.22 €
  Min. Shipping Days ：	15 Days

  *Unit price with basic configuration

• 

  GN 191 T-angle connector clamps, Aluminium

  GANTER

  The clamping bores of GN 191 T-angle connector clamps are mechanically machined and designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The standard clamping screws are socket cap screws DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	21.50 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Linear actuator connectors, Aluminium

  GANTER

  GN 131.1 linear actuator connectors are normally supplied mounted only in connection with a linear actuator and for function control.
  By means of the clamping screws on the guide bores d1 / d2 the movement can either be set or the linear actuator connector can be clamped (after final adjustment).
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	45.92 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Linear actuator connectors, Aluminium

  GANTER

  Linear actuator connectors GN 131.2 are normally supplied mounted only in connection with a linear actuator and for function control.
  By means of the clamping screws on the clamping bores d1 / d2 the movement can either be set or the linear actuator connector can be clamped (after final adjustment).
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	48.90 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  T-angle linear actuator connectors, Aluminium

  GANTER

  T-angle linear actuator connectors GN 191.1 are normally supplied mounted only in connection with a linear actuator and for function control.
  By means of the clamping screw on the guide bore d1 the movement can either be set or the linear actuator connector can be clamped (after setting of final adjustment).
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	46.40 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Two-way connector clamps, multi part assembly, same bore dimensions

  GANTER

  The clamping bores of GN 134 flanged two-way con-nector clamps are not machined and specially designed for construction tubings GN 990 or DIN 2391, DIN 2395 and DIN 2462 respectively.
  The versions with square bores are also suitable for profile systems.
  
  Bores and square bores of the same nominal size can be assembled in any combination. For instance, nominal size 20 has the following combination options: B20-B20, B20-V20, V20-B20 and V20-V20.
  
  The standard version of the clamping screws are socket cap screws with hexagonal socket DIN 912. They can be replaced by clamping kits GN 911 (article code see table of dimensions).

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	35.86 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Free-Size Rod

  SURUGA SEIKI

  The length, diameter, and tap can be configured from the table. Please ask for special taps and special outer diameters. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Select to compare

  › Configure now
  Min. Shipping Days ：	12 Days

• 

  Rod for Extension (M6 Tip)

  SURUGA SEIKI

  By using this rod, holders and other similar items can be set to various optical axis heights without having to purchase new rods. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Select to compare

  › Configure now
  Min. Shipping Days ：	9 Days

• 

  Variable Height Pole Set (M6 Tip)

  SURUGA SEIKI

  Use for changing the height of the height adjustment platform, etc. Any length within 300 mm can be specified in increments of 1 mm. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Select to compare

  › Configure now
  Min. Shipping Days ：	13 Days

• 

  Aluminum Breadboard (Handle for A64)

  SURUGA SEIKI

  Laboratory units can be configured in saving space installations by placing on existing laboratory benches. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  Select to compare

  › Configure now
  Starting from∗ ：	70.87 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Overhang Plate

  SURUGA SEIKI

  A plate for attaching to stage units and positioning tilt stages. Used when stage units are interfering with each other, making it difficult to place them in close proximity to each other.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	116.28 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Collet Type Rod Stand

  SURUGA SEIKI

  Holds items via a collet type tightening method. This ensures excellent stability and more effective holding. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	107.47 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Slide Plate

  SURUGA SEIKI

  Can load and slide Opt Station holders. Can be used for adjusting the position shift of mirror holders, etc. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	64.74 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Plate Type Rod Stand

  SURUGA SEIKI

  [Features]
  · A stand for fixing rods with a length of 10 mm.
  · Also includes a 10 mm length rod.
  · Can be used as the rod stand for the Opt Station holder, fixing it in any position (360°).

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	64.52 €
  Min. Shipping Days ：	10 Days

  *Unit price with basic configuration

• 

  Base Plate

  SURUGA SEIKI

  The base plate is compatible with a variety of stages.
  
  [Features]
  · A plate for connecting stages and holders to vibration removal boards with M6 tapped holes etc.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	32.29 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Base Mounting Screw

  SURUGA SEIKI

  Used for fixing base plates and similar items to vibration removal boards etc. Can fix in any position.
  
  [Features]
  · Used for fixing base plates and similar items to vibration removal boards etc. Can fix in any position.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	24.56 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Carrier for Bases

  SURUGA SEIKI

  A carrier for A10 connections. Used for fixing optical benches to bases such as those on optical surface plates etc. A magnet plate may be required depending on the base. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	109.55 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Post Fork

  SURUGA SEIKI

  A tool for fixing posts. Lightly secure by hand and then, after finely positioning, tighten with a hex wrench. Note: The CAD data for this series is being modified. This data will be made available as soon as the modifications have been completed.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	32.79 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Post Base

  SURUGA SEIKI

  [Features]
  · A pedestal for posts.
  · Can be used, even when attached to a rod stand.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	21.30 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...