Insert

?* Information on days to ship and prices

• 

  Self-Tapping Inserts / Slotted

  MISUMI

  It is a split groove threaded insert, threaded on both the inner and outer diameters.
  Fasteners that do not require a front force strip to compensate for the mechanical strength of threaded sections made of materials with relatively low strength.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.24 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Dodge Bit Insert (Standard) SB Brass (Cadmium-Free)【1-8,000 Pieces Per Package】

  TOKAI METAL INDUSTRY

  A general-purpose well-balanced screw insert with low cost.
  [Features]
  ・ At the time of press-fit, the product has direction.
  ・ An insert nut that is well balanced in all aspects including easy use, holding power, cost, etc.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.16 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Tangless Inserts Installation / Removal Tools

  MISUMI

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	164.48 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Thread Inserts

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.03 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ensat, Ultra Coarse Outside Screw, Type 309

  KKV

  Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.50 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ultrasert UD2 / UD4 (Brass Cadmium-Free)【1-5,000 Pieces Per Package】

  TOKAI METAL INDUSTRY

  These inserts are the best choice for easy and secure fitment into plastic holes.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.20 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Thread Inserts / Tangless

  MISUMI

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.90 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Insert Phosphor Bronze

  RECOIL

  Electrical junction joint up to 300 °C. Insert for non-magnetic application (Helisert and sprue).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.98 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ensat, Slotted Type 302

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  • Stock

  Select to compare

  Configure now
  Starting from∗ ：	0.48 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Insert Nitronics 60

  RECOIL

  Insert to prevent screw galling (seizing). No lubricating oil required. (Helisert and sprue).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.58 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Threaded inserts self-tapping with cutting slot (K0978)

  KIPP

  [Specifications]
  ・Version 1: Self-tapping
  ・Version 2: With cutting slot
  ・Material: Stainless steel, Steel
  ・Surface finish body: Bright, galvanised
  ・D1=Internal thread: M3-M16
  
  [Features]
  ・For making high-strength screw connections in materials with low shear strength
  ・Guarantees secure and firm anchoring in the host material
  ・Ideal for difficult-to-machine materials
  ・Version: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.36 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Stainless Steel / Insert Nut Threaded Type / IRU

  HIROSUGI-KEIKI

  [Nominal of Thread (M)] 2/2.5/2.6/3/4/5/6/8
  [Material] Free-Cutting Stainless Steel (SUS303)
  [Processing] Degreasing

  Select to compare

  Configure now
  Starting from∗ ：	0.98 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Ensat Three-Hole / Short 307 Type

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.82 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Brass Bit Insert (Flanged) / HFB

  HIROSUGI-KEIKI

  [Nominal of Thread (M)] 2/2.6/3/4/5
  [Material] Brass (C3604BD), Cadmium Content Less than 75 ppm
  [Processing] Degreasing

  Select to compare

  Configure now
  Starting from∗ ：	0.42 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Sparrow (Type SP)

  JAPAN DRIVE-IT

  [Type] Press Fit Use
  [Application] Resin: General
  [Materials] Brass
  [Screw type] Metric (coarse) screw, without notch
  [Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 3.5, 4, 5, 6, Length (following insertion)
  [L](D = screw diameter M) 1D 1.5D 2D
  [Length] B (mm) 4.1 5.3 6.2 7.4 8.3 9.2

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.31 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Dodge Bit Insert Flange Type (Brass Cadmium-Free)【1-5,000 Pieces Per Package】

  TOKAI METAL INDUSTRY

  General purpose type. Low cost and well balanced.

  • Volume Discount

  • Stock

  Select to compare

  Configure now
  Starting from∗ ：	0.29 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Ensat, Type 308, 3-Hole / Long Size

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.93 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Techlock (SL)【1-5,000 Pieces Per Package】

  JAPAN DRIVE-IT

  [Type] Press Fit
  [Materials] Brass
  [Screw type] Metric (coarse) screw, without notch
  [Shape] Standard Screw Diameter (after insertion) M (mm): 2 2.5 2.6 3 3.5 4 5 6 8 10 Length (after insertion)
  [L](D = Screw Diameter M) 1 D 1.5 D 2 D 2.5 D
  [Length]B (mm) 3.0 3.9 4.0 4.9 5.0 5.8

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.22 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  DIN 7965 Screwed inserts

  REYHER

  RAMPA couplings; Screwed inserts; Slotted nuts

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.36 €
  Min. Shipping Days ：	2 Days

  *Unit price with basic configuration

• 

  Serrated locking plates, Stainless Steel

  GANTER

  With the aid of Stainless Steel-Serrated locking plates GN 187.4 standard components can be interlocked and firmly set at a defined angle.
  The angular position of the fixing bores in relation to the serrations is not defined in the standard design. The exact positioning is available as special design.
  The range of designs makes these plates adapt-able for almost any application in this particular field. To complement these serrated locking plates, accessories such as guide pots GN 187.1 and thrust springs GN 187.2 are useful additional standard parts.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.38 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Threaded inserts self-tapping with cutting bores (K0979)

  KIPP

  [Specifications]
  ・Version 1: Self-tapping
  ・Version 2: With cutting bore
  ・Material: Stainless steel, Steel
  ・D1=Internal thread: M3-M12
  
  [Features]
  ・For making high-strength screw connections in materials with low shear strength
  ・Guarantees secure and firm anchoring in the host material
  ・Ideal for difficult-to-machine materials
  ・Version: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.51 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Self-Tapping Inserts Installation Tool

  MISUMI

  Compatible thread inserts are M3, 4, 5, 6, 8, 10 and 12.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	100.97 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Tangless Insert Insertion Tool

  ACCURATE

  A tangless insert metric coarse insertion tool.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	112.69 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Recoil-Free (mm) SUS304【1-3 Pieces Per Package】

  RECOIL

  Made from regular 304 grade stainless steel (18–8), but inserts made from other application-specific materials are also manufactured.

  • Volume Discount

  • Stock

  Select to compare

  Configure now
  Starting from∗ ：	0.33 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel / Aluminum Insert Nut Threaded Type (Loosening Prevention / Slotted) / IRU-SW

  HIROSUGI-KEIKI

  [Nominal of Thread (M)] 2.6/3/4/5/6/8
  [Material] Free-Cutting Stainless Steel (SUS303)
  [Processing] Degreasing

  Select to compare

  Configure now
  Starting from∗ ：	1.70 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Thread Insert Installation Tool

  MISUMI

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	91.10 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stainless Steel / Insert Nut Threaded Type (Slotted) / IRU-S

  HIROSUGI-KEIKI

  [Nominal of Thread (M)] 2.6/3/4/5/6/8
  [Material] Free-Cutting Stainless Steel (SUS303)
  [Processing] Degreasing

  Select to compare

  Configure now
  Starting from∗ ：	1.34 €
  Min. Shipping Days ：	12 Days

  *Unit price with basic configuration

• 

  Ensat Expanded Slot Type, Model 302, Inch Type

  KKV

  [Features]
  · Can be used for free-cutting type aluminum alloy, high-plasticity resin, etc.
  · The expanded slots act as cutting edges and are long in length, providing good engagement with the corresponding material.
  · If you set a small pilot hole diameter and insert into a hard material, the slots on the tip will contract (taper), potentially leading to defective machining.
  
  [Materials]
  SUM22L free-cutting steel (equivalent), hexavalent chromate

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.89 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Serrated locking plates, Sintered Steel

  GANTER

  With the aid of serrated locking plates GN 187.4 standard components can be interlocked and firmly set at a defined angle.
  The angular position of the fixing bores in relation to the serrations is not defined in the standard design. The exact positioning is available as special design.
  The range of designs makes these plates adapt-able for almost any application in this particular field. To complement these serrated locking plates, accessories such as guide pots GN 187.1 and thrust springs GN 187.2 are useful additional standard parts.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.52 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Threaded inserts reinforced internal thread self-locking (K0402)

  KIPP

  [Specifications]
  ・Version 1: Self-locking
  ・Version 2: Reinforced
  ・Material: Stainless steel
  ・Core drill φ(mm): 6.9-28
  ・Surface finish body: Passivated
  
  [Features]
  ・Enables tapped holes which have been damaged to be used again or repaired
  ・Suitable for use in various materials
  ・Quick and easy installation
  ・No other special tools are needed besides the assembly tool

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.99 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Threaded inserts with internal thread self-locking (K0401)

  KIPP

  [Specifications]
  ・Version 1: self-locking
  ・Material: Stainless steel
  ・Surface finish body: passivated
  ・D1=Internal thread: M5-M12
  
  [Features]
  ・Enables tapped holes which have been damaged to be used again or repaired
  ・Suitable for use in various materials
  ・Quick and easy installation
  ・No other special tools are needed besides the assembly tool

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.99 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  TEC Sonic (TEC Type)【1-500 Pieces Per Package】

  JAPAN DRIVE-IT

  [Type] Press Fit
  [Materials] Brass
  [Screw type] Metric (coarse) screw, without notch
  [Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 2.5, 3, 4, 5, 6, 8, Length (following insertion)
  [L](D = screw diameter M) 1.5D 2D 2.5D
  [Length] B (mm) 3.9 5.7 8.2 9.5 12.7

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.34 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Thread Insert Removal Tool

  MISUMI

  • Volume Discount

  • Stock

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	30.36 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Insert, Inconel X-750

  RECOIL

  The color of the main body will become silver when the method of heat treatment changes.
  
  Not plated. (Inconel Black Recoil)
  An insert (Helisert/Sprue) for use at high temperatures (425–550°C) and with non-magnetic applications.
  
  [Features]
  · Nickel alloy.
  · For use at high temperatures (425–550°C [800–1,000°F]) and with non-magnetic applications.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	21.79 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Ensat, Chip-Free / Long, Type 338

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	1.06 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Flat Head Sonic Lock (Type SHK)

  JAPAN DRIVE-IT

  [Type] Press Fit
  [Materials] Brass
  [Screw type] Metric (coarse) screw, without notch
  [Shape] Standard, Screw Diameter (following insertion) M (mm), 2, 3, 4, 5, 6, 8, Length (following insertion)
  [L](D = screw diameter M) 1.5D 2D

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.37 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Ensat, 3-Hole / Long Size, 308 Type, Stainless Steel

  SUNCO

  [Nominal M] 16
  [Material] Stainless Steel
  [Surface Processing] None

  • Volume Discount

  • Stock

  Select to compare

  Configure now
  Starting from∗ ：	19.82 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel-Serrated locking plates, for welding (GN 188)

  GANTER

  With the aid of Stainless Steel-Serrated locking plates GN 188, standard components can be interlocked and firmly attached in defined angular increments. They are joined by welding.The toothing is positioned exactly on the alignment holes d4, which guarantees a parallel or right-angled arrangement.The thrust spring is placed between the toothed discs during assembly and ensures that the toothed discs separate properly when loosening. The scope of delivery includes two serrated locking plates, one thrust spring and, depending on the version, a threaded bushing.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.36 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  C Lock (CL Type)【100 Pieces Per Package】

  BOHSEI

  The outer knurled form is reversed, which allows for high tensile strength and torque strength.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	12.45 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Threaded inserts reinforced (K0399)

  KIPP

  [Specifications]
  ・Version 1: Reinforced
  ・Material: Steel, Stainless steel
  ・Core drill φ(mm): 6.9-31
  ・D1=Internal thread: M4-M24x2
  
  [Features]
  ・Stronger cross section for inserts with an increased load
  ・Enables tapped holes which have been damaged to be used again or repaired
  ・Suitable for use in various materials
  ・Quick and easy installation
  ・No other special tools are needed besides the assembly tool

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.69 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Tangless Insert Tool Replacement Hook (for Insertion Tools)

  ACCURATE

  A replacement hook for tangless insert metric coarse insertion tools. Replace the hook when it becomes damaged or worn.

  Select to compare

  Configure now
  Starting from∗ ：	107.39 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Tangless Insert

  RECOIL

  The stress is dispersed throughout the entire engagement length, does not incur screw thread breaks, has increased holding power or tensile strength, and has greater fastening power than the original screw.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.50 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Brass, Ensat, Screw Plastic Deformation, Type 305

  KKV

  Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Reinforcing female screws using Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat is an insert nut with high workability usable for resin, aluminum, etc., which easily causes female screws to be destroyed when directly tapped.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.50 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Iron, Ensat, with Pin / Long Type 318

  KKV

  Ensat is an insert nut with high workability usable with resin, aluminum, etc., which easily cause female screw destruction with direct tap. It cuts material with the blade on its body, so no front tap is needed. Female screw reinforcement by Ensat enables aluminum and resin to be used for parts, which contributes to weight reduction. Ensat supports the force applied to the inner screw with a slightly larger outer screw, so it can endure a stronger force than a direct tap.

  Select to compare

  Configure now
  Starting from∗ ：	5.73 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Heat Lock (Type HL)【1-1,000 Pieces Per Package】

  JAPAN DRIVE-IT

  · Type: Press fit use
  · Application: Resin, general
  · Material: Brass
  · Thread ridge type: Metric coarse screw, without notch
  · Shape: Standard
  · Diameter (following insertion): M3, M3.5, M4, M5, M6
  · Length following insertion (D = screw diameter M): 1.5D, 2D
  · Length (mm): 4.0, 5.8, 7.2, 8.2, 9.5, 12.7

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	0.56 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...