Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Type | Outer Cylinder | Balls | Pad Case / Retainer | Ambient Operating Temp. | Accessory | |||
Single | Double | Material | Hardness | Surface Treatment | Material | Material | ||
LMU-MX | LMUW-MX | EN 1.3505 Equiv. | 58HRC~ | - | EN 1.3505 Equiv. | Plastic (Duracon M90 Equiv.) | -20~80°C | SealMaterial: Nitrile Rubber |
Part Number |
LMU-MX16 LHFR-MX12 |
Part Number | D | L | L1 | V | B | W | D1 | (r) | Eccentricity (Max.) | Rows of Balls | Basic Load Rating | Mass (g) | ||||||
Type | dr | Tolerance | Tolerance | Tolerance | Tolerance | C (Dynamic) N | Co (Static) N | |||||||||||
LMU-MX | 10 | 0 -0.009 | 19 | 0 -0.013 | 39 | 29 | 0 -0.2 | 5 | 19.4 | 0 -0.4 | 1.3 | 18 | 0.4 | 0.012 | 4 | 372 | 549 | 35 |
12 | 21 | 41 | 30 | 5.5 | 20.4 | 20 | 0.8 | 412 | 598 | 45 | ||||||||
16 | 28 | 49 | 37 | 6 | 23.3 | 1.6 | 27 | 775 | 1180 | 80 | ||||||||
20 | 0 -0.010 | 32 | 0 -0.016 | 56 | 42 | 7 | 27.3 | 30.5 | 0.015 | 5 | 882 | 1370 | 109 | |||||
25 | 40 | 77 | 59 | 0 -0.3 | 9 | 37.3 | 0 -0.5 | 1.85 | 38 | 1.5 | 6 | 980 | 1570 | 255 | ||||
30 | 45 | 84 | 64 | 10 | 40.8 | 43 | 1570 | 2740 | 286 | |||||||||
35 | 0 -0.012 | 52 | 0 -0.019 | 92 | 70 | 11 | 45.3 | 2.1 | 49 | 0.020 | 1670 | 3140 | 453 | |||||
40 | 60 | 104 | 80 | 12 | 56.3 | 57 | 2160 | 4020 | 687 | |||||||||
50 | 80 | 128 | 100 | 14 | 68.8 | 2.6 | 76.5 | 3820 | 7940 | 1763 |
Part Number | D | L | L1 | V | B | W | D1 | (r) | Eccentricity (Max.) | Rows of Balls | Basic Load Rating | Allowable Static Moment (Mo N ∙ m) | Mass (g) | ||||||
Type | dr | Tolerance | Tolerance | Tolerance | Tolerance | C (Dynamic) N | Co (Static) N | ||||||||||||
LMUW-MX | 10 | 0 -0.010 | 19 | 0 -0.016 | 65 | 55 | 0 -0.3 | 5 | 41.4 | 0 -0.5 | 1.3 | 18 | 0.4 | 0.015 | 4 | 588 | 1100 | 7.24 | 66 |
12 | 21 | 68 | 57 | 5.5 | 43.4 | 20 | 0.8 | 657 | 1200 | 10.9 | 84 | ||||||||
16 | 28 | 82 | 70 | 6 | 49.8 | 1.6 | 27 | 1230 | 2350 | 19.7 | 152 | ||||||||
20 | 0 -0.012 | 32 | 0 -0.019 | 94 | 80 | 7 | 57.8 | 0 -0.6 | 30.5 | 0.020 | 5 | 1400 | 2740 | 26.8 | 191 | ||||
25 | 40 | 130 | 112 | 0 -0.4 | 9 | 78.3 | 1.85 | 38 | 1.5 | 6 | 1560 | 3140 | 43.4 | 459 | |||||
30 | 45 | 143 | 123 | 10 | 85.3 | 43 | 2490 | 5490 | 82.8 | 504 | |||||||||
35 | 0 -0.015 | 52 | 0 -0.022 | 157 | 135 | 11 | 94.8 | 2.1 | 49 | 0.025 | 2650 | 6270 | 110 | 823 | |||||
40 | 60 | 175 | 151 | 12 | 116.8 | 57 | 3430 | 8040 | 147 | 1203 | |||||||||
50 | 80 | 220 | 192 | 14 | 142.8 | 2.6 | 76.5 | 6080 | 15900 | 397 | 3163 |
3D preview is not available, because the part number has not yet been determined.
Part Number
|
---|
LMU-MX10 |
LMU-MX12 |
LMU-MX16 |
LMU-MX20 |
LMU-MX25 |
LMU-MX30 |
LMU-MX35 |
LMU-MX40 |
LMU-MX50 |
LMUW-MX10 |
LMUW-MX12 |
LMUW-MX16 |
LMUW-MX20 |
LMUW-MX25 |
LMUW-MX30 |
LMUW-MX35 |
LMUW-MX40 |
LMUW-MX50 |
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Diameter of Inscribed Circle dr (mm) | Overall Length L (mm) | The circulation type of balls | Outer Diameter D (mm) | Basic Load Rating Dynamic Rating (Detail) (N) | Basic Load Rating Static Rating (N) | Tolerance of Inscribed Circle (Minus Side) (mm) | Eccentricity (μm) | Length | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
5.81 € | 1 | Available |
Same day
Stock | 10 | 10 | 39 | 1-fach | 19 | 372 | 549 | -0.009 | 12 | 1-fach | |
5.69 € | 1 | Available |
Same day
Stock | 10 | 12 | 41 | 1-fach | 21 | 412 | 598 | -0.009 | 12 | 1-fach | |
7.07 € | 1 | Available |
Same day
Stock | 10 | 16 | 49 | 1-fach | 28 | 775 | 1180 | -0.009 | 12 | 1-fach | |
9.33 € | 1 | Available |
Same day
Stock | 10 | 20 | 56 | 1-fach | 32 | 882 | 1370 | -0.01 | 15 | 1-fach | |
11.72 € | 1 | Available | 12 Days | 10 | 25 | 77 | 1-fach | 40 | 980 | 1570 | -0.01 | 15 | 1-fach | |
16.17 € | 1 | Available |
Same day
Stock | 10 | 30 | 84 | 1-fach | 45 | 1570 | 2740 | -0.01 | 15 | 1-fach | |
23.92 € | 1 | Available |
Same day
Stock | 10 | 35 | 92 | 1-fach | 52 | 1670 | 3140 | -0.012 | 20 | 1-fach | |
28.50 € | 1 | 12 Days | 10 | 40 | 102.5 | 1-fach | 60 | 2160 | 4020 | -0.012 | 20 | 1-fach | ||
39.29 € | 1 | Available | 5 Days | 10 | 50 | 128 | 1-fach | 80 | 3820 | 7940 | -0.012 | 20 | 1-fach | |
8.54 € | 1 | Available |
Same day
Stock | 10 | 10 | 64.5 | Double | 19 | 588 | 1100 | -0.01 | 15 | - | |
8.88 € | 1 | Available |
Same day
Stock | 10 | 12 | 68 | Double | 21 | 657 | 1200 | -0.01 | 15 | - | |
10.10 € | 1 | 12 Days | 10 | 16 | 82 | Double | 28 | 1230 | 2350 | -0.01 | 15 | - | ||
13.44 € | 1 | 12 Days | 10 | 20 | 93 | Double | 32 | 1400 | 2740 | -0.012 | 20 | - | ||
19.35 € | 1 | 12 Days | 10 | 25 | 130 | Double | 40 | 1560 | 3140 | -0.012 | 20 | - | ||
28.47 € | 1 | Available |
Same day
Stock | 10 | 30 | 142 | Double | 45 | 2490 | 5490 | -0.012 | 20 | - | |
38.94 € | 1 | Available | 5 Days | 10 | 35 | 155.5 | Double | 52 | 2650 | 6270 | -0.015 | 25 | - | |
47.84 € | 10 | 9 Days | 10 | 40 | 175 | Double | 60 | 3430 | 8040 | -0.015 | 25 | - | ||
66.38 € | 1 | Available | 5 Days | 10 | 50 | 220 | Double | 80 | 6080 | 15900 | -0.015 | 25 | - |
Loading...
Type2 | Straight | Style | Standard | Material of Outer Cylinder | EN 1.3505 Equiv. |
---|---|---|---|---|---|
Outer Cylinder Surface Treatment | No Surface Treatment | Motion | Linear Motion | Lubrication Type | Lubrication Unit MX-equipped |
Accuracy | High Grade | Type | Straight | Ball Material | EN 1.3505 Equiv. |
Retainer Material | Plastic (POM Equiv.) | Seals | With Seal | Greased filled | Lithium Soap Base |
Configure
Stock
Basic Attributes
Diameter of Inscribed Circle dr(mm)
Overall Length L(mm)
The circulation type of balls
Outer Diameter D(mm)
Eccentricity(μm)
Length
Type
Filter by CAD data type
Filter by standard shipping days
Optional Attributes