Bearing Components（Page 3）

?* Information on days to ship and prices

• 

  L-section ring

  FAG

  [Specifications]
  ・Inner Diameter(mm): 45~320.08
  ・Outer Diameter(mm): 71.4~375.4
  ・Width(mm): 10~36

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	79.57 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Retaining brackets MS30, main dimensions to DIN5406

  FAG

  [Specifications]
  ・Inner Diameter(mm): 7~14
  ・Length of retaining ring(mm): 20~36
  ・Width of inner retaining ring(mm): 13.5~28
  
  Securing plate MS, locknut, DIN5406.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.92 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Retaining brackets MS31, main dimensions to DIN5406

  FAG

  [Specifications]
  ・Inner Diameter(mm): 12, 14, 18
  ・Length of retaining ring(mm): 24, 28, 32
  ・Width of inner retaining ring(mm): 30.5~45
  
  Securing plate MS, locknut, DIN5406.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	24.22 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Shaft locating washers WS811, to DIN 616 / ISO 104, shaft locating

  INA

  [Specifications]
  ・Internal Diameter(φ): 15~320
  ・Outer Diameter(φ): 28~396
  
  Axial cylindrical roller bearings 811, single direction, comprising K811, GS, WS.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.97 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Shaft locating washers WS893, to DIN 616 / ISO 104, shaft locating

  INA

  [Specifications]
  ・Internal Diameter(φ): 35~140
  ・Outer Diameter(φ): 68~240
  
  Axial cylindrical roller bearings 893, single direction, comprising K893, GS, WS.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	54.87 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Locating rings / Internal diameter 82mm

  SKF

  [Specifications]
  ・Inside diameter: 82 mm
  ・Outside diameter: 90 mm
  ・eClass code:
  ・23-05-17-90
  
  A bearing in the locating position must be secured axially in the housing. If the bearing seat in the housing and the bearing width do not match, locating (stabilizing) rings are required. Typically, two locating rings are required per housing. One ring should be placed on each side of the bearing. If only one locating ring is required, it should be installed on the same side as the lock nut.

  Select to compare

  Configure now
  Starting from∗ ：	6.42 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Lock washers / Internal diameter 160mm

  SKF

  [Specifications]
  ・Bore diameter: 160 mm
  ・Outside diameter: 199 mm
  ・eClass code:
  ・23-11-07-05
  
  MB and MBL lock washers are locking devices, used to secure KM, KML and HM .. T lock nuts onto a shaft or adapter sleeve and prevent unintentional loosening. MB .. A is a stronger version of the MB washer. The lock washers engage a keyway in the shaft or adapter sleeve thread. They lock the nut in position when one of the washer tabs is bent into one of the slots in the outside diameter of the lock nut. A new lock washer should be used each time the corresponding lock nut is installed.
  
  [Features]
  ・Simple, stable and reliable fastening element
  ・Easy to install and remove
  ・Used for KM, KML, and HM .. T lock nuts

  Select to compare

  Configure now
  Starting from∗ ：	50.45 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  L-section rings

  SKF

  [Specifications]
  ・Inside diameter: 30 mm
  ・Outside diameter: 50.5 mm
  ・eClass code:
  ・23-05-09-01
  
  Angle rings (L-shaped thrust collars) are used either with NU design cylindrical roller bearings to locate the shaft axially in one direction, or with NJ design bearings to locate the shaft axially in both directions. The rings are made of carbon chromium steel and are hardened and ground. They are supplied as separate components.
  
  [Features]
  ・Locate the shaft axially if there are no NJ or NUP design locating bearings within the product range
  ・Provide an extended inner ring seat for heavily loaded bearings in the locating position
  ・Simplify design or mounting procedures

  Select to compare

  Configure now
  Starting from∗ ：	110.87 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  L-section rings EC Series / Internal diameter 55mm

  SKF

  [Specifications]
  ・Bore diameter: 55mm
  ・Outside diameter: 77.5 mm
  ・eClass code:
  ・23-05-09-01
  
  Angle rings (L-shaped thrust collars) are used either with NU design cylindrical roller bearings to locate the shaft axially in one direction, or with NJ design bearings to locate the shaft axially in both directions. The rings are made of carbon chromium steel and are hardened and ground. They are supplied as separate components.
  
  [Features]
  ・Locate the shaft axially if there are no NJ or NUP design locating bearings within the product range
  ・Provide an extended inner ring seat for heavily loaded bearings in the locating position
  ・Simplify design or mounting procedures

  Select to compare

  Configure now
  Starting from∗ ：	116.02 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  L-section rings ECVA301 Series / Internal diameter 90mm

  SKF

  [Specifications]
  ・Inside diameter: 90 mm
  ・Outside diameter: 124 mm
  ・eClass code:
  ・23-05-09-01
  
  Angle rings (L-shaped thrust collars) are used either with NU design cylindrical roller bearings to locate the shaft axially in one direction, or with NJ design bearings to locate the shaft axially in both directions. The rings are made of carbon chromium steel and are hardened and ground. They are supplied as separate components.
  
  [Features]
  ・Locate the shaft axially if there are no NJ or NUP design locating bearings within the product range
  ・Provide an extended inner ring seat for heavily loaded bearings in the locating position
  ・Simplify design or mounting procedures

  Select to compare

  Configure now
  Starting from∗ ：	233.53 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Plummer block housings / Composite / Outer diameter 164mm

  SKF

  [Specifications]
  ・Material: Composite
  ・Outer diameter(mm): 164
  ・eClass code: 23-05-08-02
  
  Pillow (plummer) block housings are designed to accommodate an insert bearing. Housings made of composite materials are lightweight but robust and have excellent corrosion resistance. They are suitable for most applications and can be bolted directly to a support surface.
  
  [Features]
  ・Excellent corrosion resistance
  ・Tolerant of high and low temperatures
  ・Lightweight
  ・Recyclable

  Select to compare

  Configure now
  Starting from∗ ：	14.88 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Plummer block housings M Series / Cast iron / Outer diameter 219mm

  SKF

  [Specifications]
  ・Material: Cast iron
  ・Outer diameter(mm): 219
  ・eClass code: 23-05-08-02
  
  Pillow (plummer) block housings are designed to accommodate an insert bearing. The cast iron housings are strong, stiff and cost-effective. They are suitable for most applications and can be bolted directly to a support surface.
  
  [Features]
  ・Accommodate heavy loads in different directions
  ・High degree of stiffness
  ・Narrow design

  Select to compare

  Configure now
  Starting from∗ ：	39.13 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Shim washers / Width 0.7mm

  SKF

  [Specifications]
  ・Width(mm): 0.7
  ・eClass code: 23-05-19-01
  
  SKF Machinery Shims are used to easily and reliably adjust the height of a machine. High quality shims allow accurate and long lasting height adjustments that save time and support reliable operation of the machine. Shims are supplied in packs of 10 and can be used to refill SKF Machinery Shim kits (assortments of different shim sizes and thickness).
  
  [Features]
  ・Easy to fit and remove
  ・Close tolerances for accurate adjustments
  ・Fully de-burred
  ・Supplied in packs containing 10 shims
  ・Thickness and size are clearly marked on the shim

  Select to compare

  Configure now
  Starting from∗ ：	22.12 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Tools

  SKF

  [Specifications]
  ・Case dimensions (l x h x w): 530 x 110 x 360 mm
  ・eClass code: 23-05-19-01
  
  SKF Machinery Shims are used to easily and reliably adjust the height of a machine. This assortment of high quality metric shims allows accurate and long lasting height adjustments of a very wide range of machines. SKF Machinery Shims help technicians to save time and support the reliable operation of their machine.
  
  [Features]
  ・Comprehensive assortment for many applications
  ・Easy to fit and remove
  ・Close tolerances for accurate adjustments
  ・Thickness and size are clearly marked on the shim and in the case
  ・Shim kit can be refilled with shim packs

  Select to compare

  Configure now
  Starting from∗ ：	1,374.28 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  Tools M / MV Series

  SKF

  [Specifications]
  ・Coil diameter: 140 mm
  ・Colour: Grey, Black
  ・eClass code: 23-05-19-01
  
  The SKF TIH 220M is a large induction heater and is designed for the hot mounting of bearings. This versatile heater is ideal for use on workbenches and can easily be transported to on-site applications with the optional heater trolley TIH T1. The heater has a convenient sliding yoke and is supplied with an additional smaller yoke. The TIH 220M can heat bearings with a minimum bore diameter of 60 mm and larger bearings with a maximum weight of 300 kg.
  
  [Features]
  ・Supplied with standard sliding yoke and one smaller yoke located in an integrated storage compartment
  ・Easy and safe to use with automatic temperature control or time controlled heating
  ・Automatic demagnetization reduces risk of bearing contamination
  ・Suitable for non-bearing applications for workpieces weighing up to 150 kg
  ・Automatic temperature hold function to keep the bearing hot after completion of the heating cycle

  Select to compare

  Configure now
  Starting from∗ ：	9,897.73 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Washers / Internal diameter 225mm

  SKF

  [Specifications]
  ・Internal diameter(mm): 225
  ・Outer diameter(mm): 312
  ・Width(mm): 45

  Select to compare

  Configure now
  Min. Shipping Days ：	Quote

• 

  L-section rings EC Series / Internal diameter 40mm

  SKF

  [Specifications]
  ・Internal diameter(mm): 40
  ・Outer diameter(mm): 54.1
  ・Width(mm): 8.5
  ・eClass code: 23-05-09-01
  
  Angle rings (L-shaped thrust collars) are used either with NU design cylindrical roller bearings to locate the shaft axially in one direction, or with NJ design bearings to locate the shaft axially in both directions. The rings are made of carbon chromium steel and are hardened and ground. They are supplied as separate components.
  
  [Features]
  ・Locate the shaft axially if there are no NJ or NUP design locating bearings within the product range
  ・Provide an extended inner ring seat for heavily loaded bearings in the locating position
  ・Simplify design or mounting procedures

  Select to compare

  Configure now
  Starting from∗ ：	68.30 €
  Min. Shipping Days ：	17 Days

  *Unit price with basic configuration

• 

  L-section rings ECVA301 Series / Internal diameter 70, 75mm

  SKF

  [Specifications]
  ・Internal diameter(mm): 70, 75
  ・Outer diameter(mm): 97.4, 104
  ・Width(mm): 15.5, 16.5

  Select to compare

  Configure now
  Starting from∗ ：	156.37 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Plummer block housings / Cast iron, Cast steel, Composite, Ductile cast iron / Outer diameter 70~380mm

  SKF

  [Specifications]
  ・Material: Cast iron, Cast steel, Composite, Ductile cast iron
  ・Outer diameter(mm): 70~380
  ・Width(mm): 32~95

  Select to compare

  Configure now
  Min. Shipping Days ：	4 Days

• 

  Plummer block housings M Series / Cast iron / Outer diameter 127, 130, 160mm

  SKF

  [Specifications]
  ・Material: Cast iron, Cast steel, Composite, Ductile cast iron
  ・Outer diameter(mm): 127, 130, 160
  ・eClass code: 23-05-08-02
  
  Pillow (plummer) block housings are designed to accommodate an insert bearing. The cast iron housings are strong, stiff and cost-effective. They are suitable for most applications and can be bolted directly to a support surface.
  
  [Features]
  ・Accommodate heavy loads in different directions
  ・High degree of stiffness
  ・Narrow design

  Select to compare

  Configure now
  Starting from∗ ：	14.55 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Shim washers / Width 0.2, 0.4mm

  SKF

  [Specifications]
  ・Width(mm): 0.2, 0.4
  ・eClass code: 23-05-08-02
  
  SKF Machinery Shims are used to easily and reliably adjust the height of a machine. High quality shims allow accurate and long lasting height adjustments that save time and support reliable operation of the machine. Shims are supplied in packs of 10 and can be used to refill SKF Machinery Shim kits (assortments of different shim sizes and thickness).
  
  [Features]
  ・Easy to fit and remove
  ・Close tolerances for accurate adjustments
  ・Fully de-burred
  ・Supplied in packs containing 10 shims
  ・Thickness and size are clearly marked on the shim

  Select to compare

  Configure now
  Starting from∗ ：	18.80 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Washers / Internal diameter 24~170mm

  SKF

  [Specifications]
  ・Internal diameter(mm): 24~170
  ・Outer diameter(mm): 35~220
  ・eClass code: 23-05-10-01
  
  Sphered seat washers are used together with thrust ball bearings with sphered housing washers when the bearing is fitted into a machine component manufactured with a flat surface. The seat washers are supplied as separate components. Depending on bearing series, they have the basic designation U 2, U 3 or U 4 followed by a two-digit number, which identifies the size, e.g. sphered seat washer U 320 for bearing 53320.
  
  [Features]
  ・Enable the bearings to accommodate initial misalignment
  ・Can be used with single or double direction bearings
  ・Enable full interchangeability of seat washers

  Select to compare

  Configure now
  Starting from∗ ：	12.66 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Lock washers / Steel stainless / Internal diameter 12~70mm

  ZEN

  [Specifications]
  ・Material: Steel (stainless)
  ・Internal diameter(mm): 12~70
  ・Outer diameter(mm): 25~98
  
  Lock washers from ZEN.

  Select to compare

  Configure now
  Starting from∗ ：	1.35 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Plummer block housings A Series / Plastic / Non-split

  ZEN

  [Specifications]
  ・Material: Plastic
  ・Splitting: Non-split
  ・A Series
  
  Plummer block housings of A Series from ZEN.

  Select to compare

  Configure now
  Starting from∗ ：	18.63 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Plummer block housings B Series / Plastic / Non-split

  ZEN

  [Specifications]
  ・Material: Plastic
  ・Splitting: Non-split
  ・B Series
  
  Plummer block housings of B Series from ZEN.

  Select to compare

  Configure now
  Starting from∗ ：	19.70 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Plummer block housings BLACK Series / Plastic / Non-split

  ZEN

  [Specifications]
  ・Material: Plastic
  ・Splitting: Non-split
  ・BLACK Series
  
  Plummer block housings of BLACK Series from ZEN.

  Select to compare

  Configure now
  Starting from∗ ：	17.84 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Plummer block housings WHITE Series / Plastic / Non-split

  ZEN

  [Specifications]
  ・Material: Plastic
  ・Splitting: Non-split
  ・WHITE Series
  
  Plummer block housings of WHITE Series from ZEN.

  Select to compare

  Configure now
  Starting from∗ ：	37.21 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Shaft trestles / Aluminium / Internal diameter 8~25mm

  ZEN

  [Specifications]
  ・Material: Aluminium
  ・Internal diameter(mm): 8~25
  ・Outer diameter(mm): 42, 60, 70
  
  Shaft trestles from ZEN.

  Select to compare

  Configure now
  Starting from∗ ：	5.02 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Plummer block housings BL Series

  SNR

  [Specifications]
  ・Material: Cast iron
  ・Internal diameter(mm): 150
  
  Plummer Block Housings SNOE 200 for bearings with cylindrical bore specified for oil lubrication.

  Select to compare

  Configure now
  Starting from∗ ：	3,986.05 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Plummer block housings CBF Series / Cast iron / Internal diameter 95~140mm

  SNR

  [Specifications]
  ・Material: Cast iron
  ・Internal diameter(mm): 95~140
  
  Split Plummer Blocks made of grey- or ductile cast iron for through shaft or shaft end.

  Select to compare

  Configure now
  Min. Shipping Days ：	4 Days

• 

  Plummer block housings CBL Series / Cast iron / Internal diameter 100~160mm

  SNR

  [Specifications]
  ・Material: Cast iron
  ・Internal diameter(mm): 100~160
  
  Split Plummer Blocks made of grey- or ductile cast iron for through shaft or shaft end.

  Select to compare

  Configure now
  Min. Shipping Days ：	4 Days

• 

  Tools AS-SCHP12T Series

  SNR

  [Specifications]
  ・Max range: 325 mm
  
  The accessory kit AS-SCHP is used with the SCHP hydraulic pullers to remove bearing rings, as a bearing puller.

  Select to compare

  Configure now
  Starting from∗ ：	983.58 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Tools AS-SCHP4T Series

  SNR

  [Specifications]
  ・Max range: 250 mm
  
  The accessory kit AS-SCHP is used with the SCHP hydraulic pullers to remove bearing rings, as a bearing puller.

  Select to compare

  Configure now
  Starting from∗ ：	295.08 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Tools FEELERGAUGES150 Series

  SNR

  [Specifications]
  ・Length: 150 mm
  
  These specially selected feeler gauges are available in lengths of 100,150 and 300 mm. They comprise 17 high-precision gauges from 0.02 to 0.50 mm. Each feeler gauge comes with spares for the five finest gauges.

  Select to compare

  Configure now
  Starting from∗ ：	38.73 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Tools LASERTEMP-301 Series

  SNR

  [Specifications]
  ・Length: 175 mm
  ・Width: 110 mm
  ・Height: 45 mm
  
  An ergonomic and easy-to-use laser-sighted thermometer for measuring temperatures up to 850°C.

  Select to compare

  Configure now
  Min. Shipping Days ：	Quote

• 

  Tools RING-HAMMER Series

  SNR

  [Specifications]
  ・Mass: 0,7 kg
  
  Tool Impact Ring Hammer - SNR

  Select to compare

  Configure now
  Starting from∗ ：	122.03 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Tools SCHP-12T Series

  SNR

  [Specifications]
  ・Max range: 325 mm
  ・Min shaft diameter: 80 mm
  ・Max shaft diameter: 225 mm
  
  The accessory kit AS-SCHP is used with the SCHP hydraulic pullers to remove bearing rings, as a bearing puller.

  Select to compare

  Configure now
  Min. Shipping Days ：	Quote

• 

  Tools SCHP-4T Series

  SNR

  [Specifications]
  ・Max range: 250 mm
  ・Min shaft diameter: 25 mm
  ・Max shaft diameter: 110 mm
  
  The accessory kit AS-SCHP is used with the SCHP hydraulic pullers to remove bearing rings, as a bearing puller.

  Select to compare

  Configure now
  Starting from∗ ：	708.31 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Tools SCMP2 / 3-180 Series

  SNR

  [Specifications]
  ・Max range: 120 mm
  
  In the self-centring pullers offered by NTN, the mechanical extractors are simple and rugged tools for easy dismounting without any risk to your bearings.

  Select to compare

  Configure now
  Starting from∗ ：	239.08 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Tools SCMP2 / 3-270 Series

  SNR

  [Specifications]
  ・Max range: 160 mm
  
  In the self-centring pullers offered by NTN, the mechanical extractors are simple and rugged tools for easy dismounting without any risk to your bearings.

  Select to compare

  Configure now
  Starting from∗ ：	343.07 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Strip P10 Series / Maintenance-free. for dry-running applications / Internal diameter 250mm

  PERMAGLIDE

  [Specifications]
  ・Material: Lead-free, Leaded
  ・Internal diameter(mm): 250
  ・Outer diameter(mm): 500
  ・Width(mm): 0.99, 1.97, 2.46
  
  KS PERMAGLIDE Strips PAS are available as an even material section. This material section can be used to make sliding elements in a variety of shapes.

  Select to compare

  Configure now
  Starting from∗ ：	115.05 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Strip P11 Series

  PERMAGLIDE

  [Specifications]
  ・Material: Leaded
  ・Internal diameter(mm): 160
  ・Outer diameter(mm): 500
  ・Width(mm): 0.99
  
  KS PERMAGLIDE Strips PAS are available as an even material section. This material section can be used to make sliding elements in a variety of shapes.

  Select to compare

  Configure now
  Starting from∗ ：	156.89 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Strip P14 Series / Maintenance-free. for dry-running applications / Internal diameter 180, 250mm

  PERMAGLIDE

  [Specifications]
  ・Material: Lead-free, Leaded
  ・Internal diameter(mm): 180, 250
  ・Outer diameter(mm): 500
  ・Width(mm): 0.99, 2.46
  
  KS PERMAGLIDE Strips PAS are available as an even material section. This material section can be used to make sliding elements in a variety of shapes.

  Select to compare

  Configure now
  Starting from∗ ：	89.48 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Thrust washer P14 Series / Maintenance-free. for dry-running applications / Internal diameter 12~62mm

  PERMAGLIDE

  [Specifications]
  ・Material: Lead-free, Leaded
  ・Internal diameter(mm): 12~62
  ・Outer diameter(mm): 24~90
  ・Width(mm): 1.5, 2
  
  [Features]
  ・Absorbing and transferring axial forces coming from one direction
  ・Fixing moving components to each other
  ・Ensuring axial guidance accuracy over the entire service life
  ・P14 Series

  Select to compare

  Configure now
  Min. Shipping Days ：	4 Days

• 

  Thrust washer P20 Series / Maintenance-free. for dry-running applications / Internal diameter 14~52mm

  PERMAGLIDE

  [Specifications]
  ・Material: Leaded
  ・Internal diameter(mm): 10
  ・Outer diameter(mm): 20
  ・Width(mm): 1.5
  
  [Features]
  ・Absorbing and transferring axial forces coming from one direction
  ・Fixing moving components to each other
  ・Ensuring axial guidance accuracy over the entire service life
  ・P20 Series

  Select to compare

  Configure now
  Min. Shipping Days ：	4 Days

Loading...