Type Code Seach | *NOT READY*: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Square End Mills (Carbide)（Torsion Angle (θ)：Standard Helix (30˚ to 40˚) Page 2）

307

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 12 Days or Less

?* Information on days to ship and prices

TSC series carbide radius end mill for countersink, 3-flute / short model

MISUMI

[Features]
-Demonstrates high performance in machining general steel, EN 1.4301 Equiv. (sintered) and heat-treated steel (up to 50 HRC)
-By leaving the round land width (the width of the cylindrical part without clearance angle at the circumferential groove), it is possible to achieve an effect similar to that of a reamer and improve the surface roughness of the machined surface
-The end cutting edge is almost flat, making it ideal for finishing counterbores.
-The 3-flute shape suppresses chatter that can occur during drilling and counterboring
-Optimal for machining in the low to medium speed range due to the universal 30° helix angle
-The coating has high oxidation resistance and high hardness, achieving long life. Effective in high-speed machining and dry machining as coating characteristics.

Volume Discount

TS
General Steel
3 Flutes
S (Short)

Select to compare

› Configure now
Starting from^∗ ：	53.95 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide square end mill, 4-flute / 3D Flute Length (regular) model

MISUMI

The 3D flute length type that's capable of sophisticated grooving is also known for the producing the high-quality finish

Volume Discount

Non-Coated
General Steel
4 Flutes
R (Regular)

Select to compare

› Configure now
Min. Shipping Days ：	5 Days

TSC Series Carbide Roughing End Mill for Stainless Steel Machining

MISUMI

Ideal for the medium-finishing of difficult-to-cut SUS, etc.

Volume Discount

TS
SUS
3 Flutes
R (Regular)

Select to compare

› Configure now
Starting from^∗ ：	81.46 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Diamond Coated Carbide Square End Mill for Graphite Machining, 2-Flute / Long Model

MISUMI

The premium diamond coated products are available at the industry's lowest price

Volume Discount

DIA
Graphite
2 Flutes
L (Long)

Select to compare

› Configure now
Starting from^∗ ：	94.44 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Square End Mill for Graphite Machining, 2-Flute / Non-Coated, Long Model

MISUMI

[Features]
-Uncoated product with excellent cost efficiency
-Deep digging is possible due to long flute length
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

Non-Coated
Graphite
2 Flutes
L (Long)

Select to compare

› Configure now
Starting from^∗ ：	83.60 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Diamond Coated Carbide Square End Mill for Graphite Machining, 4-Flute / Long Model

MISUMI

The premium diamond coated products are available at the industry's lowest price

Volume Discount

DIA
Graphite
4 Flutes
L (Long)

Select to compare

› Configure now
Starting from^∗ ：	94.44 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Square End Mill for Graphite Machining, 4-Flute / Non-Coated, Long Model

MISUMI

[Features]
-Uncoated product with excellent price-performance ratio
-Deep digging possible due to long flute length
-Regrindable. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices, etc.

Volume Discount

Non-Coated
Graphite
4 Flutes
L (Long)

Select to compare

› Configure now
Starting from^∗ ：	100.51 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Square End Mill for Resin Machining, 2-Flute / Regular Model

MISUMI

The cutting edge with an emphasis on sharpness is ideal for resin machining

Volume Discount

Non-Coated
Resin
2 Flutes
R (Regular)

Select to compare

› Configure now
Starting from^∗ ：	22.54 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Square End Mill for Resin Machining, 2-Flute / Extra Long Model

MISUMI

Extra long type for resin that's capable of deep processing in the first shot

Volume Discount

Non-Coated
Resin
2 Flutes
EXL (Extra Long)

Select to compare

› Configure now
Starting from^∗ ：	25.34 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Square End Mill for Resin Machining, 2-Flute / Regular, Long Shank Model

MISUMI

Available in 10 sizes including the long shank type

Volume Discount

Non-Coated
Resin
2 Flutes
R (Regular)

Select to compare

› Configure now
Starting from^∗ ：	42.65 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAL Series Carbide Square End Mill, 2-Flute / 1.5D Flute Length (Stub) Model

MISUMI

Stub flute length items that are ideal for grooving are available at incredibly low prices

Volume Discount

XAL
General Steel
2 Flutes

Select to compare

› Configure now
Starting from^∗ ：	9.15 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAL Series Carbide Square End Mill, 2-Flute / 2, 5D Flute Length Model

MISUMI

The Misumi's unique lineup of fine flute length is available at attractive low prices

Volume Discount

XAL
General Steel
2 Flutes

Select to compare

› Configure now
Starting from^∗ ：	10.07 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) Model

MISUMI

A long flute length type that supports deep engraving

Volume Discount

XAL
General Steel
2 Flutes

Select to compare

› Configure now
Starting from^∗ ：	12.66 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Carbide Blade Neck Relief End Mill, 2-Flute / Short Model

MISUMI

A blade relief type that's not affected by the interference of tools

General Steel
2 Flutes
S (Short)

Select to compare

› Configure now
Min. Shipping Days ：	7 Days

Carbide Blade Neck Relief End Mill, 2-Flute / Regular Model

MISUMI

A blade relief type that's not affected by the interference of tools

General Steel
2 Flutes
R (Regular)

Select to compare

› Configure now
Min. Shipping Days ：	7 Days

Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill

MISUMI

[Features]
-Alteration cutter that can determine the corner chamfer size of carbide cutters in 0.1 mm steps
-Can be reground. Please refer to the "Regrinding Service" page for information on application procedures, range of services, prices etc.

Non-Coated
General Steel

Select to compare

› Configure now
Min. Shipping Days ：	7 Days

Carbide Blade Neck Relief End Mill, 4-Flute / Short Model

MISUMI

Blade relief type with a 4-flute structure

General Steel
4 Flutes
S (Short)

Select to compare

› Configure now
Min. Shipping Days ：	7 Days

Carbide Blade Neck Relief End Mill, 4-Flute / Regular Model

MISUMI

Blade relief type with a 4-flute structure

General Steel
4 Flutes
R (Regular)

Select to compare

› Configure now
Min. Shipping Days ：	7 Days

Carbide Square End Mill, 2-Flute / 0.01 mm Designation Model

MISUMI

The blade diameter of 0.01 mm increments can be selected from the extensive variations of flute length

Volume Discount

Non-Coated
General Steel
2 Flutes

Select to compare

› Configure now
Starting from^∗ ：	33.17 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

XCP Coated Carbide Square End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Stub / Short Type (Gash Land)

MISUMI

· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.
· Popular XCP series end mill with a shape that emphasizes blade tip rigidity

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	32.31 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

XCP Coated Carbide Square End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / 2.5D / Regular Type (Gash Land)

MISUMI

· A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
· Coating with excellent hardness and heat resistance makes it suitable for high speed machining.
· Available in MISUMI's extensive blade tip specifications

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	25.89 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

DLC Mill Long Sharp Corner, 2-Flute SL2DLCSC

NACHI(FUJIKOSHI)

An aluminum-use end mill suited for deep grooving, grooving at depth, or wide area side surface processing.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	79.55 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

GS MILL 4-Flute Blade 4GS

NACHI(FUJIKOSHI)

Supports a wide variety of materials such as green wood and hardened steel. Suited for machining grooves / finishing side surface.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	34.34 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

GSX MILL 2-Flute Blade 2.5D GSX2C-2.5D

NACHI(FUJIKOSHI)

Compatible with everything from wet machining of green timber to high speed dry machining of high hardness materials. Gash land type flute.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	22.27 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

GSX MILL 2-Flute Blade 2.5D P Type GSX2P-2.5D

NACHI(FUJIKOSHI)

Supports a wide variety of materials such as green wood and hardened steel. Suited for finishing work. Blade tip is a sharp corner.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	22.27 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

GSX MILL 2-Flute Blade 2D GSX2C-2D

NACHI(FUJIKOSHI)

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	22.27 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

GSX MILL 3-Flute Blade 1.5D GSX3C-1.5D

NACHI(FUJIKOSHI)

Compatible with everything from wet machining of green timber to high speed dry machining of high hardness materials.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	33.21 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

GSX MILL 4-Flute Blade 2.5D GSX4C-2.5D

NACHI(FUJIKOSHI)

Compatible with everything from wet machining of green timber to high speed dry machining of high hardness materials.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	34.30 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

GSX MILL 4-Flute Blade 3D GSX4C-3D

NACHI(FUJIKOSHI)

Compatible with everything from wet machining of green timber to dry machining of high hardness materials.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	28.42 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

GS MILL 2-Flute Blade 2GS

NACHI(FUJIKOSHI)

Supports a wide variety of materials such as green wood and hardened steel. Suited for finishing work.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	23.09 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

GSX MILL 4-Flute Blade 1.5D GSX4C-1.5D

NACHI(FUJIKOSHI)

Compatible with everything from wet machining of green timber to high speed dry machining of high hardness materials.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	34.30 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

GS MILL Slot GSSLT

NACHI(FUJIKOSHI)

Can go from drilling holes to grooving in continuous high efficiency machining. Well suited for small machines and thin lamenates with weak clamping force.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	52.88 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

GSX MILL 2-Flute Blade 3D GSX2C-3D

NACHI(FUJIKOSHI)

Compatible with everything from wet machining of green timber to dry machining of high hardness materials.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	22.27 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

GSX MILL 2-Flute Blade 4D GSX2C-4D

NACHI(FUJIKOSHI)

Compatible with everything from wet machining of green timber to dry machining of high hardness materials.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	38.44 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

GSX MILL 4-Flute Blade 2D GSX4C-2D

NACHI(FUJIKOSHI)

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	29.41 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

GSX MILL 4-Flute Blade 4D GSX4C-4D

NACHI(FUJIKOSHI)

Compatible with everything from wet machining of green timber to dry machining of high hardness materials.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	49.64 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

X's Mill Geo 4XSGEO

NACHI(FUJIKOSHI)

By grooving enables high feed and high efficiency machining. Supports wide range from mold steel to difficult-to-cut materials.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	79.46 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

X's Mill Geo Medium 4GEOM

NACHI(FUJIKOSHI)

Can deal with materials ranging from green timber to high hardness steel.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	94.15 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

X's Mill Geo Long SL4GEO

NACHI(FUJIKOSHI)

Suitable for wide side surfaces and side milling at depth.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	107.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Anchor V 2-Flute 2CE

NACHI(FUJIKOSHI)

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	37.50 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

DLC Mill, Sharp Corner, 2-Flute 2DLCSC

NACHI(FUJIKOSHI)

End-mill for aluminum, copper alloy. Adopts a sharp corner.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	54.03 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

GSX MILL 3-Flute Blade 2D GSX3C-2D

NACHI(FUJIKOSHI)

Compatible with everything from wet machining of green timber to high speed dry machining of high hardness materials.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	33.58 €
Min. Shipping Days ：	Same day

*Unit price with basic configuration

GSX MILL Slot 1.5D GSXSLT-1.5D

NACHI(FUJIKOSHI)

Can go from drilling holes to grooving in continuous high efficiency machining. Well suited for small machines and thin lamenates with weak clamping force.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	45.60 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

GSX MILL 4-Flute Blade 1D GSX4C-1D

NACHI(FUJIKOSHI)

Compatible with everything from wet machining of green timber to high speed dry machining of high hardness materials.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	34.30 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

X's Mill 4-Flute 4PLXS

NACHI(FUJIKOSHI)

Supports a wide variety of materials such as green wood and hardened steel. Suitable for side surface processing.

Volume Discount

Select to compare

› Configure now
Starting from^∗ ：	106.81 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Specifications
Blade diameter (D)(φ)
work material
Blade length (ℓ)(mm)
Number of flutes(sheet)
Type
Coating
Shank diameter (d)(mm)
Overall Length (L)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Blade tip shape
Torsion Angle (θ)

	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)
Product Series	TSC series carbide radius end mill for countersink, 3-flute / short model	Carbide square end mill, 4-flute / 3D Flute Length (regular) model	TSC Series Carbide Roughing End Mill for Stainless Steel Machining	Diamond Coated Carbide Square End Mill for Graphite Machining, 2-Flute / Long Model	Carbide Square End Mill for Graphite Machining, 2-Flute / Non-Coated, Long Model	Diamond Coated Carbide Square End Mill for Graphite Machining, 4-Flute / Long Model	Carbide Square End Mill for Graphite Machining, 4-Flute / Non-Coated, Long Model	Carbide Square End Mill for Resin Machining, 2-Flute / Regular Model	Carbide Square End Mill for Resin Machining, 2-Flute / Extra Long Model	Carbide Square End Mill for Resin Machining, 2-Flute / Regular, Long Shank Model	XAL Series Carbide Square End Mill, 2-Flute / 1.5D Flute Length (Stub) Model	XAL Series Carbide Square End Mill, 2-Flute / 2, 5D Flute Length Model	XAL Series Carbide Square End Mill, 2-Flute / 4D Flute Length (Long) Model	Carbide Blade Neck Relief End Mill, 2-Flute / Short Model	Carbide Blade Neck Relief End Mill, 2-Flute / Regular Model	Non-Coated TS Coated Carbide 0.1 mm Unit Corner C Designated End Mill	Carbide Blade Neck Relief End Mill, 4-Flute / Short Model	Carbide Blade Neck Relief End Mill, 4-Flute / Regular Model	Carbide Square End Mill, 2-Flute / 0.01 mm Designation Model	XCP Coated Carbide Square End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / Stub / Short Type (Gash Land)	XCP Coated Carbide Square End Mill For Tempered Steel / High Hardness Steel Machining / 4-Flute / 2.5D / Regular Type (Gash Land)	DLC Mill Long Sharp Corner, 2-Flute SL2DLCSC	GS MILL 4-Flute Blade 4GS	GSX MILL 2-Flute Blade 2.5D GSX2C-2.5D	GSX MILL 2-Flute Blade 2.5D P Type GSX2P-2.5D	GSX MILL 2-Flute Blade 2D GSX2C-2D	GSX MILL 3-Flute Blade 1.5D GSX3C-1.5D	GSX MILL 4-Flute Blade 2.5D GSX4C-2.5D	GSX MILL 4-Flute Blade 3D GSX4C-3D	GS MILL 2-Flute Blade 2GS	GSX MILL 4-Flute Blade 1.5D GSX4C-1.5D	GS MILL Slot GSSLT	GSX MILL 2-Flute Blade 3D GSX2C-3D	GSX MILL 2-Flute Blade 4D GSX2C-4D	GSX MILL 4-Flute Blade 2D GSX4C-2D	GSX MILL 4-Flute Blade 4D GSX4C-4D	X's Mill Geo 4XSGEO	X's Mill Geo Medium 4GEOM	X's Mill Geo Long SL4GEO	Anchor V 2-Flute 2CE	DLC Mill, Sharp Corner, 2-Flute 2DLCSC	GSX MILL 3-Flute Blade 2D GSX3C-2D	GSX MILL Slot 1.5D GSXSLT-1.5D	GSX MILL 4-Flute Blade 1D GSX4C-1D	X's Mill 4-Flute 4PLXS
Starting from^∗	53.95 € *Unit price with basic configuration Volume Discount	- Volume Discount	81.46 € *Unit price with basic configuration Volume Discount	94.44 € *Unit price with basic configuration Volume Discount	83.60 € *Unit price with basic configuration Volume Discount	94.44 € *Unit price with basic configuration Volume Discount	100.51 € *Unit price with basic configuration Volume Discount	22.54 € *Unit price with basic configuration Volume Discount	25.34 € *Unit price with basic configuration Volume Discount	42.65 € *Unit price with basic configuration Volume Discount	9.15 € *Unit price with basic configuration Volume Discount	10.07 € *Unit price with basic configuration Volume Discount	12.66 € *Unit price with basic configuration Volume Discount	-	-	-	-	-	33.17 € *Unit price with basic configuration Volume Discount	32.31 € *Unit price with basic configuration Volume Discount	25.89 € *Unit price with basic configuration Volume Discount	79.55 € *Unit price with basic configuration Volume Discount	34.34 € *Unit price with basic configuration Volume Discount	22.27 € *Unit price with basic configuration Volume Discount	22.27 € *Unit price with basic configuration Volume Discount	22.27 € *Unit price with basic configuration Volume Discount	33.21 € *Unit price with basic configuration Volume Discount	34.30 € *Unit price with basic configuration Volume Discount	28.42 € *Unit price with basic configuration Volume Discount	23.09 € *Unit price with basic configuration Volume Discount	34.30 € *Unit price with basic configuration Volume Discount	52.88 € *Unit price with basic configuration Volume Discount	22.27 € *Unit price with basic configuration Volume Discount	38.44 € *Unit price with basic configuration Volume Discount	29.41 € *Unit price with basic configuration Volume Discount	49.64 € *Unit price with basic configuration Volume Discount	79.46 € *Unit price with basic configuration Volume Discount	94.15 € *Unit price with basic configuration Volume Discount	107.50 € *Unit price with basic configuration Volume Discount	37.50 € *Unit price with basic configuration Volume Discount	54.03 € *Unit price with basic configuration Volume Discount	33.58 € *Unit price with basic configuration Volume Discount	45.60 € *Unit price with basic configuration Volume Discount	34.30 € *Unit price with basic configuration Volume Discount	106.81 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	5 Days	7 Days	7 Days	7 Days	7 Days	7 Days	7 Days	5 Days	5 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	6 Days	Same day	6 Days	6 Days	6 Days
Specifications	TS General Steel 3 Flutes S (Short)	Non-Coated General Steel 4 Flutes R (Regular)	TS SUS 3 Flutes R (Regular)	DIA Graphite 2 Flutes L (Long)	Non-Coated Graphite 2 Flutes L (Long)	DIA Graphite 4 Flutes L (Long)	Non-Coated Graphite 4 Flutes L (Long)	Non-Coated Resin 2 Flutes R (Regular)	Non-Coated Resin 2 Flutes EXL (Extra Long)	Non-Coated Resin 2 Flutes R (Regular)	XAL General Steel 2 Flutes	XAL General Steel 2 Flutes	XAL General Steel 2 Flutes	General Steel 2 Flutes S (Short)	General Steel 2 Flutes R (Regular)	Non-Coated General Steel	General Steel 4 Flutes S (Short)	General Steel 4 Flutes R (Regular)	Non-Coated General Steel 2 Flutes
Blade diameter (D)(φ)	3 ～ 16	2 ～ 20	6 ～ 20	1 ～ 12	1 ～ 12	2 ～ 12	2 ～ 12	0.3 ～ 16	0.3 ～ 12	1 ～ 10	0.5 ～ 20	1 ～ 12	0.5 ～ 12	6 ～ 12	6 ～ 12	2 ～ 20	6 ～ 12	6 ～ 12	3.15 ～ 19.99	1 ～ 12	1 ～ 16	3 ～ 20	1 ～ 20	0.2 ～ 20	1 ～ 20	1 ～ 20	1 ～ 20	1 ～ 20	1 ～ 20	0.2 ～ 20	1 ～ 20	3 ～ 16	1 ～ 20	1 ～ 20	1 ～ 20	1 ～ 20	2 ～ 32	2 ～ 20	3 ～ 20	1 ～ 20	1 ～ 20	1 ～ 20	1 ～ 16	1 ～ 20	2 ～ 20
work material	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎]	General Steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○/◎] / Aluminum[◎] / Copper[◎] / Resin[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○/◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	General Steel[○] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[◎] / High Hardness Steel: to HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	Aluminum[◎] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Titanium[◎]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	General Steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	General Steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[◎] / High Hardness Steel: to HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]	Quenched and tempered steel[◎] / High Hardness Steel: to HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]
Blade length (ℓ)(mm)	8 ～ 32	5 ～ 60	15 ～ 50	5 ～ 60	5 ～ 60	10 ～ 60	10 ～ 60	0.9 ～ 48	1.5 ～ 48	3 ～ 20	0.75 ～ 30	2.5 ～ 30	2 ～ 48	-	-	3 ～ 60	-	-	3.5 ～ 48	2 ～ 24	2.5 ～ 40	12 ～ 56	2.5 ～ 38	0.5 ～ 50	2.5 ～ 50	2 ～ 40	1.5 ～ 30	2.5 ～ 50	3 ～ 60	0.4 ～ 38	1.5 ～ 30	8 ～ 32	3 ～ 60	4 ～ 80	2 ～ 40	4 ～ 80	6 ～ 70	10 ～ 56	18 ～ 75	3 ～ 38	3 ～ 38	2.5 ～ 40	1.5 ～ 24	1 ～ 20	6 ～ 38
Number of flutes(sheet)	3	4	3	2	2	4	4	2	2	2	2	2	2	2	2	2 ～ 4	4	4	2	4	4	2	4	2	2	2	3	4	4	2	4	3	2	2	4	4	4	4	4	2	2	3	3	4	4
Type	Square	Square	Roughing	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Coating	For High Hardness (Silicon Group)	Non-Coated	For High Hardness (Silicon Group)	Dia Coat	Non-Coated	Dia Coat	Non-Coated	Non-Coated	Non-Coated	Non-Coated	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	Non-Coated	Non-Coated	For High Hardness (Silicon Group) / Non-Coated	Non-Coated	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	DLC	TiAlN	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiAlN	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiAlN	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiAlN	TiAlN	TiAlN	TiAlN	-	DLC	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	TiAlN
Shank diameter (d)(mm)	6 ～ 16	4 ～ 20	6 ～ 20	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	3 ～ 16	3 ～ 12	1 ～ 10	4 ～ 20	4 ～ 12	4 ～ 12	6 ～ 12	6 ～ 12	4 ～ 20	6 ～ 12	6 ～ 12	6 ～ 20	3 ～ 12	3 ～ 16	6 ～ 20	3 ～ 20	4 ～ 20	4 ～ 20	4 ～ 20	4 ～ 20	4 ～ 20	4 ～ 20	3 ～ 20	4 ～ 20	6 ～ 16	4 ～ 20	4 ～ 20	4 ～ 20	4 ～ 20	4 ～ 32	4 ～ 20	6 ～ 20	4 ～ 20	4 ～ 20	4 ～ 20	4 ～ 16	4 ～ 20	4 ～ 20
Overall Length (L)(mm)	50 ～ 110	45 ～ 130	60 ～ 130	75 ～ 200	75 ～ 200	75 ～ 200	75 ～ 200	45 ～ 110	40 ～ 110	65 ～ 180	40 ～ 110	45 ～ 85	45 ～ 100	45 ～ 75	60 ～ 85	40 ～ 130	45 ～ 75	60 ～ 85	40 ～ 105	40 ～ 75	40 ～ 120	50 ～ 125	38 ～ 100	40 ～ 100	40 ～ 100	40 ～ 100	40 ～ 100	40 ～ 100	40 ～ 120	38 ～ 100	40 ～ 100	50 ～ 115	40 ～ 120	40 ～ 140	40 ～ 100	40 ～ 140	50 ～ 175	50 ～ 125	60 ～ 155	50 ～ 100	40 ～ 100	40 ～ 100	40 ～ 90	40 ～ 100	40 ～ 100
Underneck length (ℓ1)(mm)	-	23 ～ 92	-	10 ～ 85	10 ～ 85	20 ～ 85	20 ～ 85	-	-	-	-	-	-	-	-	-	-	-	-	5 ～ 25	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Machining Application	Plane / Side / Groove / Inclined Cuts / Countersinking	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove	Plane / Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side	Plane / Side	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts
Blade tip shape	Sharp Edge	Sharp Edge / With Lead	C plane	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	Sharp Edge	-	Sharp Edge	Sharp Edge / With Lead	Sharp Edge / With Lead	Sharp Edge / With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	Sharp Edge / With Lead	With Lead	With Lead	Sharp Edge	Sharp Edge	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	Sharp Edge	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	With Lead	Sharp Edge	Sharp Edge	With Lead	With Lead	With Lead	Sharp Edge
Torsion Angle (θ)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)	Standard Helix (30˚ to 40˚)

Filter by:

Stock

- Show only stock items
Clear

Blade diameter (D)(φ)
- 0.01～0.99
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.05
  - 0.06
  - 0.07
  - 0.08
  - 0.09
  - 0.1
  - 0.11
  - 0.12
  - 0.13
  - 0.14
  - 0.15
  - 0.16
  - 0.17
  - 0.18
  - 0.19
  - 0.2
  - 0.21
  - 0.22
  - 0.23
  - 0.24
  - 0.25
  - 0.26
  - 0.27
  - 0.28
  - 0.29
  - 0.3
  - 0.31
  - 0.32
  - 0.33
  - 0.34
  - 0.35
  - 0.36
  - 0.37
  - 0.38
  - 0.39
  - 0.4
  - 0.41
  - 0.42
  - 0.43
  - 0.44
  - 0.45
  - 0.46
  - 0.47
  - 0.48
  - 0.49
  - 0.5
  - 0.51
  - 0.52
  - 0.53
  - 0.54
  - 0.55
  - 0.56
  - 0.57
  - 0.58
  - 0.59
  - 0.6
  - 0.61
  - 0.62
  - 0.63
  - 0.64
  - 0.65
  - 0.66
  - 0.67
  - 0.68
  - 0.69
  - 0.7
  - 0.71
  - 0.72
  - 0.73
  - 0.74
  - 0.75
  - 0.76
  - 0.77
  - 0.78
  - 0.79
  - 0.8
  - 0.81
  - 0.82
  - 0.83
  - 0.84
  - 0.85
  - 0.86
  - 0.87
  - 0.88
  - 0.89
  - 0.9
  - 0.91
  - 0.92
  - 0.93
  - 0.94
  - 0.95
  - 0.96
  - 0.97
  - 0.98
  - 0.99
- 1～1.99
  - 1
  - 1.01
  - 1.02
  - 1.03
  - 1.04
  - 1.05
  - 1.06
  - 1.07
  - 1.08
  - 1.09
  - 1.1
  - 1.11
  - 1.12
  - 1.13
  - 1.14
  - 1.15
  - 1.16
  - 1.17
  - 1.18
  - 1.19
  - 1.2
  - 1.21
  - 1.22
  - 1.23
  - 1.24
  - 1.25
  - 1.26
  - 1.27
  - 1.28
  - 1.29
  - 1.3
  - 1.31
  - 1.32
  - 1.33
  - 1.34
  - 1.35
  - 1.36
  - 1.37
  - 1.38
  - 1.39
  - 1.4
  - 1.41
  - 1.42
  - 1.43
  - 1.44
  - 1.45
  - 1.46
  - 1.47
  - 1.48
  - 1.49
  - 1.5
  - 1.51
  - 1.52
  - 1.53
  - 1.54
  - 1.55
  - 1.56
  - 1.57
  - 1.58
  - 1.59
  - 1.6
  - 1.61
  - 1.62
  - 1.63
  - 1.64
  - 1.65
  - 1.66
  - 1.67
  - 1.68
  - 1.69
  - 1.7
  - 1.71
  - 1.72
  - 1.73
  - 1.74
  - 1.75
  - 1.76
  - 1.77
  - 1.78
  - 1.79
  - 1.8
  - 1.81
  - 1.82
  - 1.83
  - 1.84
  - 1.85
  - 1.86
  - 1.87
  - 1.88
  - 1.89
  - 1.9
  - 1.91
  - 1.92
  - 1.93
  - 1.94
  - 1.95
  - 1.96
  - 1.97
  - 1.98
  - 1.99
- 2～2.99
  - 2
  - 2.01
  - 2.02
  - 2.03
  - 2.04
  - 2.05
  - 2.06
  - 2.07
  - 2.08
  - 2.09
  - 2.1
  - 2.11
  - 2.12
  - 2.13
  - 2.14
  - 2.15
  - 2.16
  - 2.17
  - 2.18
  - 2.19
  - 2.2
  - 2.21
  - 2.22
  - 2.23
  - 2.24
  - 2.25
  - 2.26
  - 2.27
  - 2.28
  - 2.29
  - 2.3
  - 2.31
  - 2.32
  - 2.33
  - 2.34
  - 2.35
  - 2.36
  - 2.37
  - 2.38
  - 2.39
  - 2.4
  - 2.41
  - 2.42
  - 2.43
  - 2.44
  - 2.45
  - 2.46
  - 2.47
  - 2.48
  - 2.49
  - 2.5
  - 2.51
  - 2.52
  - 2.53
  - 2.54
  - 2.55
  - 2.56
  - 2.57
  - 2.58
  - 2.59
  - 2.6
  - 2.61
  - 2.62
  - 2.63
  - 2.64
  - 2.65
  - 2.66
  - 2.67
  - 2.68
  - 2.69
  - 2.7
  - 2.71
  - 2.72
  - 2.73
  - 2.74
  - 2.75
  - 2.76
  - 2.77
  - 2.78
  - 2.79
  - 2.8
  - 2.81
  - 2.82
  - 2.83
  - 2.84
  - 2.85
  - 2.86
  - 2.87
  - 2.88
  - 2.89
  - 2.9
  - 2.91
  - 2.92
  - 2.93
  - 2.94
  - 2.95
  - 2.96
  - 2.97
  - 2.98
  - 2.99
- 3～3.99
  - 3
  - 3.01
  - 3.02
  - 3.03
  - 3.04
  - 3.05
  - 3.06
  - 3.07
  - 3.08
  - 3.09
  - 3.1
  - 3.11
  - 3.12
  - 3.13
  - 3.14
  - 3.15
  - 3.16
  - 3.17
  - 3.175
  - 3.18
  - 3.19
  - 3.2
  - 3.21
  - 3.22
  - 3.23
  - 3.24
  - 3.25
  - 3.26
  - 3.27
  - 3.28
  - 3.29
  - 3.3
  - 3.31
  - 3.32
  - 3.33
  - 3.34
  - 3.35
  - 3.36
  - 3.37
  - 3.38
  - 3.39
  - 3.4
  - 3.41
  - 3.42
  - 3.43
  - 3.44
  - 3.45
  - 3.46
  - 3.47
  - 3.48
  - 3.49
  - 3.5
  - 3.51
  - 3.52
  - 3.53
  - 3.54
  - 3.55
  - 3.56
  - 3.57
  - 3.58
  - 3.59
  - 3.6
  - 3.61
  - 3.62
  - 3.63
  - 3.64
  - 3.65
  - 3.66
  - 3.67
  - 3.68
  - 3.69
  - 3.7
  - 3.71
  - 3.72
  - 3.73
  - 3.74
  - 3.75
  - 3.76
  - 3.77
  - 3.78
  - 3.79
  - 3.8
  - 3.81
  - 3.82
  - 3.83
  - 3.84
  - 3.85
  - 3.86
  - 3.87
  - 3.88
  - 3.89
  - 3.9
  - 3.91
  - 3.92
  - 3.93
  - 3.94
  - 3.95
  - 3.96
  - 3.97
  - 3.98
  - 3.99
- 4～4.99
  - 4
  - 4.01
  - 4.02
  - 4.03
  - 4.04
  - 4.05
  - 4.06
  - 4.07
  - 4.08
  - 4.09
  - 4.1
  - 4.11
  - 4.12
  - 4.13
  - 4.14
  - 4.15
  - 4.16
  - 4.17
  - 4.18
  - 4.19
  - 4.2
  - 4.21
  - 4.22
  - 4.23
  - 4.24
  - 4.25
  - 4.26
  - 4.27
  - 4.28
  - 4.29
  - 4.3
  - 4.31
  - 4.32
  - 4.33
  - 4.34
  - 4.35
  - 4.36
  - 4.37
  - 4.38
  - 4.39
  - 4.4
  - 4.41
  - 4.42
  - 4.43
  - 4.44
  - 4.45
  - 4.46
  - 4.47
  - 4.48
  - 4.49
  - 4.5
  - 4.51
  - 4.52
  - 4.53
  - 4.54
  - 4.55
  - 4.56
  - 4.57
  - 4.58
  - 4.59
  - 4.6
  - 4.61
  - 4.62
  - 4.63
  - 4.64
  - 4.65
  - 4.66
  - 4.67
  - 4.68
  - 4.69
  - 4.7
  - 4.71
  - 4.72
  - 4.73
  - 4.74
  - 4.75
  - 4.76
  - 4.77
  - 4.78
  - 4.79
  - 4.8
  - 4.81
  - 4.82
  - 4.83
  - 4.84
  - 4.85
  - 4.86
  - 4.87
  - 4.88
  - 4.89
  - 4.9
  - 4.91
  - 4.92
  - 4.93
  - 4.94
  - 4.95
  - 4.96
  - 4.97
  - 4.98
  - 4.99
- 5～5.99
  - 5
  - 5.01
  - 5.02
  - 5.03
  - 5.04
  - 5.05
  - 5.06
  - 5.07
  - 5.08
  - 5.09
  - 5.1
  - 5.11
  - 5.12
  - 5.13
  - 5.14
  - 5.15
  - 5.16
  - 5.17
  - 5.18
  - 5.19
  - 5.2
  - 5.21
  - 5.22
  - 5.23
  - 5.24
  - 5.25
  - 5.26
  - 5.27
  - 5.28
  - 5.29
  - 5.3
  - 5.31
  - 5.32
  - 5.33
  - 5.34
  - 5.35
  - 5.36
  - 5.37
  - 5.38
  - 5.39
  - 5.4
  - 5.41
  - 5.42
  - 5.43
  - 5.44
  - 5.45
  - 5.46
  - 5.47
  - 5.48
  - 5.49
  - 5.5
  - 5.51
  - 5.52
  - 5.53
  - 5.54
  - 5.55
  - 5.56
  - 5.57
  - 5.58
  - 5.59
  - 5.6
  - 5.61
  - 5.62
  - 5.63
  - 5.64
  - 5.65
  - 5.66
  - 5.67
  - 5.68
  - 5.69
  - 5.7
  - 5.71
  - 5.72
  - 5.73
  - 5.74
  - 5.75
  - 5.76
  - 5.77
  - 5.78
  - 5.79
  - 5.8
  - 5.81
  - 5.82
  - 5.83
  - 5.84
  - 5.85
  - 5.86
  - 5.87
  - 5.88
  - 5.89
  - 5.9
  - 5.91
  - 5.92
  - 5.93
  - 5.94
  - 5.95
  - 5.96
  - 5.97
  - 5.98
  - 5.99
- 6～6.9
  - 6
  - 6.01
  - 6.05
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.57
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.99
  - 7
  - 7.01
  - 7.02
  - 7.03
  - 7.04
  - 7.05
  - 7.06
  - 7.07
  - 7.08
  - 7.09
  - 7.1
  - 7.11
  - 7.12
  - 7.13
  - 7.14
  - 7.15
  - 7.16
  - 7.17
  - 7.18
  - 7.19
  - 7.2
  - 7.21
  - 7.22
  - 7.23
  - 7.24
  - 7.25
  - 7.26
  - 7.27
  - 7.28
  - 7.29
  - 7.3
  - 7.31
  - 7.32
  - 7.33
  - 7.34
  - 7.35
  - 7.36
  - 7.37
  - 7.38
  - 7.39
  - 7.4
  - 7.41
  - 7.42
  - 7.43
  - 7.44
  - 7.45
  - 7.46
  - 7.47
  - 7.48
  - 7.49
  - 7.5
  - 7.51
  - 7.52
  - 7.53
  - 7.54
  - 7.55
  - 7.56
  - 7.57
  - 7.58
  - 7.59
  - 7.6
  - 7.61
  - 7.62
  - 7.63
  - 7.64
  - 7.65
  - 7.66
  - 7.67
  - 7.68
  - 7.69
  - 7.7
  - 7.71
  - 7.72
  - 7.73
  - 7.74
  - 7.75
  - 7.76
  - 7.77
  - 7.78
  - 7.79
  - 7.8
  - 7.81
  - 7.82
  - 7.83
  - 7.84
  - 7.85
  - 7.86
  - 7.87
  - 7.88
  - 7.89
  - 7.9
  - 7.91
  - 7.92
  - 7.93
  - 7.94
  - 7.95
  - 7.96
  - 7.97
  - 7.98
  - 7.99
- 8～8.9
  - 8
  - 8.01
  - 8.02
  - 8.1
  - 8.15
  - 8.2
  - 8.21
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.75
  - 8.8
  - 8.9
- 9～9.99
  - 9
  - 9.01
  - 9.02
  - 9.03
  - 9.04
  - 9.05
  - 9.06
  - 9.07
  - 9.08
  - 9.09
  - 9.1
  - 9.11
  - 9.12
  - 9.13
  - 9.14
  - 9.15
  - 9.16
  - 9.17
  - 9.18
  - 9.19
  - 9.2
  - 9.21
  - 9.22
  - 9.23
  - 9.24
  - 9.25
  - 9.26
  - 9.27
  - 9.28
  - 9.29
  - 9.3
  - 9.31
  - 9.32
  - 9.33
  - 9.34
  - 9.35
  - 9.36
  - 9.37
  - 9.38
  - 9.39
  - 9.4
  - 9.41
  - 9.42
  - 9.43
  - 9.44
  - 9.45
  - 9.46
  - 9.47
  - 9.48
  - 9.49
  - 9.5
  - 9.51
  - 9.52
  - 9.53
  - 9.54
  - 9.55
  - 9.56
  - 9.57
  - 9.58
  - 9.59
  - 9.6
  - 9.61
  - 9.62
  - 9.63
  - 9.64
  - 9.65
  - 9.66
  - 9.67
  - 9.68
  - 9.69
  - 9.7
  - 9.71
  - 9.72
  - 9.73
  - 9.74
  - 9.75
  - 9.76
  - 9.77
  - 9.78
  - 9.79
  - 9.8
  - 9.81
  - 9.82
  - 9.83
  - 9.84
  - 9.85
  - 9.86
  - 9.87
  - 9.88
  - 9.89
  - 9.9
  - 9.91
  - 9.92
  - 9.93
  - 9.94
  - 9.95
  - 9.96
  - 9.97
  - 9.98
  - 9.99
- 10～10.9
  - 10
  - 10.1
  - 10.15
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.99
  - 11
  - 11.01
  - 11.02
  - 11.03
  - 11.04
  - 11.05
  - 11.06
  - 11.07
  - 11.08
  - 11.09
  - 11.1
  - 11.11
  - 11.12
  - 11.13
  - 11.14
  - 11.15
  - 11.16
  - 11.17
  - 11.18
  - 11.19
  - 11.2
  - 11.21
  - 11.22
  - 11.23
  - 11.24
  - 11.25
  - 11.26
  - 11.27
  - 11.28
  - 11.29
  - 11.3
  - 11.31
  - 11.32
  - 11.33
  - 11.34
  - 11.35
  - 11.36
  - 11.37
  - 11.38
  - 11.39
  - 11.4
  - 11.41
  - 11.42
  - 11.43
  - 11.44
  - 11.45
  - 11.46
  - 11.47
  - 11.48
  - 11.49
  - 11.5
  - 11.51
  - 11.52
  - 11.53
  - 11.54
  - 11.55
  - 11.56
  - 11.57
  - 11.58
  - 11.59
  - 11.6
  - 11.61
  - 11.62
  - 11.63
  - 11.64
  - 11.65
  - 11.66
  - 11.67
  - 11.68
  - 11.69
  - 11.7
  - 11.71
  - 11.72
  - 11.73
  - 11.74
  - 11.75
  - 11.76
  - 11.77
  - 11.78
  - 11.79
  - 11.8
  - 11.81
  - 11.82
  - 11.83
  - 11.84
  - 11.85
  - 11.86
  - 11.87
  - 11.88
  - 11.89
  - 11.9
  - 11.91
  - 11.92
  - 11.93
  - 11.94
  - 11.95
  - 11.96
  - 11.97
  - 11.98
  - 11.99
- 12～12.9
  - 12
  - 12.1
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.9
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.9
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.99
  - 15
  - 15.1
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.51
  - 15.52
  - 15.53
  - 15.54
  - 15.55
  - 15.56
  - 15.57
  - 15.58
  - 15.59
  - 15.6
  - 15.61
  - 15.62
  - 15.63
  - 15.64
  - 15.65
  - 15.66
  - 15.67
  - 15.68
  - 15.69
  - 15.7
  - 15.71
  - 15.72
  - 15.73
  - 15.74
  - 15.75
  - 15.76
  - 15.77
  - 15.78
  - 15.79
  - 15.8
  - 15.81
  - 15.82
  - 15.83
  - 15.84
  - 15.85
  - 15.86
  - 15.87
  - 15.88
  - 15.89
  - 15.9
  - 15.91
  - 15.92
  - 15.93
  - 15.94
  - 15.95
  - 15.96
  - 15.97
  - 15.98
  - 15.99
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.7
  - 18.8
  - 18.9
- 19～19.99
  - 19
  - 19..5
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.51
  - 19.52
  - 19.53
  - 19.54
  - 19.55
  - 19.56
  - 19.57
  - 19.58
  - 19.59
  - 19.6
  - 19.61
  - 19.62
  - 19.63
  - 19.64
  - 19.65
  - 19.66
  - 19.67
  - 19.68
  - 19.69
  - 19.7
  - 19.71
  - 19.72
  - 19.73
  - 19.74
  - 19.75
  - 19.76
  - 19.77
  - 19.78
  - 19.79
  - 19.8
  - 19.81
  - 19.82
  - 19.83
  - 19.84
  - 19.85
  - 19.86
  - 19.87
  - 19.88
  - 19.89
  - 19.9
  - 19.91
  - 19.92
  - 19.93
  - 19.94
  - 19.95
  - 19.96
  - 19.97
  - 19.98
  - 19.99
- 20～20.5
  - 20
  - 20.5
- 21～21.5
  - 21
  - 21.5
- 22～22.5
  - 22
  - 22.5
- 23～23.5
  - 23
  - 23.5
- 24～24.5
  - 24
  - 24.5
- 25～25.5
  - 25
  - 25.5
- 26～26.5
  - 26
  - 26.5
- 27～27.5
  - 27
  - 27.5
- 28～28.5
  - 28
  - 28.5
- 29～29.5
  - 29
  - 29.5
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
Drawing

Clear

work material
- General Steel
- Quenched and tempered steel
- High Hardness Steel: to HRC55
- High Hardness Steel: to HRC60
- High Hardness Steel: to HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Blade length (ℓ)(mm)
- 0.01～0.9
  - 0.01
  - 0.02
  - 0.03
  - 0.04
  - 0.045
  - 0.05
  - 0.06
  - 0.07
  - 0.075
  - 0.08
  - 0.09
  - 0.1
  - 0.105
  - 0.12
  - 0.135
  - 0.15
  - 0.16
  - 0.2
  - 0.23
  - 0.24
  - 0.25
  - 0.3
  - 0.32
  - 0.4
  - 0.45
  - 0.5
  - 0.6
  - 0.7
  - 0.75
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1.05
  - 1.1
  - 1.2
  - 1.25
  - 1.3
  - 1.35
  - 1.4
  - 1.5
  - 1.6
  - 1.7
  - 1.75
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.25
  - 2.3
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.96
  - 3
  - 3.1
  - 3.18
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.75
  - 3.8
  - 3.9
  - 3.96
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.78
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5.1
  - 5.2
  - 5.25
  - 5.3
  - 5.4
  - 5.5
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.1
  - 6.2
  - 6.25
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.75
  - 6.8
  - 6.9
- 7～7.9
  - 7
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.25
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.52
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.49
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12～12.9
  - 12
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.8
  - 12.9
- 13～13.8
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.9
  - 15
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.6
  - 15.8
  - 15.9
- 16～16.8
  - 16
  - 16.2
  - 16.4
  - 16.5
  - 16.6
  - 16.8
- 17～17.8
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.5
  - 17.6
  - 17.7
  - 17.8
- 18～18.8
  - 18
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.8
- 19～19.8
  - 19
  - 19.2
  - 19.4
  - 19.5
  - 19.6
  - 19.8
- 20～20.8
  - 20
  - 20.1
  - 20.2
  - 20.3
  - 20.4
  - 20.5
  - 20.6
  - 20.7
  - 20.8
- 21～21.9
  - 21
  - 21.2
  - 21.3
  - 21.4
  - 21.5
  - 21.6
  - 21.8
  - 21.9
- 22～22.8
  - 22
  - 22.2
  - 22.4
  - 22.5
  - 22.6
  - 22.8
- 23～23.8
  - 23
  - 23.1
  - 23.2
  - 23.3
  - 23.4
  - 23.5
  - 23.6
  - 23.8
- 24～24.9
  - 24
  - 24.2
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.8
  - 24.9
- 25～25.8
  - 25
  - 25.2
  - 25.4
  - 25.5
  - 25.6
  - 25.8
- 26～26.8
  - 26
  - 26.2
  - 26.4
  - 26.5
  - 26.6
  - 26.7
  - 26.8
- 27～27.9
  - 27
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.8
  - 27.9
- 28～28.8
  - 28
  - 28.2
  - 28.4
  - 28.5
  - 28.8
- 29～29.8
  - 29
  - 29.1
  - 29.2
  - 29.5
  - 29.6
  - 29.7
  - 29.8
- 30～30.9
  - 30
  - 30.3
  - 30.4
  - 30.5
  - 30.6
  - 30.8
  - 30.9
- 31～31.8
  - 31
  - 31.2
  - 31.5
  - 31.6
  - 31.8
- 32～32.8
  - 32
  - 32.1
  - 32.4
  - 32.5
  - 32.7
  - 32.8
- 33～33.9
  - 33
  - 33.2
  - 33.3
  - 33.6
  - 33.9
- 34～34.8
  - 34
  - 34.2
  - 34.4
  - 34.5
  - 34.8
- 35～35.8
  - 35
  - 35.1
  - 35.2
  - 35.4
  - 35.5
  - 35.6
  - 35.7
  - 35.8
- 36～36.8
  - 36
  - 36.4
  - 36.5
  - 36.8
- 37～37.6
  - 37
  - 37.2
  - 37.5
  - 37.6
- 38～38.8
  - 38
  - 38.4
  - 38.5
  - 38.8
- 39～39.6
  - 39
  - 39.2
  - 39.5
  - 39.6
- 40～40.8
  - 40
  - 40.4
  - 40.5
  - 40.8
- 41～41.6
  - 41
  - 41.2
  - 41.5
  - 41.6
- 42～42.8
  - 42
  - 42.4
  - 42.5
  - 42.8
- 43～43.6
  - 43
  - 43.2
  - 43.5
  - 43.6
- 44～44.8
  - 44
  - 44.4
  - 44.5
  - 44.8
- 45～45.5
  - 45
  - 45.2
  - 45.5
- 46～46.8
  - 46
  - 46.4
  - 46.5
  - 46.8
- 47～47.8
  - 47
  - 47.2
  - 47.5
  - 47.6
  - 47.8
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.5
  - 50
  - 50.5
- 51～51.5
  - 51
  - 51.5
- 52
- 53～53.5
  - 53
  - 53.5
- 54～54.5
  - 54
  - 54.5
- 55～55.5
  - 55
  - 55.5
- 56
- 57.5
- 58～58.5
  - 58
  - 58.5
- 59～59.5
  - 59
  - 59.5
- 60～60.5
  - 60
  - 60.5
- 63
- 64
- 65
- 67
- 70～70.5
  - 70
  - 70.5
- 75
- 80
- 83
- 85
- 90
- 95
- 100
- 103
- 106
- 110
- 112
- 120
- 130
- 150
- 200
[4-60/1mm Unit(s)]

Drawing

Clear

Number of flutes(sheet)
1

2

3

4

5

6

8

10

12

14

16
Clear

Type
- Square
- Roughing
- Long-Neck Square
- High Helical
Clear

Coating
- For High Hardness (Silicon Group)
- TiAlN
- For General Steels (AlCrN, etc.)
- TiCN
- DLC
- CrN
- Dia Coat
- Non-Coated
- DG
Details

Clear

Shank diameter (d)(mm)
1

1.5

2

2.9

3

3.175

3.8

4

4.8

5

5.8

6

6.35

7

7.8

8

9

9.53

9.7

10

11

11.7

12

13

14

15

15.5

15.7

16

17

18

19.3

19.7

20

24.2

25

30

32

42
Drawing

Clear

Overall Length (L)(mm)
30

35

36

37

38

38.1

39

40

42

43

45

48

49

50

51

52

53

54

55

57

58

60

62

63

63.5

65

66

67

68

70

72

73

74

75

76

78

79

80

82

83

84

85

86

87

88

89

90

92

93

95

97

99

100

104

105

107

108

109

110

111

112

113

115

118

120

121

123

124

125

126

128

130

135

140

145

150

155

156

160

165

170

175

180

190

200

210

220

225

230

240

250

260

270

280

300

310

320

350
Drawing

Clear

Underneck length (ℓ1)(mm)
- 0.1～0.8
  - 0.1
  - 0.2
  - 0.3
  - 0.4
  - 0.5
  - 0.6
  - 0.75
  - 0.8
- 1～1.8
  - 1
  - 1.2
  - 1.25
  - 1.5
  - 1.6
  - 1.8
- 2～2.5
  - 2
  - 2.4
  - 2.5
- 3～3.8
  - 3
  - 3.2
  - 3.5
  - 3.8
- 4～4.5
  - 4
  - 4.5
- 5
- 6
- 7.5
- 8
- 9～9.5
  - 9
  - 9.5
- 10～10.5
  - 10
  - 10.5
- 12～12.5
  - 12
  - 12.5
- 13～13.5
  - 13
  - 13.5
- 14
- 15
- 16～16.5
  - 16
  - 16.5
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 58
- 60
- 62
- 64
- 65
- 66
- 67
- 70
- 74
- 76
- 79
- 80
- 82
- 85
- 94
- 99
- 100
- 120
- 125
- 130
- 150
- 200
[15-92/1mm Unit(s)]

Drawing

Clear