• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Bearing housings / stepped compact flange / counterbore, internal thread / circlip / deep groove ball bearing / aluminium, stainless steel / anodised

Bearing housings / stepped compact flange / counterbore, internal thread / circlip / deep groove ball bearing / aluminium, stainless steel / anodised
  • Volume Discount

MISUMI

MISUMI

Data sheet

Unit еxample related to this product
90° Rotational transfer mechanism
Search for оther еxamples

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Back to the Category Bearings with Housing

Technical Drawing - Bearings with Housing

Low Dust Raise Greased/Single Bearing:Related Image

Available dimensions and tolerances can be found under the tab More information.
 

Basic Properties (e.g., material, hardness, coating, tolerance) - Bearings with Housing

Accessory: Retaining Ring (EN 1.4301 Equiv.)
RetainedPilot, RetainedNon-RetainedMaterialSurface Treatment
BearingHousingHousing
S-SBACAS-SBACRS-SBACNStainless SteelAluminum Alloy 2000 seriesClear Anodize
S-SBGCAS-SBGCRS-SBGCNEN 1.4301 Equiv.-
Bearing may protrude 0.1 to 0.2mm due to negative tolerance of B dimension for holding bearing outer rings in place.
Mounting holes are tapped and counterbored so the housing can be mounted from either side.

Further specifications can be found under the tab More information.
Information about tolerances can be found under ball bearing table / tolerances as PDF

 

Composition of a Product Code - Bearings with Housing
 
Part Number
S-SBACA6900ZZ

Note: the bearing number used is included in the bearing housing part number.
 

Alterations - Bearings with Housing


Low Dust Raise Greased/Single Bearing:Related Image
 

General Information - Bearings with Housing

 

Bearing housing assortment - flange bearing - pedestal bearing T-shape - pedestal bearing L-shape - flange bearing housing - bearing housing straight - bearing with housing

 

Bearings with Housing/Bearing Housings/Bearing Units Selection Details

- Housing material: aluminum, steel, stainless steel

- Coatings: uncoated, burnished, anodized, nickel-plated

- Ball bearing material: steel, stainless steel

- ISO tolerances: Ball bearing table/tolerances available as PDF

- bearing housing types: round flange, square flange, compact flange, guide flange, T-shape, L-shape, block shape

- Ball bearing types: deep groove ball bearings, angular ball bearings

- Inner diameter: from 3 mm to 50 mm

 

The variety of bearing housings can be found in the Overview of the Types of Pedestal Bearings available as a PDF.

The different designs of the flange bearings can be found in the Overview of the Types of Flange Bearing Housing available as PDF.

 

Description/Basics

Bearing housings are highly robust and allow for easy and quick assembly. They are used to accommodate rotating machine elements in mechanical engineering. The housing bearings are generally provided for receiving rotary shafts or torsional shafts. Bearing housing types include pedestal bearings, flange bearings, tension bearings, and pillow blocks. They can be fitted with simple ball bearings. However, there are bearing housings in which angular contact ball bearings are installed that can also absorb axial forces. Housing bearings are available with single-row, double-row and three-row deep-groove ball bearings or angular contact ball bearings. The different designs of the bearing housings can be used horizontally or vertically. For horizontal mounting, MISUMI offers bearing housings as a vertical pedestal bearing in L- and T-shape, as well as a square bearing block. Flange bearing housings, also called flange bearings, are often used for vertical mounting. A bearing unit from MISUMI, whether a pedestal bearing or a flange bearing, is available in double or triple bearings (with rolling bearings) to absorb any lever forces.
The ball bearings are secured in the bearing housings with retaining rings or bearing covers. The bearing can thus be replaced as needed.

 

Two-row and multi-row bearing housings

Multi-row bearing housings are well-suited for applications subjected to lever forces. They can contribute to increased rotational stability as a flange bearing housing or a pedestal bearing housing.
The flange bearing with angular ball bearing and screwed bearing cover can be used as a fixed bearing. In this case, a floating bearing is recommended in the assembly group.
The combination of fixed and floating bearings can ensure length compensation. This prevents an undesirable compression of a shaft or a threaded drive. A compression can create an imbalance and thus vibrations in an application and lead to inaccuracy


Example of double row flange bearing - three row flange bearing - flange bearing housing with grooved ball bearing - flange bearing housing with angular ball bearing - bearing with housing

Example – multi-row bearing housing – (1) deep groove ball bearing, (2) flange bearing housing, (3) bearing cover, (4) bearing cover screw, (5) angular ball bearing, (6) spacer sleeve, (7) spacer sleeve for inner ring

 

Ball bearing seals for bearing housings

ZZ (2Z): double encapsulated
VV (2RZ): contactless rubber seal
DD (2RS): contact rubber seal (slightly increased friction)

 

Areas of Application

MISUMI’s bearing housings, flange bearings and pedestal bearings can be used in almost all applications. Bearing housings are often used as flange bearings or pedestal bearings for the bearing of ball screws and rotary shafts. In addition, they are often found in conveyor belts, or in the bearings of shafts in timing belts, as well as chain transmission. As a fixed and floating bearing, the bearing units can withstand high loads and speeds of rotation. In addition, the encapsulated or sealed bearings are protected from external influences.

 

Materials

Bearing unit housings are available in steel, stainless steel, and aluminum. Due to the alterations of selecting the ball bearings, a pedestal bearing housing or flange bearing housing can consist of various types of materials. The bearing housings are optionally installed with steel or stainless steel ball bearings. In addition, a bearing housing that can be used as a fixed bearing can additionally be provided on the bearing housing with a rubber seal.

 

Coatings

MISUMI’s pedestal bearings and flange bearings made of steel can be optionally burnished, painted, chemically nickel-plated. The aluminum bearing housings can be anodized to provide the best possible protection against corrosion depending on the need or the environmental conditions.

 

Dimensions

Types of pedestal bearings

Shape

Mounting method

Features

T-shape (extruded)

Pedestal bearing extruded - pedestal bearing housing T-shape - bearing housing with retaining ring - bearing housing corners rounded - bearing with housing

- economically extruded housing
- up to 30% less expensive than milled housings
- higher security thanks to rounded corners

T-shape

Pedestal bearing T-shape - bearing housing with retaining ring - pedestal bearing housing corners chamfered - bearing with housing

- stable despite its narrow design
- available for high positioning accuracy with groove
- optionally with lubricant for low particle formation

L-shape

Bearing housing L-shape - pedestal bearing narrow - bearing housing with retaining ring - bearing with housing

- Low width

Block shape (internal thread)

Bearing housing block shape with female thread - pedestal bearing bottom mounting - bearing block with female thread - bearing with housing

- Fastened from underneath through the internal thread
- Compact design for limited installation space

Block shape

Bearing housing block shape with through hole - pedestal bearing with through hole - bearing block with hole - pedestal bearing housing block shape - bearing with housing

- Low assembly height

Straight

Bearing housing straight - bearing housing side mounting - bearing housing with cross hole - bearing housing end assembly - bearing with housing

- Fastening from the front
- Compact design for limited installation space
- Offset design with height accuracy +/- 0.02 mm

Table – Application of pedestal bearings


Flange bearing designs

Ball bearing

Design

utilisation

Easy

Small diameter flange bearing - flange bearing housing with counterbore - flange bearing flat - bearing housing round - flange bearing

- Can be used at several shaft positions
- Space-saving version available with small diameter

With centering collar
Flange bearing with centering collar - flange bearing housings with centering - flange bearing with collar - flange bearing

- Often used to secure multiple locations
- The centering collar can be used for positioning

Double

Heavy duty Flange bearing housing - double flange bearing - two-ball bearings - flange bearing

- Suitable for heavy loads
- Additional support of the shaft
- Length freely selectable

With centering collar
Flange bearing housing double with centering collar - flange bearing with centering - flange bearing with two ball bearings - flange bearing

- Suitable for heavy loads
- The centering collar can be used for positioning
- Length freely selectable

Table – Flange Bearing Application

 

Instructions for Use / Installation Information - Bearings with Housing

 

Installation Information

When assembling bearing housings, care must be taken to ensure that they are installed without tension to prevent vibration, noise and damage. The holes or threads on the mounting surface should therefore be positioned as accurately as possible to prevent stresses on the shaft or spindle. In addition, dowel pins in the base plate can be a helpful option. Also, when installing the bearing housings, make sure that the contact surfaces are clean.
In addition, MISUMI offers special types of bearing housings, which have a positioning groove on the underside to predetermine a precise alignment.


Bearing housing assembly with dowel pin - bearing housing assembly with keyway - pedestal bearing positioning - pedestal bearing housing assembly

Application example – pedestal bearing mounting with dowel pin, pedestal bearing mounting with keyway, (1) dowel pin

The alteration [NA] allows for the bearing housings and ball bearings not to be delivered pre-assembled. This can significantly simplify assembly depending on the assembly procedure.
In some variants with angular contact bearings, the bearings must be greased during assembly.
 

Flange bearing housing with female thread

MISUMI offers another special form with the flange bearing with female thread. This flange bearing has the advantage that it can be mounted from the front and the rear. This flange bearing housing provides high mounting flexibility and the ability to standardize and reduce the variety of bearing housings.


Female threaded bearing housing - flange-type female threaded bearing housing - flange-type and female threaded bearing

Application example – (1) Flange bearing housing assembly with female thread, (2) flange bearing housing mounting with counterbore


Bearing housing for axial load

If high axial forces occur, MISUMI offers a special form of flange bearings in the combination of needle bearings for radial forces and axial ball bearings for axial forces.


Flange bearing housing with axial ball bearings - flange bearings with needle bearings and axial bearing - flange bearing

Application example – (1) bearing housing with needle bearing and BGCT axial ball bearing, (F) load direction


Maintenance

For bearing housings, the installed bearing can be replaced after the service life has been reached. If the bearings are pressed into the bearing housing, it is recommended to replace the bearing together with the housing. The bearing number installed in the MISUMI bearing housing is discernible from the article number of the bearing unit.
Further information about the various application of bearings can be found under the tab More Information.
Note : After determining the bearing number, you can enter it in the search window to determine the load values and specifications of the bearing for the calculation.
 

Application examples

Application example - flange bearing housing with angular ball bearing - flange bearing with three ball bearings - fixed bearing - bearing with housing

Application example of a flange bearing housing
(1) Collar, (2) Bearing lock nut, (3) Deep groove ball bearing, (4) Housing, (5) Rotary shaft, (6) O-ring, (7) Angular ball bearing, (8) Collar
 


Application example - pedestal bearing housing with conveyor belt - pedestal bearing for conveyor belt - bearing with housing

Application example of a pedestal bearing with conveyor belt
(1) Pedestal bearing, (2) Rotary shaft, (3) Conveyor belt, (4) Idler for flat belts, (5) Collar
 



Application example - bearing housing front mount - bearing housing straight - bearing housing with cross hole - bearing with housing

Application example of a bearing housing
(1) Bearing housing, (2) Metal washer, (3) Screw, (4) Mounting plate, (5) Nut



Application example - Flange bearing housing with clamping ring - Flange bearing with adjusting ring - Flange bearing - Flange bearing with two ball bearings

Application example of a flange bearing housing with clamping ring
(1) Flange bearing, (2) Clamping ring

 

Supplementary Article

 

Rotary shafts

Rotary axes - rotary shafts - assortment

 

Drive shafts

Drive shafts - motor shafts - assortment

 

Bearing Lock Nuts

Shaft nuts - groove nuts - assortment

 

Washers / Collars (Metal)

Metal discs - sleeves - assortment

 

Screws

Screws - threaded screws - shoulder screws - collar screws - countersunk screws - hexagon screws - cylinder head screws - assortment

 

Industrial Applications

 

3D printer industry
Automotive industry
Pharmaceutical industry
Packaging industry

 

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. Next >>
Part Number
S-SBACA6000ZZ
S-SBACA6001ZZ
S-SBACA6002ZZ
S-SBACA6004ZZ
S-SBACA605ZZ
S-SBACA606ZZ
S-SBACA608ZZ
S-SBACA6200ZZ
S-SBACA6201ZZ
S-SBACA6202ZZ
S-SBACA6204ZZ
S-SBACA623ZZ
S-SBACA624ZZ
S-SBACA625ZZ
S-SBACA6900ZZ
S-SBACA6901ZZ
S-SBACA6902ZZ
S-SBACA6904ZZ
S-SBACN6000ZZ
S-SBACN6001ZZ
S-SBACN6002ZZ
S-SBACN6004ZZ
S-SBACN605ZZ
S-SBACN606ZZ
S-SBACN608ZZ
S-SBACN6200ZZ
S-SBACN6201ZZ
S-SBACN6202ZZ
S-SBACN6204ZZ
S-SBACN623ZZ
S-SBACN624ZZ
S-SBACN625ZZ
S-SBACN6900ZZ
S-SBACN6901ZZ
S-SBACN6902ZZ
S-SBACN6904ZZ
S-SBACR6000ZZ
S-SBACR6001ZZ
S-SBACR6002ZZ
S-SBACR6004ZZ
S-SBACR605ZZ
S-SBACR606ZZ
S-SBACR608ZZ
S-SBACR6200ZZ
S-SBACR6201ZZ
S-SBACR6202ZZ
S-SBACR6204ZZ
S-SBACR623ZZ
S-SBACR624ZZ
S-SBACR625ZZ
S-SBACR6900ZZ
S-SBACR6901ZZ
S-SBACR6902ZZ
S-SBACR6904ZZ
S-SBGCA6000ZZ
S-SBGCA6001ZZ
S-SBGCA6002ZZ
S-SBGCA6004ZZ
S-SBGCA606ZZ
S-SBGCA608ZZ
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSBearing I.D. d
(mm) 		Holder Material Retaining Ring Thickness T
(mm) 		Holder Surface Treatment Bearing Part Number Flange Outer Dia. H
(Ø)

26.06 €

1 Available 8 Days 1010[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided13Clear Anodize600050

27.71 €

1 Available 8 Days 1012[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided13Clear Anodize600152

29.36 €

1 Available 8 Days 1015[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided14Clear Anodize600260

36.70 €

1 Available 8 Days 1020[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided18Clear Anodize600477

21.01 €

1 Available 8 Days 105[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided10Clear Anodize60538

22.91 €

1 Available 8 Days 106[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided11Clear Anodize60639

25.05 €

1 Available 8 Days 108[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided12Clear Anodize60845

27.95 €

1 Available 8 Days 1010[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided14Clear Anodize620054

28.47 €

1 Available 8 Days 1012[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided15Clear Anodize620156

30.61 €

1 Available 8 Days 1015[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided17Clear Anodize620264

39.22 €

1 Available 8 Days 1020[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided20Clear Anodize620481

19.61 €

1 Available 8 Days 103[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided9Clear Anodize62333

20.12 €

1 Available 8 Days 104[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided10Clear Anodize62435

22.27 €

1 Available 8 Days 105[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided10Clear Anodize62538

27.57 €

1 Available 8 Days 1010[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided11Clear Anodize690045

30.99 €

1 Available 8 Days 1012[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided11Clear Anodize690148

32.14 €

1 Available 8 Days 1015[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided12Clear Anodize690257

36.82 €

1 Available 8 Days 1020[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided15Clear Anodize690469

32.46 €

1 Available 8 Days 1010[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesNot Provided10Clear Anodize600050

34.51 €

1 Available 8 Days 1012[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesNot Provided10Clear Anodize600152

37.23 €

1 Available 8 Days 1015[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesNot Provided11Clear Anodize600260

45.25 €

1 Available 8 Days 1020[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesNot Provided14Clear Anodize600477

27.15 €

1 Available 8 Days 105[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesNot Provided7Clear Anodize60536

28.87 €

1 Available 8 Days 106[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesNot Provided8Clear Anodize60639

30.91 €

1 Available 8 Days 108[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesNot Provided9Clear Anodize60845

34.86 €

1 Available 8 Days 1010[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesNot Provided11Clear Anodize620054

35.54 €

1 Available 8 Days 1012[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesNot Provided12Clear Anodize620156

41.68 €

1 Available 8 Days 1015[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesNot Provided13Clear Anodize620264

48.51 €

1 Available 8 Days 1020[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesNot Provided16Clear Anodize620481

25.11 €

1 Available 8 Days 103[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesNot Provided6Clear Anodize62333

25.97 €

1 Available 8 Days 104[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesNot Provided7Clear Anodize62435

28.18 €

1 Available 8 Days 105[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesNot Provided7Clear Anodize62538

37.74 €

1 Available 8 Days 1010[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesNot Provided8Clear Anodize690045

36.89 €

1 Available 8 Days 1012[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesNot Provided8Clear Anodize690148

42.01 €

1 Available 8 Days 1015[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesNot Provided9Clear Anodize690257

45.43 €

1 Available 8 Days 1020[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesNot Provided11Clear Anodize690469

47.14 €

1 Available 8 Days 1010[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided13Clear Anodize600050

50.21 €

1 Available 8 Days 1012[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided13Clear Anodize600152

54.48 €

1 Available 8 Days 1015[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided14Clear Anodize600260

65.76 €

1 Available 8 Days 1020[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided18Clear Anodize600477

38.26 €

1 Available 8 Days 105[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided10Clear Anodize60536

36.55 €

1 Available 8 Days 106[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided11Clear Anodize60639

44.75 €

1 Available 8 Days 108[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided12Clear Anodize60845

50.73 €

1 Available 8 Days 1010[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided14Clear Anodize620054

51.58 €

1 Available 8 Days 1012[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided15Clear Anodize620156

56.37 €

1 Available 8 Days 1015[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided17Clear Anodize620264

70.04 €

1 Available 8 Days 1020[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided20Clear Anodize620481

35.35 €

1 Available 8 Days 103[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided9Clear Anodize62333

36.89 €

1 Available 8 Days 104[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided10Clear Anodize62435

36.38 €

1 Available 8 Days 105[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided10Clear Anodize62538

50.73 €

1 Available 8 Days 1010[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided11Clear Anodize690045

51.41 €

1 Available 8 Days 1012[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided11Clear Anodize690148

56.70 €

1 Available 8 Days 1015[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided12Clear Anodize690257

67.13 €

1 Available 8 Days 1020[EN AW-2017 Equiv.] Aluminum Alloy 2000 seriesProvided15Clear Anodize690469

49.53 €

1 Available 8 Days 1010EN 1.4301 Equiv.Provided13Not Provided600050

51.75 €

1 Available 8 Days 1012EN 1.4301 Equiv.Provided13Not Provided600152

58.25 €

1 Available 8 Days 1015EN 1.4301 Equiv.Provided14Not Provided600260

77.03 €

1 Available 8 Days 1020EN 1.4301 Equiv.Provided18Not Provided600477

46.45 €

1 Available 8 Days 106EN 1.4301 Equiv.Provided11Not Provided60639

50.73 €

1 Available 8 Days 108EN 1.4301 Equiv.Provided12Not Provided60845

Loading...

  1. 1
  2. 2
  3. Next >>

Back to the Category Bearings with Housing

Technical Drawing - Bearings with Housing

Low Dust Raise Greased/Single Bearing:Related Image
Specification Tables - Bearings with Housing

 

Part NumberdDH7 BHWTT1T2dhD1g7 AFM (Coarse)(d2)d1H1
TypeBearing No.ToleranceTolerance
Retained
S-SBACA
S-SBGCA


Pilot, Retained
S-SBACR
S-SBGCR


Non-Retained
S-SBACN
S-SBGCN		623ZZ310+ 0.015
0		43316976714-0.006
-0.024		24-M4
(3.3)		6.53.4
624ZZ413+ 0.018
0		53518108791726
605ZZ514536201087101826M5
(4.3)		84.4
625ZZ5165382210871220-0.007
-0.028		28
606ZZ617639231198132129
608ZZ822+ 0.021
0		7452912109182735
6900ZZ1022645291198192735
6000ZZ26850341311102232-0.009
-0.034		40
6200ZZ3095438141211243644
6901ZZ12246483111982130-0.007
-0.028		38
6001ZZ28852361311102434-0.009
-0.034		42
6201ZZ32+ 0.025
0		105640151312263846
6902ZZ1528+ 0.021
0		7573712109253545M6
(5.2)		9.55.4
6002ZZ32+ 0.025
0		96040141211283848
6202ZZ35116444171513294252
6904ZZ20379694715131134455124M8
(6.8)		116.5
6004ZZ4212775418161436505632
6204ZZ471481582018164054-0.010
-0.040		5934
 
Alterations - Bearings with Housing


Low Dust Raise Greased/Single Bearing:Related Image

 

Basic information

Shape Flange Type Bearing Used Deep Groove Ball Bearings Bearing Material Stainless Steel
Number of Bearings Single Flange Shape Compact Type Type Bearings with Housings
Seals ZZ (Double Shield)

Configure

Clear all

99Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Bearing I.D. d(mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 15
    • 20

    Clear

  • Holder Material

    • EN 1.4301 Equiv.
    • EN AW-2017 Equiv.
      • Aluminum Alloy 2000 series

    Clear

  • Retaining Ring

    • Not Provided
    • Provided

    Clear

  • Thickness T(mm)

    • 6
    • 7
    • 8
    • 9
    • 10
    • 11
    • 12
    • 13
    • 14
    • 15
    • 16
    • 17
    • 18
    • 20

    Clear

  • Holder Surface Treatment

    • Clear Anodize
    • Not Provided

    Clear

  • Bearing Part Number

    • 605
    • 606
    • 608
    • 623
    • 624
    • 625
    • 6000
    • 6001
    • 6002
    • 6004
    • 6200
    • 6201
    • 6202
    • 6204
    • 6900
    • 6901
    • 6902
    • 6904

    Clear

  • Flange Outer Dia. H(Ø)

    • 33
    • 35
    • 36
    • 38
    • 39
    • 45
    • 48
    • 50
    • 52
    • 54
    • 56
    • 57
    • 60
    • 64
    • 69
    • 77
    • 81

    Clear

  • Type

    • S-SBACA
    • S-SBACN
    • S-SBACR
    • S-SBGCA
    • S-SBGCN
    • S-SBGCR

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 8 Days or Less

    Reset

Optional Attributes

  • The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Complementary Products

MISUMI Unit еxample related to this product

Search for оther еxamples

back next

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.