Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
● Pulley Shape
Shape A
Shape B
Standard Tooth Profile
[ ! ]
[ ! ]
mm | Nominal | |||
S5M100 | S5M150 | S5M200 | S5M250 | |
A | 11 | 17 | 22 | 27 |
W | 16 | 22 | 27 | 32 |
L | 28 | 34 | 39 | 44 |
dH7 Shaft Bore I.D. | M (Coarse) | Accessory Set Screws |
5 | M3 | M3 × 3 |
6 to 12 | M4 | M4 × 3 |
13 to 17 | M5 | M5 × 4 |
18 to 30 | M6 | M6 × 5 |
31 to 45 | M8 | M8 × 6 |
46 to 70 | M10 | M10 × 8 |
H round hole
P Round Hole + Tap
[ ! ] For A-Shape pulley, the screw holes are
set at around 120° to keep away from peaks.
N New JIS Keyway + Tap
C Old JIS Keyway + Tap
V Stepped Hole
[ ! ] Z - d ≥ 2
[ ! ] 2.0 ≤ J ≤ W-2.0
F Stepped Hole
(Counterbored Hole on the Hub Side)
[ ! ] Applicable to Shape B only
[ ! ] Z - d ≥ 2
[ ! ]2.0 ≤ J ≤ L-2.0
Y Both Ends Stepped Hole
[ ! ] Applicable to Shape A only
[ ! ]Q (R)-Y ≥ 2
[ ! ]S+T ≤ W-3.0
[ ! ]S (T) ≥ 3.0
WB Two-stepped hole
[ ! ] Applicable to Shape A only
[ ! ] Q-R ≥ 2
[ ! ] R-WB ≥ 2
[ ! ] S+T ≤ W-3.0
[ ! ] S (T) ≥ 3.0
Type | Belt Width | [M] Material | [S] Surface Treatment | [A] Accessory Set Screws | ||||
10 mm | 15 mm | 20 mm | 25 mm | Pulley | Flange | |||
S5M100 | S5M150 | S5M200 | S5M250 | |||||
HTPA | ● | ● | ● | ● | Aluminum alloy | Aluminum alloy | Clear Anodize | EN 1.4301 Equiv. |
HTPB | ● | ● | ● | ● | Black Anodize | |||
HTPK | ● | ● | ● | ● | Hard Clear Anodize | |||
HTPN | ● | ● | ● | ● | Electroless nickel plating | |||
HTPT | ● | ● | ● | ● | EN 1.1191 Equiv. | EN 1.0330 Equiv. | — | EN 1.7220 Equiv. (Black Oxide) |
HTPM | ● | ● | ● | ● | Black Oxide Coating | |||
HTPP | ● | ● | ● | ● | Electroless nickel plating | |||
HTPS | ● | ● | ● | ● | EN 1.4301 Equiv. | EN 1.4301 Equiv. | — | EN 1.4301 Equiv. |
N: New JIS (B1301) Keyway Dimensions
| C: Old JIS keyway Dimensions
|
Part number | — | Pulley Shape | — | Shaft Bore Specs.: I.D. | — | Z | — | J | — | Q | — | R | — | S | — | T | |
(Shaft Bore Specs.: H, P, N, C) | HTPA20S5M150 | — | B | — | NK10 | ||||||||||||
(Shaft Bore Specs.: V, F) | HTPA26S5M150 | — | A | — | V10 | — | Z23 | — | J16.0 | ||||||||
(Shaft Bore Specs.: Y, WB) | HTPA40S5M250 | — | A | — | Y17 | — | Q35 | — | R35 | — | S10 | — | T10 |
Part number | Pulley Shape | Pulley Shape | P.D. | O.D | D | F | E | |||||||
Type | Number of Teeth | Type Nominal Width | A | B | ||||||||||
Shaft Bore Specs. | ||||||||||||||
H Round Hole V·Y·WB Stepped Hole | P Round Hole Tapped | N·C Keyway Tapped | H Round Hole V·F Stepped Hole | P Round Hole Tapped | N·C Keyway Tapped | |||||||||
d1 mm increments / Selectable | ||||||||||||||
Aluminum HTPA HTPB HTPK HTPN Steel HTPT HTPM HTPP Stainless Steel HTPS | 14 | S5M100 S5M150 S5M200 S5M250 | A B | 5 to 12 | 5 to 10 | 8·10 | 5 to 10 | 5 to 8 | — | 22.28 | 21.32 | 14 | 26 | 16 |
15 | 5 to 14 | 5 to 11 | 23.87 | 22.91 | 15 | 28 | 18 | |||||||
16 | 5 to 16 | 5 to 12 | 8 to 12 | 5 to 13 | 5 to 10 | 8 | 25.46 | 24.50 | 17 | 32 | 20 | |||
17 | 27.06 | 26.10 | ||||||||||||
18 | 6 to 18 | 6 to 12 | 6 to 15 | 6 to 11 | 8·10 | 28.65 | 27.69 | 19 | 33 | 22 | ||||
19 | 6 to 20 | 6 to 16 | 8 to 16 | 30.24 | 29.28 | 36 | 24 | |||||||
20 | 31.83 | 30.87 | ||||||||||||
21 | 7 to 23 | 7 to 18 | 8 to 18 | 7 to 20 | 7 to 16 | 8 to 12 | 33.42 | 32.46 | 24 | 40 | 27 | |||
22 | 35.01 | 34.05 | ||||||||||||
23 | 7 to 26 | 7 to 20 | 8 to 20 | 7 to 23 | 7 to 17 | 8 to 13 | 36.61 | 35.65 | 27 | 45 | 30 | |||
24 | 38.20 | 37.24 | ||||||||||||
25 | 8 to 15 | 39.79 | 38.83 | |||||||||||
26 | 8 to 31 | 8 to 23 | 8 to 22 | 8 to 27 | 8 to 21 | 8 to 17 | 41.38 | 40.42 | 31 | 48 | 35 | |||
27 | 8 to 24 | 8 to 24 | 8 to 28 | 8 to 22 | 8 to 18 | 42.97 | 42.01 | 32 | ||||||
28 | 44.56 | 43.60 | ||||||||||||
29 | 10 to 32 | 10 to 26 | 10 to 26 | 10 to 29 | 10 to 23 | 10 to 18 | 46.15 | 45.19 | 33 | 52 | 36 | |||
30 | 47.75 | 46.79 | ||||||||||||
31 | 10 to 36 | 10 to 28 | 10 to 28 | 10 to 33 | 10 to 27 | 10 to 22 | 49.34 | 48.38 | 37 | 55 | 40 | |||
32 | 50.93 | 49.97 | ||||||||||||
33 | 52.52 | 51.56 | 58 | |||||||||||
34 | 10 to 41 | 10 to 33 | 10 to 33 | 10 to 36 | 10 to 30 | 10 to 25 | 54.11 | 53.15 | 40 | 61 | 45 | |||
35 | 55.70 | 54.74 | ||||||||||||
36 | 57.30 | 56.34 | ||||||||||||
37 | 10 to 46 | 10 to 38 | 10 to 38 | 10 to 43 | 10 to 35 | 10 to 28 | 58.89 | 57.93 | 47 | 67 | 50 | |||
38 | 60.48 | 59.52 | ||||||||||||
39 | 62.07 | 61.11 | ||||||||||||
40 | 63.66 | 62.70 | ||||||||||||
41 | 12 to 52 | 12 to 40 | 12 to 38 | 12 to 44 | 12 to 36 | 12 to 30 | 65.25 | 64.29 | 48 | 70 | 56 | |||
42 | 66.85 | 65.89 | ||||||||||||
43 | 12 to 54 | 12 to 42 | 12 to 40 | 12 to 46 | 12 to 38 | 12 to 32 | 68.44 | 67.48 | 50 | 74 | 58 | |||
44 | 70.03 | 69.07 | ||||||||||||
45 | 12 to 56 | 12 to 43 | 12 to 40 | 12 to 52 | 12 to 40 | 12 to 36 | 71.62 | 70.66 | 56 | 80 | 60 | |||
46 | 73.21 | 72.25 | ||||||||||||
47 | 74.80 | 73.84 | ||||||||||||
48 | 12 to 59 | 12 to 45 | 12 to 56 | 12 to 45 | 12 to 40 | 76.39 | 75.43 | 60 | 83 | 63 | ||||
49 | 77.99 | 77.03 | ||||||||||||
50 | 12 to 63 | 12 to 50 | 12 to 43 | 12 to 59 | 12 to 47 | 12 to 43 | 79.58 | 78.62 | 63 | 87 | 67 | |||
51 | 81.17 | 80.21 | ||||||||||||
52 | 82.76 | 81.80 | ||||||||||||
53 | 12 to 71 | 12 to 45 | 12 to 66 | 12 to 48 | 12 to 45 | 84.35 | 83.39 | 70 | 95 | 75 | ||||
54 | 85.94 | 84.98 | ||||||||||||
55 | 87.54 | 86.58 | ||||||||||||
56 | 12 to 76 | 12 to 50 | 12 to 71 | 12 to 50 | 12 to 50 | 89.13 | 88.17 | 75 | 99 | 80 | ||||
57 | 90.72 | 89.76 | ||||||||||||
58 | 92.31 | 91.35 | ||||||||||||
59 | 93.90 | 92.94 | ||||||||||||
60 | 95.49 | 94.53 | ||||||||||||
72 | 12 to 85 | 12 to 70 | 12 to 55 | 12 to 80 | 12 to 70 | 12 to 55 | 114.59 | 113.63 | 90 | 119 | 100 | |||
[ ! ]Shaft Bore Dia.6.35 is selectable for Shaft Bore Specs. H, P, V, and F. [NG] Shaft Bore Dia. 9, 51 to 54 are not available for Shaft Bore Spec. N. [NG] Shaft Bore Dia. 8, 11, 13, 14, 17, or 21 to 55 are not available for Shaft Bore Spec. C. |
Part number | — | Pulley Shape | — | Shaft Bore Specs.: I.D. | — | Z | — | J | — | Q | — | R | — | S | — | T | — | (KC90, etc.) | |||||
HTPM60S5M150 | — | A | — | H30 | — | KSC50 |
Alterations | Set Screw Angle Change | No Flange | Single Flange | Flange Cut |
Code | KC90 | NFC | RFC·LFC | FC |
Spec. | Changes an angle of set screw to 90°. [ ! ] For A-Shape pulley, the screw holes are set at around 90° to keep away from peaks. ![]() | (Flange 2 pcs. Included) Ordering Code NFC ![]() | (Flange 1 pc. Included) Ordering Code RFC ![]() | Cut the flange O.D. in 0.5 mm increments. Ordering Code FC17 Application Notes [ ! ]FC ≥ (O.D.) +1 [ ! ]FC ≤ F-2 [ ! ] No surface treatment is applied on flange circumference. ![]() |
Alterations | Retaining Ring Groove | Taper for Bearing Holder | Hub Shortening | Tapped Hole Dimensions | Included Set Screw Length Change | ||||||||||||||||||||||||||||
Code | SRG | BTC | BC | TPC | SLH | ||||||||||||||||||||||||||||
Spec. | Retaining Ring Groove applicable to the shaft dia. of stepped hole is machined. Specify SRG 2.5-24.5 mm ![]() | Taper for retaining bearing inner ring Ordering Code BTC6-TL1.5 ![]() | Cuts the hub length in 0.5 mm increments. Ordering Code BC6.5 Application Notes [!] Shaft Bore Specs. ![]() | Ordering Code TPC5 Application Notes [ ! ] Applicable to Shaft Bore Specs. P, N, C only
| Ordering Code SLH10 Application Notes [ ! ] Applicable to Shaft Bore Specs. P, N, C only
|
Alterations | Add Side Holes [!] Conditions may vary depending on the shaft bore specs. | ||
Side Tapped Hole | Side Through Hole | Side Counterbored | |
Code | QTC·QFC·QSC | KTC·KFC·KSC | ZTC·ZFC·ZSC |
Spec. | Machines tapped hole on the side surface of hub side. Ordering Code QTC28−M4 Q□C Selection Specify the hole position (P. C. D. dim.). M Selection M3, M4, M5, M6, M8 Application Notes [ ! ] Minimum Thickness: 2 mm [!] Conditions may vary depending on the shaft bore specs. ![]() (6 Locations) (4 Locations) (3 Locations) | Machines through hole on the side surface. Ordering Code KTC28−K4.5 K□C Selection Specify the hole position (P. C. D. dim.). Specify K K4.0 to 13.0 (0.5 mm Increments) Application Notes [ ! ] Minimum Thickness: 2 mm [!] Conditions may vary depending on the shaft bore specs. ![]() (6 Locations) (4 Locations) (3 Locations) | Machines counterbored hole on the side surface. Ordering Code ZTC28−ZM4 Z□C Selection Specify the hole position (P. C. D. dim.). ZM Selection ZM3, ZM4, ZM5, ZM6, ZM8 Application Notes [ ! ] Minimum Thickness: 2 mm [!] Conditions may vary depending on the shaft bore specs. ![]() (6 Locations) (4 Locations) (3 Locations) |
3D preview is not available, because the part number has not yet been determined.
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Belt Width (mm) | [T] Number of Teeth | Pulley Shape | Material | Surface Treatment | [Y] Shaft Bore Specification (Both Ends Stepped Hole) (mm) | [N] Shaft Bore Specification (New JIS Keyway Hole + Tap) (mm) | [C] Shaft Bore Specification (Old JIS Keyway Hole + Tap) (mm) | [P] Shaft Bore Specification (Round Hole + Tap) (mm) | [H] Shaft Bore Specification (Round Hole) (mm) | [NK] Shaft Bore Specification (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) (mm) | [V] Shaft Bore Specification (Stepped Hole) (mm) | [F] Shaft Bore Specification (Stepped Hole: Counterbored Holes on the Hub Side) (mm) | [WB] Shaft Bore Specification (Two-Stepped Hole on one side) (mm) | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 6 Days | 10 | 15 | 22 | Shape B | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | - | - | - | - | 7 ~ 17 | - | ||
- | 1 | 6 Days | 10 | 15 | 22 | Shape B | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | - | 7 ~ 19 | - | - | - | - | ||
- | 1 | 6 Days | 10 | 15 | 22 | Shape B | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | 8 ~ 12 | - | - | - | - | - | - | - | ||
- | 1 | 6 Days | 10 | 15 | 22 | Shape B | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | - | - | 10 | - | - | - | ||
- | 1 | 6 Days | 10 | 15 | 22 | Shape B | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | 7 ~ 15 | - | - | - | - | - | ||
- | 1 | 6 Days | 10 | 15 | 22 | Shape B | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | - | - | - | 7 ~ 17 | - | - | ||
- | 1 | 6 Days | 10 | 25 | 22 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | 10 ~ 18 | - | - | - | - | - | - | ||
- | 1 | 6 Days | 10 | 25 | 22 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | - | 7 ~ 19 | - | - | - | - | ||
- | 1 | 6 Days | 10 | 25 | 22 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | 8 | - | - | - | - | - | - | - | ||
- | 1 | 6 Days | 10 | 25 | 22 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | 10 ~ 18 | - | - | - | - | - | - | - | ||
- | 1 | 6 Days | 10 | 25 | 22 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | - | - | 10 | - | - | - | ||
- | 1 | 6 Days | 10 | 25 | 22 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | 7 ~ 18 | - | - | - | - | - | ||
- | 1 | 6 Days | 10 | 25 | 22 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | - | - | - | 7 ~ 17 | - | - | ||
- | 1 | 6 Days | 10 | 25 | 22 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | 7 ~ 17 | - | - | - | - | - | - | - | - | ||
- | 1 | 6 Days | 10 | 25 | 22 | Shape B | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | 10 ~ 12 | - | - | - | - | - | - | ||
- | 1 | 6 Days | 10 | 25 | 22 | Shape B | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | - | - | - | - | 7 ~ 17 | - | ||
- | 1 | 6 Days | 10 | 25 | 22 | Shape B | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | - | 7 ~ 19 | - | - | - | - | ||
- | 1 | 6 Days | 10 | 25 | 22 | Shape B | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | 8 ~ 12 | - | - | - | - | - | - | - | ||
- | 1 | 6 Days | 10 | 25 | 22 | Shape B | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | - | - | 10 | - | - | - | ||
- | 1 | 6 Days | 10 | 25 | 22 | Shape B | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | 7 ~ 15 | - | - | - | - | - | ||
- | 1 | 6 Days | 10 | 25 | 22 | Shape B | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | - | - | - | 7 ~ 17 | - | - | ||
- | 1 | 6 Days | 10 | 10 | 24 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | 10 ~ 20 | - | - | - | - | - | - | ||
- | 1 | 6 Days | 10 | 10 | 24 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | - | 7 ~ 22 | - | - | - | - | ||
- | 1 | 6 Days | 10 | 10 | 24 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | 8 | - | - | - | - | - | - | - | ||
- | 1 | 6 Days | 10 | 10 | 24 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | 10 ~ 20 | - | - | - | - | - | - | - | ||
- | 1 | 6 Days | 10 | 10 | 24 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | - | - | 10 | - | - | - | ||
- | 1 | 6 Days | 10 | 10 | 24 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | 7 ~ 20 | - | - | - | - | - | ||
- | 1 | 6 Days | 10 | 10 | 24 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | - | - | - | 7 ~ 20 | - | - | ||
- | 1 | 6 Days | 10 | 10 | 24 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | 7 ~ 20 | - | - | - | - | - | - | - | - | ||
- | 1 | 6 Days | 10 | 10 | 24 | Shape B | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | 10 ~ 12 | - | - | - | - | - | - | ||
- | 1 | 6 Days | 10 | 10 | 24 | Shape B | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | - | - | - | - | 7 ~ 20 | - | ||
- | 1 | 6 Days | 10 | 10 | 24 | Shape B | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | - | 7 ~ 22 | - | - | - | - | ||
- | 1 | 6 Days | 10 | 10 | 24 | Shape B | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | 8 ~ 13 | - | - | - | - | - | - | - | ||
- | 1 | 6 Days | 10 | 10 | 24 | Shape B | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | - | - | 10 | - | - | - | ||
- | 1 | 6 Days | 10 | 10 | 24 | Shape B | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | 7 ~ 17 | - | - | - | - | - | ||
- | 1 | 6 Days | 10 | 10 | 24 | Shape B | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | - | - | - | 7 ~ 20 | - | - | ||
- | 1 | 6 Days | 10 | 15 | 24 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | 10 ~ 20 | - | - | - | - | - | - | ||
- | 1 | 6 Days | 10 | 15 | 24 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | - | 7 ~ 22 | - | - | - | - | ||
- | 1 | 6 Days | 10 | 15 | 24 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | 8 | - | - | - | - | - | - | - | ||
- | 1 | 6 Days | 10 | 15 | 24 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | 10 ~ 20 | - | - | - | - | - | - | - | ||
- | 1 | 6 Days | 10 | 15 | 24 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | - | - | 10 | - | - | - | ||
- | 1 | 6 Days | 10 | 15 | 24 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | 7 ~ 20 | - | - | - | - | - | ||
- | 1 | 6 Days | 10 | 15 | 24 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | - | - | - | 7 ~ 20 | - | - | ||
- | 1 | 6 Days | 10 | 15 | 24 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | 7 ~ 20 | - | - | - | - | - | - | - | - | ||
- | 1 | 6 Days | 10 | 15 | 24 | Shape B | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | 10 ~ 12 | - | - | - | - | - | - | ||
- | 1 | 6 Days | 10 | 15 | 24 | Shape B | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | - | - | - | - | 7 ~ 20 | - | ||
- | 1 | 6 Days | 10 | 15 | 24 | Shape B | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | - | 7 ~ 22 | - | - | - | - | ||
- | 1 | 6 Days | 10 | 15 | 24 | Shape B | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | 8 ~ 13 | - | - | - | - | - | - | - | ||
- | 1 | 6 Days | 10 | 15 | 24 | Shape B | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | - | - | 10 | - | - | - | ||
- | 1 | 6 Days | 10 | 15 | 24 | Shape B | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | 7 ~ 17 | - | - | - | - | - | ||
- | 1 | 6 Days | 10 | 15 | 24 | Shape B | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | - | - | - | 7 ~ 20 | - | - | ||
- | 1 | 6 Days | 10 | 25 | 24 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | 10 ~ 20 | - | - | - | - | - | - | ||
- | 1 | 6 Days | 10 | 25 | 24 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | - | 7 ~ 22 | - | - | - | - | ||
- | 1 | 6 Days | 10 | 25 | 24 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | 8 | - | - | - | - | - | - | - | ||
- | 1 | 6 Days | 10 | 25 | 24 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | 10 ~ 20 | - | - | - | - | - | - | - | ||
- | 1 | 6 Days | 10 | 25 | 24 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | - | - | 10 | - | - | - | ||
- | 1 | 6 Days | 10 | 25 | 24 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | 7 ~ 20 | - | - | - | - | - | ||
- | 1 | 6 Days | 10 | 25 | 24 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | - | - | - | - | 7 ~ 20 | - | - | ||
- | 1 | 6 Days | 10 | 25 | 24 | Shape A | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | 7 ~ 20 | - | - | - | - | - | - | - | - | ||
- | 1 | 6 Days | 10 | 25 | 24 | Shape B | [Aluminum] 2000 Series Aluminum Alloy (Duralumin) | Clear Anodize | - | - | 10 ~ 12 | - | - | - | - | - | - |
Loading...
Type | Timing Pulleys | Belt Type | S5M | Timing Pulleys/Idlers | Pulleys |
---|
Configure
Basic Attributes
Belt Width(mm)
[T] Number of Teeth
Pulley Shape
Material
Surface Treatment
[Y] Shaft Bore Specification (Both Ends Stepped Hole)(mm)
[N] Shaft Bore Specification (New JIS Keyway Hole + Tap)(mm)
[C] Shaft Bore Specification (Old JIS Keyway Hole + Tap)(mm)
[P] Shaft Bore Specification (Round Hole + Tap)(mm)
[H] Shaft Bore Specification (Round Hole)(mm)
[NK] Shaft Bore Specification (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm)(mm)
[V] Shaft Bore Specification (Stepped Hole)(mm)
[F] Shaft Bore Specification (Stepped Hole: Counterbored Holes on the Hub Side)(mm)
[WB] Shaft Bore Specification (Two-Stepped Hole on one side)(mm)
Type
Filter by CAD data type
Filter by standard shipping days
Optional Attributes