• Brands
  • Company
  • Contact
EN / UK
Type Code Seach | *NOT READY*
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Bearing housings / T-shape / through hole / retaining ring / deep groove ball bearing / aluminium, stainless steel / anodised

Bearing housings / T-shape / through hole / retaining ring / deep groove ball bearing / aluminium, stainless steel / anodised

Click on this image to zoom in.

Click on this image to zoom in.

MISUMI

MISUMI

Data sheet

Unit еxample related to this product
Rotating table
Search for оther еxamples

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Back to the Category Bearings with Housing

Technical Drawing - Bearings with Housing

Low Dust Raise Greased/T-Shaped/Retained:Related Image

Available dimensions and tolerances can be found under the tab More information.
 

Basic Properties (e.g., material, hardness, coating, tolerance) - Bearings with Housing
 
TypeMaterialSurface TreatmentAccessory Retaining Ring
h Selectableh ConfigurableBearingHousingHousing
S-BGHKSAS-BGHFSAStainless SteelEN AW-2017 Equiv.Clear AnodizeEN 1.4301 Equiv.
S-BGHKSS-BGHFSEN 1.4301 Equiv.-
 

Further specifications can be found under the tab More information.
Information about tolerances can be found under ball bearing table / tolerances as PDF

 

Composition of a Product Code - Bearings with Housing
 
Part Number-h
S-BGHKSA6200ZZ
S-BGHFSA6902ZZ		-
-		30
37

Note: the bearing number used is included in the bearing housing part number.
 

Alterations - Bearings with Housing


T-Shaped/Base Mount/Retained:Related Image
 

General Information - Bearings with Housing

 

Bearing housing assortment - flange bearing - pedestal bearing T-shape - pedestal bearing L-shape - flange bearing housing - bearing housing straight - bearing with housing

 

Bearings with Housing/Bearing Housings/Bearing Units Selection Details

- Housing material: aluminum, steel, stainless steel

- Coatings: uncoated, burnished, anodized, nickel-plated

- Ball bearing material: steel, stainless steel

- ISO tolerances: Ball bearing table/tolerances available as PDF

- bearing housing types: round flange, square flange, compact flange, guide flange, T-shape, L-shape, block shape

- Ball bearing types: deep groove ball bearings, angular ball bearings

- Inner diameter: from 3 mm to 50 mm

 

The variety of bearing housings can be found in the Overview of the Types of Pedestal Bearings available as a PDF.

The different designs of the flange bearings can be found in the Overview of the Types of Flange Bearing Housing available as PDF.

 

Description/Basics

Bearing housings are highly robust and allow for easy and quick assembly. They are used to accommodate rotating machine elements in mechanical engineering. The housing bearings are generally provided for receiving rotary shafts or torsional shafts. Bearing housing types include pedestal bearings, flange bearings, tension bearings, and pillow blocks. They can be fitted with simple ball bearings. However, there are bearing housings in which angular contact ball bearings are installed that can also absorb axial forces. Housing bearings are available with single-row, double-row and three-row deep-groove ball bearings or angular contact ball bearings. The different designs of the bearing housings can be used horizontally or vertically. For horizontal mounting, MISUMI offers bearing housings as a vertical pedestal bearing in L- and T-shape, as well as a square bearing block. Flange bearing housings, also called flange bearings, are often used for vertical mounting. A bearing unit from MISUMI, whether a pedestal bearing or a flange bearing, is available in double or triple bearings (with rolling bearings) to absorb any lever forces.
The ball bearings are secured in the bearing housings with retaining rings or bearing covers. The bearing can thus be replaced as needed.

 

Two-row and multi-row bearing housings

Multi-row bearing housings are well-suited for applications subjected to lever forces. They can contribute to increased rotational stability as a flange bearing housing or a pedestal bearing housing.
The flange bearing with angular ball bearing and screwed bearing cover can be used as a fixed bearing. In this case, a floating bearing is recommended in the assembly group.
The combination of fixed and floating bearings can ensure length compensation. This prevents an undesirable compression of a shaft or a threaded drive. A compression can create an imbalance and thus vibrations in an application and lead to inaccuracy


Example of double row flange bearing - three row flange bearing - flange bearing housing with grooved ball bearing - flange bearing housing with angular ball bearing - bearing with housing

Example – multi-row bearing housing – (1) deep groove ball bearing, (2) flange bearing housing, (3) bearing cover, (4) bearing cover screw, (5) angular ball bearing, (6) spacer sleeve, (7) spacer sleeve for inner ring

 

Ball bearing seals for bearing housings

ZZ (2Z): double encapsulated
VV (2RZ): contactless rubber seal
DD (2RS): contact rubber seal (slightly increased friction)

 

Areas of Application

MISUMI’s bearing housings, flange bearings and pedestal bearings can be used in almost all applications. Bearing housings are often used as flange bearings or pedestal bearings for the bearing of ball screws and rotary shafts. In addition, they are often found in conveyor belts, or in the bearings of shafts in timing belts, as well as chain transmission. As a fixed and floating bearing, the bearing units can withstand high loads and speeds of rotation. In addition, the encapsulated or sealed bearings are protected from external influences.

 

Materials

Bearing unit housings are available in steel, stainless steel, and aluminum. Due to the alterations of selecting the ball bearings, a pedestal bearing housing or flange bearing housing can consist of various types of materials. The bearing housings are optionally installed with steel or stainless steel ball bearings. In addition, a bearing housing that can be used as a fixed bearing can additionally be provided on the bearing housing with a rubber seal.

 

Coatings

MISUMI’s pedestal bearings and flange bearings made of steel can be optionally burnished, painted, chemically nickel-plated. The aluminum bearing housings can be anodized to provide the best possible protection against corrosion depending on the need or the environmental conditions.

 

Dimensions

Types of pedestal bearings

Shape

Mounting method

Features

T-shape (extruded)

Pedestal bearing extruded - pedestal bearing housing T-shape - bearing housing with retaining ring - bearing housing corners rounded - bearing with housing

- economically extruded housing
- up to 30% less expensive than milled housings
- higher security thanks to rounded corners

T-shape

Pedestal bearing T-shape - bearing housing with retaining ring - pedestal bearing housing corners chamfered - bearing with housing

- stable despite its narrow design
- available for high positioning accuracy with groove
- optionally with lubricant for low particle formation

L-shape

Bearing housing L-shape - pedestal bearing narrow - bearing housing with retaining ring - bearing with housing

- Low width

Block shape (internal thread)

Bearing housing block shape with female thread - pedestal bearing bottom mounting - bearing block with female thread - bearing with housing

- Fastened from underneath through the internal thread
- Compact design for limited installation space

Block shape

Bearing housing block shape with through hole - pedestal bearing with through hole - bearing block with hole - pedestal bearing housing block shape - bearing with housing

- Low assembly height

Straight

Bearing housing straight - bearing housing side mounting - bearing housing with cross hole - bearing housing end assembly - bearing with housing

- Fastening from the front
- Compact design for limited installation space
- Offset design with height accuracy +/- 0.02 mm

Table – Application of pedestal bearings


Flange bearing designs

Ball bearing

Design

utilisation

Easy

Small diameter flange bearing - flange bearing housing with counterbore - flange bearing flat - bearing housing round - flange bearing

- Can be used at several shaft positions
- Space-saving version available with small diameter

With centering collar
Flange bearing with centering collar - flange bearing housings with centering - flange bearing with collar - flange bearing

- Often used to secure multiple locations
- The centering collar can be used for positioning

Double

Heavy duty Flange bearing housing - double flange bearing - two-ball bearings - flange bearing

- Suitable for heavy loads
- Additional support of the shaft
- Length freely selectable

With centering collar
Flange bearing housing double with centering collar - flange bearing with centering - flange bearing with two ball bearings - flange bearing

- Suitable for heavy loads
- The centering collar can be used for positioning
- Length freely selectable

Table – Flange Bearing Application

 

Instructions for Use / Installation Information - Bearings with Housing

 

Installation Information

When assembling bearing housings, care must be taken to ensure that they are installed without tension to prevent vibration, noise and damage. The holes or threads on the mounting surface should therefore be positioned as accurately as possible to prevent stresses on the shaft or spindle. In addition, dowel pins in the base plate can be a helpful option. Also, when installing the bearing housings, make sure that the contact surfaces are clean.
In addition, MISUMI offers special types of bearing housings, which have a positioning groove on the underside to predetermine a precise alignment.


Bearing housing assembly with dowel pin - bearing housing assembly with keyway - pedestal bearing positioning - pedestal bearing housing assembly

Application example – pedestal bearing mounting with dowel pin, pedestal bearing mounting with keyway, (1) dowel pin

The alteration [NA] allows for the bearing housings and ball bearings not to be delivered pre-assembled. This can significantly simplify assembly depending on the assembly procedure.
In some variants with angular contact bearings, the bearings must be greased during assembly.
 

Flange bearing housing with female thread

MISUMI offers another special form with the flange bearing with female thread. This flange bearing has the advantage that it can be mounted from the front and the rear. This flange bearing housing provides high mounting flexibility and the ability to standardize and reduce the variety of bearing housings.


Female threaded bearing housing - flange-type female threaded bearing housing - flange-type and female threaded bearing

Application example – (1) Flange bearing housing assembly with female thread, (2) flange bearing housing mounting with counterbore


Bearing housing for axial load

If high axial forces occur, MISUMI offers a special form of flange bearings in the combination of needle bearings for radial forces and axial ball bearings for axial forces.


Flange bearing housing with axial ball bearings - flange bearings with needle bearings and axial bearing - flange bearing

Application example – (1) bearing housing with needle bearing and BGCT axial ball bearing, (F) load direction


Maintenance

For bearing housings, the installed bearing can be replaced after the service life has been reached. If the bearings are pressed into the bearing housing, it is recommended to replace the bearing together with the housing. The bearing number installed in the MISUMI bearing housing is discernible from the article number of the bearing unit.
Further information about the various application of bearings can be found under the tab More Information.
Note : After determining the bearing number, you can enter it in the search window to determine the load values and specifications of the bearing for the calculation.
 

Application examples

Application example - flange bearing housing with angular ball bearing - flange bearing with three ball bearings - fixed bearing - bearing with housing

Application example of a flange bearing housing
(1) Collar, (2) Bearing lock nut, (3) Deep groove ball bearing, (4) Housing, (5) Rotary shaft, (6) O-ring, (7) Angular ball bearing, (8) Collar
 


Application example - pedestal bearing housing with conveyor belt - pedestal bearing for conveyor belt - bearing with housing

Application example of a pedestal bearing with conveyor belt
(1) Pedestal bearing, (2) Rotary shaft, (3) Conveyor belt, (4) Idler for flat belts, (5) Collar
 



Application example - bearing housing front mount - bearing housing straight - bearing housing with cross hole - bearing with housing

Application example of a bearing housing
(1) Bearing housing, (2) Metal washer, (3) Screw, (4) Mounting plate, (5) Nut



Application example - Flange bearing housing with clamping ring - Flange bearing with adjusting ring - Flange bearing - Flange bearing with two ball bearings

Application example of a flange bearing housing with clamping ring
(1) Flange bearing, (2) Clamping ring

 

Supplementary Article

 

Rotary shafts

Rotary axes - rotary shafts - assortment

 

Drive shafts

Drive shafts - motor shafts - assortment

 

Bearing Lock Nuts

Shaft nuts - groove nuts - assortment

 

Washers / Collars (Metal)

Metal discs - sleeves - assortment

 

Screws

Screws - threaded screws - shoulder screws - collar screws - countersunk screws - hexagon screws - cylinder head screws - assortment

 

Industrial Applications

 

3D printer industry
Automotive industry
Pharmaceutical industry
Packaging industry

 

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. Next >>
Part Number
S-BGHFS6000ZZ-[20-50/1]
S-BGHFS6001ZZ-[20-50/1]
S-BGHFS6002ZZ-[25-60/1]
S-BGHFS6003ZZ-[25-60/1]
S-BGHFS6004ZZ-[30-80/1]
S-BGHFS606ZZ-[15-40/1]
S-BGHFS608ZZ-[15-40/1]
S-BGHFS6200ZZ-[20-50/1]
S-BGHFS6201ZZ-[20-50/1]
S-BGHFS6202ZZ-[25-60/1]
S-BGHFS6203ZZ-[25-60/1]
S-BGHFS6204ZZ-[30-80/1]
S-BGHFS626ZZ-[15-40/1]
S-BGHFS628ZZ-[15-40/1]
S-BGHFS6900ZZ-[15-50/1]
S-BGHFS6901ZZ-[20-50/1]
S-BGHFS6902ZZ-[20-60/1]
S-BGHFS6903ZZ-[25-60/1]
S-BGHFS6904ZZ-[30-80/1]
S-BGHFSA6000ZZ-[20-50/1]
S-BGHFSA6001ZZ-[20-50/1]
S-BGHFSA6002ZZ-[25-60/1]
S-BGHFSA6003ZZ-[25-60/1]
S-BGHFSA6004ZZ-[30-80/1]
S-BGHFSA606ZZ-[15-40/1]
S-BGHFSA608ZZ-[15-40/1]
S-BGHFSA6200ZZ-[20-50/1]
S-BGHFSA6201ZZ-[20-50/1]
S-BGHFSA6202ZZ-[25-60/1]
S-BGHFSA6203ZZ-[25-60/1]
S-BGHFSA6204ZZ-[30-80/1]
S-BGHFSA626ZZ-[15-40/1]
S-BGHFSA628ZZ-[15-40/1]
S-BGHFSA6900ZZ-[15-50/1]
S-BGHFSA6901ZZ-[20-50/1]
S-BGHFSA6902ZZ-[20-60/1]
S-BGHFSA6903ZZ-[25-60/1]
S-BGHFSA6904ZZ-[30-80/1]
S-BGHKS6000ZZ-[20,​30,​40]
S-BGHKS6001ZZ-[20,​30,​40]
S-BGHKS6002ZZ-[30,​40,​50]
S-BGHKS6003ZZ-[30,​40,​50]
S-BGHKS6004ZZ-[40,​50,​60]
S-BGHKS606ZZ-[20,​25,​30]
S-BGHKS608ZZ-[20,​25,​30]
S-BGHKS6200ZZ-[20,​30,​40]
S-BGHKS6201ZZ-[20,​30,​40]
S-BGHKS6202ZZ-[30,​40,​50]
S-BGHKS6203ZZ-[30,​40,​50]
S-BGHKS6204ZZ-[40,​50,​60]
S-BGHKS626ZZ-[20,​25,​30]
S-BGHKS628ZZ-[20,​25,​30]
S-BGHKS6900ZZ-[20,​30,​40]
S-BGHKS6901ZZ-[20,​30,​40]
S-BGHKS6902ZZ-[30,​40,​50]
S-BGHKS6903ZZ-[30,​40,​50]
S-BGHKS6904ZZ-[40,​50,​60]
S-BGHKSA6000ZZ-[20,​30,​40]
S-BGHKSA6001ZZ-[20,​30,​40]
S-BGHKSA6002ZZ-[30,​40,​50]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSBearing I.D. d
(mm) 		Holder Material Thickness T
(mm) 		Holder Surface Treatment Height h
(mm) 		Bearing Part Number Holder Width L
(mm) 		Height Indication

-

1 7 Days 1010EN 1.4301 Equiv.15Not Provided20 ～ 50600058Height Configurable

-

1 7 Days 1012EN 1.4301 Equiv.15Not Provided20 ～ 50600160Height Configurable

-

1 7 Days 1015EN 1.4301 Equiv.15Not Provided25 ～ 60600268Height Configurable

-

1 7 Days 1017EN 1.4301 Equiv.16Not Provided25 ～ 60600370Height Configurable

-

1 7 Days 1020EN 1.4301 Equiv.19Not Provided30 ～ 80600482Height Configurable

-

1 8 Days 106EN 1.4301 Equiv.12Not Provided15 ～ 4060647Height Configurable

-

1 7 Days 108EN 1.4301 Equiv.12Not Provided15 ～ 4060853Height Configurable

-

1 7 Days 1010EN 1.4301 Equiv.15Not Provided20 ～ 50620062Height Configurable

-

1 7 Days 1012EN 1.4301 Equiv.16Not Provided20 ～ 50620164Height Configurable

-

1 7 Days 1015EN 1.4301 Equiv.16Not Provided25 ～ 60620272Height Configurable

-

1 7 Days 1017EN 1.4301 Equiv.19Not Provided25 ～ 60620376Height Configurable

-

1 7 Days 1020EN 1.4301 Equiv.19Not Provided30 ～ 80620488Height Configurable

-

1 7 Days 106EN 1.4301 Equiv.12Not Provided15 ～ 4062649Height Configurable

-

1 7 Days 108EN 1.4301 Equiv.15Not Provided15 ～ 4062856Height Configurable

-

1 7 Days 1010EN 1.4301 Equiv.12Not Provided15 ～ 50690053Height Configurable

-

1 7 Days 1012EN 1.4301 Equiv.12Not Provided20 ～ 50690156Height Configurable

-

1 8 Days 1015EN 1.4301 Equiv.12Not Provided20 ～ 60690260Height Configurable

-

1 7 Days 1017EN 1.4301 Equiv.13Not Provided25 ～ 60690364Height Configurable

-

1 7 Days 1020EN 1.4301 Equiv.15Not Provided30 ～ 80690473Height Configurable

-

1 7 Days 1010[EN AW-2017 Equiv.] EN AW-2017 Equiv.15Clear Anodize20 ～ 50600058Height Configurable

-

1 7 Days 1012[EN AW-2017 Equiv.] EN AW-2017 Equiv.15Clear Anodize20 ～ 50600160Height Configurable

-

1 7 Days 1015[EN AW-2017 Equiv.] EN AW-2017 Equiv.15Clear Anodize25 ～ 60600268Height Configurable

-

1 7 Days 1017[EN AW-2017 Equiv.] EN AW-2017 Equiv.16Clear Anodize25 ～ 60600370Height Configurable

-

1 7 Days 1020[EN AW-2017 Equiv.] EN AW-2017 Equiv.19Clear Anodize30 ～ 80600482Height Configurable

-

1 8 Days 106[EN AW-2017 Equiv.] EN AW-2017 Equiv.12Clear Anodize15 ～ 4060647Height Configurable

-

1 7 Days 108[EN AW-2017 Equiv.] EN AW-2017 Equiv.12Clear Anodize15 ～ 4060853Height Configurable

-

1 7 Days 1010[EN AW-2017 Equiv.] EN AW-2017 Equiv.15Clear Anodize20 ～ 50620062Height Configurable

-

1 7 Days 1012[EN AW-2017 Equiv.] EN AW-2017 Equiv.16Clear Anodize20 ～ 50620164Height Configurable

-

1 7 Days 1015[EN AW-2017 Equiv.] EN AW-2017 Equiv.16Clear Anodize25 ～ 60620272Height Configurable

-

1 7 Days 1017[EN AW-2017 Equiv.] EN AW-2017 Equiv.19Clear Anodize25 ～ 60620376Height Configurable

-

1 7 Days 1020[EN AW-2017 Equiv.] EN AW-2017 Equiv.19Clear Anodize30 ～ 80620488Height Configurable

-

1 7 Days 106[EN AW-2017 Equiv.] EN AW-2017 Equiv.12Clear Anodize15 ～ 4062649Height Configurable

-

1 7 Days 108[EN AW-2017 Equiv.] EN AW-2017 Equiv.15Clear Anodize15 ～ 4062856Height Configurable

-

1 7 Days 1010[EN AW-2017 Equiv.] EN AW-2017 Equiv.12Clear Anodize15 ～ 50690053Height Configurable

-

1 7 Days 1012[EN AW-2017 Equiv.] EN AW-2017 Equiv.12Clear Anodize20 ～ 50690156Height Configurable

-

1 8 Days 1015[EN AW-2017 Equiv.] EN AW-2017 Equiv.12Clear Anodize20 ～ 60690260Height Configurable

-

1 7 Days 1017[EN AW-2017 Equiv.] EN AW-2017 Equiv.13Clear Anodize25 ～ 60690364Height Configurable

-

1 7 Days 1020[EN AW-2017 Equiv.] EN AW-2017 Equiv.15Clear Anodize30 ～ 80690473Height Configurable

-

1 7 Days 1010EN 1.4301 Equiv.15Not Provided20 ～ 40600058Height Selection

-

1 7 Days 1012EN 1.4301 Equiv.15Not Provided20 ～ 40600160Height Selection

-

1 7 Days 1015EN 1.4301 Equiv.15Not Provided30 ～ 50600268Height Selection

-

1 7 Days 1017EN 1.4301 Equiv.16Not Provided30 ～ 50600370Height Selection

-

1 7 Days 1020EN 1.4301 Equiv.19Not Provided40 ～ 60600482Height Selection

-

1 8 Days 106EN 1.4301 Equiv.12Not Provided20 ～ 3060647Height Selection

-

1 7 Days 108EN 1.4301 Equiv.12Not Provided20 ～ 3060853Height Selection

-

1 7 Days 1010EN 1.4301 Equiv.15Not Provided20 ～ 40620062Height Selection

-

1 7 Days 1012EN 1.4301 Equiv.16Not Provided20 ～ 40620164Height Selection

-

1 7 Days 1015EN 1.4301 Equiv.16Not Provided30 ～ 50620272Height Selection

-

1 7 Days 1017EN 1.4301 Equiv.19Not Provided30 ～ 50620376Height Selection

-

1 7 Days 1020EN 1.4301 Equiv.19Not Provided40 ～ 60620488Height Selection

-

1 7 Days 106EN 1.4301 Equiv.12Not Provided20 ～ 3062649Height Selection

-

1 7 Days 108EN 1.4301 Equiv.15Not Provided20 ～ 3062856Height Selection

-

1 7 Days 1010EN 1.4301 Equiv.12Not Provided20 ～ 40690053Height Selection

-

1 7 Days 1012EN 1.4301 Equiv.12Not Provided20 ～ 40690156Height Selection

-

1 8 Days 1015EN 1.4301 Equiv.12Not Provided30 ～ 50690260Height Selection

-

1 7 Days 1017EN 1.4301 Equiv.13Not Provided30 ～ 50690364Height Selection

-

1 7 Days 1020EN 1.4301 Equiv.15Not Provided40 ～ 60690473Height Selection

-

1 8 Days 1010[EN AW-2017 Equiv.] EN AW-2017 Equiv.15Clear Anodize20 ～ 40600058Height Selection

-

1 7 Days 1012[EN AW-2017 Equiv.] EN AW-2017 Equiv.15Clear Anodize20 ～ 40600160Height Selection

-

1 7 Days 1015[EN AW-2017 Equiv.] EN AW-2017 Equiv.15Clear Anodize30 ～ 50600268Height Selection

Loading...

  1. 1
  2. 2
  3. Next >>

Back to the Category Bearings with Housing

Technical Drawing - Bearings with Housing

Low Dust Raise Greased/T-Shaped/Retained:Related Image
Specification Tables - Bearings with Housing

 

Part NumberhdDH7 dhBHLL1L2TSd1Unit Price
TypeBearing No.SelectableConfigurable 1mm Incrementh Selectableh Configurable
ToleranceS-BGHKSAS-BGHKSS-BGHFSAS-BGHFS
h Selectable
S-BGHKSA
S-BGHKS

h Configurable
S-BGHFSA
S-BGHFS		606ZZ20 25 3015~30617+ 0.018
0		136h+1347352312105.5    
626ZZ19+ 0.021
0		15h+14493725    
608ZZ822187h+15534129    
628ZZ24208h+1656443215    
6900ZZ20 30 4015~401022196h+1553412912    
6000ZZ 
• Low Dust Generation Bearings >>P.1009
 
Alterations - Bearings with Housing


Low Dust Raise Greased/T-Shaped/Retained:Related Image

 

Basic information

Shape T-Shaped Bearing Used Deep Groove Ball Bearings Bearing Material Stainless Steel
Number of Bearings Single Retaining Ring Provided Type Bearings with Housings
Seals ZZ (Double Shield)

Configure

Clear all

76Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Bearing I.D. d(mm)

    • 6
    • 8
    • 10
    • 12
    • 15
    • 17
    • 20

    Clear

  • Holder Material

    • EN 1.4301 Equiv.
    • EN AW-2017 Equiv.
      • EN AW-2017 Equiv.

    Clear

  • Thickness T(mm)

    • 12
    • 13
    • 15
    • 16
    • 19

    Clear

  • Holder Surface Treatment

    • Clear Anodize
    • Not Provided

    Clear

  • Height h(mm)

    • 20
    • 25
    • 30
    • 40
    • 50
    • 60

     [15-80/1mm Unit(s)]

    Clear

  • Bearing Part Number

    • 606
    • 608
    • 626
    • 628
    • 6000
    • 6001
    • 6002
    • 6003
    • 6004
    • 6200
    • 6201
    • 6202
    • 6203
    • 6204
    • 6900
    • 6901
    • 6902
    • 6903
    • 6904

    Clear

  • Holder Width L(mm)

    • 47
    • 49
    • 53
    • 56
    • 58
    • 60
    • 62
    • 64
    • 68
    • 70
    • 72
    • 73
    • 76
    • 82
    • 88

    Clear

  • Height Indication

    • Height Configurable
    • Height Selection

    Clear

  • Type

    • S-BGHFS
    • S-BGHFSA
    • S-BGHKS
    • S-BGHKSA

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 7 Days or Less
    • 8 Days or Less

    Reset

Optional Attributes

Complementary Products

MISUMI Unit еxample related to this product

Search for оther еxamples

back next

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Payment Method

  • Payment on account
  • Pre Payment
  • PayPal

On-Demand Manufacturing

Change View

Certificates

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI worldwide

Social Media

Legal notice

Copyright © MISUMI Corporation All Rights Reserved.