Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
■S8M
● Pulley Shape
Standard Tooth Profile
Shape A
[ ! ]1
[ ! ]2
Shape B
[ ! ]1
[ ! ]2
mm | Nominal | ||||
S8M150 | S8M250 | S8M300 | S8M400 | S8M600 | |
A | 17 | 28 | 33 | 44 | 65 |
W | 22 | 33 | 38 | 49 | 70 |
L (Number of Teeth: 18 to 43) | 37 | 48 | 53 | 64 | 85 |
L (Number of Teeth: 44 to 72) | 42 | 53 | 58 | 69 | 90 |
dH7 Shaft Bore I.D. | M (Coarse) | Accessory Set Screws |
12 | M4 | M4 × 3 |
13 to 17 | M5 | M5 × 4 |
18 to 30 | M6 | M6 × 5 |
31 to 45 | M8 | M8 × 6 |
46 to 70 | M10 | M10 × 8 |
● Shaft Bore Specification Select shaft bore spec mark and each dim. from the table below. [ ! ] Surface treatment may not be applied to the shaft bores.
H round hole | P Round Hole + Tap | N New JIS Keyway + Tap C Old JIS Keyway + Tap |
![]() | ![]() | ![]() |
[ ! ] For A-Shape pulley, the screw holes are |
V Stepped Hole | F Stepped Hole (Counterbored Hole on the Hub Side) | Y Both Ends Stepped Hole | WB Two-stepped hole |
![]() | ![]() | ![]() | ![]() |
[ ! ] Z - d ≥ 2 [ ! ] 3.0 ≤ J ≤ W-3.0 | [ ! ] Applicable to Shape B only [ ! ] Z - d ≥ 2 [ ! ] 3.0 ≤ J ≥ L-3.0 | [ ! ] Applicable to Shape A only [ ! ] Q (R)-Y ≥ 2 [ ! ] S+T ≤ W-3.0 [ ! ] S (T) ≥ 3.0 | [ ! ] Applicable to Shape A only [ ! ] Q-R ≥ 2 [ ! ] R-WB ≥ 2 [ ! ] S+T ≤ W-3.0 [ ! ] S (T) ≥ 3.0 |
Type | Belt Width | [M] Material | [S] Surface Treatment | [A] Accessory Set Screws | |||||
15 mm | 25 mm | 30 mm | 40 mm | 60 mm | Pulley | Flange | |||
S8M150 | S8M250 | S8M300 | S8M400 | S8M600 | |||||
HTPA | ● | ● | ● | ● | ● | Extra Super Duralumin Aluminum alloy | Aluminum alloy | Clear Anodize | EN 1.4301 Equiv. |
HTPB | ● | ● | ● | ● | ● | Black Anodize | |||
HTPK | ● | ● | ● | ● | ● | Hard Clear Anodize | |||
HTPN | ● | ● | ● | ● | ● | Electroless nickel plating | |||
HTPT | ● | ● | ● | ● | ● | EN 1.1191 Equiv. | EN 1.0330 Equiv. | — | EN 1.7220 Equiv. (Black Oxide) |
HTPM | ● | ● | ● | ● | ● | Black Oxide Coating | |||
HTPP | ● | ● | ● | ● | ● | Electroless nickel plating | |||
HTPS | ● | ● | ● | — | — | EN 1.4301 Equiv. | EN 1.4301 Equiv. | — | EN 1.4301 Equiv. |
Part number | — | Pulley Shape | — | Shaft Bore Specs.: I.D. | — | Z | — | J | — | Q | — | R | — | S | — | T | |
(Shaft Bore Specs.: H, P, N, C) | HTPA36S8M250 | — | A | — | H65 | ||||||||||||
(Shaft Bore Specs.: V, F) | HTPA30S8M300 | — | B | — | V20 | — | Z38 | — | J23.0 | ||||||||
(Shaft Bore Specs.: Y, WB) | HTPA40S8M250 | — | A | — | Y30 | — | Q62 | — | R47 | — | S16 | — | T9 |
Part number | Pulley Shape | Pulley Shape | P.D. | O.D | D | F | E | |||||||
Type | Number of Teeth | Type Nominal Width | A | B | ||||||||||
Shaft Bore Specs. | ||||||||||||||
H Round Hole V·Y·WB Stepped Hole | P Round Hole Tapped | N·C Keyway Tapped | H Round Hole V·F Stepped Hole | P Round Hole Tapped | N·C Keyway Tapped | |||||||||
d1 mm increments / Selectable | ||||||||||||||
Aluminum HTPA HTPB HTPK HTPN Steel HTPT HTPM HTPP Stainless Steel HTPS | 18 | S8M150 S8M250 S8M300 S8M400 S8M600 | A B | 12 to 32 | 12 to 26 | 12 to 26 | 12 to 28 | 12 to 22 | 12 to 20 | 45.84 | 44.46 | 32 | 52 | 36 |
19 | 12 to 36 | 12 to 28 | 12 to 28 | 12 to 31 | 12 to 25 | 48.38 | 47.01 | 35 | 55 | 40 | ||||
20 | 12 to 36 | 12 to 30 | 12 to 30 | 12 to 32 | 12 to 26 | 12 to 22 | 50.93 | 49.56 | 36 | 58 | ||||
21 | 12 to 41 | 12 to 32 | 12 to 32 | 12 to 36 | 12 to 30 | 12 to 24 | 53.48 | 52.10 | 40 | 61 | 45 | |||
22 | 12 to 34 | 12 to 34 | 12 to 37 | 12 to 25 | 56.02 | 54.65 | 41 | |||||||
23 | 12 to 46 | 12 to 40 | 12 to 40 | 12 to 42 | 12 to 34 | 12 to 28 | 58.57 | 57.20 | 46 | 67 | 50 | |||
24 | 61.12 | 59.74 | ||||||||||||
25 | 12 to 52 | 12 to 44 | 12 to 36 | 63.66 | 62.29 | 48 | 70 | 56 | ||||||
26 | 14 to 54 | 14 to 45 | 14 to 45 | 14 to 47 | 14 to 39 | 14 to 31 | 66.21 | 64.84 | 51 | 74 | 58 | |||
27 | 14 to 56 | 14 to 48 | 14 to 48 | 14 to 51 | 14 to 43 | 14 to 35 | 68.75 | 67.38 | 55 | 80 | 60 | |||
28 | 71.30 | 69.93 | ||||||||||||
29 | 73.85 | 72.48 | ||||||||||||
30 | 14 to 63 | 14 to 50 | 14 to 50 | 14 to 56 | 14 to 46 | 14 to 38 | 76.39 | 75.02 | 60 | 87 | 67 | |||
31 | 78.94 | 77.57 | ||||||||||||
32 | 14 to 55 | 14 to 55 | 14 to 59 | 14 to 49 | 14 to 45 | 81.49 | 80.12 | 63 | ||||||
33 | 84.03 | 82.66 | ||||||||||||
34 | 16 to 67 | 16 to 60 | 16 to 55 | 16 to 66 | 16 to 56 | 16 to 48 | 86.58 | 85.21 | 70 | 95 | 75 | |||
35 | 89.13 | 87.75 | ||||||||||||
36 | 16 to 72 | 16 to 65 | 16 to 71 | 16 to 61 | 16 to 50 | 91.67 | 90.30 | 75 | 99 | 80 | ||||
37 | 94.22 | 92.85 | ||||||||||||
38 | 16 to 76 | 16 to 76 | 16 to 65 | 96.77 | 95.39 | 80 | 104 | 84 | ||||||
39 | 20 to 80 | 20 to 70 | 20 to 55 | 20 to 80 | 20 to 65 | 20 to 55 | 99.31 | 97.94 | 85 | 111 | 90 | |||
40 | 101.86 | 100.49 | ||||||||||||
41 | 104.41 | 103.03 | ||||||||||||
42 | 106.95 | 105.58 | ||||||||||||
43 | 20 to 85 | 20 to 70 | 109.50 | 108.13 | 90 | 119 | 100 | |||||||
44 | 112.05 | 110.67 | ||||||||||||
45 | 114.59 | 113.22 | 97 | 123 | 102 | |||||||||
46 | 117.14 | 115.77 | ||||||||||||
47 | 119.68 | 118.31 | 100 | 127 | 105 | |||||||||
48 | 122.23 | 120.86 | ||||||||||||
49 | 124.78 | 123.41 | 135 | 115 | ||||||||||
50 | 127.32 | 125.95 | ||||||||||||
51 | 129.87 | 128.50 | ||||||||||||
52 | 132.42 | 131.04 | 140 | 120 | ||||||||||
53 | 134.96 | 133.59 | ||||||||||||
54 | 137.51 | 136.14 | 144 | 125 | ||||||||||
55 | 140.06 | 138.68 | ||||||||||||
56 | 142.60 | 141.23 | 152 | 130 | ||||||||||
57 | 145.15 | 143.78 | ||||||||||||
58 | 147.70 | 146.32 | 160 | 140 | ||||||||||
59 | 150.24 | 148.87 | ||||||||||||
60 | 152.79 | 151.42 | ||||||||||||
72 | 183.35 | 181.97 | 190 | 170 | ||||||||||
[NG]Shaft Bore Dia. 51 to 54 are not available for Shaft Bore Spec. N. [NG]Shaft Bore Dia. 8, 11, 13, 14, 17, or 21 to 55 are not available for Shaft Bore Spec. C. [NG]For S8M600, Shaft Bore Dia. 22 or less are not available for Shaft Bore Specs. N and C. |
Part number | — | Pulley Shape | — | Shaft Bore Specs.: I.D. | — | Z | — | J | — | Q | — | R | — | S | — | T | — | (KC90, etc.) |
HTPA60S8M250 | — | A | — | H65 | — | KSC80−K8 |
Alterations | Set Screw Angle Change | No Flange | Single Flange | Flange Cut |
Code | KC90 | NFC | RFC·LFC | FC |
Spec. | Changes an angle of set screw to 90°. [ ! ] For A-Shape pulley, the screw holes are set at around 90° to keep away from peaks. ![]() | (Flange 2 pcs. Included) Ordering Code NFC ![]() | (Flange 1 pc. Included) Ordering Code RFC ![]() | Cut the flange O.D. in 0.5 mm increments. Ordering Code FC17 Application Notes [ ! ]FC ≥ (O.D.) +1 [ ! ]FC ≤ F−2 [ ! ] No surface treatment is applied on flange circumference. ![]() |
Alterations | Retaining Ring Groove | Taper for Bearing Holder | Hub Shortening | Tapped Hole Dimensions | Included Set Screw Length Change | ||||||||||||||||||||||||
Code | SRG | BTC | BC | TPC | SLH | ||||||||||||||||||||||||
Spec. | Retaining Ring Groove applicable to the shaft dia. of stepped hole is machined. Specify SRG 2.5 to 40.5 mm [ ! ] Applicable to Shaft Bore Specs. V and F only [ ! ] Standards of retaining ring groove for Z dim. is applied [ ! ] n ≤ J−SRG−m Ordering Code SRG7 ![]() | Taper for retaining bearing inner ring Ordering Code BTC15-TL4 Application Notes [ ! ] Applicable to Shape A only [ ! ] Applicable to Shaft Bore Specs. H and P only [ ! ]TL < L−W [ ! ] When E-D ≤ 6, one side installed ![]() | Cuts the hub length in 0.5 mm increments. Ordering Code BC6.5 Application Notes [!] Shaft Bore Specs. H, V, F: [!] Shaft Bore Specs. P, N, C: ![]() | Ordering Code TPC5 Application Notes [ ! ] Applicable to Shaft Bore Specs. P, N, C only
| Ordering Code SLH10 Application Notes [ ! ] Applicable to Shaft Bore Specs. P, N, C only
|
Alterations | Add Side Holes [!] Conditions may vary depending on the shaft bore specs. | ||
Side Tapped Hole | Side Through Hole | Side Counterbored | |
Code | QTC·QFC·QSC | KTC·KFC·KSC | ZTC·ZFC·ZSC |
Spec. | Machines tapped hole on the side surface of hub side. Ordering Code QTC28−M4 Q□C Selection Specify the hole position (P. C. D. dim.). M Selection M3, M4, M5, M6, M8 Application Notes [ ! ] Minimum Thickness: 2 mm [!] Conditions may vary depending on the shaft bore specs. ![]() (6 Locations) (4 Locations) (3 Locations) | Machines through hole on the side surface. Ordering Code KTC28−K4.5 K□C Selection Specify the hole position (P. C. D. dim.). Specify K K4.0 to 13.0 (0.5 mm Increments) Application Notes [ ! ] Minimum Thickness: 2 mm [!] Conditions may vary depending on the shaft bore specs. ![]() (6 Locations) (4 Locations) (3 Locations) | Machines counterbored hole on the side surface. Ordering Code ZTC28−ZM4 Z□C Selection Specify the hole position (P. C. D. dim.). ZM Selection ZM3, ZM4, ZM5, ZM6, ZM8 Application Notes [ ! ] Minimum Thickness: 2 mm [!] Conditions may vary depending on the shaft bore specs. ![]() (6 Locations) (4 Locations) (3 Locations) |
3D preview is not available, because the part number has not yet been determined.
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Belt Width (mm) | [T] Number of Teeth | Pulley Shape | Material | Surface Treatment | [Y] Shaft Bore Specification (Both Ends Stepped Hole) (mm) | [N] Shaft Bore Specification (New JIS Keyway Hole + Tap) (mm) | [C] Shaft Bore Specification (Old JIS Keyway Hole + Tap) (mm) | [P] Shaft Bore Specification (Round Hole + Tap) (mm) | [H] Shaft Bore Specification (Round Hole) (mm) | [V] Shaft Bore Specification (Stepped Hole) (mm) | [F] Shaft Bore Specification (Stepped Hole: Counterbored Holes on the Hub Side) (mm) | [WB] Shaft Bore Specification (Two-Stepped Hole on one side) (mm) | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 8 Days | 10 | 40 | 34 | Shape B | [Aluminum] Aluminum Alloy 7000 series | Clear Anodize | - | - | - | - | - | - | 16 ~ 64 | - | ||
- | 1 | 8 Days | 10 | 40 | 34 | Shape B | [Aluminum] Aluminum Alloy 7000 series | Clear Anodize | - | - | - | - | 16 ~ 66 | - | - | - | ||
- | 1 | 8 Days | 10 | 40 | 34 | Shape B | [Aluminum] Aluminum Alloy 7000 series | Clear Anodize | - | 16 ~ 48 | - | - | - | - | - | - | ||
- | 1 | 8 Days | 10 | 40 | 34 | Shape B | [Aluminum] Aluminum Alloy 7000 series | Clear Anodize | - | - | - | 16 ~ 56 | - | - | - | - | ||
- | 1 | 8 Days | 10 | 40 | 34 | Shape B | [Aluminum] Aluminum Alloy 7000 series | Clear Anodize | - | - | - | - | - | 16 ~ 64 | - | - | ||
- | 1 | 6 Days | - | 60 | 34 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | - | - | - | - | - | 17 ~ 64 | - | ||
- | 1 | 6 Days | - | 60 | 34 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | - | - | - | 17 ~ 66 | - | - | - | ||
- | 1 | 6 Days | - | 60 | 34 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | 23 ~ 48 | - | - | - | - | - | - | ||
- | 1 | 6 Days | - | 60 | 34 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | - | - | 17 ~ 56 | - | - | - | - | ||
- | 1 | 6 Days | - | 60 | 34 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | - | - | - | - | 17 ~ 64 | - | - | ||
- | 1 | 6 Days | - | 15 | 35 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | - | 16 ~ 20 | - | - | - | - | - | ||
- | 1 | 6 Days | - | 15 | 35 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | - | - | - | - | - | 16 ~ 64 | - | ||
- | 1 | 6 Days | - | 15 | 35 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | - | - | - | 16 ~ 66 | - | - | - | ||
- | 1 | 6 Days | - | 15 | 35 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | 16 ~ 48 | - | - | - | - | - | - | ||
- | 1 | 6 Days | - | 15 | 35 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | - | - | 16 ~ 56 | - | - | - | - | ||
- | 1 | 6 Days | - | 15 | 35 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | - | - | - | - | 16 ~ 64 | - | - | ||
- | 1 | 6 Days | - | 25 | 35 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | - | 16 ~ 20 | - | - | - | - | - | ||
- | 1 | 6 Days | - | 25 | 35 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | - | - | - | - | - | 16 ~ 64 | - | ||
- | 1 | 6 Days | - | 25 | 35 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | - | - | - | 16 ~ 66 | - | - | - | ||
- | 1 | 6 Days | - | 25 | 35 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | 16 ~ 48 | - | - | - | - | - | - | ||
- | 1 | 6 Days | - | 25 | 35 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | - | - | 16 ~ 56 | - | - | - | - | ||
- | 1 | 6 Days | - | 25 | 35 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | - | - | - | - | 16 ~ 64 | - | - | ||
- | 1 | 6 Days | - | 30 | 35 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | - | 16 ~ 20 | - | - | - | - | - | ||
- | 1 | 6 Days | - | 30 | 35 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | - | - | - | - | - | 16 ~ 64 | - | ||
- | 1 | 6 Days | - | 30 | 35 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | - | - | - | 16 ~ 66 | - | - | - | ||
- | 1 | 6 Days | - | 30 | 35 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | 16 ~ 48 | - | - | - | - | - | - | ||
- | 1 | 6 Days | - | 30 | 35 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | - | - | 16 ~ 56 | - | - | - | - | ||
- | 1 | 6 Days | - | 30 | 35 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | - | - | - | - | 16 ~ 64 | - | - | ||
- | 1 | 6 Days | - | 40 | 35 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | - | 16 ~ 20 | - | - | - | - | - | ||
- | 1 | 6 Days | - | 40 | 35 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | - | - | - | - | - | 16 ~ 64 | - | ||
- | 1 | 6 Days | - | 40 | 35 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | - | - | - | 16 ~ 66 | - | - | - | ||
- | 1 | 6 Days | - | 40 | 35 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | 16 ~ 48 | - | - | - | - | - | - | ||
- | 1 | 6 Days | - | 40 | 35 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | - | - | 16 ~ 56 | - | - | - | - | ||
- | 1 | 6 Days | - | 40 | 35 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | - | - | - | - | 16 ~ 64 | - | - | ||
- | 1 | 6 Days | - | 60 | 35 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | - | - | - | - | - | 17 ~ 64 | - | ||
- | 1 | 6 Days | - | 60 | 35 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | - | - | - | 17 ~ 66 | - | - | - | ||
- | 1 | 6 Days | - | 60 | 35 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | 23 ~ 48 | - | - | - | - | - | - | ||
- | 1 | 6 Days | - | 60 | 35 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | - | - | 17 ~ 56 | - | - | - | - | ||
- | 1 | 6 Days | - | 60 | 35 | Shape B | [Aluminum] Ultra Super Duralumin Aluminum Alloy | Clear Anodize | - | - | - | - | - | 17 ~ 64 | - | - | ||
- | 1 | 8 Days | 10 | 15 | 36 | Shape B | [Aluminum] Aluminum Alloy 7000 series | Clear Anodize | - | - | 16 ~ 20 | - | - | - | - | - | ||
- | 1 | 8 Days | 10 | 15 | 36 | Shape B | [Aluminum] Aluminum Alloy 7000 series | Clear Anodize | - | - | - | - | - | - | 16 ~ 69 | - | ||
- | 1 | 8 Days | 10 | 15 | 36 | Shape B | [Aluminum] Aluminum Alloy 7000 series | Clear Anodize | - | - | - | - | 16 ~ 71 | - | - | - | ||
- | 1 | 8 Days | 10 | 15 | 36 | Shape B | [Aluminum] Aluminum Alloy 7000 series | Clear Anodize | - | 16 ~ 50 | - | - | - | - | - | - | ||
- | 1 | 8 Days | 10 | 15 | 36 | Shape B | [Aluminum] Aluminum Alloy 7000 series | Clear Anodize | - | - | - | 16 ~ 61 | - | - | - | - | ||
- | 1 | 8 Days | 10 | 15 | 36 | Shape B | [Aluminum] Aluminum Alloy 7000 series | Clear Anodize | - | - | - | - | - | 16 ~ 69 | - | - | ||
- | 1 | 8 Days | 10 | 25 | 36 | Shape B | [Aluminum] Aluminum Alloy 7000 series | Clear Anodize | - | - | 16 ~ 20 | - | - | - | - | - | ||
- | 1 | 8 Days | 10 | 25 | 36 | Shape B | [Aluminum] Aluminum Alloy 7000 series | Clear Anodize | - | - | - | - | - | - | 16 ~ 69 | - | ||
- | 1 | 8 Days | 10 | 25 | 36 | Shape B | [Aluminum] Aluminum Alloy 7000 series | Clear Anodize | - | - | - | - | 16 ~ 71 | - | - | - | ||
- | 1 | 8 Days | 10 | 25 | 36 | Shape B | [Aluminum] Aluminum Alloy 7000 series | Clear Anodize | - | 16 ~ 50 | - | - | - | - | - | - | ||
- | 1 | 8 Days | 10 | 25 | 36 | Shape B | [Aluminum] Aluminum Alloy 7000 series | Clear Anodize | - | - | - | 16 ~ 61 | - | - | - | - | ||
- | 1 | 8 Days | 10 | 25 | 36 | Shape B | [Aluminum] Aluminum Alloy 7000 series | Clear Anodize | - | - | - | - | - | 16 ~ 69 | - | - | ||
- | 1 | 8 Days | 10 | 30 | 36 | Shape B | [Aluminum] Aluminum Alloy 7000 series | Clear Anodize | - | - | 16 ~ 20 | - | - | - | - | - | ||
- | 1 | 8 Days | 10 | 30 | 36 | Shape B | [Aluminum] Aluminum Alloy 7000 series | Clear Anodize | - | - | - | - | - | - | 16 ~ 69 | - | ||
- | 1 | 8 Days | 10 | 30 | 36 | Shape B | [Aluminum] Aluminum Alloy 7000 series | Clear Anodize | - | - | - | - | 16 ~ 71 | - | - | - | ||
- | 1 | 8 Days | 10 | 30 | 36 | Shape B | [Aluminum] Aluminum Alloy 7000 series | Clear Anodize | - | 16 ~ 50 | - | - | - | - | - | - | ||
- | 1 | 8 Days | 10 | 30 | 36 | Shape B | [Aluminum] Aluminum Alloy 7000 series | Clear Anodize | - | - | - | 16 ~ 61 | - | - | - | - | ||
- | 1 | 8 Days | 10 | 30 | 36 | Shape B | [Aluminum] Aluminum Alloy 7000 series | Clear Anodize | - | - | - | - | - | 16 ~ 69 | - | - | ||
- | 1 | 8 Days | 10 | 40 | 36 | Shape B | [Aluminum] Aluminum Alloy 7000 series | Clear Anodize | - | - | 16 ~ 20 | - | - | - | - | - | ||
- | 1 | 8 Days | 10 | 40 | 36 | Shape B | [Aluminum] Aluminum Alloy 7000 series | Clear Anodize | - | - | - | - | - | - | 16 ~ 69 | - | ||
- | 1 | 8 Days | 10 | 40 | 36 | Shape B | [Aluminum] Aluminum Alloy 7000 series | Clear Anodize | - | - | - | - | 16 ~ 71 | - | - | - |
Loading...
Type | Timing Pulleys | Belt Type | S8M | Timing Pulleys/Idlers | Pulleys |
---|
Configure
Basic Attributes
Belt Width(mm)
[T] Number of Teeth
Material
Surface Treatment
[Y] Shaft Bore Specification (Both Ends Stepped Hole)(mm)
[N] Shaft Bore Specification (New JIS Keyway Hole + Tap)(mm)
[C] Shaft Bore Specification (Old JIS Keyway Hole + Tap)(mm)
[P] Shaft Bore Specification (Round Hole + Tap)(mm)
[H] Shaft Bore Specification (Round Hole)(mm)
[V] Shaft Bore Specification (Stepped Hole)(mm)
[F] Shaft Bore Specification (Stepped Hole: Counterbored Holes on the Hub Side)(mm)
[WB] Shaft Bore Specification (Two-Stepped Hole on one side)(mm)
Type
Pulley Shape
Filter by CAD data type
Filter by standard shipping days
Optional Attributes