Rubber Seal（Application：Reciprocating Motion）

?* Information on days to ship and prices

• 

  USH, Piston / Rod Seal Dual Use Packing (Integrated Groove Mounting)

  NOK

  · Usable for both piston seal and rod seal.
  · Designed with a small cross-section to allow integrated groove mounting.
  · This packing is a smaller cross-section version of the UPH type.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.36 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  SKY Packing for Hydraulic Pressure

  SAKAGAMI SEISAKUSHO

  The most popular packing for hydraulic cylinders. Can be used for pistons and rods. Can be installed in single grooves.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.30 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  SDR Scraper

  SAKAGAMI SEISAKUSHO

  Prevents dust from entering from the outside to protect packings and bearings. A popular embedded dust seal for cylinders, mainly used in normal indoor atmospheres.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.23 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  SER Scraper

  SAKAGAMI SEISAKUSHO

  Protects packing or bearing by preventing intrusion of external dust. Fit-in type with small cross section for cylinders used mainly in normal indoor atmosphere.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.40 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  LBH, Dust Seal (Integrated Groove Mounting)

  NOK

  ▪ This is a seal to prevent dust getting in, in order to protect equipment and maintain the function of packing.
  ▪ Can be mounted to integrated groove.
  · This is a rubber dust seal with double lip to prevent oil spilling.
  ▪ Nitrile rubber and fluorine rubber are available, so it can be used in a wide range of temperature conditions.

  • Volume Discount

  • Stock

  Select to compare

  Configure now
  Starting from∗ ：	5.51 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  SDB Scraper

  SAKAGAMI SEISAKUSHO

  Prevents dust from entering from the outside to protect packings and bearings. Mainly used to keep outside liquids like cutting fluid out. Rubber-coated at outer ring circumference.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	14.46 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  ISI, Rod Seal Dedicated Packing

  NOK

  · Designed with a small cross-section to allow integrated groove mounting.
  ▪ This packing is a smaller cross-section version of the IDI type.
  ▪ U641 with excellent heat resistance is also available.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.89 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  OSI Piston Seal Packing (Integrated Groove Mounting)

  NOK

  ▪ Designed with a small cross-section, it allows for integrated groove mounting.
  · This packing has a smaller cross-section version of the ODI type.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.07 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  [Air Pressure Use] MY Packing

  SAKAGAMI SEISAKUSHO

  Small-diameter U packing for pneumatic applications. The groove of the mini Y packing series is compatible with the O-rings of the JIS B2401-P series.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.06 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  SCK Scraper

  SAKAGAMI SEISAKUSHO

  Can also prevent dust from entering from the outside to protect the packing or bearing. Design specifically prevents water intrusion from the groove outer circumference side due to an insertion type dust seal with a large cross-sectional area .
  
  [Features]
  · 13Cr stainless steel mesh is mainly used for primary components, allowing high temperature fluids up to 350°C to be used.
  · Special liquids can be handled by changing the packing, gasket or main part.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.58 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  UPH, Piston / Rod Seal Dual Use Packing

  NOK

  · Usable for both piston seal and rod seal.
  ▪ Designed with a large cross-section so that it can be used for wide range of applications.
  · Nitrile rubber and fluorine rubber are available, so it can be used in a wide range of temperature conditions.
  ▪ Wide range of sizes are available.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.66 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  [Air Pressure Use] GLY Packing

  SAKAGAMI SEISAKUSHO

  Dual use packing for pistons and rods used in pneumatic cylinders. Exclusively for use with oil-free applications; cannot be used with oil supply cylinders.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.24 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  [Heavy Load Use] SW Wear Ring

  SAKAGAMI SEISAKUSHO

  A piston bearing made of fiber-reinforced phenolic resin that exhibits excellent load tolerance. Prevent seizing and galling of the piston that can be integrally attached to a groove. This SW wear ring is primarily for use with hydraulic cylinders.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	10.69 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  [Oil Pressure Use] KY Packing

  SAKAGAMI SEISAKUSHO

  Wide range of sizes available; offers stable performance in a wide range of applications thanks to its large cross-sectional design.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	6.66 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  [Air Pressure Use] PSD Packing

  SAKAGAMI SEISAKUSHO

  Compact double pressure type packing for pistons. Cross-sectional profile designed for better friction properties than O-ring to suppress occurrence of rotation and torsion.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.64 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  SFR Scraper

  SAKAGAMI SEISAKUSHO

  It can also prevent dust from entering from the outside to protect the packing or bearing. Special low friction pneumatic type. Mainly used for cylinders that are used under ordinary atmospheric conditions.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.93 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  HSD Packing for Hydraulic Pressure

  SAKAGAMI SEISAKUSHO

  A double pressure packing to enable thin-wall piston design. Compared to O-rings, this packing demonstrates a stable sealing performance without twisting or rolling damage.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.20 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  PS Penta Seals for Hydraulic Pressure

  SAKAGAMI SEISAKUSHO

  This is a rod-dedicated packing that is compatible with O-rings of the JIS B 2401 P series. This packing has better sealing properties than O-rings. Does not cause twisting or rolling damage.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.40 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  [Oil Pressure Use] WPB E-Sleeve

  SAKAGAMI SEISAKUSHO

  A multi-use piston bearing with back-up ring, for use with packings groove compatible with SKY packing. Can be mounted to an integrated groove.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.98 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  [Oil Pressure Use] GNY Packing

  SAKAGAMI SEISAKUSHO

  Dedicated packing for use with rods that employs abrasion-resistant materials. Has higher cross-sectional dimensions relative to diametrical dimensions than SKY packing for increased durability, sealing properties, and eccentricity conformability.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	9.54 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  [Oil Pressure Use] ST Seal

  SAKAGAMI SEISAKUSHO

  Seal combining an Esflon (PTFE) seal ring and synthetic rubber O-ring. Low-friction design that prevents stick-slip behavior even at low pressure and low speed.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	11.55 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  [Air Pressure Use] PDU Packing

  SAKAGAMI SEISAKUSHO

  Dust seal with packing for compact mounting spaces.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.58 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  SCB Scraper

  SAKAGAMI SEISAKUSHO

  Protects packing or bearing by preventing intrusion of external dust. Metal ring baked type equipped by press fit in a groove. Usable under exposure to dust, earth and sand, rain water, etc.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	9.09 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  [Light Load] SWA Wear Ring

  SAKAGAMI SEISAKUSHO

  A piston bearing made of fiber-reinforced phenolic resin that exhibits excellent load tolerance. Prevent seizing and galling of the piston that can be integrally attached to a groove. Used in low-hydraulic pressure cylinders and pneumatic cylinders.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.87 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Packing Specifically for IDI Rod Sealing

  NOK

  • A large cross-section design that can be used over a wide pressure range
  • Uses U801 iron rubber in the materials for excellent abrasion resistance and also sealing capability

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.73 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  ST Seals for Low-Friction, Low Hydraulic Pressure, STS Type

  SAKAGAMI SEISAKUSHO

  Seal combining an S-FLON (PTFE) seal ring and a synthetic rubber O-ring. Low friction — does not cause static slip even at low pressure and low speed.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.56 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  [Air Pressure Use] PPD Packing

  SAKAGAMI SEISAKUSHO

  Packing designed with a focus on eccentric tracking properties and, balancing durability and friction. For dual pressure-type pistons; groove compatible with PSD packings.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.67 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Soft Wiper (BIHO / BIHI)

  SAKAGAMI SEISAKUSHO

  It can also prevent dust from entering from the outside to protect the packing or bearing. Features fiber composite duct seal and is optimal for prevention of infiltration by fiber-like dust and fine powder dust.

  Select to compare

  Configure now
  Starting from∗ ：	2.58 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  [Oil Pressure Use] WRB E-Sleeve

  SAKAGAMI SEISAKUSHO

  A multi-use piston bearing with back-up ring, for use with packings groove compatible with SKY packing. Can be mounted to an integrated groove.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	11.42 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  ODI, Piston Seal Dedicated Packing

  NOK

  ▪ A large cross-section design that can be used over a wide pressure range.
  ▪Made from Iron Rubber (NOK product name of polyurethane elastomer) U801, providing excellent abrasion resistance and sealing performance.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.62 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  GPY Packing for Pneumatic Pressure

  SAKAGAMI SEISAKUSHO

  A dedicated packing for pistons that uses an abrasion-resistant material. The sectional dimensions for the diameter sizes are larger than the SKY packing. Highly durable to prevent causing counterpressure damage.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	9.54 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  [Hydraulic Use] RGU Packing

  SAKAGAMI SEISAKUSHO

  Sealing performance equivalent to U packing is provided thanks to a unique two-pressure one-ring shape with a seal lip, and the piston component is compact.
  
  [Features]
  · Depending on the position of the equipped groove, there may be cases where equipping to an integral groove is not possible.
  · Please use a split groove structure these cases.
  · ⌀DH9/f8 changes based on the bearing system.
  · When using this product with a wear ring, please refer to the wear ring dimensions table.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.15 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  [Oil Pressure Use] NMY Packing

  SAKAGAMI SEISAKUSHO

  U packing exclusively for use with rods that have a small cross-sectional design; compatible with JIS B 2401 P O-rings. Produces sealing that is superior to O-rings and has excellent friction characteristics.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.17 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  [Oil Pressure Use] RGY Packing

  SAKAGAMI SEISAKUSHO

  Packing for SKY packing-compatible pistons. Abrasion-resistant materials. Shape designed to help prevent counterpressure damage.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.95 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  [Oil Pressure Use] RNY Packing

  SAKAGAMI SEISAKUSHO

  Packing dedicated to piston compatible with the SKY packing. Uses abrasion-resistant materials. Shape is designed to help prevent counterpressure damage.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.95 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  [Oil Pressure Use] (T) SGY Packing

  SAKAGAMI SEISAKUSHO

  Dedicated packing for use with pistons which is compatible with SKY packing and grooves. Usable at temperatures of -45 to 100°C, which effectively eliminates the need for gasket replacement even in cold places in Japan and abroad.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	10.32 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  [Oil Pressure Use] (Y) SNY Packing

  SAKAGAMI SEISAKUSHO

  Dedicated packing for use with rods which is compatible with SKY packing and grooves. Usable at temperatures of -45 to 100°C, which effectively eliminates the need for gasket replacement even in cold places in Japan and abroad.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	8.42 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  SMJ Seals for Hydraulic Pressure

  SAKAGAMI SEISAKUSHO

  Seal for rods combining an S-FLON (PTFE) seal ring and a synthetic rubber O-ring. Superior sealability, high-speed and low-speed performance (static-slip performance).

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.00 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  STK Seals for Reciprocating Motion, Hydraulic Pressure, STG Type

  SAKAGAMI SEISAKUSHO

  Seal combining an S-FLON (PTFE) seal ring and a synthetic rubber O-ring. Low friction — does not cause static slip even at low pressure and low speed.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	37.24 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  [Air Pressure Use] PNY Packing

  SAKAGAMI SEISAKUSHO

  Wear-resistant packing exclusively designed for rods. It maintains stable adhesion performance under conditions ranging from oil-lubricated, oil free, to dry air.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.54 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  [Air Pressure Use] MYP Packing / MYR Packing

  SAKAGAMI SEISAKUSHO

  As with mini Y packing, the groove is compatible with the O-rings of the JIS B2401-P series. The excellent friction properties provide stable sealing characteristics.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.55 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  [Air Pressure Use] PPY Packing

  SAKAGAMI SEISAKUSHO

  Piston-dedicated packing for small-diameter cylinders, prioritizing abrasion resistance.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.48 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  [for Low Hydraulic Pressure, Air, Hydro] OSY Packing

  SAKAGAMI SEISAKUSHO

  Piston-dedicated packing for low hydraulic pressure and air hydro cylinders. Suppresses stick-slip behavior and operates smoothly, even at low pressure and low speed.

  Select to compare

  Configure now
  Starting from∗ ：	8.59 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

• 

  SWB Wear Rings for Light Loads

  SAKAGAMI SEISAKUSHO

  A piston bearing made of fabric-reinforced phenolic resin. Demonstrates excellent load tolerance. installs into single grooves to prevent seizing and galling of pistons. This product is mainly for use with pneumatic cylinders.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.04 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  [Oil Pressure Use] PWL Bearing

  SAKAGAMI SEISAKUSHO

  By using this product in combination with RGU packing, it can be integrally attached to a groove with an embedded type plastic combined backup ring / bearing.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	13.07 €
  Min. Shipping Days ：	11 Days

  *Unit price with basic configuration

Loading...