Bearing housings / stepped round flange / counterbore / screwed / deep groove ball bearing, double angular contact ball bearing / steel / black oxided, nickel-plated

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Back to the Category Bearings with Housing

Technical Drawing - Bearings with Housing

Available dimensions and tolerances can be found under the tab More information.
 

Basic Properties (e.g., material, hardness, coating, tolerance) - Bearings with Housing
 
Type Angular Contact Bearings
(Back-to-Back Combination)
Housing, Inner Ring Spacer, Standard Cover
Standard / Oil Seal / O-Ring Cover
Inner Ring Collar
Cover Mounting Screw
Deep Groove Ball Bearings
MaterialMaterialSurface TreatmentMaterialSurface Treatment
ABGYBEN 1.3505 Equiv.EN 1.1191 Equiv.Black OxideEN 1.7220 Equiv.Black Oxide
ABGYElectroless Nickel PlatingEN 1.4301 Equiv.-
The Angular Contact Bearings with Housing is delivered with the parts unassembled to the holder body.
Make sure that bearing outer rings and inner rings are firmly fixed by the covers and bearing nuts before use. 1mm axial clearance is designed on each side of the deep groove bearing outer ring where the inner ring can be tightened without adjusting the length of the inner ring spacer.
A standard cover is included with the deep groove ball bearing side as a standard accessory.
 For Angular Contact Bearings , please select N Standard Covers, S Oil Seal Covers or R O-Ring Covers.
Contact with O-Ring may generate some friction.

Further specifications can be found under the tab More information.
Information about tolerances can be found under ball bearing table / tolerances as PDF

 

Composition of a Product Code - Bearings with Housing
 
Part Number-Cover-L
 
Type Bearing
ABGY 7004-R-100

Note: the bearing number used is included in the bearing housing part number.
 

General Information - Bearings with Housing

 

Bearing housing assortment - flange bearing - pedestal bearing T-shape - pedestal bearing L-shape - flange bearing housing - bearing housing straight - bearing with housing

 

Bearings with Housing/Bearing Housings/Bearing Units Selection Details

- Housing material: aluminum, steel, stainless steel

- Coatings: uncoated, burnished, anodized, nickel-plated

- Ball bearing material: steel, stainless steel

- ISO tolerances: Ball bearing table/tolerances available as PDF

- bearing housing types: round flange, square flange, compact flange, guide flange, T-shape, L-shape, block shape

- Ball bearing types: deep groove ball bearings, angular ball bearings

- Inner diameter: from 3 mm to 50 mm

 

The variety of bearing housings can be found in the Overview of the Types of Pedestal Bearings available as a PDF.

The different designs of the flange bearings can be found in the Overview of the Types of Flange Bearing Housing available as PDF.

 

Description/Basics

Bearing housings are highly robust and allow for easy and quick assembly. They are used to accommodate rotating machine elements in mechanical engineering. The housing bearings are generally provided for receiving rotary shafts or torsional shafts. Bearing housing types include pedestal bearings, flange bearings, tension bearings, and pillow blocks. They can be fitted with simple ball bearings. However, there are bearing housings in which angular contact ball bearings are installed that can also absorb axial forces. Housing bearings are available with single-row, double-row and three-row deep-groove ball bearings or angular contact ball bearings. The different designs of the bearing housings can be used horizontally or vertically. For horizontal mounting, MISUMI offers bearing housings as a vertical pedestal bearing in L- and T-shape, as well as a square bearing block. Flange bearing housings, also called flange bearings, are often used for vertical mounting. A bearing unit from MISUMI, whether a pedestal bearing or a flange bearing, is available in double or triple bearings (with rolling bearings) to absorb any lever forces.
The ball bearings are secured in the bearing housings with retaining rings or bearing covers. The bearing can thus be replaced as needed.

 

Two-row and multi-row bearing housings

Multi-row bearing housings are well-suited for applications subjected to lever forces. They can contribute to increased rotational stability as a flange bearing housing or a pedestal bearing housing.
The flange bearing with angular ball bearing and screwed bearing cover can be used as a fixed bearing. In this case, a floating bearing is recommended in the assembly group.
The combination of fixed and floating bearings can ensure length compensation. This prevents an undesirable compression of a shaft or a threaded drive. A compression can create an imbalance and thus vibrations in an application and lead to inaccuracy


Example of double row flange bearing - three row flange bearing - flange bearing housing with grooved ball bearing - flange bearing housing with angular ball bearing - bearing with housing

Example – multi-row bearing housing – (1) deep groove ball bearing, (2) flange bearing housing, (3) bearing cover, (4) bearing cover screw, (5) angular ball bearing, (6) spacer sleeve, (7) spacer sleeve for inner ring

 

Ball bearing seals for bearing housings

ZZ (2Z): double encapsulated
VV (2RZ): contactless rubber seal
DD (2RS): contact rubber seal (slightly increased friction)

 

Areas of Application

MISUMI’s bearing housings, flange bearings and pedestal bearings can be used in almost all applications. Bearing housings are often used as flange bearings or pedestal bearings for the bearing of ball screws and rotary shafts. In addition, they are often found in conveyor belts, or in the bearings of shafts in timing belts, as well as chain transmission. As a fixed and floating bearing, the bearing units can withstand high loads and speeds of rotation. In addition, the encapsulated or sealed bearings are protected from external influences.

 

Materials

Bearing unit housings are available in steel, stainless steel, and aluminum. Due to the alterations of selecting the ball bearings, a pedestal bearing housing or flange bearing housing can consist of various types of materials. The bearing housings are optionally installed with steel or stainless steel ball bearings. In addition, a bearing housing that can be used as a fixed bearing can additionally be provided on the bearing housing with a rubber seal.

 

Coatings

MISUMI’s pedestal bearings and flange bearings made of steel can be optionally burnished, painted, chemically nickel-plated. The aluminum bearing housings can be anodized to provide the best possible protection against corrosion depending on the need or the environmental conditions.

 

Dimensions

Types of pedestal bearings

Shape

Mounting method

Features

T-shape (extruded)

Pedestal bearing extruded - pedestal bearing housing T-shape - bearing housing with retaining ring - bearing housing corners rounded - bearing with housing

- economically extruded housing
- up to 30% less expensive than milled housings
- higher security thanks to rounded corners

T-shape

Pedestal bearing T-shape - bearing housing with retaining ring - pedestal bearing housing corners chamfered - bearing with housing

- stable despite its narrow design
- available for high positioning accuracy with groove
- optionally with lubricant for low particle formation

L-shape

Bearing housing L-shape - pedestal bearing narrow - bearing housing with retaining ring - bearing with housing

- Low width

Block shape (internal thread)

Bearing housing block shape with female thread - pedestal bearing bottom mounting - bearing block with female thread - bearing with housing

- Fastened from underneath through the internal thread
- Compact design for limited installation space

Block shape

Bearing housing block shape with through hole - pedestal bearing with through hole - bearing block with hole - pedestal bearing housing block shape - bearing with housing

- Low assembly height

Straight

Bearing housing straight - bearing housing side mounting - bearing housing with cross hole - bearing housing end assembly - bearing with housing

- Fastening from the front
- Compact design for limited installation space
- Offset design with height accuracy +/- 0.02 mm

Table – Application of pedestal bearings


Flange bearing designs

Ball bearing

Design

utilisation

Easy

Small diameter flange bearing - flange bearing housing with counterbore - flange bearing flat - bearing housing round - flange bearing

- Can be used at several shaft positions
- Space-saving version available with small diameter

With centering collar
Flange bearing with centering collar - flange bearing housings with centering - flange bearing with collar - flange bearing

- Often used to secure multiple locations
- The centering collar can be used for positioning

Double

Heavy duty Flange bearing housing - double flange bearing - two-ball bearings - flange bearing

- Suitable for heavy loads
- Additional support of the shaft
- Length freely selectable

With centering collar
Flange bearing housing double with centering collar - flange bearing with centering - flange bearing with two ball bearings - flange bearing

- Suitable for heavy loads
- The centering collar can be used for positioning
- Length freely selectable

Table – Flange Bearing Application

 

Instructions for Use / Installation Information - Bearings with Housing

 

Installation Information

When assembling bearing housings, care must be taken to ensure that they are installed without tension to prevent vibration, noise and damage. The holes or threads on the mounting surface should therefore be positioned as accurately as possible to prevent stresses on the shaft or spindle. In addition, dowel pins in the base plate can be a helpful option. Also, when installing the bearing housings, make sure that the contact surfaces are clean.
In addition, MISUMI offers special types of bearing housings, which have a positioning groove on the underside to predetermine a precise alignment.


Bearing housing assembly with dowel pin - bearing housing assembly with keyway - pedestal bearing positioning - pedestal bearing housing assembly

Application example – pedestal bearing mounting with dowel pin, pedestal bearing mounting with keyway, (1) dowel pin

The alteration [NA] allows for the bearing housings and ball bearings not to be delivered pre-assembled. This can significantly simplify assembly depending on the assembly procedure.
In some variants with angular contact bearings, the bearings must be greased during assembly.
 

Flange bearing housing with female thread

MISUMI offers another special form with the flange bearing with female thread. This flange bearing has the advantage that it can be mounted from the front and the rear. This flange bearing housing provides high mounting flexibility and the ability to standardize and reduce the variety of bearing housings.


Female threaded bearing housing - flange-type female threaded bearing housing - flange-type and female threaded bearing

Application example – (1) Flange bearing housing assembly with female thread, (2) flange bearing housing mounting with counterbore


Bearing housing for axial load

If high axial forces occur, MISUMI offers a special form of flange bearings in the combination of needle bearings for radial forces and axial ball bearings for axial forces.


Flange bearing housing with axial ball bearings - flange bearings with needle bearings and axial bearing - flange bearing

Application example – (1) bearing housing with needle bearing and BGCT axial ball bearing, (F) load direction


Maintenance

For bearing housings, the installed bearing can be replaced after the service life has been reached. If the bearings are pressed into the bearing housing, it is recommended to replace the bearing together with the housing. The bearing number installed in the MISUMI bearing housing is discernible from the article number of the bearing unit.
Further information about the various application of bearings can be found under the tab More Information.
Note : After determining the bearing number, you can enter it in the search window to determine the load values and specifications of the bearing for the calculation.
 

Application examples

Application example - flange bearing housing with angular ball bearing - flange bearing with three ball bearings - fixed bearing - bearing with housing

Application example of a flange bearing housing
(1) Collar, (2) Bearing lock nut, (3) Deep groove ball bearing, (4) Housing, (5) Rotary shaft, (6) O-ring, (7) Angular ball bearing, (8) Collar
 


Application example - pedestal bearing housing with conveyor belt - pedestal bearing for conveyor belt - bearing with housing

Application example of a pedestal bearing with conveyor belt
(1) Pedestal bearing, (2) Rotary shaft, (3) Conveyor belt, (4) Idler for flat belts, (5) Collar
 



Application example - bearing housing front mount - bearing housing straight - bearing housing with cross hole - bearing with housing

Application example of a bearing housing
(1) Bearing housing, (2) Metal washer, (3) Screw, (4) Mounting plate, (5) Nut



Application example - Flange bearing housing with clamping ring - Flange bearing with adjusting ring - Flange bearing - Flange bearing with two ball bearings

Application example of a flange bearing housing with clamping ring
(1) Flange bearing, (2) Clamping ring

 

Supplementary Article

 

Rotary shafts

Rotary axes - rotary shafts - assortment

 

Drive shafts

Drive shafts - motor shafts - assortment

 

Bearing Lock Nuts

Shaft nuts - groove nuts - assortment

 

Washers / Collars (Metal)

Metal discs - sleeves - assortment

 

Screws

Screws - threaded screws - shoulder screws - collar screws - countersunk screws - hexagon screws - cylinder head screws - assortment

 

Industrial Applications

 

3D printer industry
Automotive industry
Pharmaceutical industry
Packaging industry

 

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...
Part Number
ABGY7002-N-60
ABGY7002-N-75
ABGY7002-R-60
ABGY7002-R-75
ABGY7002-S-60
ABGY7002-S-75
ABGY7003-N-70
ABGY7003-N-85
ABGY7003-R-70
ABGY7003-R-85
ABGY7003-S-70
ABGY7003-S-85
ABGY7004-N-80
ABGY7004-N-100
ABGY7004-R-80
ABGY7004-R-100
ABGY7004-S-80
ABGY7004-S-100
ABGY7005-N-100
ABGY7005-N-125
ABGY7005-R-100
ABGY7005-R-125
ABGY7005-S-100
ABGY7005-S-125
ABGY7006-N-120
ABGY7006-N-150
ABGY7006-R-120
ABGY7006-R-150
ABGY7006-S-120
ABGY7006-S-150
ABGY7007-N-140
ABGY7007-N-175
ABGY7007-R-140
ABGY7007-R-175
ABGY7007-S-140
ABGY7007-S-175
ABGY7008-N-160
ABGY7008-N-200
ABGY7008-R-160
ABGY7008-R-200
ABGY7008-S-160
ABGY7008-S-200
ABGY7009-N-180
ABGY7009-N-225
ABGY7009-R-180
ABGY7009-R-225
ABGY7009-S-180
ABGY7009-S-225
ABGY7010-N-200
ABGY7010-N-250
ABGY7010-R-200
ABGY7010-R-250
ABGY7010-S-200
ABGY7010-S-250
ABGYB7002-N-60
ABGYB7002-N-75
ABGYB7002-R-60
ABGYB7002-R-75
ABGYB7002-S-60
ABGYB7002-S-75
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSBearing I.D. d
(mm)
Thickness T
(mm)
Holder Surface Treatment Bearing Part Number Cover Type Selection Flange Outer Dia. H
(Ø)

564.36 €

1 9 Days 101560Electroless Nickel Plating7002N (Standard Cover)75

578.18 €

1 9 Days 101575Electroless Nickel Plating7002N (Standard Cover)75

573.74 €

1 9 Days 101560Electroless Nickel Plating7002R (for O-Ring)75

587.92 €

1 9 Days 101575Electroless Nickel Plating7002R (for O-Ring)75

568.96 €

1 9 Days 101560Electroless Nickel Plating7002S (for Oil Seal)75

583.16 €

1 9 Days 101575Electroless Nickel Plating7002S (for Oil Seal)75

590.66 €

1 9 Days 101770Electroless Nickel Plating7003N (Standard Cover)75

604.32 €

1 9 Days 101785Electroless Nickel Plating7003N (Standard Cover)75

600.73 €

1 9 Days 101770Electroless Nickel Plating7003R (for O-Ring)75

614.38 €

1 9 Days 101785Electroless Nickel Plating7003R (for O-Ring)75

595.79 €

1 9 Days 101770Electroless Nickel Plating7003S (for Oil Seal)75

609.45 €

1 9 Days 101785Electroless Nickel Plating7003S (for Oil Seal)75

652.14 €

1 9 Days 102080Electroless Nickel Plating7004N (Standard Cover)92

635.07 €

1 9 Days 1020100Electroless Nickel Plating7004N (Standard Cover)92

662.74 €

1 9 Days 102080Electroless Nickel Plating7004R (for O-Ring)92

646.01 €

1 9 Days 1020100Electroless Nickel Plating7004R (for O-Ring)92

657.44 €

1 9 Days 102080Electroless Nickel Plating7004S (for Oil Seal)92

640.53 €

1 9 Days 1020100Electroless Nickel Plating7004S (for Oil Seal)92

679.14 €

1 9 Days 1025100Electroless Nickel Plating7005N (Standard Cover)98

698.28 €

1 9 Days 1025125Electroless Nickel Plating7005N (Standard Cover)98

690.57 €

1 9 Days 1025100Electroless Nickel Plating7005R (for O-Ring)98

710.04 €

1 9 Days 1025125Electroless Nickel Plating7005R (for O-Ring)98

684.77 €

1 9 Days 1025100Electroless Nickel Plating7005S (for Oil Seal)98

704.25 €

1 9 Days 1025125Electroless Nickel Plating7005S (for Oil Seal)98

833.71 €

1 11 Days 1030120Electroless Nickel Plating7006N (Standard Cover)120

888.04 €

1 11 Days 1030150Electroless Nickel Plating7006N (Standard Cover)120

847.91 €

1 11 Days 1030120Electroless Nickel Plating7006R (for O-Ring)120

903.24 €

1 11 Days 1030150Electroless Nickel Plating7006R (for O-Ring)120

840.72 €

1 11 Days 1030120Electroless Nickel Plating7006S (for Oil Seal)120

895.73 €

1 11 Days 1030150Electroless Nickel Plating7006S (for Oil Seal)120

922.87 €

1 11 Days 1035140Electroless Nickel Plating7007N (Standard Cover)126

962.51 €

1 11 Days 1035175Electroless Nickel Plating7007N (Standard Cover)126

1,042.97 €

1 11 Days 1035140Electroless Nickel Plating7007R (for O-Ring)126

1,087.89 €

1 11 Days 1035175Electroless Nickel Plating7007R (for O-Ring)126

1,034.08 €

1 11 Days 1035140Electroless Nickel Plating7007S (for Oil Seal)126

1,078.84 €

1 11 Days 1035175Electroless Nickel Plating7007S (for Oil Seal)126

1,048.10 €

1 11 Days 1040160Electroless Nickel Plating7008N (Standard Cover)140

1,088.91 €

1 11 Days 1040200Electroless Nickel Plating7008N (Standard Cover)140

1,184.05 €

1 11 Days 1040160Electroless Nickel Plating7008R (for O-Ring)140

1,230.51 €

1 11 Days 1040200Electroless Nickel Plating7008R (for O-Ring)140

1,174.30 €

1 11 Days 1040160Electroless Nickel Plating7008S (for Oil Seal)140

1,220.26 €

1 11 Days 1040200Electroless Nickel Plating7008S (for Oil Seal)140

1,147.32 €

1 11 Days 1045180Electroless Nickel Plating7009N (Standard Cover)145

1,203.01 €

1 11 Days 1045225Electroless Nickel Plating7009N (Standard Cover)145

1,166.45 €

1 11 Days 1045180Electroless Nickel Plating7009R (for O-Ring)145

1,223.15 €

1 11 Days 1045225Electroless Nickel Plating7009R (for O-Ring)145

1,156.89 €

1 11 Days 1045180Electroless Nickel Plating7009S (for Oil Seal)145

1,213.08 €

1 11 Days 1045225Electroless Nickel Plating7009S (for Oil Seal)145

1,246.22 €

1 11 Days 1050200Electroless Nickel Plating7010N (Standard Cover)147

1,305.67 €

1 11 Days 1050250Electroless Nickel Plating7010N (Standard Cover)147

1,267.42 €

1 11 Days 1050200Electroless Nickel Plating7010R (for O-Ring)147

1,327.69 €

1 11 Days 1050250Electroless Nickel Plating7010R (for O-Ring)147

1,256.82 €

1 11 Days 1050200Electroless Nickel Plating7010S (for Oil Seal)147

1,316.76 €

1 11 Days 1050250Electroless Nickel Plating7010S (for Oil Seal)147

557.00 €

1 9 Days 101560Black Oxide7002N (Standard Cover)75

568.61 €

1 9 Days 101575Black Oxide7002N (Standard Cover)75

566.07 €

1 9 Days 101560Black Oxide7002R (for O-Ring)75

578.36 €

1 9 Days 101575Black Oxide7002R (for O-Ring)75

561.45 €

1 9 Days 101560Black Oxide7002S (for Oil Seal)75

573.58 €

1 9 Days 101575Black Oxide7002S (for Oil Seal)75

Loading...

Back to the Category Bearings with Housing

Technical Drawing - Bearings with Housing

Specification Tables - Bearings with Housing

 

Part Number Cover SelectionLSdDH7 Bb1b2Deep Groove Ball Bearing No.HD2TdhED1g6 P.C.D.d1d2H1
TypeBearing No.ToleranceTolerance
ABGYB
(Black Oxide)

ABGY
(Electroless Nickel Plating)
7002N
Standard

S
Oil Seal

R
O-Ring
6075101532+ 0.025
0
913206002ZZ754812281850-0.009
-0.025
62116.66.5
7003708517351014226003ZZ31
7004801001520421216266004ZZ925815362260-0.010
-0.029
751498.5
700510012525476005ZZ9863416580
70061201503055+ 0.030
0
1317286006ZZ12078184827809817.51110.5
700714017535621418306007ZZ126845586-0.012
-0.034
106
70081602002040681519326008ZZ1409220603095116
700918022545751620346009ZZ1459869100122
701020025050806010ZZ14710174105124
No. Cover Details Cover Details Cover Mounting Screw
DD2dhT1T2p.c.d.d3d4t2N Standard CoverS Oil Seal CoverR O-Ring Cover
d5S1S2StAccessory
Oil Seal
RaRbRtrAccessory
O-Ring
700232482868406.53.53.12132225G2032524203.20.4P20M3-8
70033531
7004425836794884.54.12635276D2535631254.70.7P25M4-10
7005476341810533140327D304073630P30
7006557848649.55.55.14150426.5D40506.54135P35M5-12
7007628455911724660479D456094640P40
700868926078116.66.1516552D506595145P45M6-12
700975986985567057D557095650P50
70108010174111388617562D6075970607.50.8P60M6-15
 
No. Collar Details Collar Details Inner Ring Spacer Details
O.D.I.D.ThicknessO.D.I.D.ThicknessO.D.I.D.Thickness (ℓ)
700220158.520159.52015L-32
7003171717L-35
700425209.5252010.52520L-41
7005302510.5302511.53025L-41
7006403040304030L-44
7007453511.5453512.54535L-47
7008504050405040L-50
7009554555455545L-53
7010605013.5605014.56050L-54

Basic information

Shape Flanged Pilot Type Bearing Used Angular Contact Bearings, Back-to-Back Combination Bearing Material EN 1.3505 Equiv.
Number of Bearings Double Holder Material EN 1.1191 Equiv. Flange Shape Round Type
Retaining Ring Not Provided Type Angular Contact Bearings with Housings

Complementary Products

MISUMI Unit еxample related to this product

Tech Support

Technical Support
Tel:+49 69 668173-0 / FAX:+49 69 668173-360