EN / UK

Type Code Seach | *NOT READY*: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Screw-Hole-Related Tools（Coating Y/N：Available）

Search by sub-category

164

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

1
2
3
4
Next >>

A Tap Series, Spiral Tap, A-SFT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Mainly spiral taps with spiral shaped grooves used in the blind holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.04 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Hand Tap Series, V Coating Powder High Speed (High Hardness Steel), V-XPM-HT

OSG

Suitable for 42-52 HRC tempered steel (alloy steel, die steel, tool steel, etc.) tapping. Excellent Abrasion Resistant V Coating Has Been Applied to Maximize the Properties of the Base Material on the Surface

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	31.35 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

MTI Mini Mill Thread, w / o Finishing Teeth, for Both 60° Inner / Outer Diameters

CARMEX

For both internal and external threading

[Features]
· Ultrafine particle carbide and new type three-layer PVD coating

Select to compare

Configure now
Starting from^∗ ：	208.52 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Hand Tap Series, Hand Taps for Super High Hardness Steel, VX-OT

OSG

Suitable for 50 HRC and up Tempered Steel (Alloy Steel, Die Steel, Tool Steel, Etc.) Tapping

Select to compare

Configure now
Starting from^∗ ：	83.15 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap for Blind Hole 1013

GUHRING

[Features]
· JIS standard compliant tap for blind holes.
· Supports a wide range of work materials from general steel to stainless steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	24.56 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Mill Thread G (55°) Solid Carbide with Oil Hole

CARMEX

Whitworth screw, I.D./O.D. common type.

[Features]
· Threading is done in 1 pass.
· Spiral grooves allow reduction of cutting torque and smoother processing.
· Machining time can be shortened with this multi-blade type, with flute count from 3 to 6.
· Starting with blade diameter of 2.2 mm, various small diameters are available.
· Can be used to cut the effective thread up to the edge of blind holes.
· The same tool can be used to machine workpieces of different materials.
· The finish is very clean.
· The unique multilayer coating extends the life of the tool.
· Cutting pressure is reduced, enabling machining of thin workpieces.
· The same tool can be used for left and right threading.

Select to compare

Configure now
Starting from^∗ ：	273.20 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

A Tap Series Point Tap Long Shank A-LT-POT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

Select to compare

Configure now
Starting from^∗ ：	23.65 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

MISUMI

Threading cutters that enable the high-speed stable processing are available at special prices

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	110.87 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model

MISUMI

[Features]
-Carbide thread cutter for stable high speed machining
-Can be used for both blind holes and through holes
-DLC coating with excellent abrasion resistance and chip weld resistance makes it ideal for non-steel metals such as aluminium and copper.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	113.79 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads

MISUMI

The left-flute left-rotary cutting that's achieved by the original geometry and coating allow the milling threading of high hardness steel of up to HRC62.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	168.02 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC

OSG

The planet cutter is able to mill M1 - M5 small diameter female screws. Ideal for Preventing Defects in High Value Added Manufactured Articles and for Tapping without a Pilot Hole Margin

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	101.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, HR Coating, for NI-Base Heat Resistant Alloys, WHR-NI-POT

OSG

In applying HR coating with high welding-resisting properties on nickel based alloys, it achieves a long operating life even on aging nickel based alloys (40-45 HRC)

Select to compare

Configure now
Starting from^∗ ：	28.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, Ultra Synchronizing Taps, HS-RFT

OSG

Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	30.20 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Groove-Free Tap Series, Tin Coated, TIN-NRT

OSG

Suitable for both steel and non-ferrous alloys. Capable of high-speed cutting and efficient tapping; offer drastically improved durability.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	17.52 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Groove-Free Tap Series VP New Roll VP-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Volume Discount

Select to compare

Configure now
Min. Shipping Days ：	6 Days

Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT

OSG

Powdered high-speed steel and special thread design provide long-life processing in wide range of workpieces.

Select to compare

Configure now
Starting from^∗ ：	24.43 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap for Through Holes 1015

GUHRING

[Features]
· JIS standard compliant tap for through holes.
· Supports a wide range of work materials from general steel to stainless steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	23.73 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

HF Series Ultra-High Speed Spiral Tap for Cast Aluminum / Die Cast Aluminum HFAHS

YAMAWA MFG

Uses a center through hole shape that supports internally lubricating machines, and can perform ultra high speed machining. It is suitable for blind hole such as cast aluminum, and it is for the vertical direction processing.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	36.15 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Ultra-High Speed Carbide Tap for Cast Iron for Blind Holes HFICT-B

YAMAWA MFG

Uses a carbide tap with a center through hole shape that supports low temperature cool dry machining, and internally lubricating and mist systems through ultra high speed carbide tapping. It is suitable for blind hole of cast iron.

Select to compare

Configure now
Starting from^∗ ：	152.35 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

Taper Tap Series for Pipes TIN Coated Long Shank TIN-LT-TPT

OSG

Select to compare

Configure now
Starting from^∗ ：	47.40 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

MTI Mini Mill Thread, w / o Finishing Teeth, for Both 55° Inner / Outer Diameters

CARMEX

For both internal and external threading

[Features]
· Ultra-fine particle carbide with an advanced three layer PVD blue coating

Select to compare

Configure now
Starting from^∗ ：	208.52 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

MTI Mini Mill Thread ISO, for Meter Screws and Inner-Diameter Screws

CARMEX

Metric thread / for I.D. thread

[Features]
· Ultra-fine particle carbide with an advanced three layer PVD blue coating

Select to compare

Configure now
Starting from^∗ ：	212.85 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads

MISUMI

[Features]
-Thread cutting with small diameters from M1.4 × 0.3 (pilot hole diameter ø1.1 mm) is possible
-Reduced cutting load due to short flute length (3 webs)
-Enables effective thread cutting right into the corners of blind holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	130.95 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

TS Coated Carbide Threading Cutter, for Internal Metric Threads

MISUMI

[Features]
--Tungsten carbide thread cutter for stable high speed machining
-Can be used for both blind holes and through holes
-
-It is coated with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating characteristics.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	181.83 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TiN Coated High-Speed Steel Roll Tap

TiN Coated High-Speed Steel Roll Tap【5 Pieces Per Package】

MISUMI

[Features]
-Used for tapping that produces no chips
-Suitable for a wide range of materials, from general steel to non-ferrous alloys
-Excellent abrasion resistance and chip weld resistance due to TiN coating.

Select to compare

Configure now
Starting from^∗ ：	55.33 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TiN Coated High-Speed Steel Spiral Tap

TiN Coated High-Speed Steel Spiral Tap【1-5 Pieces Per Package】

MISUMI

The high-precision toothed 1.5P type for blind hole drilling and long shank type that's ideal in the deep threading of workpieces are also available

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	14.59 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

TiN Coated High-Speed Steel Point Tap

TiN Coated High-Speed Steel Point Tap【1-5 Pieces Per Package】

MISUMI

[Features]
-Can be used for through hole machining
-Suitable for a wide range of materials, but is particularly effective for tapping steel alloys and stainless steel etc.
-Excellent abrasion resistance and resistance to chip welding due to TiN coating
-Long shank, ideal for drilling deep tapped holes (G-LS-POT).

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	13.81 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Excel Hand Tap EHT

NACHI(FUJIKOSHI)

Suitable for mass tapping of aluminum/cast iron.

Select to compare

Configure now
Starting from^∗ ：	129.51 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

G Spiral Tap for Deep Holes in Stainless Steel GSPS

NACHI(FUJIKOSHI)

Suited for stainless steel and materials that produce a lot of swarf.

Select to compare

Configure now
Starting from^∗ ：	26.98 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, HR Coated, for Heat-Resistant Nickel-Based Superalloys, WHR-NI-SFT

OSG

Combining spiral tap with knurled flutes has brought in highly rigid edges. Assure long-lasting, stable machining of nickel-based alloy (40 - 45 HRC) processed under aging treatment.

Select to compare

Configure now
Starting from^∗ ：	22.41 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, for Stainless Steel (Compatible with Water-Soluble Cutting Oil) CC-SUS-SFT

OSG

Allows internal threading of stainless steel with a water soluble cutting fluid.
Tool material: Vanadium high speed steel
Hole type: For blind holes
Material: General steel/stainless steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	17.56 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Hand Tap Series, Hand Taps for Super High Hardness Steel, WH55-OT

OSG

Suitable for threading hardened steel up to 55 HRC.
Material: High hardness steel up to 55 HRC
For coating / surface treatment / steel
Accuracy (class) OH3

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	83.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Insert Screw Tap Series, New Roll Tap for Non-Irons, Long Shank, HL-LT-B-NRT

OSG

When cutting aluminum (cast, rolled and forged) and other light alloys, this is suitable as a countermeasure for obstruction from metal shavings, or when the objective is extending the tap usage life.

Select to compare

Configure now
Starting from^∗ ：	42.36 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, Tin Coated, TIN-SFT

OSG

The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	16.04 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, Tin Coated, Long Shank, TIN-LT-SFT

OSG

The length of the main screw is processed under 2D, making it ideal for tapping bases and insides of carbon steel and stainless steel using water-soluble cutting fluid.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	23.77 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, V Coating Powder High-Speed Steel, VP-SFT

OSG

Optimal for machining pre-hardened steel alloys from 35 to 42 HRC.
Tool material: Powder metal high-speed steel
Thread type: Metric
Hole type: For blind holes
Material: General steel / heat-treated steel
Coating: Surface treatment for steel.

Select to compare

Configure now
Starting from^∗ ：	17.33 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, V Coated, V-SFT

OSG

Can be used on a wide variety of materials soft materials to hard materials. Particularly suited for tapping under high speed, high dilution (water soluble cutting fluid) conditions.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	17.33 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Spiral Tap Series, High-Speed Synchronized Tap Long Shank HS-LT-SFT

OSG

Suited for blind thread cutting using machinery equipped with complete lead feeding mechanisms.

Select to compare

Configure now
Starting from^∗ ：	32.98 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Spiral Tap Series, for Copper, CU-SFT

OSG

Treated With CRN Coating Which Shows Excellent Friction Resistance and Anti-Sticking Properties Against Copper and Use of HSSE as Material Allows Long Lived Machining on Copper

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	26.27 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Hand Tap Series, for Resin, EX-PLA-HT

OSG

Primarily suited for heat hardened resins such as phenol (Bakelite), epoxy, urea, melamine.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	10.52 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Planet Cutter Series MC-Planet Cutters PNGT

OSG

Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.

Select to compare

Configure now
Starting from^∗ ：	205.83 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Planet Cutter Series NC-Planet Cutters WX-PNC

OSG

Different threads can be processed with the same pitch using a single piece. Both right-handed and left-handed threads can be processed.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	158.30 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Planet Cutter Series Super Planet DR-PNAC

OSG

A Single Piece Can be Used as a Complex Tool, for Pilot Hole Drilling + Chamfering + Female Thread Processing, Reducing Unnecessary Non-Processing Time in Tool Changes and Improving Productivity

Select to compare

Configure now
Starting from^∗ ：	295.75 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Planet Cutter Series Super Planet with Oil Holes DR-O-PNAC

OSG

A Single Piece Can be Used as a Complex Tool, for Pilot Hole Drilling + Chamfering + Female Thread Processing, Reducing Unnecessary Non-Processing Time in Tool Changes and Improving Productivity

Select to compare

Configure now
Starting from^∗ ：	324.46 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Planet Cutter Series Planet Cutters with Oil Holes for Steel WXO-ST-PNC

OSG

By spraying machining oil compound from the lubrication hole, allows effective removal of cutting debris.

Select to compare

Configure now
Starting from^∗ ：	165.90 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	OSG	OSG	CARMEX	OSG	GUHRING	CARMEX	OSG	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	OSG	OSG	OSG	GUHRING	YAMAWA MFG	YAMAWA MFG	OSG	CARMEX	CARMEX	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG
Product Series	A Tap Series, Spiral Tap, A-SFT	Hand Tap Series, V Coating Powder High Speed (High Hardness Steel), V-XPM-HT	MTI Mini Mill Thread, w / o Finishing Teeth, for Both 60° Inner / Outer Diameters	Hand Tap Series, Hand Taps for Super High Hardness Steel, VX-OT	Spiral Tap for Blind Hole 1013	Mill Thread G (55°) Solid Carbide with Oil Hole	A Tap Series Point Tap Long Shank A-LT-POT	TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads	DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model	TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads	Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC	Point Tap Series, HR Coating, for NI-Base Heat Resistant Alloys, WHR-NI-POT	Point Tap Series, Ultra Synchronizing Taps, HS-RFT	Groove-Free Tap Series, Tin Coated, TIN-NRT	Groove-Free Tap Series VP New Roll VP-NRT	Groove-Free Tap Series VP New Roll Long Shank VP-LT-NRT	Point Tap for Through Holes 1015	HF Series Ultra-High Speed Spiral Tap for Cast Aluminum / Die Cast Aluminum HFAHS	Ultra-High Speed Carbide Tap for Cast Iron for Blind Holes HFICT-B	Taper Tap Series for Pipes TIN Coated Long Shank TIN-LT-TPT	MTI Mini Mill Thread, w / o Finishing Teeth, for Both 55° Inner / Outer Diameters	MTI Mini Mill Thread ISO, for Meter Screws and Inner-Diameter Screws	TiAlN Coated Carbide Threading Cutter, for Internal Metric Threads	TS Coated Carbide Threading Cutter, for Internal Metric Threads	TiN Coated High-Speed Steel Roll Tap【5 Pieces Per Package】	TiN Coated High-Speed Steel Spiral Tap【1-5 Pieces Per Package】	TiN Coated High-Speed Steel Point Tap【1-5 Pieces Per Package】	Excel Hand Tap EHT	G Spiral Tap for Deep Holes in Stainless Steel GSPS	Spiral Tap Series, HR Coated, for Heat-Resistant Nickel-Based Superalloys, WHR-NI-SFT	Spiral Tap Series, for Stainless Steel (Compatible with Water-Soluble Cutting Oil) CC-SUS-SFT	Hand Tap Series, Hand Taps for Super High Hardness Steel, WH55-OT	Insert Screw Tap Series, New Roll Tap for Non-Irons, Long Shank, HL-LT-B-NRT	Spiral Tap Series, Tin Coated, TIN-SFT	Spiral Tap Series, Tin Coated, Long Shank, TIN-LT-SFT	Spiral Tap Series, V Coating Powder High-Speed Steel, VP-SFT	Spiral Tap Series, V Coated, V-SFT	Spiral Tap Series, High-Speed Synchronized Tap Long Shank HS-LT-SFT	Spiral Tap Series, for Copper, CU-SFT	Hand Tap Series, for Resin, EX-PLA-HT	Planet Cutter Series MC-Planet Cutters PNGT	Planet Cutter Series NC-Planet Cutters WX-PNC	Planet Cutter Series Super Planet DR-PNAC	Planet Cutter Series Super Planet with Oil Holes DR-O-PNAC	Planet Cutter Series Planet Cutters with Oil Holes for Steel WXO-ST-PNC
Starting from^∗	16.04 € *Unit price with basic configuration Volume Discount	31.35 € *Unit price with basic configuration Volume Discount	208.52 € *Unit price with basic configuration	83.15 € *Unit price with basic configuration	24.56 € *Unit price with basic configuration Volume Discount	273.20 € *Unit price with basic configuration	23.65 € *Unit price with basic configuration	110.87 € *Unit price with basic configuration Volume Discount	113.79 € *Unit price with basic configuration Volume Discount	168.02 € *Unit price with basic configuration Volume Discount	101.50 € *Unit price with basic configuration Volume Discount	28.34 € *Unit price with basic configuration	30.20 € *Unit price with basic configuration Volume Discount	17.52 € *Unit price with basic configuration Volume Discount	- Volume Discount	24.43 € *Unit price with basic configuration	23.73 € *Unit price with basic configuration Volume Discount	36.15 € *Unit price with basic configuration Volume Discount	152.35 € *Unit price with basic configuration	47.40 € *Unit price with basic configuration	208.52 € *Unit price with basic configuration	212.85 € *Unit price with basic configuration	130.95 € *Unit price with basic configuration Volume Discount	181.83 € *Unit price with basic configuration Volume Discount	55.33 € *Unit price with basic configuration	14.59 € *Unit price with basic configuration Volume Discount	13.81 € *Unit price with basic configuration Volume Discount	129.51 € *Unit price with basic configuration	26.98 € *Unit price with basic configuration	22.41 € *Unit price with basic configuration	17.56 € *Unit price with basic configuration Volume Discount	83.34 € *Unit price with basic configuration Volume Discount	42.36 € *Unit price with basic configuration	16.04 € *Unit price with basic configuration Volume Discount	23.77 € *Unit price with basic configuration Volume Discount	17.33 € *Unit price with basic configuration	17.33 € *Unit price with basic configuration Volume Discount	32.98 € *Unit price with basic configuration	26.27 € *Unit price with basic configuration	10.52 € *Unit price with basic configuration	205.83 € *Unit price with basic configuration	158.30 € *Unit price with basic configuration Volume Discount	295.75 € *Unit price with basic configuration	324.46 € *Unit price with basic configuration	165.90 € *Unit price with basic configuration
Min. Shipping Days	Same day	Same day	5 Days	6 Days	6 Days	5 Days	6 Days	5 Days	5 Days	7 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	7 Days	7 Days	Same day	5 Days	5 Days	7 Days	5 Days	5 Days	5 Days	5 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	6 Days
Screw Types	Meter / Unified	Meter	Meter	Meter	Meter	Parallel for Pipes	Meter	Meter	Meter	Meter	Meter / Unified	Meter	Meter	Meter / Unified	Meter / Unified	Meter / Unified	Meter	Meter	Meter	Taper for Pipe	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter / Taper for Pipe / Parallel for Pipes	Meter / Unified / Taper for Pipe	Meter	Meter	Meter
Screw size (Nominal)	1-8UNC ～ M56	M4 ～ M5	-	M2 ～ M20	M2 ～ M20	-	M2 ～ M24	M3 ～ M20	M3 ～ M16	M2 ～ M12	-	M8	M3 ～ M14	No0UN ～ M20	M1 ～ M12	M1 ～ M12	M2 ～ M20	M6 ～ M20	M6 ～ M12	Rc1/2 ～ Rc3/8	-	M1 ～ M3	M1.4 ～ M20	M3 ～ M12	M3 ～ M10	M3 ～ M10	M3 ～ M10	M3 ～ M12	M8 ～ M16	M4 ～ M8	M2 ～ M24	M3 ～ M12	M8	M1.4 ～ M16	M3 ～ M16	M3 ～ M12	M2 ～ M16	M3 ～ M10	M10	M3	-	-	M6 ～ M12	M6 ～ M12	-
Pitch (P), Number of Threading(mm)	0.25 ～ 5.5	0.7 ～ 0.8	-	0.4 ～ 2.5	0.4 ～ 2.5	-	0.25 ～ 3	0.5 ～ 2.5	0.5 ～ 2	0.4 ～ 1.75	0.25 ～ 32	1.25	0.5 ～ 2	0.25 ～ 80	0.25 ～ 56	0.25 ～ 56	0.4 ～ 2.5	1 ～ 1.75	1 ～ 1.75	14 ～ 28	-	0.25 ～ 0.5	0.3 ～ 2.5	0.5 ～ 1.75	0.5 ～ 1.5	0.5 ～ 1.5	0.5 ～ 1.5	0.5 ～ 1.75	1.25 ～ 2	0.7 ～ 1.25	0.4 ～ 3	0.5 ～ 1.75	1.25	0.3 ～ 2	0.5 ～ 2	0.5 ～ 1.75	0.4 ～ 2	0.5 ～ 1.5	1.5	0.5	1 ～ 19	1 ～ 28	1 ～ 1.75	1 ～ 1.75	0.5 ～ 3
Chamfer threads (Lcf)	1.5P ～ 2.5P	5P	-	3P	-	-	5P	-	-	-	-	5P	6P	2P ～ 4P	2P ～ 4P	2P ～ 4P	-	2.5P	2.5P	2.5P	-	-	-	-	2 P ～ 4 P	1.5 P ～ 2.5 P	5 P	1.5P ～ 3P	2.5P	2.5P	2.5P	2.5P ～ 5P	2P	2.5P	2.5P	2.5P	2.5P	3P	2.5P	3P	-	-	-	-	-
Tool Material Type	Powder high-speed steel / Vanadium High-Speed Steel	Powder high-speed steel	Carbide	Carbide	High-speed steel	Carbide	Powder high-speed steel	Carbide	Carbide	Carbide	Carbide	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel	Powder high-speed steel	High-speed steel	Cobalt HSS	Carbide	Vanadium High-Speed Steel	Carbide	Carbide	Carbide	Carbide	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	Alloy HSS	Powder high-speed steel	Vanadium High-Speed Steel	Carbide	High-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Cobalt HSS	Cobalt HSS	Carbide	Carbide	Carbide	Carbide
work material	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Quenched and tempered steel (45 to 55 HRC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	High Hardness Steel (50-60 HRC)[◎]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○/◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○/◎] / Aluminum Rolled Material (AL)[○/◎] / Aluminum Alloy Casting (AC, ADC)[○/◎] / Magnesium Alloy (MC)[○/◎] / Zinc Alloy Casting (ZDC)[○/◎] / Titanium Alloy (Ti-6Al-4V, etc)[○/◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Nickel-based alloy (Inconel, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	-	Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○]	Cast Iron (FC)[◎] / Copper (Cu)[◎] / Aluminum Alloy Casting (AC, ADC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Cast Iron (FC)[○] / Copper (Cu)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Nickel-based alloy (Inconel, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎]	Quenched and tempered steel (45 to 55 HRC)[◎]	Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Stainless Steel (JIS-SUS)[○] / Copper (Cu)[◎] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Thermosetting plastic (bakelite, phenol, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]
Tap Type	Spiral Tap	Hand Tap	Thread cutter	Hand Tap	Spiral Tap	Thread cutter	Point tap	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Point tap	Point tap	Roll tap	Roll tap	Roll tap	Point tap	Spiral Tap	Point tap	Tap for pipes	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Roll tap	Spiral Tap	Point tap	Hand Tap	Spiral Tap	Spiral Tap	Spiral Tap	Hand Tap	Roll tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Hand Tap	Thread cutter	Thread cutter	Thread cutter	Thread cutter	Thread cutter
Hole type	For blind hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For through hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole	For blind hole	For blind hole	For blind hole	For through hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole	For through hole / For blind hole	For blind hole	For through hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For through hole / For blind hole	For blind hole	For through hole / For blind hole
Coating Y/N	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available	Available
Coating Type	Other	TiCN	Nitriding Treatment	TiCN / Other	TiN	Nitriding Treatment	Other	TiAlN	DLC	TiAlN	For High Hardness (Silicon Group) / Other	Other	TiN	TiN	TiCN	TiCN	TiN	TiCN	TiAlN	TiN	Nitriding Treatment	Nitriding Treatment	TiAlN	For High Hardness (Silicon Group)	TiN	TiN	TiN	TiCN	TiN	Other	TiN / CrN	TiCN	Non-Coated	TiN	TiN	TiCN	Other	TiN	CrN	Non-Coated	TiN	TiAlN	TiAlN	TiAlN	TiAlN
Overall Length (L)(mm)	34 ～ 250	52 ～ 60	39 ～ 58	40 ～ 105	40 ～ 105	64 ～ 105	80 ～ 200	57 ～ 115	57 ～ 92	58 ～ 73	40	70	46 ～ 88	30 ～ 105	30 ～ 82	60 ～ 200	40 ～ 105	62 ～ 105	62 ～ 82	100 ～ 150	39 ～ 64	39	39 ～ 105	48 ～ 74	46 ～ 75	46 ～ 150	46 ～ 150	46 ～ 82	70 ～ 95	52 ～ 70	40 ～ 120	46 ～ 82	150	34 ～ 95	100 ～ 150	46 ～ 82	40 ～ 95	100 ～ 150	75	46	80 ～ 210	60 ～ 120	62 ～ 89	62 ～ 89	60 ～ 120

1
2
3
4
Next >>

Filter by:

Stock

- Show only stock items
Clear

Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
- Taper for Pipe
- Parallel for Pipes
- Trapezoid
- Miniature
- Other
Clear

Screw size (Nominal)
CTG-54

CTG-42

CTG-36

CTG-28

CTG-22

CTG-16

No0UN

NO.0-80UNF

No.10

S0.1

NO.1-72UNF

NO.1-64UNC

NO.10-32UNF

No.10-32UNF

NO.10-24UNC

No.10-24UNC

No.12

NO.12-28UNF

No.12-28UNF

NO.12-24UNC

No.12-24UNC

No.2

S0.2

NO.2-64UNF

No.2-64UNF

NO.2-56UNC

No.2-56UNC

No.3

S0.3

NO.3-56UNF

No.3-56UNF

NO.3-48UNC

No.3-48UNC

No.4

S0.4

NO.4-48UNF

No.4-48UNF

NO.4-40UNC

No.4-40UNC

No.5

S0.5

NO.5-44UNF

No.5-44UNF

NO.5-40UNC

No.5-40UNC

No.6

S0.6

NO.6-40UNF

No.6-40UNF

No.6-32UNC

S0.7

No.8

S0.8

NO.8-36UNF

No.8-36UNF

NO.8-32UNC

No.8-32UNC

S0.9

1"

1UN

1UNS

G1

G 1"

M1

NPS1

NPT1

NPTF1

No1UN

PF1

PF 1

PT 1

R1

Rp1

S1

UNC 1

UNC 1"

UNF 1"

W1

1'-12UNF

1´-11

1-8UNC

1'-8UNC

G1"-3"

1"1/2UN

1"1/2

G1"1/2

NPS1"1/2

NPT1"1/2

R1"1/2

Rp1"1/2

W1"1/2

1 1/2-8UN

1"1/4UN

1"1/4

G1"1/4

NPS1"1/4

NPT1"1/4

R1"1/4

Rp1"1/4

W1"1/4

1 1/4-8UN

1"1/8UN

G1"1/8

R1"1/8

W1"1/8

1 1/8-8UN

1"1/16UN

1/2

1/2UN

G1/2

G 1/2

NPS1/2

NPT1/2

NPTF1/2

PF 1/2

PT 1/2

R1/2

Rc1/2

Rp1/2

UNC 1/2

UNF 1/2

UNJF 1/2

W1/2

1/2-20UNF

1/2-14

1/2-13UNC

G1/2 5/8

1/2W12

1"3/4UN

G1"3/4

R1"3/4

Rp1"3/4

W1"3/4

1 3/4-8UN

1"3/8UN

G1"3/8

R1"3/8

W1"3/8

1 3/8-8UN

1/4

1/4UN

G1/4

G 1/4

NPS1/4

NPT1/4

NPTF1/4

PF1/4

PF 1/4

PS 1/4

PT 1/4

R1/4

Rc1/4

Rp1/4

SM1/4

UNC 1/4

UNF 1/4

UNJF 1/4

W1/4

1/4-28UNF

1/4-20UNC

1/4-19

1/4W20

W1"5/8

1 5/8-8UN

W1"7/8

1 7/8-8UN

1'W8

1/8

G1/8

G 1/8

NPS1/8

NPT1/8

NPTF1/8

PF1/8

PF 1/8

PT 1/8

R1/8

Rc1/8

Rp1/8

SM1/8

W1/8

1/8-28

1/16

G1/16

NPS1/16

NPT1/16

R1/16

Rp1/16

M1.1

G 1.1/2

G 1.1/4

G 1.1/8

M1.2

S1.2

M1.4

S1.4

M1.6

M1.7

M1.8

2"

2UN

G2

M2

M2.0

NPS2

NPT2

No2UN

R2

Rp2

UNC 2

UNF 2

W2

2-8UN

G2"1/2

R2"1/2

Rp2"1/2

W2"1/4

M2.2

M2.3

M2.5

M2.6

3M

EGM 3

G3

M3

M3.0

No3UN

R3

Rp3

STI M3

UNC 3

UNF 3

G3"1/2

R3"1/2

Rp3"1/2

3/4

3/4UN

G3/4

G 3/4

NPS3/4

NPT3/4

NPTF3/4

PF 3/4

R3/4

Rp3/4

UNC 3/4

UNF 3/4

W3/4

3/4-16UNF

3/4-14

3/4-10UNC

3/4W10

3/8

3/8UN

G3/8

G 3/8

NPS3/8

NPT3/8

NPTF3/8

PF3/8

PF 3/8

R3/8

Rc3/8

Rp3/8

UNC 3/8

UNF 3/8

UNJF 3/8

W3/8

3/8-24UNF

3/8-19

3/8-16UNC

3/8W16

M3 - M10

M3～10

M3 - M12

SM3/16

W3/16

3/16W24

M3 - M18

SM3/32

3.5

M3.5

4

4M

EGM 4

G4

M4

M4.0

MF4

No4UN

R4

Rp4

STI M4

UNC 4

UNF 4

№4-40UNC

M4～6

M4.5

5M

EGM 5

M5

M5.0

MF5

No5UN

STI M5

UNC 5

№5-40UNC

5/8

5/8UN

G5/8

G 5/8

NPS5/8

R5/8

UNC 5/8

UNF 5/8

W5/8

5/8-18UNF

5/8-11UNC

G5/8 3/4

5/8W11

M5 - M12

M5～13

5/16

5/16UN

UNC 5/16

UNF 5/16

UNJF 5/16

W5/16

5/16-24UNF

5/16-18UNC

5/16W18

W5/32

5.5M

M5.5

6

EGM 6

M6

M6.0

MF6

No6UN

STI M6

UNC 6

UNF 6

UNJC 6

No6-40UNF

№6-32UNC

# 6 - 32 UNC

M7

MF7

PG7

7 execution M3 - M12

7/8

7/8UN

G7/8

G 7/8

NPS7/8

R7/8

UNC 7/8

UNF 7/8

W7/8

7/8-14UNF

7/8-9UNC

7/8W9

7/16

7/16UN

UNC 7/16

UNF 7/16

UNJF 7/16

W7/16

7/16-20UNF

7/16-14UNC

7/16W14

SM7/32

7.5

M7.5

EGM 8

M8

MF8

No8UN

STI M8

TV8

Tr8

UNC 8

UNF 8

UNJC 8

№8-32UNC

9

M9

PG9

9/16

9/16UN

UNC 9/16

UNF 9/16

9/16-18UNF

9/16-12UNC

9/16W12

SM9/32

SM9/64

M9.5

EGM 10

M10

MF10

No10UN

STI M10

Tr10

Tr 10

UNC10

UNC 10

UNF 10

UNJF 10

№10-32UNF

№10-24UNC

M10～25

M11

PG11

SM11/32

SM11/64

EGM 12

M12

MF12

Mf12

No12UN

STI M12

Tr12

Tr 12

UNC 12

UNF 12

M12 x 1.5

M13

PG13.5

M14

MF14

Tr 14

M15

SM15/64

M16

MF16

Mf16

PG16

Tr16

Tr 16

M16 x 1.5

M17

M18

MF18

Tr18

Tr 18

M19

M20

MF20

Mf20

Tr 20

M20 x 1.5

M21

PG21

M22

M22X

MF22

Tr 22

M23

M24

M24X

MF24

Tr 24

M25

M25X

MF25

Mf25

Tr 25

M25 x 1.5

M26

MF26

Tr 26

M27

MF27

M28

MF28

Tr 28

PG29

M30

MF30

Tr 30

M32

Mf32

M33

M34

M35

M36

PG36

M37

M38

M39

M40

M42

PG42

M44

M45

M48

M50

M52

M56

M64

1015

1020N100M

1020N150M

06510X28R

10154

12204

12254N100M

12254N150M

12254N200M

16304N100M

16304N150M

16304N200M

16304N250M

20305

20505N100M

20505N150M

20505N200M

20505N300M

20505N350M

25506N100M

25506N150M

25506N200M

25506N300M

25506N350M

32506

32506N150M

32506N200M

32506N300M

035083N075M

035083N080M

040123N100M

060163N050M

060163N100M

060163N125M

065103X28G

075203N125M

075203N150M

080153X19G

080153X19R

080203N050M

080203N100M

090244N125M

090244N175M

100254N050M

100254N100M

100254N150M

100254N200M

120204X14G

120204X14R

120304N100M

120304N150M

120304N200M

160264X11G

160264X11R

160404N150M

160404N200M

160404N250M

200305X11G

200305X11R

200505N150M

200505N200M

200505N300M
Clear

Pitch (P), Number of Threading(mm)
.02

0.025

0.05

0.08

0.1

0.125

0.15

0.175

0.2

0.225

0.25

0.3

0.35

0.4

0.45

0.5

0.6

0.7

0.75

0.8

0.9

1

1.1

1.25

1.4

1.5

1.75

1.9

2

2.5

2.8

3

3.5

4

4.5

5

5.5

6

7

8

9

10

11

11 1/2

11.5

12

13

14

16

18

19

20

24

27

28

32

36

40

44

48

56

64

72

80
Clear

Chamfer threads (Lcf)
1P

1.5-Shaped

1.5 P

1.5P

2

2 P

2P

2.5

2.5 P

2.5P

3 P

3P

3.5P

4

4 P

4P

4.5P

5

5 P

5P

5.5P

6P

7P

8P

9 P

9P

22P

22.5P

23P

24P

24.5P

25P

26P

27P

28P

30P
Drawing

Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Alloy HSS
- Vanadium High-Speed Steel
- JIS-SKS
Details

Clear

work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
Clear

Tap Type
- Spiral Tap
- Point tap
- Roll tap
- Hand Tap
- Tap for pipes
- Thread cutter
- Thread-Cutting-Related Tool
- Die
- Tap wrench
- Modification/removal Tool
- Oil Hole Tap
Clear

Hole type
- For through hole
- For blind hole
Clear

Coating Y/N
- Available
- N/A
Clear

Coating Type
- For High Hardness (Silicon Group)
- TiAlN
- TiCN
- TiN
- DLC
- CrN
- Non-Coated
- Nitriding Treatment
- Other
Details

Clear

Overall Length (L)(mm)
16

30

32

33

34

35

36

38

39

40

41

41.5

42

44

44.5

45

46

47.62

47.625

48

49

49.21

50

50.8

51

52

53

53.975

53.98

54

55

55.28

55.64

55.92

56

57

58

59

59.5

60

60.32

60.325

61

61.5

62

62.52

62.65

63

63.5

64

65

66

67

68

69

69.06

69.063

69.42

69.71

70

72

73

74

74.61

74.625

75

76

78

79

79.03

79.31

80

80.17

82

83

84

85

85.72

87

88

89

89.12

89.18

90

91

91.28

92

95

96

96.84

98.97

99

99.21

100

101

102

104

105

108

109

109.65

110

111

112

113.5

115

118

119

120

121

125

130

130.175

130.2

135

136

140

145

150

155

160

163

165

170

175

180

185

190

195

200

205

210

220

224

225

230

250

260

270

280

290

300

310

315

460
Drawing

Clear

Brand

- MISUMI (8)
- Cost Efficient Products ()
- OSG (55)
- YAMAWA MFG (39)
- CARMEX (35)
- NACHI(FUJIKOSHI) (6)
- GUHRING (5)
- SANDVIK (5)
- TANOI MFG (4)
- ISHIHASHI (3)
- EIKOSHA (2)
- NS TOOL (2)
- BERNSTEIN AG (0)
- KANETEC (0)
- MITSUTOMO (0)
- NEW STRONG (0)
- STAHLWILLE (0)
- H & H (0)
- RUKO (0)
- WALTER PROTOTYP (0)
- BAHCO (0)
- ENGINEER (0)
- LIGHTSEIKI (0)
- HAZET (0)
- TRUSCO NAKAYAMA (0)
- WERA (0)
- WIHA (0)
- FEIN (0)
- SKC (0)
- RENNSTEIG (0)
- GEDORE (0)
- ESCO (0)
- REX TOOLS (0)
- NOGAJAPAN (0)
Clear