- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 3:00 21/4/2024 to 0:00 (CET) 22/4/2024. We apologize for the inconvenience.
Linear shafts / one-sided internal thread (SFJT13-114-M6)
Product Details:
Manufacturer part number: SFJT13-114-M6
Brand: MISUMI
Price: Please contact the support for quotation
Delivery time: 4 Days
Technical Data:
Shaft Dia. D: 13 mm
Length L: 114 mm
Material: [Iron] EN 1.3505 Equiv.
Heat Treatment: Induction Hardened
Surface Treatment: No
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
SFJT13-114-M6
| Type | Material | Hardness | Surface Treatment | ||
| D Tol. g6 | D Tol. h5 | D Tol. f8 | |||
| SFJT | SFUT | - | EN 1.3505 Equiv. | Effective Hardened Depth of Induction Hardening >>P.112 EN 1.3505 Equiv. 58HRC~ EN 1.4037 Equiv. 56HRC~ | - |
| SSFJT | SSFUT | - | EN 1.4037 Equiv. | ||
| PSFJT | PSFUT | - | EN 1.3505 Equiv. | Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 5µ or More | |
| PSSFJT | PSSFUT | - | EN 1.4037 Equiv. | ||
| RSFJT | - | - | EN 1.3505 Equiv. | LTBC Plating | |
| - | - | PSFGT | EN 1.1191 Equiv. | - | Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 10µ or More |
| - | - | PSSFGT | EN 1.4301 Equiv. | ||
Specifications
| Part Number | - | L | - | M |
| SFJT8 | - | 200 | - | M4 |
| RSFJT20 | - | 325 | - | M8 |
| Part Number | L specified in 1mm Increment | M (Coarse) Selection | D Tol. | C | ||||||||||||||||
| Type | D | g6 | h5 | f8 | ||||||||||||||||
| (D Tolerance g6) SFJT SSFJT PSFJT PSSFJT (D Tolerance f8) PSFGT (D≥6) PSSFGT (D≥6) | (D Tolerance h5) SFUT SSFUT PSFUT PSSFUT | 4 | 20~ 300 | 2 | -0.004 -0.012 | 0 -0.005 | - | 0.2 or Less | ||||||||||||
| 5 | 20~ 400 | 2.6 | 3 | -0.004 -0.012 | 0 -0.005 | - | 0.2 or Less | |||||||||||||
| 6 | 20~ 600 | 3 | -0.004 -0.012 | 0 -0.005 | -0.010 -0.028 | 0.5 or Less | ||||||||||||||
| 8 | 20~ 800 | 3 | 4 | 5 | -0.005 -0.014 | 0 -0.006 | -0.013 -0.035 | 0.5 or Less | ||||||||||||
| 10 | 20~ 800 | 3 | 4 | 5 | 6 | -0.005 -0.014 | 0 -0.006 | -0.013 -0.035 | 0.5 or Less | |||||||||||
| 12 | 20~1000 | 4 | 5 | 6 | 8 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 0.5 or Less | |||||||||||
| 13 | 25~1000 | 4 | 5 | 6 | 8 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 0.5 or Less | |||||||||||
| 15 | 25~1000 | 4 | 5 | 6 | 8 | 10 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 0.5 or Less | ||||||||||
| 16 | 30~1200 | 4 | 5 | 6 | 8 | 10 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 0.5 or Less | ||||||||||
| 18 | 30~1200 | 4 | 5 | 6 | 8 | 10 | 12 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 | 0.5 or Less | |||||||||
| 20 | 30~1200 | 4 | 5 | 6 | 8 | 10 | 12 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 | 1.0 or Less | |||||||||
| 25 | 35~1200 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 | 1.0 or Less | ||||||||
| 30 | 35~1500 | 6 | 8 | 10 | 12 | 16 | 20 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 | 1.0 or Less | |||||||||
| 35 | 35~1500 | 8 | 10 | 12 | 16 | 20 | 24 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 | 1.0 or Less | |||||||||
| 40 | 50~1500 | 10 | 12 | 16 | 20 | 24 | 30 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 | 1.0 or Less | |||||||||
| 50 | 65~1500 | 12 | 16 | 20 | 24 | 30 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 | 1.0 or Less | ||||||||||
| Part Number | L specified in 1mm Increment | M (Coarse) Selection | D Tol. | C | |||||||||||
| Type | D | g6 | |||||||||||||
| (D Tolerance g6) LTBC Plating RSFJT | 4 | 20~300 | 2 | -0.004 -0.012 | 0.2 or Less | ||||||||||
| 5 | 20~400 | 2.6 | 3 | -0.004 -0.012 | 0.2 or Less | ||||||||||
| 6 | 20~500 | 3 | -0.004 -0.012 | 0.5 or Less | |||||||||||
| 8 | 20~500 | 3 | 4 | 5 | -0.005 -0.014 | 0.5 or Less | |||||||||
| 10 | 20~500 | 3 | 4 | 5 | 6 | -0.005 -0.014 | 0.5 or Less | ||||||||
| 12 | 20~500 | 4 | 5 | 6 | 8 | -0.006 -0.017 | 0.5 or Less | ||||||||
| 13 | 25~500 | 4 | 5 | 6 | 8 | -0.006 -0.017 | 0.5 or Less | ||||||||
| 15 | 25~500 | 4 | 5 | 6 | 8 | 10 | -0.006 -0.017 | 0.5 or Less | |||||||
| 16 | 30~500 | 4 | 5 | 6 | 8 | 10 | -0.006 -0.017 | 0.5 or Less | |||||||
| 18 | 30~500 | 4 | 5 | 6 | 8 | 10 | 12 | -0.006 -0.017 | 0.5 or Less | ||||||
| 20 | 30~500 | 4 | 5 | 6 | 8 | 10 | 12 | -0.007 -0.020 | 1.0 or Less | ||||||
| 25 | 35~500 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | -0.007 -0.020 | 1.0 or Less | |||||
| 30 | 35~500 | 6 | 8 | 10 | 12 | 16 | 20 | -0.007 -0.020 | 1.0 or Less | ||||||
Alterations
Part Number:
- In order to open the 3D preview, the part number must be fixed.
3D preview is not available, because the part number has not yet been determined.
Part Number
|
|---|
| SFJT13-114-M6 |
| Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Shaft Dia. D (mm) | Length L (mm) | Material | Heat Treatment | Surface Treatment | Shaft Fits Tolerance | Hardness | Change Tapped Thread M to Fine One [MSC] (mm) | Change the effective length of tapped part to Mx3 (mm) | Tapped (Coarse (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 4 Days | 10 | 13 | 114 | [Iron] EN 1.3505 Equiv. | Induction Hardened | No | g6 | Induction Hardening (58HRC~) | - | - | 6 |
Loading...
More Information
Full Length Hardness Guaranteed Shafts Here
L Dimension Tolerance, Circularity, Straightness, Perpendicularity, Concentricity and Changes in Hardness >> P.111
Features of LTBC Plating
Here
Example of Use
Basic information
| Basic Shape | Straight | Shaft end shape (left) | Tapped | Shaft end shape (right) | Straight |
|---|---|---|---|---|---|
| Shaft end perpendicularity | Perpendicularity (0.2) |
Configure
Basic Attributes
-
Shaft Dia. D(mm)
-
Material
- Iron
- Stainless Steel
- Iron
-
Heat Treatment
- No
- Induction Hardened
-
Surface Treatment
- No
- Hard Chrome Plating
- LTBC Plating
-
Shaft Fits Tolerance
-
Hardness
- Induction Hardening (56HRC~)
- Induction Hardening (58HRC~)
- No Induction Hardening
-
Change Tapped Thread M to Fine One [MSC](mm)
-
Change the effective length of tapped part to Mx3(mm)
-
Type
- PSFGT
- PSFJT
- PSFUT
- PSSFGT
- PSSFJT
- PSSFUT
- RSFJT
- SFJT
- SFUT
- SSFJT
- SSFUT
-
Length L(mm)
-
Tapped (Coarse(mm)
-
Filter by CAD data type
- 2D
- 3D
Filter by standard shipping days
-
- All
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 12 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Complementary Products
-
Plain bearing bushes / flange selectable / with housing, number of bushes selectable / seal selectable
MISUMI Standard Price : 13.33 € Shipping Days: Same day
-
Set collars / stainless steel, steel / wedge clamping / double cross hole, cross thread
MISUMI Standard Price : 5.44 € Shipping Days: Same day
-
Linear ball bearings / wide block shape / aluminium / anodised / single double bush
MISUMI Standard Price : 16.58 € Shipping Days: Same day
-
Linear ball bearings / stainless steel, steel / chrome-plated, nickel-plated / double ring groove
MISUMI Standard Price : 3.35 € Shipping Days: Same day
Tech Support
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.