Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
HCMGH8-35
Type | Material | Hardness | Surface Treatment | Accessory | ||
L Dimension Selectable | L Dimension Configurable | |||||
HCMG | HCLGN | EN 1.1191 Equiv. L Dimension Selectable Type is EN 1.1191 Equiv. | - | Black Oxide | Cotter Pin 1 pc. | EN 1.0310 Equiv. |
HCMGH | HCLGHN | 40~45HRC | ||||
- | PHCLGN | - | Electroless Nickel Plating | EN 1.4301 Equiv. | ||
- | PHCLGHN | 40~45HRC | ||||
- | GHCLGN | Plating Hardness 750HV~ | Hard Chrome Plating | EN 1.0310 Equiv. | ||
SHCMG | SHCLGN | EN 1.4301 Equiv. | - | - | EN 1.4301 Equiv. | |
- | SHCLGHN | EN 1.4125 Equiv. | 45~50HRC | |||
- | GSHCLGHN | 45~50HRC Plating Hardness 750HV~ | Hard Chrome Plating |
Part Number | - | L |
HCMG8 HCLGN15 | - - | 30 120.3 |
D Tolerance (g6) | |
3 | -0.002 -0.008 |
4~6 | -0.004 -0.012 |
8, 10 | -0.005 -0.014 |
12~18 | -0.006 -0.017 |
20~25 | -0.007 -0.020 |
Part Number | L Selection | L1 | N | u | (n) | d | T | H | Included Cotter Pin | Unit Price | ||||||||||||||||||
Type | D | HCMG HCMGH | SHCMG | HCMG | HCMGH | SHCMG | ||||||||||||||||||||||
HCMG HCMGH (Hardened) SHCMG (Stainless Steel) | 3 | 10 | 12 | 14 | 15 | 16 | 18 | 20 | L+ 4.4 | 2.5 | 2.9 | 1.5 | 0.8 | 1.5 | 5.5 | NPN0.8- 8 | NSPN0.8- 8 | |||||||||||
4 | L+ 4.5 | 3.9 | 1 | 6.5 | NPN1 -10 | NSPN1 -10 | ||||||||||||||||||||||
5 | L+ 5.6 | 3.5 | 4.9 | 1.2 | 8 | NPN1.2-10 | NSPN1.2-10 | |||||||||||||||||||||
6 | 15 | 16 | 18 | 20 | 22 | 24 | 25 | 30 | L+ 5.8 | 5.8 | 1.6 | 9 | NPN1.6-10 | NSPN1.6-10 | ||||||||||||||
8 | 18 | 20 | 22 | 24 | 25 | 30 | 35 | 40 | 45 | 50 | L+ 7 | 4 | 7.8 | 2 | 2 | 12 | NPN2 -12 | NSPN2 -12 | ||||||||||
10 | L+ 8.25 | 5 | 9.8 | 2.5 | 14 | NPN2.5-15 | NSPN2.5-15 | |||||||||||||||||||||
12 | 22 | 24 | 25 | 30 | 35 | 40 | 45 | 50 | L+10.6 | 6 | 11.8 | 3.2 | 3 | 17 | NPN3.2-20 | NSPN3.2-20 |
Part Number | L=0.1mm Increment | L1 | N | u | (n) | d | T | H | Included Cotter Pin | Unit Price | |||||||||
Type | D | HCLGN HCLGHN GHCLGN | PHCLGN SHCLGN PHCLGHN SHCLGHN GSHCLGHN | HCLGN | HCLGHN | PHCLGN | PHCLGHN | GHCLGN | SHCLGN | SHCLGHN | GSHCLGHN | ||||||||
HCLGN HCLGHN PHCLGN PHCLGHN GHCLGN SHCLGN SHCLGHN GSHCLGHN | 3 | 5.0~50.0 | L+ 4.4 | 2.5 | 2.9 | 1.5 or Less | 0.8 | 1.5 | 5.5 | NPN0.8- 8 | NSPN0.8- 8 | ||||||||
4 | L+ 4.5 | 3.9 | 1 | 6.5 | NPN1 -10 | NSPN1 -10 | |||||||||||||
5 | 10.0~60.0 | L+ 5.6 | 3.5 | 4.9 | 1.2 | 8 | NPN1.2-10 | NSPN1.2-10 | |||||||||||
6 | 10.0~100.0 | L+ 5.8 | 5.8 | 1.6 | 9 | NPN1.6-10 | NSPN1.6-10 | ||||||||||||
8 | L+ 7 | 4 | 7.8 | 2 | 2 | 12 | NPN2 -12 | NSPN2 -12 | |||||||||||
10 | 15.0~100.0 | L+ 8.25 | 5 | 9.8 | 2.5 | 14 | NPN2.5-15 | NSPN2.5-15 | |||||||||||
12 | 15.0~200.0 | L+10.6 | 6 | 11.8 | 3.2 | 3 | 17 | NPN3.2-20 | NSPN3.2-20 | ||||||||||
13 | 20.0~200.0 | L+12 | 7 | 12.8 | 4 | 18 | NPN4 -20 | NSPN4 -20 | |||||||||||
14 | 13.8 | 19 | |||||||||||||||||
15 | 14.8 | 20 | |||||||||||||||||
16 | 20.0~200.0 | 15.8 | 21 | NPN4 -25 | NSPN4 -25 | ||||||||||||||
17 | 16.8 | 22 | |||||||||||||||||
18 | 17.8 | 23 | |||||||||||||||||
20 | L+14.5 | 8 | 19.8 | 5 | 4 | 26 | NPN5 -35 | NSPN5 -35 | |||||||||||
22 | 21.8 | 27 | |||||||||||||||||
25 | L+15.5 | 9 | 24.8 | 30 |
3D preview is not available, because the part number has not yet been determined.
Part Number
|
---|
HCMGH8-35 |
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | [D] Shaft Diameter (mm) | Material | Hardness | Surface Treatment | Material Detail | Type | L Dimension (mm) | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
5.22 € | 1 | Available | 4 Days | 10 | 8 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | L Dimension Fixed | 35 |
Loading...
Basic Shape | Shouldered | Mounting Method | Split Pin |
---|
This page is Hinge pins / collar / stainless steel, steel / split pin hole / incl. split pin, part number HCMGH8-35.
You can find the detail information about specifications and dimensions on part number HCMGH8-35.
Configure
Basic Attributes
Type
[D] Shaft Diameter(mm)
Material
Hardness
Surface Treatment
Material Detail
Type
L Dimension(mm)
Filter by CAD data type
Filter by standard shipping days
Optional Attributes
Part Number |
---|
HCMG10-24 |
HCMG10-25 |
HCMG10-30 |
HCMGH8-40 |
HCMGH8-45 |
HCMGH8-50 |
Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Standard Shipping Days ? | RoHS | [D] Shaft Diameter (mm) | Material | Hardness | Surface Treatment | Material Detail | Type | L Dimension (mm) |
---|---|---|---|---|---|---|---|---|---|---|---|---|
5.05 € | 1 | Available | 4 Days | 10 | 10 | Steel | Not Specified | Black Oxide | EN 1.1191 Equiv. | L Dimension Fixed | 24 | |
5.05 € | 1 | Available | 4 Days | 10 | 10 | Steel | Not Specified | Black Oxide | EN 1.1191 Equiv. | L Dimension Fixed | 25 | |
5.05 € | 1 | Available |
Same day
Stock | 10 | 10 | Steel | Not Specified | Black Oxide | EN 1.1191 Equiv. | L Dimension Fixed | 30 | |
5.22 € | 1 | Available | 4 Days | 10 | 8 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | L Dimension Fixed | 40 | |
5.22 € | 1 | Available | 4 Days | 10 | 8 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | L Dimension Fixed | 45 | |
5.22 € | 1 | Available | 4 Days | 10 | 8 | Steel | Hardness Spec-designed | Black Oxide | EN 1.1191 Equiv. | L Dimension Fixed | 50 |