- inCAD Library Home
- > No.000266 Glass Circuit Board Conveyor
No.000266 Glass Circuit Board Conveyor
54
54
Motor driven conveying system using a system of rollers, pulleys, and belts.
Related Category
O-Rings
| Product name | O-Rings/P Series |
|---|---|
| Part number | NPA32 |
* Orange colored cells in the table below indicate the part numbers used in this example.
Selection criteria
To transport a workpiece without damaging it
Available sizes
■O-Rings - P Series
| Material | Hardness (JIS Hs) | Color | Operable Temperature Range | JIS Symbol | Usage |
|---|---|---|---|---|---|
| Nitrile Rubber | 70±5 | Black | -30-100°C | Class 1 A | Mineral Oil Resistant |
| 90±5 | Black | -25-100°C | Class 1 B | ||
| Silicon Rubber | 50±5 | Milky White | -50-200°C | - | Heat Resistant |
| 70±5 | Navy | -50-200°C | Class 4 C | ||
| Fluororubber | 70±5 | Black | -15-200°C | Class 4 D | |
| 90±5 | Black | -15-200°C | - | ||
| Ethylene Propylene Rubber | 70±5 | Black | -45-130°C | - | Weather Resistant |
■Sizes and Dimensions (excerpt)
| JIS Nominal Number | Ring I.D. | Ring Wire Dia. | Mating Side Dia. Against O-ring | |
|---|---|---|---|---|
| Internal Contact | External Contact | |||
| P22 | Ø21.8 | Ø2.4 | Ø22 | Ø26 |
| P22A | Ø21.7 | Ø3.5 | Ø22 | Ø28 |
| P22.4 | Ø22.1 | Ø22.4 | Ø28.4 | |
| P24 | Ø23.7 | Ø24 | Ø30 | |
| P25 | Ø24.7 | Ø25 | Ø31 | |
| P25.5 | Ø25.2 | Ø25.5 | Ø31.5 | |
| P26 | Ø25.7 | Ø26 | Ø32 | |
| P28 | Ø27.7 | Ø28 | Ø34 | |
| P29 | Ø28.7 | Ø29 | Ø35 | |
| P29.5 | Ø29.2 | Ø29.5 | Ø35.5 | |
| P30 | Ø29.7 | Ø30 | Ø36 | |
| P31 | Ø30.7 | Ø31 | Ø37 | |
| P31.5 | Ø31.2 | Ø31.5 | Ø37.5 | |
| P32 | Ø31.7 | Ø32 | Ø38 | |
| P34 | Ø33.7 | Ø34 | Ø40 | |
| P35 | Ø34.7 | Ø35 | Ø41 | |
| P35.5 | Ø35.2 | Ø35.5 | Ø41.5 | |
| P36 | Ø35.7 | Ø36 | Ø42 | |
| P38 | Ø37.7 | Ø38 | Ø44 | |
| P39 | Ø38.7 | Ø39 | Ø45 | |
| P40 | Ø39.7 | Ø40 | Ø46 | |
| P41 | Ø40.7 | Ø41 | Ø47 | |
| P42 | Ø41.7 | Ø42 | Ø48 | |
| P44 | Ø43.7 | Ø44 | Ø50 | |
| P45 | Ø44.7 | Ø45 | Ø51 | |
| P46 | Ø45.7 | Ø46 | Ø52 | |
| P48 | Ø47.7 | Ø48 | Ø54 | |
| P50 | Ø49.7 | Ø50 | Ø56 | |
* Please see the product pages for other diameter rings.
Accuracy Info
Ring Wire DIA. Tolerance:
| Wire Dia. | Tolerance |
|---|---|
| Ø1.9 | ±0.08 |
| Ø2.4 | ±0.09 |
| Ø3.5 | ±0.10 |
| Ø5.7 | ±0.13 |
Parting Surface Burr Height: 0.1 or less
Parting Surface Burr Width: 0.15 or less
Ring I.D. Tolerance;
| JIS Nominal Number | Ring I.D. | Tolerance | ||
|---|---|---|---|---|
| Nitrile | Silicone Ethylene | Fluorine | ||
| P22 | Ø21.8 | ±0.24 | ±0.36 | ±0.28 |
| P22A | Ø21.7 | |||
| P22.4 | Ø22.1 | |||
| P24 | Ø23.7 | |||
| P25 | Ø24.7 | ±0.25 | ±0.37 | ±0.30 |
| P25.5 | Ø25.2 | |||
| P26 | Ø25.7 | ±0.26 | ±0.39 | ±0.31 |
| P28 | Ø27.7 | ±0.28 | ±0.42 | ±0.33 |
| P29 | Ø28.7 | ±0.29 | ±0.43 | ±0.34 |
| P29.5 | Ø29.2 | |||
| P30 | Ø29.7 | |||
| P31 | Ø30.7 | ±0.30 | ±0.45 | ±0.36 |
| P31.5 | Ø31.2 | ±0.31 | ±0.46 | ±0.37 |
| P32 | Ø31.7 | |||
| P34 | Ø33.7 | ±0.33 | ±0.49 | ±0.39 |
| P35 | Ø34.7 | ±0.34 | ±0.51 | ±0.40 |
| P35.5 | Ø35.2 | |||
| P36 | Ø35.7 | |||
| P38 | Ø37.7 | ±0.37 | ±0.55 | ±0.44 |
| P39 | Ø38.7 | |||
| P40 | Ø39.7 | |||
| P41 | Ø40.7 | ±0.38 | ±0.57 | ±0.45 |
| P42 | Ø41.7 | ±0.39 | ±0.58 | ±0.48 |
| P44 | Ø43.7 | ±0.41 | ±0.61 | ±0.49 |
| P45 | Ø44.7 | |||
| P46 | Ø45.7 | ±0.42 | ±0.63 | ±0.50 |
| P48 | Ø47.7 | ±0.44 | ±0.66 | ±0.52 |
| P50 | Ø49.7 | ±0.45 | ±0.67 | ±0.54 |
Idler Pulleys
| Product name | Idler Pulleys/Resin/Flat/Flanged |
|---|---|
| Part number | TPBSN38-15 |
| Features | Can be used as the tension adjuster for timing belts. |
* Orange colored cells in the table below indicate the part numbers used in this example.
Selection criteria
Used for tension adjustment of a timing belt
Available sizes
■Idler Pulleys - Resin, Flat / Flanged
| Body Material | Bearing Material |
|---|---|
| Glass Reinforced Nylon (engineered plastic) | Steel |
■Sizes
| Nominal Dia. of the Idler | Overall Width | Inner Width | O.D. | Bearing No. to Use | Applicable Idler Shaft | |
|---|---|---|---|---|---|---|
| Flanged | No Flange | Flanged | ||||
| Ø38 | 18 | 18 | 15 | Ø42 | 6200ZZ | WS010S |
| Ø40 | 26 | 26 | 20 | Ø48 | 6201ZZ | WS116S ･ WS122S |
| Ø45 | 25 | 25 | Ø50 | 6202ZZ | WS216S | |
| Ø46 | Ø52 | 6201ZZ | WS112S ･ WS116S | |||
| Ø50 | 31 | 31 | 25 | Ø62 | WS116S ･ WS122S | |
| Ø60 | 36 | - | 30 | Ø66 | ||
| Ø70 | 35 | - | 28 | Ø80 | 6202ZZ | WS216S ･ WS222S |
-
TERMS AND CONDITIONS FOR USE OF CAD DATA-
Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
- 1. CAD Data
- The Data is prepared for assisting the Company's users in the CAD design process by providing dimensions and other Product information. In order to provide the best speed and stability working within this site, the Product drawings were simplified to reduce the size of the Data. For instance, some of the Products are shown without the oil groove shape, screws or spring shape. Also, please be aware that the tolerance, surface roughness and/or chamfer of the Data may vary from the actual Products.
- 2. Disclaimer on Data
- While the Company has carefully prepared the Data, accuracy of the Data is not guaranteed and is subject to the variances as described above. The Company may also modify, add or delete the Data at any time without prior notice. The Company assumes no liability for any direct, indirect, consequential or special damages that you may claim resulted from your use of the Data or any changes to or deletions of the Data regardless of the reason. The Company provides no warranty as to the quality, accuracy, functionality, safety or reliability of the combination of Products and parts. Example applications and combinations of the Products are provided for illustrative purposes only.
- 3. Copyright
-
Copyrights to the content and the Data belong to the Company or the manufacturers of the Products. The said copyright is protected by the Copyright Act and international treaties. The use (including duplication, modification, uploading, posting, transmission, distribution, licensing, sales and publishing) of the Data except for the purpose to use the Data described above without prior approval of the Company is not allowed. The Data cannot be used for any purposes (including sales promotion) except for designing your machine. If you violate this provision or the laws or regulations, the Company may prohibit you from the use of the Data, the Company’s site and/or take legal action. So long as you comply with these terms and conditions, the Company grants to you a non-exclusive, non-transferable, revocable license to access and use the Data for the sole purpose of assisting you in designing machines that incorporate products.
- 4. Disclaimer of Warranty
- ANY AND ALL CONTENT APPEARING ON THIS WEB SITE IS PROVIDED FOR INFORMATIONAL PURPOSES ONLY. THIS WEB SITE, ITS CONTENT AND ITS LINKS ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND ARE USED ONLY AT YOUR SOLE RISK, TO THE FULLEST EXTENT PERMISSIBLE BY LAW. THE COMPANY DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, OF ANY KIND, REGARDING THIS WEB SITE (INCLUDING ITS CONTENT, HARDWARE, SOFTWARE AND LINKS), INCLUDING AS TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, TITLE, NON INFRINGEMENT, RESULTS, ACCURACY, COMPLETENESS, ACCESSIBILITY, COMPATIBILITY, SECURITY AND FREEDOM FROM COMPUTER VIRUS. THE COMPANY WILL NOT BE LIABLE FOR ANY DAMAGES OR LOSSES, INCLUDING DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, INCIDENTAL OR PUNITIVE DAMAGES AND/OR LOST PROFITS, IN CONNECTION WITH USE OF THE INTERNET, THIS WEB SITE, ITS CONTENT OR ITS LINKS
Further, the Company will not be liable to you for any failure or delay by the Company to provide access to the Data or any of its obligations under these terms and conditions where such failure or delay is the direct or indirect result of any circumstances beyond the Company's reasonable control (and the Company's obligations will be suspended for the duration of such circumstances). - 5. Policy of Third Parties
- You may be required to separately agree to third party's policies if you use third party software to create or browse the Data or use a third party’s CAD data. In this case, the Company does not assume any responsibility for defects of such CAD data or the software of the third party or violation of their rights. Understand them before use.
CAD Data Download (Unit Assembly)
CAD Data Download: File Format
Cautions on the CAD data
-
Assembly data shows the assembly drawings in the concept design phase. The sole purpose of the data is to explain the structure and functionality of the assembly and is not considered nor to be used as a final design.
You will need to edit the Data so that it meets your specific design conditions. -
The CAD data unit assembly consists of sub-assemblies.
Each sub-assembly unit can be used as it is or can be edited. - The Data for fabricated parts is based on easy-to-edit dimensions and shapes in sketches and histories.
- The Data including the third-part components are made by the Company.
* The part in the frame is a sub-assembly unit.
-
Your access to the CAD data that MISUMI Corporation (hereinafter referred to as the Company) posts on this site (including 3D CAD data, intermediate 3D CAD data and 2D CAD data; hereinafter referred to as the Data) are of products manufactured and/or sold by the Company (hereinafter referred to as the Products) assumes that you have read and accepted these terms and conditions which govern your use of the Data. If you do not agree to these terms and conditions, you must stop using this website and the Data. You must not use the Data for any unlawful purpose or in any manner inconsistent with these terms and conditions.
-
- * Unit assembly CAD data consists of some sub-assemblies.
Each sub-assembly unit can be used as it is or can be edited.
Application Overview
Purpose
- Purpose: transferring glass circuit boards.
Operation: Rollers are each attached with an O-ring for proper contact with the sides and edges of the glass circuit boards.
Target workpiece
- Shape: glass circuit board
- Size: t0.5 x W300 x D500mm
Design Specifications
Operating Conditions or Design Requirements
- Outer dimensions: W1200 x D714 x H280mm
- Transfer speed: 100mm/s
Required Performance
- Load: workpiece + belt = 50N
- Widthwise positioning accuracy: ±1mm
Selection Criteria for Main Components
- A motor that can transfer a load of 50N at a speed of over 70mm/s is selected.
Design Evaluation
Verification of main components
- The torque of the motor and reducer is verified based on the load torque.
- Conditional value: pulley diameter D = 0.039m, friction coefficient μ = 0.3, efficiency η = 0.9, gear head efficiency ηG = 0.5, gear ratio G = 81, motor torque TM = 0.32N･m, motor rated rotation speed N = 3000rpm, load M = 50N
- Load torque: T = F x D/2 x η = μ x M x D/2 x η = 0.3 x 50 x 0.039/2 x 0.9 = 0.33N･m
- Torque of motor and reducer: TG = TM x G x ηG = 0.32 x 81 x 0.5 = 13N･m
> 0.33N･m = T
-> There is no problem. - Transfer speed: V = N x D x π/G x 60 = 3000 x 39 x π/81 x 60 = 75.6mm/s
Other Design Consideration
- The conveying system is driven by a single motor.
- An adhesive rubber roller is installed for dust removal.
Explore Similar Application Examples
Page
-
/
-
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.