Single Axis Actuators（Table：Long 1 pc.）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
› Configure now
Min. Shipping Days ： 8 Days -
› Configure now
Min. Shipping Days ： 8 Days -
› Configure now
Min. Shipping Days ： 8 Days -
› Configure now
Min. Shipping Days ： 8 Days -
› Configure now
Min. Shipping Days ： 8 Days -
› Configure now
Min. Shipping Days ： 8 Days -
Actuator KR20
THK
With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.
[Features]
[5 custom made]
・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products
・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance
・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tab- 2D / 3D CAD data available
› Configure nowMin. Shipping Days ： 23 Days -
Actuator KR45H
THK
With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.
[Features]
[5 custom made]
・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products
・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance
・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tab- 2D / 3D CAD data available
› Configure nowMin. Shipping Days ： 23 Days -
Actuator SKR26
THK
With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.
[Features]
[5 custom made]
・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products
・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance
・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tab- 2D / 3D CAD data available
› Configure nowMin. Shipping Days ： 23 Days -
Actuator KR26
THK
An actuator with a compact and high-stiffness structure that integrates an LM guide, ball screw, and support unit, making it ideal for high-precision positioning.
[Features]
・ In addition to the standard specifications, the manufacturer will semi-order 5 highly requested customs, and will promptly procure and ship after ordering.
[5 custom made]
・ Dowel holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products.
・ Positioning Metal Bolt: Install the positioning metal bolts for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor.
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover.
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance.
・ AFF grease for clean environment: Encloses clean environment-friendly grease (THK, AFF grease) to suppress dust generation.
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tab.- 2D / 3D CAD data available
› Configure nowMin. Shipping Days ： 23 Days -
› Configure now
Min. Shipping Days ： 8 Days -
Actuator Unit
IMAO CORPORATION
The main body combines stable sliding with T-grooves on three faces for easy mounting, achieving the optimal cross-section shape with maximum strength. The slide mechanism uses materials with excellent abrasion resistance and self-lubrication, and is usable long-term for loads from top, bottom, left, and right.- Volume Discount
- 2D CAD data available
› Configure nowStarting from∗ ： 232.29 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Actuator KR30H
THK
With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.
[Features]
[5 custom made]
・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products
・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance
・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tab- 2D / 3D CAD data available
› Configure nowMin. Shipping Days ： 23 Days -
Actuator SKR20
THK
With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.
[Features]
[5 custom made]
・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products
・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance
・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tab- 2D / 3D CAD data available
› Configure nowMin. Shipping Days ： 23 Days -
Actuator SKR33
THK
With a compact and highly stiff structure that integrates the LM guide, ball screw, and support unit, 5 semi-custom made actuators ideal for high accurate positioning are available.
[Features]
[5 custom made]
・ Dowel Holes: Dowel holes are provided for alignment during assembly. It is also useful for preventing misalignment and reproducibility when replacing products
・ Positioning metal bolt: Positioning metal bolts are installed for origin alignment during assembly. It is also useful for reproducibility of the origin position when replacing the motor
・ Sub-table side greasing hole: By processing a grease hole on the side of the sub table and attaching a grease fitting, greasing is possible without removing the cover
・ AP-C processing: Surface treatment (THK, AP-C treatment) is applied to improve corrosion resistance
・ AFF grease for clean environment: THK and AFF grease are sealed for a clean environment to suppress dust generation
[Selection of sensors and sensor rails]
・ Please refer to the selection list on the "Product Information" tab- 2D / 3D CAD data available
› Configure nowMin. Shipping Days ： 23 Days -
Actuator Unit (Link Type)
IMAO CORPORATION
The main body combines stable sliding with T-grooves on three faces for easy mounting, achieving the optimal cross-section shape with maximum strength. The slide mechanism uses materials with excellent abrasion resistance and self-lubrication, and is usable long-term for loads from top, bottom, left, and right.- 2D CAD data available
› Configure nowStarting from∗ ： 249.90 € Min. Shipping Days ： 26 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Main Body/Peripheral Components |
| Nominal (Height) |
| Accuracy |
| Table |
| Lead(mm) |
| Motor Mounting Posture |
| Cover |
| Grease |
| The presence or absence of motor |
| With or w/o Lubrication Units |
| With or without retainer |
| The shaft diameter of a ball screw(φ) |
| Table length L1(mm) |
| Table width W1(mm) |
| Amplifier Voltage |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | THK | THK | THK | THK | MISUMI | IMAO CORPORATION | THK | THK | THK | IMAO CORPORATION |
| Product Series | ||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Starting from∗ | - | - | - | - | - | - | - | - | - | - | - | 232.29 € *Unit price with basic configuration Volume Discount | - | - | - | 249.90 € *Unit price with basic configuration |
| Min. Shipping Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 23 Days | 23 Days | 23 Days | 23 Days | 8 Days | 8 Days | 23 Days | 23 Days | 23 Days | 26 Days |
| Main Body/Peripheral Components | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body | Main Body |
| Nominal (Height) | 30 / 40 | 20 / 27 | 15 / 21 | 26 | 30 / 40 | 45 / 57 | 20 | 45 | 26 | 26 | 45 / 57 | 58 | 30 | 20 | 33 | 58 |
| Accuracy | High Grade / Precision Grade | High Grade / Precision Grade | High Grade / Precision Grade | High Grade / Precision Grade | High Grade | High Grade / Precision Grade | Standard Grade | Standard Grade | Standard Grade | Standard Grade | High Grade | - | Standard Grade | Standard Grade | Standard Grade | - |
| Table | Long 1 pc. | Long 1 pc. | Long 1 pc. | Long 1 pc. | Long 1 pc. | Long 1 pc. | Long 1 pc. | Long 1 pc. | Long 1 pc. | Long 1 pc. | Long 1 pc. | Long 1 pc. | Long 1 pc. | Long 1 pc. | Long 1 pc. | Long 1 pc. |
| Lead(mm) | 5 ～ 10 | 1 ～ 5 | 2 | 2 ～ 10 | 5 ～ 10 | 10 ～ 20 | 1 ～ 6 | 10 ～ 20 | 2 ～ 6 | 2 ～ 6 | 10 ～ 20 | 3 | 6 ～ 10 | 1 ～ 6 | 6 ～ 20 | 3 |
| Motor Mounting Posture | Straight | Straight | Straight | Straight | Folding back | Straight | Straight / Folding back | Straight / Folding back | Straight / Folding back | Straight / Folding back | Folding back | Straight | Straight / Folding back | Straight / Folding back | Straight / Folding back | Straight |
| Cover | N/A / Available | N/A / Available | N/A / Available | N/A / Available | N/A / Available | N/A / Available | N/A / Available | N/A / Available | N/A / Available | N/A / Available | N/A / Available | Available | N/A / Available | N/A / Available | N/A / Available | Available |
| Grease | Standard / Low Dust Generation | Standard / Low Dust Generation | Standard / Low Dust Generation | Standard / Low Dust Generation | Standard | Standard / Low Dust Generation | Standard / Low Dust Generation | Standard / Low Dust Generation | Standard / Low Dust Generation | Standard / Low Dust Generation | Standard | Standard | Standard / Low Dust Generation | Standard / Low Dust Generation | Standard / Low Dust Generation | Standard |
| The presence or absence of motor | No (Built-in by the customer) | No (Built-in by the customer) | No (Built-in by the customer) | No (Built-in by the customer) | No (Built-in by the customer) | No (Built-in by the customer) | No (Built-in by the customer) | No (Built-in by the customer) | No (Built-in by the customer) | No (Built-in by the customer) | No (Built-in by the customer) | No (Built-in by the customer) | No (Built-in by the customer) | No (Built-in by the customer) | No (Built-in by the customer) | No (Built-in by the customer) |
| With or w/o Lubrication Units | N/A / Available | N/A / Available | N/A / Available | N/A / Available | N/A / Available | N/A / Available | N/A | N/A | N/A | N/A | N/A / Available | - | N/A | N/A | N/A | - |
| With or without retainer | - | - | - | - | - | - | N/A | N/A | Available | N/A | - | N/A | N/A | Available | Available | N/A |
| The shaft diameter of a ball screw(φ) | 10 | 6 | 5 | 8 | 10 | 15 | 6 | 15 | 8 | 8 | 15 | - | 10 | 6 | 13 | - |
| Table length L1(mm) | 54 | 33.2 | 23 | 47.4 | 54 | 81 | 33.2 ～ 46 | 81 ～ 108 | 47.4 ～ 64.2 | 47.4 ～ 64 | 81 | 55 | 54 ～ 74.4 | 33.2 ～ 46 | 54 ～ 76 | 55 |
| Table width W1(mm) | 44.5 ～ 80 | 29.6 ～ 52 | 22 ～ 44 | 37.6 ～ 62 | 44.5 ～ 80 | 59.5 ～ 104 | 23 ～ 52 | 53 ～ 104 | 31 ～ 62 | 31 ～ 62 | 59.5 ～ 104 | 49 | 38 ～ 80 | 23 ～ 52 | 37.4 ～ 86 | 49 |
| Amplifier Voltage | - | - | - | - | - | - | N/A | N/A | N/A | N/A | - | N/A | N/A | N/A | N/A | N/A |
Loading...
Filter by:
-
Main Body/Peripheral Components
- Main Body
- Peripheral Part
-
Nominal (Height)
-
Accuracy
-
Table
-
Lead(mm)
-
Motor Mounting Posture
-
Cover
-
Grease
-
The presence or absence of motor
-
With or w/o Lubrication Units
-
With or without retainer
-
The shaft diameter of a ball screw(φ)
-
Table length L1(mm)
-
Table width W1(mm)
-
Amplifier Voltage
Brand
CAD data type
-
- 2D
- 3D
Examples how you can use these components
Categories related to Single Axis Actuators
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.