Clamping Levers（Page 2）

?* Information on days to ship and prices

• • Promotional pricing

  

  All Stainless Steel Mirror Clamp Lever MRSS, MFSS

  KONISHI MFG

  All stainless steel mirror clamp lever used for fixing the position. Since the lever becomes free, when it is lifted upwards and the serration (gear cutting portion) inside the lever comes off, smooth tightening operation is possible by moving the lever to a position that is always easy to operate. Since all parts including the lever part are stainless steel, it has excellent rust prevention properties.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	31.83 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Clamp Lever KR, KF

  KONISHI MFG

  Lever used for fixing the position. Since the lever becomes free when it is lifted upwards and the serration (gear cutting portion) inside the lever comes off, smooth tightening operation is possible by moving the lever to a position that is always easy to operate. Amongst the products with 5 different types of turning radius, select the one that can be used with the appropriate load.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	15.42 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cam Clamp Module Shaft Hole Type

  HALDER

  [Features]
  · Clamp effect is the same at any angle; self-locking.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.53 €
  Min. Shipping Days ：	2 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Quick Clamp, Clamp Lever Included

  HALDER

  [Features]
  · This quick clamp tights work to the fixed surface while also supporting the work facing down.
  · Low profile design and so is suitable for machining the entire surface of the work.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	174.33 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Swing Clamp Size 40

  HALDER

  [Features]
  · The clamp can be tightened quickly using the bolt or clamp lever or eccentric lever
  · Swiveling the clamp arm to the right or left enables simple and quick replacement of the work.
  · Clamp position is infinitely adjustable through use of the positioning ring EH23310.0350 and the clamp arm can be brought repeatedly to the same position.
  · If a positioning ring is used, dimension h2 gets 7 mm larger (spoke s gets smaller by 7 mm).
  · Compact, so clamping is feasible in a narrow space.
  · Clamping at a high position is simple using the height adjustment cylinder.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	247.66 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Position Adjustable Clamping Lever Screw Included, Internal Parts, Stainless Steel

  HALDER

  [Features]
  · When the lever is pulled up the serrations disengage enabling freely changing of the lever position.
  · If the lever is released, it returns to meshed status.
  · Threaded part can be replaced
  · Internal parts are made of stainless steel.
  [Applications]
  · Clamping lever for adjusting lever position.
  · Has a variety of uses including for medical devices and in the chemical industry.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.63 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Position Adjustable Clamping Lever Nut Included Thrust Bearing Included

  HALDER

  [Features]
  · Clamping lever enabling adjusting the lever position.
  · Internal parts are made of stainless steel.
  · Has a variety of uses including for medical devices and in the chemical industry.
  · When the lever is pulled up the serrations disengage, letting you freely change the lever position.
  · If the lever is released, it returns to meshed status.
  · The threaded part can be replaced.
  · Losses due to friction of the seat are reduced so twice the tightening force is achievable with the same lever.
  · No scratches formed on the applicable parts as the seat surface does not move.
  · A high amount of pretension can be applied to the threaded part so it will not readily loosen.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	19.72 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Adjustable flat tension levers with threaded stud, Steel

  GANTER

  The overall height of flat tension levers GN 125 is reduced to a minimum.
  As all other adjustable levers, they are ideal when-ever parts have to be clamped in a confined space, or a particular lever position is required. The threaded insert is connected with the hub via serrations which can be disengaged.
  Pulling the lever, disengages the serrations and the lever can be swivelled to the ideal clamping position. On releasing the lever it will automatically re-engage.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	25.16 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Clamping levers with eccentrical cam with threaded stud, Lever steel

  GANTER

  Clamping levers with eccentrical cam GN 927.3 are used for rapid clamping and releasing. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
  The lever has been designed to ensure that its movement cannot exceed the max. clamping force.
  There are no loose components since they are all assembled and mounted in their correct order.
  Type A has the following benefits:
  The distance between the lever cam and the clamping surface is adjustable via a fine pitch thread, allowing the clamping position to be set easily with maximum clamping force. Also, the position of the lever relative to the clamping axis can be determined.
  With these clamping levers with eccentrical cam GN 927.3, clamping forces of up to 8 kN can be reached.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.62 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Clamping lever plastic with external thread, steel parts blue passivated (K1702)

  KIPP

  · 7 colour variants

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.84 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping levers external thread (06430)

  NORELEM

  · The KIPP clamping lever stands for reliability, stability and versatility
  
  · Makes it easier to clamp individual components and complete machine parts
  
  · Application fields: machine construction, plant construction, rehabilitation and medical technology, furniture industry
  
  · Colour: black satin finish or silver metallic
  
  · Different thread sizes and handle lengths

  Select to compare

  Configure now
  Starting from∗ ：	7.38 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Zinc clamping lever with female thread and clamping force intensifier (06451)

  NORELEM

  · Significant increase of the clamping force with the same tightening torque
  
  · High quality axial needle bearing with high load rating and long service life
  
  · The component surface is protected by the stationary lower ring

  Select to compare

  Configure now
  Starting from∗ ：	35.19 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Safety Resin Clamp Levers

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.08 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Flat Tension Levers

  MISUMI

  [Features] It is a universal flat clamping lever.

  • Volume Discount

  • Order quantities extended (D-JIT)
  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	27.07 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Flat Tension Levers / With Hexagonal Socket Head / Threaded

  MISUMI

  A flat clamping lever with a hexagon socket head. [Clamp type]Clamping mechanism

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	24.81 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Clamp Lever (KF, KR)

  IMAO CORPORATION

  In this type of lever handle, when the lever is pulled, the serrations engaged with each other are disengaged. The standard type that boasts steady popularity.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.44 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Ergo Adjustment Clamp Lever (EAL)

  IMAO CORPORATION

  Lever with curves coordinated design. Normally, the lever part is free, and when the lever is pushed down, the serration can be engaged and operated,
  which prevents incorrect handling after tightening.
  
  [Features]
  · Curved design of the entire lever part gives a comfortable grip feeling.
  · Initial tightening work can be done comfortably as the knurling is applied on the lower part of the mail body.
  · The standard color of the button is orange, however, black, gray, yellow, light blue, and red are also accepted as customized orders.
  · We accept additional work

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.05 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Clamping Lever

  HALDER

  [Features]
  · When the lever is pulled up the serrations disengage enabling arbitrary rotating of the lever.
  · When the lever is released the serrations mesh.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.80 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  For Axle Pin Eccentric Lever

  HALDER

  [Features] Used together with parts such as eccentric lever EH23390.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.83 €
  Min. Shipping Days ：	2 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Ball levers, Steel

  GANTER

  The official DIN standard sheet specifies additional sizes 200 - M24 / B24.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	9.82 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Clamping bolts, downward clamping, Stainless Steel

  GANTER

  Stainless Steel-Clamping bolts GN 918.7 have a circumferential wedge surface, allowing the rapid and safe clamping and releasing at a relatively large adjustable range and with high clamping force. Owing to the small pitch angle (wedge angle), the eccentric cam is self-arresting.
  The ball lever is linked with the clamping bolt via a serrated ratchet, allowing the adjustment of the most suitable clamping position or the „readjustment“ of the handle.
  Screw bolt and washer (see technical instructions) are matched to ensure that the clamping bolt can be easily turned after tightening. Using a washer requires no special requirements in terms of the threaded hole design. This means it can also be mounted on tables using T grooves.
  Clamping bolts have the advantage that they can be turned after releasing in the clamping zone.
  The use of GN 605 ball point screws with flattened ball is recommended in connection with the clamping bolts.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	83.52 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Clamping levers with eccentrical cam with internal thread, Lever steel

  GANTER

  Clamping levers with eccentrical cam GN 927.3 are used for rapid clamping and releasing. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
  The lever has been designed to ensure that its movement cannot exceed the max. clamping force.
  There are no loose components since they are all assembled and mounted in their correct order.
  Type A has the following benefits:
  The distance between the lever cam and the clamping surface is adjustable via a fine pitch thread, allowing the clamping position to be set easily with maximum clamping force. Also, the position of the lever relative to the clamping axis can be determined.
  With these clamping levers with eccentrical cam GN 927.3, clamping forces of up to 8 kN can be reached.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.22 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Eccentrical cams, radial clamping, Stainless Steel

  GANTER

  Eccentrical cams GN 918.5 allow the rapid and safe clamping and releasing at a relatively large adjustable range and with high clamping force. The cam not only has the advantage that the clamping effect is of the same magnitude over the whole of the clamping surface (i.e. in every angular position), but also that it is self-arresting in every position.
  The ball lever is linked with the eccentric cam via a serrated ratchet, allowing the adjustment of the most suitable clamping position or the "readjustment" of the handle.
  Screw bolt and washer (see technical instructions) are matched to ensure that the eccentric cam can be easily turned after tightening. Using a washer requires no special requirements in terms of the threaded hole design. This means it can also be mounted on tables using T grooves.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	80.88 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  Stainless Steel-Clamping levers with eccentrical cam

  GANTER

  Stainless Steel-Clamping levers with eccentrical cam GN 927.7 are used for rapid clamping and releasing. Hereby, contrary to a clamping operation via a thread, these levers permit a torque-free clamping.
  The lever has been designed to ensure that its movement cannot exceed the max. clamping force.
  There are no loose components since they are all assembled and mounted in their correct order.
  Type A has the following benefits:
  The distance between the lever cam and the clamping surface is adjustable via a fine pitch thread, allowing the clamping position to be set easily with maximum clamping force. Also, the position of the lever relative to the clamping axis can be determined.
  With these clamping levers with eccentrical cam GN 927.7, clamping forces of up to 8 kN can be reached.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	21.02 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  ERF. - Lever handles -Technopolymer

  ELESA

  Lever handles.
  Glass-fibre reinforced polyamide based (PA) technopolymer, grey-black colour, matte finish.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.20 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing

  

  ERZ. - Adjustable handles -Technopolymer steel or stainless steel clamping element

  ELESA

  Adjustable handles.
  Glass-fibre reinforced polyamide based (PA) technopolymer, grey-black colour, matte finish. Built-in zinc alloy toothed insert for coupling to the metal clamping element.
  Indicated when the lever turning angle is limited owing to lack of space.
  Retaining screw with six-lobed socket to fit TORX® tool

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.08 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Adjustable hand levers for set collars (GN 311)

  GANTER

  For set collars of the standard families GN 706... and GN 707..., the adjustable hand levers GN 311 replace the hexagon socket screw DIN 912. That allows the set collars to be adjusted easily and quickly without tools.The table of dimensions of the set collars shows the corresponding hand lever for the respective set collar size d1.Under GN 706.4, semi-split set collars GN 706.2 are generally offered with clamping levers.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.40 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Flat adjustable hand levers, Zinc die casting, threaded stud Stainless Steel (GN302.1)

  GANTER

  Adjustable hand levers GN 302.1 have a straight lever, not inclined, being parallel to the clamping space.Adjustable hand levers are ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.Pulling the lever, disengages the serrations and allowing it to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.86 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cam levers double (K0009)

  KIPP

  · Cam levers are used for quick and torque-free clamping
  
  · Workpiece needs no further securing
  
  · Easy to operate
  
  · High clamping forces
  
  · Application sectors: machine construction, toolmaking, fixture construction

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	36.66 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping levers external thread, steel parts stainless steel (K0123)

  KIPP

  · The KIPP clamping lever stands for reliability, stability and versatility
  
  · Makes it easier to clamp individual components and complete machine parts
  
  · Application fields: machine construction, plant construction, rehabilitation and medical technology, furniture industry
  
  · Different thread sizes and handle lengths

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.30 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping levers with plastic handle external thread (K0269)

  KIPP

  · The KIPP clamping lever stands for reliability, stability and versatility
  
  · Makes it easier to clamp individual components and complete machine parts
  
  · Application fields: machine construction, plant construction, rehabilitation and medical technology, furniture industry
  
  · The NOVO grip product range represents an attractive design and an easy-to-grip form
  
  · 7 colour variants

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.04 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Clamping levers plastic with safety function with male thread (06613)

  NORELEM

  · Protection against accidental opening or closing
  
  · Closed grip contour without protruding edges

  Select to compare

  Configure now
  Starting from∗ ：	6.24 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Tension Levers in stainless steel with external thread, 0 degrees (06381)

  NORELEM

  · The clamping lever represents reliability and a high level of stability
  
  · Makes it easier to clamp individual components and complete machine parts
  
  · Application fields: machine construction, plant construction, rehabilitation and medical technology, furniture industry
  
  · Material: 1.4305 stainless steel, corrosion resistant
  
  · Different thread sizes and handle lengths

  Select to compare

  Configure now
  Starting from∗ ：	35.37 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Cam levers double (04310)

  NORELEM

  · Cam levers are used for quick and torque-free clamping
  
  · Workpiece needs no further securing
  
  · Easy to operate
  
  · High clamping forces
  
  · Application sectors: machine construction, toolmaking, fixture construction

  Select to compare

  Configure now
  Starting from∗ ：	43.99 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Tension lever for rotary lever clamps, form A standard (04624)

  NORELEM

  Select to compare

  Configure now
  Starting from∗ ：	57.08 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Adjustable handles, steel with internal thread, satin finish - inch (06442)

  NORELEM

  Select to compare

  Configure now
  Starting from∗ ：	12.60 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Y-Shaped Clamp Levers

  MISUMI

  A Y-shaped clamping lever. [Features]Working direction: horizontal. -Mounting part type: External thread.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.06 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Miniature Resin Clamp Levers

  MISUMI

  A miniature clamping lever made of resin. [Clamp type]Clamping mechanism, "working direction" horizontal.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.64 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Cam Lever _LZX

  NABEYA BI-TECH

  [Product information]
  · Lever type lever, or leverless
  · Material: Stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	114.30 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Cam Lever (ECL, ECLN)

  IMAO CORPORATION

  Resin type cam lever. With adjustment ring (with adjustment), the tightening force and the operating position of the lever can be adjusted arbitrarily.
  
  [Features]
  · Curved design of the entire lever part gives a comfortable grip feeling.
  · ECL type. By rotating the knurled adjustment ring, the tightening force and lever operating position can be adjusted arbitrarily.
  · Fine adjustment is possible without using tools

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	17.30 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Ergo Adjust Clamp Lever (with Hexagon Socket) (EALA)

  IMAO CORPORATION

  Lever with curves coordinated design. .Even though the lever part is free, when the lever is pushed down, the serrations can be engaged with each other, so it is possible to prevent contact malfunction after tightening.
  
  [Features]
  · Curved design of the entire lever part gives a comfortable grip feeling.
  · We accept additional work

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.42 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Fixed Lever (FLR, FLS)

  IMAO CORPORATION

  Zinc die casting lever handle that is widely used. There is a round hole type and a square hole type.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.63 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Flat Tension Lever (FTF, FT)

  IMAO CORPORATION

  In this type, when the lever is pulled the serrations mesh and the lever becomes free. Since the height of the main body is low and the lever angle is also 0°, it is ideal to have no space above and below.
  
  [Features]
  · Since the height of the main body is low and the lever angle is also 0°, it is ideal to have no space above and below.
  · If interference of the lever occurs during operation, a short lever can be installed and used

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	36.04 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Stainless Steel Clamp Lever KRS, KFS

  KONISHI MFG

  Stainless steel lever used for fixing the position. Since the lever becomes free when it is lifted upwards and the serration (gear cutting portion) inside the lever comes off, smooth tightening operation is possible by moving the lever to a position that is always easy to operate. Since the threaded part and spring are stainless steel, it has excellent rust prevention.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	30.02 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing

  

  Fixed Lever FLR, FLS

  KONISHI MFG

  Lever used for fixing the position. Type that can be used by directly attaching it to a round shaft or a square shaft.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	7.96 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...