Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Type | Outer Cylinder | Ball | Retainer | Ambient Operating Temp. | Accessory | |
Material | Hardness | Material | Material | |||
C-LMU | EN 1.3505 Equiv. | 58HRC~ | EN 1.3505 Equiv. | Plastic | -20~80°C | Seal Material Nitrile Rubber |
Part Number |
C-LMU6 |
Part Number | D | L | B | W | D1 | Eccentricity (Max.) | Rows of Balls | Mass (g) | |||||
Type | dr | Tolerance | Tolerance | Tolerance | Tolerance | ||||||||
C-LMU | 3 | +0.003 -0.011 | 7 | +0.006 -0.011 | 10 | +0.1 -0.2 | - | - | - | - | 0.016 | 4 | 1.4 |
4 | 8 | 12 | - | - | 2 | ||||||||
5 | 10 | 15 | 8 | 0 -0.4 | 1.1 | 9.6 | 4 | ||||||
6 | +0.003 -0.012 | 12 | +0.006 -0.013 | 19 | +0.2 -0.4 | 11.3 | 11.5 | 0.024 | 8.5 | ||||
8 | 15 | 24 | 15.3 | 14.3 | 17 | ||||||||
10 | 19 | +0.006 -0.015 | 29 | 19.4 | 1.3 | 18 | 31 | ||||||
12 | 21 | 30 | 20.4 | 20 | 41 | ||||||||
13 | 23 | 32 | 22 | 46 | |||||||||
16 | 28 | 37 | 23.3 | 1.6 | 27 | 73 | |||||||
20 | +0.003 -0.013 | 32 | +0.006 -0.018 | 42 | 27.3 | 30.5 | 0.030 | 5 | 98 | ||||
25 | 40 | 59 | +0.2 -0.5 | 37.3 | 0 -0.5 | 1.85 | 38 | 6 | 236 | ||||
30 | 45 | 64 | 40.8 | 43 | 262 | ||||||||
35 | +0.003 -0.015 | 52 | +0.006 -0.021 | 70 | 45.3 | 2.1 | 49 | 0.040 | 425 | ||||
40 | 60 | 80 | 56.3 | 57 | 654 | ||||||||
50 | 80 | 100 | 68.8 | 2.6 | 76.5 | 1700 |
No seal for dr=3 and 4. No-Seal Type has lower sliding resistance (0.4 ~ 1.2N) and moves smoothly. To prevent intrusion of dust on sliding contact surface, dust resistance measures should be taken separately. Spacers and Holding Plates for linear bushings can be selected from P.238. For Precautions for Use, refer to P. 221. |
dr | Basic Load Rating | |
C (Dynamic) N | Co (Static) N | |
3 | 69 | 105 |
4 | 88 | 127 |
5 | 167 | 206 |
6 | 206 | 265 |
8 | 265 | 380 |
10 | 372 | 549 |
12 | 412 | 598 |
13 | 510 | 784 |
16 | 775 | 1180 |
20 | 882 | 1370 |
25 | 980 | 1570 |
30 | 1570 | 2740 |
35 | 1670 | 3140 |
40 | 2160 | 4020 |
50 | 3820 | 7940 |
dr | Shaft Dia. | Housing Dia. | |
g6 Tolerance | Tolerance | ||
3 | −0.002 −0.008 | 7 | +0.021 +0.006 |
4 | -0.004 -0.012 | 8 | |
5 | 10 | ||
6 | 12 | +0.024 +0.006 | |
8 | -0.005 -0.014 | 15 | |
10 | 19 | +0.027 +0.006 | |
12 | -0.006 -0.017 | 21 | |
13 | 23 | ||
16 | 28 | ||
20 | -0.007 -0.020 | 32 | +0.031 +0.006 |
25 | 40 | ||
30 | 45 | ||
35 | -0.009 -0.025 | 52 | +0.036 +0.006 |
40 | 60 | ||
50 | 80 |
3D preview is not available, because the part number has not yet been determined.
Part Number
|
---|
C-LMU3 |
C-LMU4 |
C-LMU5 |
C-LMU6 |
C-LMU8 |
C-LMU10 |
C-LMU12 |
C-LMU13 |
C-LMU16 |
C-LMU20 |
C-LMU25 |
C-LMU30 |
C-LMU35 |
C-LMU40 |
C-LMU50 |
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | [dr] Inner Diameter (mm) | [L] Length (Total) (mm) | [D] Outer Diameter (mm) | Basic Load Rating Dynamic Rating (Detail) (N) | Basic Load Rating Static Rating (N) | |
---|---|---|---|---|---|---|---|---|---|
2.16 € | 1 | Available |
Same day
Stock | 3 | 10 | 7 | 69 | 105 | |
2.04 € | 1 | Available |
Same day
Stock | 4 | 12 | 8 | 88 | 127 | |
2.04 € | 1 | Available |
Same day
Stock | 5 | 15 | 10 | 167 | 206 | |
1.94 € | 1 | Available |
Same day
Stock | 6 | 19 | 12 | 206 | 265 | |
1.88 € | 1 | Available |
Same day
Stock | 8 | 24 | 15 | 265 | 380 | |
1.94 € | 1 | Available |
Same day
Stock | 10 | 29 | 19 | 372 | 549 | |
1.87 € | 1 | Available |
Same day
Stock | 12 | 30 | 21 | 412 | 598 | |
2.00 € | 1 | Available | 5 Days | 13 | 32 | 23 | 510 | 784 | |
2.37 € | 1 | Available |
Same day
Stock | 16 | 37 | 28 | 775 | 1180 | |
3.12 € | 1 | Available | 5 Days | 20 | 42 | 32 | 882 | 1370 | |
3.93 € | 1 | Available |
Same day
Stock | 25 | 59 | 40 | 980 | 1570 | |
5.40 € | 1 | Available | 5 Days | 30 | 64 | 45 | 1570 | 2740 | |
7.78 € | 1 | Available | 5 Days | 35 | 70 | 52 | 1670 | 3140 | |
11.77 € | 1 | Available | 5 Days | 40 | 80 | 60 | 2160 | 4020 | |
13.72 € | 1 | Available | 5 Days | 50 | 100 | 80 | 3820 | 7940 |
Loading...
Type2 | Straight | Style | Standard | Material of Outer Cylinder | EN 1.3505 Equiv. |
---|---|---|---|---|---|
Outer Cylinder Surface Treatment | No Surface Treatment | Motion | Linear Motion | Grease Coating | Not Provided |
Number of Linear Ball Bearings | Single | Type | Straight | Version Length Variant | Single |
Ball Material | EN 1.3505 Equiv. | Retainer Material | Plastic | Seals | Nitrile Rubber |
Configure
Stock
Basic Attributes
[dr] Inner Diameter(mm)
[L] Length (Total)(mm)
[D] Outer Diameter(mm)
Type
Filter by CAD data type
Filter by standard shipping days
Optional Attributes