Round Wire Coil Springs / Deflection 40% / O.D. Referenced (Part Numbers - CAD Download)
- Volume Discount
- Stock
(i)Remark
- Please check the content on our website as the PDF does not contain the most up-to-date information.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Material EN 1.4301 (WPB) Equiv.
Specifications
| Part Number |
| UL16-80 UTT16-80 |
■UL: Fmax. (Allowable Deflection) =Lx40%
kgf (Load)=N/mm (Spring Constant) x0.101972xF (Deflection)
{kgf}=Nx0.101972
For Types marked with *, both ends are not ground.
The values of solid length are for reference only.
There may be some variations depending on the lot.
Usage Count: 1 Million Times
| Part Number | d | Solid Length | F max. | N{kgf}max. | Unit Price | ||
| Type D-L | |||||||
| UL 2- | 5* | 0.2 | 1.65 | 2 | 0.98 | {0.1} | |
| 10* | 0.26 | 5.07 | 4 | 1.96 | {0.2} | ||
| 15* | 0.26 | 5.07 | 6 | 2.94 | {0.3} | ||
| 20* | 0.3 | 9.9 | 8 | 3.92 | {0.4} | ||
| 25* | 0.32 | 14.1 | 10 | 4.90 | {0.5} | ||
| 30* | 0.32 | 14.1 | 12 | 5.88 | {0.6} | ||
| UL 3- | 5* | 0.30 | 2 | 2 | 2.0 | {0.2} | |
| 10* | 0.35 | 3.7 | 4 | 3.9 | {0.4} | ||
| 15* | 0.4 | 6.6 | 6 | 5.9 | {0.6} | ||
| 20* | 0.4 | 6.6 | 8 | 7.8 | {0.8} | ||
| 25* | 0.45 | 11.7 | 10 | 9.8 | {1 } | ||
| 30* | 0.45 | 11.7 | 12 | 11.8 | {1.2} | ||
| 35* | 0.45 | 11.7 | 14 | 13.7 | {1.4} | ||
| 40* | 0.5 | 20 | 16 | 15.7 | {1.6} | ||
| UL 4- | 5* | 0.35 | 2.1 | 2 | 2.0 | {0.2} | |
| 10* | 0.45 | 5.3 | 4 | 3.9 | {0.4} | ||
| 15* | 0.45 | 5.3 | 6 | 5.9 | {0.6} | ||
| 20* | 0.5 | 8 | 8 | 7.8 | {0.8} | ||
| 25* | 0.5 | 8 | 10 | 9.8 | {1 } | ||
| 30* | 0.55 | 12.7 | 12 | 11.8 | {1.2} | ||
| 35* | 0.55 | 12.7 | 14 | 13.7 | {1.4} | ||
| 40 | 0.6 | 19.8 | 16 | 15.7 | {1.6} | ||
| 45 | 0.6 | 19.8 | 18 | 17.7 | {1.8} | ||
| 50 | 0.6 | 19.8 | 20 | 19.6 | {2 } | ||
| 60 | 0.65 | 29.9 | 24 | 23.5 | {2.4} | ||
| UL 5- | 5* | 0.4 | 2.2 | 2 | 2.0 | {0.2} | |
| 10* | 0.5 | 4.75 | 4 | 3.9 | {0.4} | ||
| 15* | 0.5 | 4.75 | 6 | 5.9 | {0.6} | ||
| 20* | 0.55 | 6.88 | 8 | 7.8 | {0.8} | ||
| 25* | 0.55 | 6.88 | 10 | 9.8 | {1 } | ||
| 30 | 0.65 | 14.95 | 12 | 11.8 | {1.2} | ||
| 35 | 0.65 | 14.95 | 14 | 13.7 | {1.4} | ||
| 40 | 0.65 | 14.95 | 16 | 15.7 | {1.6} | ||
| 45 | 0.7 | 21.7 | 18 | 17.7 | {1.8} | ||
| 50 | 0.7 | 21.7 | 20 | 19.6 | {2 } | ||
| 60 | 0.75 | 30.75 | 24 | 23.5 | {2.4} | ||
| UL 6- | 5* | 0.45 | 2.3 | 2 | 2.0 | {0.2} | |
| 10* | 0.55 | 4.4 | 4 | 3.9 | {0.4} | ||
| 15* | 0.55 | 4.4 | 6 | 5.9 | {0.6} | ||
| 20 | 0.65 | 8.5 | 8 | 7.8 | {0.8} | ||
| 25 | 0.65 | 8.5 | 10 | 9.8 | {1 } | ||
| 30 | 0.7 | 12.6 | 12 | 11.8 | {1.2} | ||
| 35 | 0.7 | 12.6 | 14 | 13.7 | {1.4} | ||
| 40 | 0.7 | 12.6 | 16 | 15.7 | {1.6} | ||
| 45 | 0.75 | 17.3 | 18 | 17.7 | {1.8} | ||
| 50 | 0.75 | 17.3 | 20 | 19.6 | {2 } | ||
| 60 | 0.8 | 24.8 | 24 | 23.5 | {2.4} | ||
| 70 | 0.8 | 24.8 | 28 | 27.5 | {2.8} | ||
| UL 8- | 10 | 0.65 | 4.6 | 4 | 3.9 | {0.4} | |
| 15 | 0.75 | 8.3 | 6 | 5.9 | {0.6} | ||
| 20 | 0.75 | 8.3 | 8 | 7.8 | {0.8} | ||
| 25 | 0.75 | 8.3 | 10 | 9.8 | {1 } | ||
| 30 | 0.8 | 10.4 | 12 | 11.8 | {1.2} | ||
| 35 | 0.8 | 10.4 | 14 | 13.7 | {1.4} | ||
| 40 | 0.8 | 10.4 | 16 | 15.7 | {1.6} | ||
| 45 | 0.85 | 14.5 | 18 | 17.7 | {1.8} | ||
| 50 | 0.85 | 14.5 | 20 | 19.6 | {2 } | ||
| 60 | 0.9 | 18 | 24 | 23.5 | {2.4} | ||
| 70 | 1.0 | 30 | 28 | 27.5 | {2.8} | ||
| 80 | 1.0 | 30 | 32 | 31.4 | {3.2} | ||
| UL 10- | 10 | 0.75 | 4.7 | 4 | 3.9 | {0.4} | |
| 15 | 0.8 | 6.2 | 6 | 5.9 | {0.6} | ||
| 20 | 0.8 | 6.2 | 8 | 7.8 | {0.8} | ||
| 25 | 0.9 | 9.5 | 10 | 9.8 | {1 } | ||
| 30 | 0.9 | 9.5 | 12 | 11.8 | {1.2} | ||
| 35 | 0.9 | 9.5 | 14 | 13.7 | {1.4} | ||
| 40 | 1.0 | 15.5 | 16 | 15.7 | {1.6} | ||
| 45 | 1.0 | 15.5 | 18 | 17.7 | {1.8} | ||
| 50 | 1.0 | 15.5 | 20 | 19.6 | {2 } | ||
| 60 | 1.1 | 23.7 | 24 | 23.5 | {2.4} | ||
| 70 | 1.1 | 23.7 | 28 | 27.5 | {2.8} | ||
| 80 | 1.1 | 23.7 | 32 | 31.4 | {3.2} | ||
| UL 12- | 15 | 0.9 | 6.75 | 6 | 5.9 | {0.6} | |
| 20 | 1 | 10 | 8 | 7.8 | {0.8} | ||
| 25 | 1 | 10 | 10 | 9.8 | {1.0} | ||
| 30 | 1.1 | 14.85 | 12 | 11.8 | {1.2} | ||
| 35 | 1.1 | 14.85 | 14 | 13.7 | {1.4} | ||
| 40 | 1.2 | 21.6 | 16 | 15.7 | {1.6} | ||
| 45 | 1.2 | 21.6 | 18 | 17.7 | {1.8} | ||
| 50 | 1.2 | 21.6 | 20 | 19.6 | {2.0} | ||
| 60 | 1.3 | 32.5 | 24 | 23.5 | {2.4} | ||
| 70 | 1.3 | 32.5 | 28 | 27.5 | {2.8} | ||
| 80 | 1.4 | 46.2 | 32 | 31.4 | {3.2} | ||
| UL 13- | 15 | 0.9 | 5.4 | 6 | 5.9 | {0.6} | |
| 20 | 1.0 | 8.25 | 8 | 7.8 | {0.8} | ||
| 25 | 1.0 | 8.25 | 10 | 9.8 | {1 } | ||
| 30 | 1.1 | 12.1 | 12 | 11.8 | {1.2} | ||
| 35 | 1.1 | 12.1 | 14 | 13.7 | {1.4} | ||
| 40 | 1.1 | 12.1 | 16 | 15.7 | {1.6} | ||
| 45 | 1.2 | 16.8 | 18 | 17.7 | {1.8} | ||
| 50 | 1.2 | 16.8 | 20 | 19.6 | {2 } | ||
| 60 | 1.2 | 16.8 | 24 | 23.5 | {2.4} | ||
| 70 | 1.4 | 35 | 28 | 27.5 | {2.8} | ||
| 80 | 1.4 | 35 | 32 | 31.4 | {3.2} | ||
| UL 16- | 15 | 1.1 | 7.7 | 6 | 5.9 | {0.6} | |
| 20 | 1.1 | 7.7 | 8 | 7.8 | {0.8} | ||
| 25 | 1.2 | 10.8 | 10 | 9.8 | {1 } | ||
| 30 | 1.2 | 10.8 | 12 | 11.8 | {1.2} | ||
| 35 | 1.3 | 14.3 | 14 | 13.7 | {1.4} | ||
| 40 | 1.3 | 14.3 | 16 | 15.7 | {1.6} | ||
| 45 | 1.4 | 19.6 | 18 | 17.7 | {1.8} | ||
| 50 | 1.4 | 19.6 | 20 | 19.6 | {2 } | ||
| 60 | 1.4 | 19.6 | 24 | 23.5 | {2.4} | ||
| 70 | 1.5 | 27 | 28 | 27.5 | {2.8} | ||
| 80 | 1.5 | 27 | 32 | 31.4 | {3.2} | ||
| UL 20- | 20 | 1.6 | 10.4 | 8 | 23.5 | {2.4} | |
| 25 | 1.6 | 10.4 | 10 | 29.4 | {3 } | ||
| 30 | 1.7 | 12.8 | 12 | 35.3 | {3.6} | ||
| 35 | 1.7 | 12.8 | 14 | 41.2 | {4.2} | ||
| 40 | 1.8 | 15.3 | 16 | 47.1 | {4.8} | ||
| 45 | 1.8 | 15.3 | 18 | 53.0 | {5.4} | ||
| 50 | 2 | 23 | 20 | 58.8 | {6 } | ||
| 60 | 2 | 23 | 24 | 70.6 | {7.2} | ||
| 70 | 2.2 | 35.2 | 28 | 82.4 | {8.4} | ||
| 80 | 2.2 | 35.2 | 32 | 94.1 | {9.6} | ||
{kgf}=Nx0.101972
For Types marked with *, both ends are not ground.
The values of solid length are for reference only.
There may be some variations depending on the lot.
Usage Count: 1 Million Times
■UTT: Fmax. (Allowable Deflection) =LxFa%
kgf (Load)=N/mm (Spring Constant) x0.101972xF (Deflection)
{kgf}=Nx0.101972
For Types marked with *, both ends are not ground.
The values of solid length are for reference only.
There may be some variations depending on the lot.
Usage Count: 1 Million Times
| Part Number | d | Solid Length | F max. | N{kgf} | Fa% | Unit Price | ||
| TypeD-L | Max. | |||||||
| UTT 3- | 5* | 0.35 | 2.8 | 2 | 2.9 | {0.3} | 40 | |
| 10* | 0.4 | 4.8 | 4 | 5.9 | {0.6} | |||
| 15* | 0.45 | 8.3 | 6 | 8.8 | {0.9} | |||
| 20* | 0.45 | 8.3 | 6 | 8.8 | {0.9} | 30 | ||
| 25* | 0.5 | 14 | 8 | 11.8 | {1.2} | 32 | ||
| 30* | 0.5 | 14 | 8 | 11.8 | {1.2} | 27 | ||
| UTT 4- | 5* | 0.4 | 2.6 | 2 | 2.9 | {0.3} | 40 | |
| 10* | 0.45 | 3.9 | 4 | 5.9 | {0.6} | |||
| 15* | 0.5 | 6 | 6 | 8.8 | {0.9} | |||
| 20* | 0.55 | 9.4 | 8 | 11.8 | {1.2} | |||
| 25 | 0.6 | 14.4 | 10 | 14.7 | {1.5} | |||
| 30 | 0.6 | 14.4 | 9.9 | 14.7 | {1.5} | 33 | ||
| UTT 5- | 5* | 0.45 | 2.6 | 2 | 2.9 | {0.3} | 40 | |
| 10* | 0.5 | 3.6 | 4 | 5.9 | {0.6} | |||
| 15 | 0.6 | 7.5 | 6 | 8.8 | {0.9} | |||
| 20 | 0.6 | 7.5 | 8 | 11.8 | {1.2} | |||
| 25 | 0.65 | 10.7 | 10 | 14.7 | {1.5} | |||
| 30 | 0.7 | 15.4 | 12 | 17.7 | {1.8} | |||
| 35 | 0.7 | 15.4 | 14 | 20.6 | {2.1} | |||
| UTT 6- | 5* | 0.5 | 2.4 | 2 | 3.9 | {0.4} | 40 | |
| 10 | 0.6 | 4.2 | 4 | 7.8 | {0.8} | |||
| 15 | 0.7 | 7.4 | 6 | 11.8 | {1.2} | |||
| 20 | 0.7 | 7.4 | 8 | 15.7 | {1.6} | |||
| 25 | 0.8 | 13.6 | 10 | 19.6 | {2.0} | |||
| 30 | 0.8 | 13.6 | 12 | 23.5 | {2.4} | |||
| 35 | 0.85 | 17.5 | 14 | 27.5 | {2.8} | |||
| 40 | 0.9 | 23.4 | 16 | 31.4 | {3.2} | |||
| 45 | 0.9 | 23.4 | 18 | 35.3 | {3.6} | |||
| 50 | 0.9 | 23.4 | 18 | 35.3 | {3.6} | 36 | ||
| 60 | 1.0 | 41 | 18 | 35.3 | {3.6} | 30 | ||
| 70 | 1.0 | 41 | 24 | 47.1 | {4.8} | 34 | ||
| UTT 8- | 10 | 0.75 | 5.3 | 4 | 7.8 | {0.8} | 40 | |
| 15 | 0.75 | 5.3 | 6 | 11.8 | {1.2} | |||
| 20 | 0.9 | 10.4 | 8 | 15.7 | {1.6} | |||
| 25 | 0.9 | 10.4 | 10 | 19.6 | {2.0} | |||
| 30 | 1.0 | 17 | 12 | 23.5 | {2.4} | |||
| 35 | 1.0 | 17 | 14 | 27.5 | {2.8} | |||
| 40 | 1.0 | 17 | 16 | 31.4 | {3.2} | |||
| 45 | 1.1 | 25.3 | 18 | 35.3 | {3.6} | |||
| 50 | 1.1 | 25.3 | 20 | 39.2 | {4.0} | |||
| 60 | 1.1 | 25.3 | 24 | 47.1 | {4.8} | |||
| 70 | 1.2 | 39.6 | 23.8 | 54.9 | {5.6} | |||
| UTT 10- | 10 | 0.85 | 5.1 | 4 | 7.8 | {0.8} | 40 | |
| 15 | 0.85 | 5.1 | 6 | 11.8 | {1.2} | |||
| 20 | 1.0 | 9.5 | 8 | 15.7 | {1.6} | |||
| 25 | 1.0 | 9.5 | 10 | 19.6 | {2.0} | |||
| 30 | 1.1 | 14.3 | 12 | 23.5 | {2.4} | |||
| 35 | 1.1 | 14.3 | 14 | 27.5 | {2.8} | |||
| 40 | 1.2 | 20.4 | 16 | 31.4 | {3.2} | |||
| 45 | 1.2 | 20.4 | 18 | 35.3 | {3.6} | |||
| 50 | 1.2 | 20.4 | 20 | 39.2 | {4.0} | |||
| 60 | 1.3 | 29.9 | 24 | 47.1 | {4.8} | |||
| 70 | 1.4 | 43.4 | 23.8 | 47.1 | {4.8} | 34 | ||
| UTT 13- | 15 | 1.0 | 5.75 | 6 | 11.8 | {1.2} | 40 | |
| 20 | 1.2 | 10.5 | 8 | 15.7 | {1.6} | |||
| 25 | 1.2 | 10.5 | 10 | 19.6 | {2.0} | |||
| 30 | 1.3 | 15 | 12 | 23.5 | {2.4} | |||
| 35 | 1.3 | 15 | 14 | 27.5 | {2.8} | |||
| 40 | 1.4 | 20.3 | 16 | 31.4 | {3.2} | |||
| 45 | 1.4 | 20.3 | 18 | 35.3 | {3.6} | |||
| 50 | 1.5 | 27.8 | 20 | 39.2 | {4.0} | |||
| 60 | 1.5 | 27.8 | 24 | 47.1 | {4.8} | |||
| 70 | 1.6 | 38.4 | 28 | 54.9 | {5.6} | |||
| 80 | 1.6 | 38.4 | 32 | 62.8 | {6.4} | |||
| UTT 16- | 15 | 1.2 | 7.2 | 6 | 11.8 | {1.2} | 40 | |
| 20 | 1.3 | 9.1 | 8 | 15.7 | {1.6} | |||
| 25 | 1.3 | 9.1 | 10 | 19.6 | {2.0} | |||
| 30 | 1.4 | 12.3 | 12 | 23.5 | {2.4} | |||
| 35 | 1.5 | 16.5 | 14 | 27.5 | {2.8} | |||
| 40 | 1.6 | 21.6 | 16 | 31.4 | {3.2} | |||
| 45 | 1.6 | 21.6 | 18 | 35.3 | {3.6} | |||
| 50 | 1.7 | 28 | 20 | 39.2 | {4.0} | |||
| 60 | 1.7 | 28 | 24 | 47.1 | {4.8} | |||
| 70 | 1.8 | 36 | 28 | 54.9 | {5.6} | |||
| 80 | 1.8 | 36 | 32 | 62.8 | {6.4} | |||
| UTT 20- | 20 | 1.7 | 10.6 | 8 | 31.4 | {3.2} | 40 | |
| 25 | 1.8 | 12.6 | 10 | 39.2 | {4.0} | |||
| 30 | 1.8 | 12.6 | 12 | 47.1 | {4.8} | |||
| 35 | 2.0 | 19 | 14 | 54.9 | {5.6} | |||
| 40 | 2.0 | 19 | 16 | 62.8 | {6.4} | |||
| 45 | 2.0 | 19 | 18 | 70.6 | {7.2} | |||
| 50 | 2.2 | 27.5 | 20 | 78.5 | {8.0} | |||
| 60 | 2.2 | 27.5 | 24 | 94.1 | {9.6} | |||
| 70 | 2.3 | 34.5 | 28 | 109.8 | {11.2} | |||
| 80 | 2.4 | 40.8 | 32 | 125.5 | {12.8} | |||
{kgf}=Nx0.101972
For Types marked with *, both ends are not ground.
The values of solid length are for reference only.
There may be some variations depending on the lot.
Usage Count: 1 Million Times
■ Spring Constant D12 is applicable to UY, UR, UF, UL and UBB Types only. D14 is applicable to UBB Type only.
| Type | UV | UY | UR | UF | UL | UTT | UM | UH | UBB | |||||||||||||||||||
| D | ||||||||||||||||||||||||||||
| 2 | 0.05{0.005} | 0.2{0.02} | 0.3{0.03} | 0.5{0.05} | ||||||||||||||||||||||||
| 3 | N/mm 0.05 {kgf/mm} {0.005} | N/mm 0.098 {kgf/mm} {0.01} | N/mm 0.29 {kgf/mm} {0.03} | N/mm 0.49 {kgf/mm} {0.05} | N/mm 0.98 {kgf/mm} {0.1} | N/mm 1.5 {kgf/mm} {0.15} | ||||||||||||||||||||||
| 4 | 2.0{0.2} | 2.9{0.3} | 4.9{0.5} | |||||||||||||||||||||||||
| 5 | ||||||||||||||||||||||||||||
| 6 | N/mm 2.0 {kgf/mm} {0.2} | N/mm 2.9 {kgf/mm} {0.3} | N/mm 5.9 {kgf/mm} {0.6} | N/mm 9.8 {kgf/mm} {1.0} | ||||||||||||||||||||||||
| 8 | ||||||||||||||||||||||||||||
| 10 | N/mm 0.2 {kgf/mm} {0.02} | |||||||||||||||||||||||||||
| 12 | ||||||||||||||||||||||||||||
| 13 | N/mm 9.8 {kgf/mm} {1.0} | N/mm 19.6 {kgf/mm} {2.0} | ||||||||||||||||||||||||||
| 14 | ||||||||||||||||||||||||||||
| 16 | ||||||||||||||||||||||||||||
| 20 | 0.3{0.03} | 0.5{0.05} | 0.98{0.1} | 2.9{0.3} | 3.9{0.4} | 4.9{0.5} | 14.7{1.5} | 29.4{3.0} | ||||||||||||||||||||
| Fmax. | F=L×70% | F=LxFa% | F=LxFa% | F=Lx45% | F=Lx40% | F=LxFa% | F=LxFa% | F=LxFa% | F=LxFa% | |||||||||||||||||||
Alterations
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Loading...
Part Number
|
|---|
| UL5-45 |
| UL5-45-LKC |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Allowable Load (Configurable Range) (N) | End Surface Status | Max. Load (N) | Height upon Max. Load applied L-F (mm) | Free Length L (mm) | Outer Dia. D (or D1) (mm) | Spring Constant (N/mm) | Wire Dia. (mm) | Solid Length (mm) | Tolerance Change | Allowable Deflection (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1.96 € | 1 | Available | 5 Days | 10 | 16.01 to 30.00 | With Grinding | 17.7 | 27 | 45 | 5 | 0.98 | 0.7 | 21.7 | - | 18 | |
4.91 € | 1 | Available | 9 Days | 10 | 16.01 to 30.00 | With Grinding | 17.7 | 27 | 45 | 5 | 0.98 | 0.7 | 21.7 | LKC (with Tolerance Change) | 18 |
Loading...
Basic information
| Material | EN 1.4301 (WPB) Equiv. |
|---|
Configure
Basic Attributes
-
Tolerance Change
- LKC (with Tolerance Change)
-
Type
- UL
- UTT
-
Allowable Load (Configurable Range)(N)
- Up to 1.50
- 1.51 to 4.50
- 4.51 to 8.50
- 8.51 to 16.00
- 16.01 to 30.00
- 30.01 to 50.00
- 50.01 to 73.00
- 73.01 to 107.00
- 107.01 to 150.00
-
End Surface Status
- With Grinding
- Without Grinding
-
Max. Load(N)
-
Height upon Max. Load applied L-F(mm)
-
Free Length L(mm)
-
Outer Dia. D (or D1)(mm)
-
Spring Constant(N/mm)
-
Wire Dia.(mm)
-
Solid Length(mm)
- 1.65
- 2
- 2.1
- 2.2
- 2.3
- 2.4
- 2.6
- 2.8
- 3.6
- 3.7
- 3.9
- 4.2
- 4.4
- 4.6
- 4.7
- 4.75
- 4.8
- 5.07
- 5.1
- 5.3
- 5.4
- 5.75
- 6
- 6.2
- 6.5
- 6.6
- 6.88
- 7.2
- 7.4
- 7.5
- 7.7
- 8
- 8.25
- 8.3
- 8.5
- 9
- 9.1
- 9.4
- 9.5
- 9.9
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 11.7
- 12.1
- 12.3
- 12.5
- 12.6
- 12.7
- 12.8
- 13.6
- 14
- 14.1
- 14.3
- 14.4
- 14.5
- 14.95
- 15
- 15.3
- 15.4
- 15.5
- 16.5
- 16.8
- 17
- 17.3
- 17.5
- 18
- 19
- 19.6
- 19.8
- 20
- 20.3
- 20.4
- 21.6
- 21.7
- 23
- 23.4
- 23.7
- 24
- 24.8
- 25.3
- 27
- 27.5
- 27.8
- 28
- 29.9
- 30
- 30.75
- 32
- 34.5
- 35
- 35.2
- 36
- 38.4
- 39.6
- 40.8
- 41
- 43.4
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- Same day
- 5 Days or Less
- 9 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
Tech Support
- Technical Support
- Tel：+49 69 668173-0 / FAX：+49 69 668173-360
- Technical Inquiry
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.