- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 3:00 to 15:00 (CEST) 16/6/2024. We apologize for the inconvenience.
Indexing Plungers（Page 2）
Filter products by: Type
?* Information on days to ship and prices
-
Indexing Plungers / Knobless Type
MISUMI
[Features] You can use it by attaching a knob according to the environment of use.- Volume Discount
- Order quantities extended (D-JIT)
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 15.23 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Indexing plungers for precision locating
GANTER
Indexing plungers GN 817.3 realize a reasonable priced precision locating when guide bushes DIN 179 are used.
For this purpose a guide bush DIN 179 is used as guide, whereby the dimension l3 of the plunger determines the length of the bush.
The precise location is, therefore, not dependent on the guide pin in the plunger, but on the accuracy of the guide bush (bore tolerance F7) and the plunger (tolerance h7). Both components are hardened and ground. It goes without saying that the bush length also influences the accuracy of the positioning.
Type C is used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 24.28 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Indexing plungers, Stainless Steel / Plastic knob
GANTER
Type G or GK of the GN 617 indexing plungers have been designed for applications where the indexing plunger is not operated with the standard knob.
The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 12.34 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Knob for Press Fit Indexing Plunger
MISUMI
[Features] This knob can be used for indexing Plunger Pressfit type.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 4.54 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Index Plunger (LBLT)
IMAO CORPORATION
Simple type index plunger ideal for temporary work fixing, etc.- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 18.91 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Cam action indexing plungers, Steel, with locking function
GANTER
The groove on GN 721.1 cam action indexing plungers ensures that the locking pin remains in its withdrawn position.
For opposing cam action indexing plungers the left or right-handed types allow practical use, that is the same setting of the lock.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 17.40 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Indexing plungers with T-Handle
GANTER
Indexing plungers GN 817.4 are similar to GN 817, but with a T-handle instead of a round head.
This shape allows better visual orientation of the indexing position of Type C and is advantageous when greater unlocking forces occur.
Type C with rest position is used in such applications where the plunger must not protrude continually. In that case the knob is retracted and afterwards turned by 90°. A notch keeps the plunger in this position.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 9.14 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Indexing plungers, removable
GANTER
Indexing plungers GN 817.9 have been designed such that special versions of the indexing pins can also be made economically in smaller unit quantities.
If reqired, the indexing pins can be machined or made by the user as shown in the drawing above. They are assembled with a countersunk screw and can therefore be assembled several times. All parts are supplied in a non-assembled set.
The indexing plungers type C are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 14.36 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Stainless Steel-Indexing plungers
GANTER
The indexing plungers GN 617 are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 19.64 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Indexing plungers Form C (K0747)
KIPP
· Indexing plungers facilitate indexing and locking
· Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
· High stability
· Material: steel or stainless steel
· Inexpensive version- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 3.80 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Indexing Plunger - PBY
NABEYA BI-TECH
[Features]
· An indexing plunger with an integrated mounting flange.
· Suitable for mounting equipment and devices on walls etc.
·Pull out the knob and rotate 90° to lock with the pin in a retracted state.
·To unlock, pull the knob out slightly and rotate it 90°.
· Returns to its original position via the action of the integrated spring.
· For mounting, please use commercially available hex socket bolts, etc.
· Using slotted holes allows you to adjust the position after mounting.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 20.71 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Indexing plungers, Steel / plastic knob
GANTER
Type G or GK of the GN 613 indexing plungers have been designed for applications where the indexing plunger is not operated with the standard knob.
The indexing plungers are designed such that the plunger set in the end position (spring is "on block") can also absorb axial forces. For applications in which these forces are substantially above the tensile force applied by the operator (Type G), GN 817 indexing plungers are to be preferred.
A special screw driver GN 613.1 is available. Two slots are provided in the upper end of the body which are accessible with the knob in its retracted position.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 7.06 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Locking plungers, PUSH-PUSH locking mechanism
GANTER
The indexing pin in the locking plungers GN 514 is moved via a so-called cardioid mechanism.
This mechanism means that the indexing pin is both extended and retracted alone by pressing the operating button (PUSH-PUSH locking mechanism).
Please note that the indexing pin cannot absorb any axial forces and that it retracts virtually by spring action; the indexing pin must therefore remain free and easy to move.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 14.84 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Indexing plungers Form D (K0747)
KIPP
· Indexing plungers facilitate indexing and locking
· Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
· High stability
· Material: steel or stainless steel
· Inexpensive version- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 3.88 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Indexing plungers, short version, Form C (K0748)
KIPP
· Indexing plungers facilitate indexing and locking
· Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
· High stability
· Ideal where space is restricted:
· Material: steel or stainless steel- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 4.26 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Indexing Plunger PLY
NABEYA BI-TECH
Two types of standardized stroke for each pin diameter. Pull the knob and rotate 90° to lock with the pin retracted. To unlock, pull the knob slightly and rotate 90°. Returns to its original position via internal spring action.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 13.93 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Index Plunger PMX
NABEYA BI-TECH
Simple structure index plunger.
[Features]
· Superior cost performance.
· For all pin diameters, coarse thread and fine thread are standardized.
· Can select main body material quality and whether or not to include a lock nut using the product code.
[Applications]
· For positioning workpieces.
· For attaching and detaching workpieces.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 12.29 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Indexing Plungers
NABEYA
Rotating the operation knob 90° enables fixation with the pin retracted.
[Features]
· Pulling and rotating the operation knob 90° enables locking with the pin retracted.
· To unlock, pull the operation knob a little and rotate it by 90°.
· Returns to its original position via internal spring action- Volume Discount
- 2D CAD data available
› Configure nowStarting from∗ ： 44.16 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Index Bolt With Mounting Flange, Horizontal
HALDER
[Features]
· Use washers (For example, ISO7092) for mounting.
· On types with locks, rotate the knob 90 degrees to stop the notch moving.
On types with holding mechanisms, pull the knob and rotate it approximately 70 degrees to keep the pin in its withdrawn state.
· Operating temperature range: -30 to +80°C.
· Up to 100°C on types with rings.- 3D CAD data available
› Configure nowStarting from∗ ： 4.91 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Indexing plungers, Steel, with lifting ring / with wire loop, without rest posit
GANTER
GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 4.04 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Mini indexing plungers, Stainless Steel / Plastic knob
GANTER
Mini indexing plungers GN 822.7 are distinguished for their small dimensions.
Based on the principle of the mini indexing plungers GN 822, this model combines their clever type of construction with a complete series of all current sizes of bolts and threads. They provide a reasonably priced alternative to the GN 607 / GN 607.1 indexing plungers of the appropriate sizes. To mount, first turn the mini indexing plunger in with the knurled button. Pulling the indexing pin will release the hexagon nut which can then be tightened with an open-end spanner.
They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
In type C, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 6.06 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
PMT.101 - Indexing plungers -Rest position SUPER-technopolymer body
ELESA
Indexing plungers with rest in retracted position with threaded body in glass fibre reinforced polyamide-based SUPER-technopolymer, plunger in hardened and burnished steel or AISI 303 stainless steel, knob in high-resilience polyamide-based technopolymer in black or red RAL 3000, spring in stainless steel AISI 302 and locking nut in glass fibre reinforced polyamide-based SUPER-technopolymer.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 5.37 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Indexing plunger with cam lever steel or stainless steel, Form B (K1584)
KIPP
· Simple and quick operation
· Suitable for high temperature applications
· With integrated detent function- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 10.53 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Indexing plungers Form B (K0747)
KIPP
· Indexing plungers facilitate indexing and locking
· Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
· High stability
· Material: steel or stainless steel
· Inexpensive version- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 3.76 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Indexing plungers without collar with extended pin Form H (K0633)
KIPP
· Indexing plungers facilitate indexing and locking
· Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
· High stability
· Material: steel or stainless steel- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 6.19 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Indexing Plungers / Plate Mount
MISUMI
[Features] It can be used in places where there is no space for a knob.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 87.53 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Indexing Plunger PXVS
NABEYA BI-TECH
[Features]
- Stainless steel.
- Superior corrosion resistance.
- Turn the lever to control the pin insertion.
- Retractable into the body with a 180° turn of the lever.
- Lever can be locked with a notch machined in the main body.
- Ergonomic lever cap attached to the PXVS-B/BK.
- Nickel plating for good abrasion resistance.- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 60.55 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Index Plunger (With No Knob) (NDX-N)
IMAO CORPORATION
The operating unit can be remotely operated by connecting with screws. Available in steel and stainless steel.
[Features]
- A hand operated spring plunger where you pull the knob and the nose retracts to easily release the positioning, while if the knob is released, it reverts to the original state by the force of the internal spring.
- If performing remote operation, it can be joined with the operation screw part.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 21.04 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Index Bolt With Hexagon Collar 22120
HALDER
[Features]
· For index holes.
· Operating temperature range is from -30 to +80°C.
· Use the distance collar (EH22120) to adjust the depth of the screw-in.- 3D CAD data available
› Configure nowStarting from∗ ： 7.70 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Index Bolt With Hexagon Collar 22120, With T-Handle
HALDER
[Features]
· For index holes.
· Dimensions do not change, regardless of whether or not locking mechanisms are present.
· Screw parts are designed to have clearance at the root, so even the hexagonal section can be tightened properly.
· Operating temperature range: -30 to +80°C.
· Use the distance collar (EH22120) to adjust the depth of the screw-in.- 3D CAD data available
› Configure nowStarting from∗ ： 8.87 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Cam action indexing plungers, Plunger pin protruded
GANTER
Cam action indexing plungers GN 712 are used in such applications where the plunger pin must not protrude continually. When turning the cam by 90° resp.120° degrees in anti-clockwise direction, the plunger pin is moved through a curved opening in the body. After that, the plunger pin is retracted.
Depending on the type, the plunger pin is moved back by a spring in its original position (Type A), is held in retracted position (Type R), resp. is secured against accidental operation (Type S).
In order to move the plunger pin, safety version Type S requires an additional lifting of the latch.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 23.74 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cam action indexing plungers, Zinc die casting
GANTER
Cam action indexing plungers GN 612.8 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. The notch allows safe positioning.
These cam action indexing plungers made of die-cast zinc are very reasonably priced design versions.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 7.30 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Indexing plungers, Plunger Stainless Steel
GANTER
Stainless Steel-Indexing plungers GN 608.5 are distinguished for their small dimensions.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 11.06 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Indexing plungers, Steel
GANTER
GN 7017 indexing plungers are activated through a lever and are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
The type C / CK with rest position are used for such applications where the plunger has to stay in its retracted position.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 6.34 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Indexing plungers, Steel, with red knob
GANTER
Indexing plungers GN 817 with rest position (Type C / CK) are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 7.34 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Stainless Steel-Indexing plungers, with lifting ring / with wire loop, without rest position
GANTER
GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 4.24 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Indexing plungers with rotation lock and lead-in chamfer, Form A (K1300)
KIPP
· Indexing plungers facilitate indexing and locking
· Application sectors: machine, instrument and fixture construction, measuring technology, domestic use- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 10.87 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Precision indexing plungers with tapered indexing pin, Form A, standard (K0359)
KIPP
· Indexing plungers facilitate indexing and locking
· Quick positioning and fixating
· High stability
· High repeat accuracy- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 86.77 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
Index Plungers, with hexagon collar, stainless steel A4
HALDER
MaterialBody
- • Stainless steel 1.4401
Locking pin
- • Stainless steel 1.4401 nickel-plated
Knob
- • Thermoplastic PA 6, black-grey, matt
- • Stainless steel 1.4401
Lock nut
- • Stainless steel 1.4401
Notes
Knob not removable.
Lock nuts have to be purchased separately.
› Configure nowStarting from∗ ： 17.53 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
-
Index Plunger (NDXN)
IMAO CORPORATION
It is a classic index plunger with excellent cost performance. Various types are available such as a nose hardening type, no baking type, etc.
[Features]
- It is a manual spring plunger. If you pull the knob the nose retracts and the position is determined and release it easy, when you release your hand it returns to the original state by the built-in spring.- Volume Discount
- 2D / 3D CAD data available
› Configure nowStarting from∗ ： 13.96 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Indexing Plungers Simple Ring Type IPR
KONISHI MFG
Pulling the ring retracts the center pin; releasing it returns the center pin to its original position by using the force of the spring. Can be used to calculate and select the position of jigs.- Volume Discount
- 2D CAD data available
› Configure nowStarting from∗ ： 16.81 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Indexing Plungers Simple Type IP
KONISHI MFG
Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions.- Volume Discount
- 2D CAD data available
› Configure nowStarting from∗ ： 16.82 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Plungers
TOSHIN CASTER
Simple, sturdy structure for easy, safe locking/unlocking. Optimal for equipment that performs positioning or height adjustment.
[Features]
- Lever-type indexing plunger with simple structure, high strength, and safe design.
- When locked, the design prevents it from coming off due to accidental shock or contact.
- When unlocked, the lever can be pulled up, retracted, and retained on the opposite side.
- Whether locked or unlocked, the lever will not get in the way.- Volume Discount
› Configure nowStarting from∗ ： 30.47 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Index Plungers, Mini Indexes, Basic Type
HALDER
[Features]
· Small index bolts are particularly well suited for mounting to thin objects.
· On items with hold mechanisms, pull out the knob and rotate it 30° to hold.
· Operating temperature range: -30 to 80°C.
· Mounting method: screw in the screw area on the main body, then lift up the knob and use the hexagonal section to tighten it.
· Increased screw size.- 3D CAD data available
› Configure nowStarting from∗ ： 4.70 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Index Bolts With Flange
HALDER
[Features]
· For index holes.
· With flanges for mounting in a horizontal position.
· Mounting holes feature double grease seals and thus can be mounted in both directions.
· The operating temperature range of the plastic cap is from -30 to +80°C.- 3D CAD data available
› Configure nowStarting from∗ ： 32.24 € Min. Shipping Days ： Same day *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Type |
| Locking Mechanism |
| Mounting Method |
| Overall Length |
| Body Material |
| All Stainless |
| Tip Material |
| Body O.D./Thread M(mm) |
| Stroke S(mm) |
| Tip Surface Treatment |
| Tip Heat Treatment |
| Tip O.D. d(Ø) |
| Length L(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | GANTER | GANTER | MISUMI | IMAO CORPORATION | GANTER | GANTER | GANTER | GANTER | KIPP | NABEYA BI-TECH | GANTER | GANTER | KIPP | KIPP | NABEYA BI-TECH | NABEYA BI-TECH | NABEYA | HALDER | GANTER | GANTER | ELESA | KIPP | KIPP | KIPP | MISUMI | NABEYA BI-TECH | IMAO CORPORATION | HALDER | HALDER | GANTER | GANTER | GANTER | GANTER | GANTER | GANTER | KIPP | KIPP | HALDER | IMAO CORPORATION | KONISHI MFG | KONISHI MFG | TOSHIN CASTER | HALDER | HALDER |
| Product Series | Indexing plungers, Steel, with lifting ring / with wire loop, without rest posit | PMT.101 - Indexing plungers -Rest position SUPER-technopolymer body | Indexing plunger with cam lever steel or stainless steel, Form B (K1584) | Indexing plungers without collar with extended pin Form H (K0633) | Stainless Steel-Indexing plungers, with lifting ring / with wire loop, without rest position | Indexing plungers with rotation lock and lead-in chamfer, Form A (K1300) | Precision indexing plungers with tapered indexing pin, Form A, standard (K0359) | ||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Starting from∗ | 15.23 € *Unit price with basic configuration Volume Discount | 24.28 € *Unit price with basic configuration Volume Discount | 12.34 € *Unit price with basic configuration Volume Discount | 4.54 € *Unit price with basic configuration Volume Discount | 18.91 € *Unit price with basic configuration | 17.40 € *Unit price with basic configuration Volume Discount | 9.14 € *Unit price with basic configuration Volume Discount | 14.36 € *Unit price with basic configuration Volume Discount | 19.64 € *Unit price with basic configuration Volume Discount | 3.80 € *Unit price with basic configuration | 20.71 € *Unit price with basic configuration Volume Discount | 7.06 € *Unit price with basic configuration Volume Discount | 14.84 € *Unit price with basic configuration Volume Discount | 3.88 € *Unit price with basic configuration | 4.26 € *Unit price with basic configuration | 13.93 € *Unit price with basic configuration Volume Discount | 12.29 € *Unit price with basic configuration Volume Discount | 44.16 € *Unit price with basic configuration Volume Discount | 4.91 € *Unit price with basic configuration | 4.04 € *Unit price with basic configuration Volume Discount | 6.06 € *Unit price with basic configuration Volume Discount | 5.37 € *Unit price with basic configuration Volume Discount | 10.53 € *Unit price with basic configuration | 3.76 € *Unit price with basic configuration | 6.19 € *Unit price with basic configuration | 87.53 € *Unit price with basic configuration Volume Discount | 60.55 € *Unit price with basic configuration | 21.04 € *Unit price with basic configuration Volume Discount | 7.70 € *Unit price with basic configuration | 8.87 € *Unit price with basic configuration | 23.74 € *Unit price with basic configuration Volume Discount | 7.30 € *Unit price with basic configuration Volume Discount | 11.06 € *Unit price with basic configuration Volume Discount | 6.34 € *Unit price with basic configuration Volume Discount | 7.34 € *Unit price with basic configuration Volume Discount | 4.24 € *Unit price with basic configuration Volume Discount | 10.87 € *Unit price with basic configuration | 86.77 € *Unit price with basic configuration | 17.53 € *Unit price with basic configuration | 13.96 € *Unit price with basic configuration Volume Discount | 16.81 € *Unit price with basic configuration Volume Discount | 16.82 € *Unit price with basic configuration Volume Discount | 30.47 € *Unit price with basic configuration Volume Discount | 4.70 € *Unit price with basic configuration | 32.24 € *Unit price with basic configuration |
| Min. Shipping Days | Same day | Same day | Same day | Same day | 6 Days | 5 Days | Same day | 4 Days | Same day | 4 Days | Same day | 4 Days | Same day | 4 Days | 4 Days | Same day | Same day | 6 Days | Same day | Same day | Same day | Same day | 4 Days | 4 Days | 4 Days | Same day | Same day | 6 Days | Same day | Same day | 5 Days | Same day | Same day | Same day | Same day | Same day | 4 Days | 4 Days | 3 Days | 6 Days | Same day | Same day | Same day | Same day | Same day |
| Specifications |
| ||||||||||||||||||||||||||||||||||||||||||||
| Type | W/o Knob | - | - | W/o Knob | Lever Type | - | - | - | - | - | Standard Knob | - | - | - | - | Standard Knob | Standard Knob | Standard Knob | Standard Knob / With Ring | - | - | - | - | - | - | Standard Knob | Lever Type | W/o Knob | Standard Knob / W/o Knob | Special Knobs | - | - | - | - | - | - | - | - | Standard Knob | Standard Knob | Special Knobs | Standard Knob | Lever Type | Standard Knob | Special Knobs |
| Locking Mechanism | Without Locking Nose | - | - | - | With Locking Nose | - | - | - | - | - | With Locking Nose | - | - | - | - | With Locking Nose | Not Provided | With Locking Nose | - | - | - | - | - | - | - | With Locking Nose | With Locking Nose | Not Provided | - | - | - | - | - | - | - | - | - | - | - | Not Provided | Not Provided | Not Provided | Without Locking Nose | - | - |
| Mounting Method | Screw-In | - | - | Press Fit | Screw-In | - | - | - | - | - | Flange | - | - | - | - | Screw-In | Screw-In | Screw-In | Others | - | - | - | - | - | - | Flange | Screw-In | Screw-In | Screw-In | Screw-In | - | - | - | - | - | - | - | - | - | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In | Screw-In |
| Overall Length | Standard | - | - | Standard | Standard | - | - | - | - | - | Short | - | - | - | - | Standard | Standard | Standard | - | - | - | - | - | - | - | Short | Standard | Standard | - | - | - | - | - | - | - | - | - | - | - | Standard | Standard | Standard | Standard | Standard | - |
| Body Material | Steel / Stainless Steel | - | Stainless Steel | Others | Steel | - | - | - | Stainless Steel | Steel / Stainless Steel | Zinc Die Cast | - | - | Steel / Stainless Steel | Steel / Stainless Steel | - | - | Steel / Stainless Steel | Zinc Die Cast | Steel | - | Stainless Steel / Polyamide | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | - | Steel / Stainless Steel | - | - | - | - | - | Steel | - | Stainless Steel | Steel / Stainless Steel | Steel | - | Steel / Stainless Steel | Steel | Steel | Steel | - | - |
| All Stainless | - | - | - | - | Not Compliant | - | - | - | - | - | Not Compliant | - | - | - | - | Not Compliant | Not Compliant | Not Compliant | - | - | - | - | - | - | - | - | Applicable / Not Compliant | Not Compliant | - | - | - | - | - | - | - | - | - | - | - | Not Compliant | Not Compliant | Not Compliant | Not Compliant | - | - |
| Tip Material | Steel / Stainless Steel | - | - | - | Steel | - | - | - | - | - | - | - | - | - | - | - | - | Steel / Stainless Steel | - | - | - | - | - | - | - | Steel | - | Steel / Stainless Steel | - | - | - | - | - | - | - | - | - | - | - | Steel / Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | - | - |
| Body O.D./Thread M(mm) | 10 ～ 16 | - | - | 3 ～ 8 | 6 ～ 16 | - | - | - | - | - | 6 ～ 12 | - | - | - | - | 8 ～ 20 | 6 ～ 12 | 10 ～ 16 | - | - | - | M10 ～ M20 | - | - | - | - | 12 ～ 20 | 8 ～ 20 | - | - | - | - | - | - | - | - | - | - | - | 6 ～ 20 | 6 ～ 12 | 6 ～ 12 | 10 | - | - |
| Stroke S(mm) | 5 ～ 8 | - | - | - | 9.5 ～ 25 | - | - | - | - | 3.5 ～ 8 | 4 ～ 8 | - | - | 3.5 ～ 8 | 3.5 ～ 8 | 4 ～ 15 | 4 ～ 8 | 5 ～ 8 | - | - | - | 5 ～ 10 | 5 ～ 10 | 3.5 ～ 8 | 5 ～ 24 | 6 | 8 ～ 12 | 4 ～ 10 | - | - | - | - | - | - | - | - | 4 ～ 6 | 6 | - | 3.5 ～ 10 | 4 ～ 8 | 4 ～ 8 | - | - | - |
| Tip Surface Treatment | Black Oxide / Nickel Plating | - | - | - | Others | - | - | - | - | - | Not Provided | - | - | - | - | Not Provided / Nickel Plating | Not Provided | Black Oxide / Electroless Nickel Plating | - | - | - | - | - | - | - | Black Oxide | Nickel Plating | Not Provided | - | - | - | - | - | - | - | - | - | - | - | Not Provided | Not Provided | Not Provided | Not Provided | - | - |
| Tip Heat Treatment | Not Provided / Hardened | - | - | - | Not Provided | - | - | - | - | - | Not Provided | - | - | - | - | Not Provided / Hardened | Not Provided | Not Provided / Carburized | - | - | - | - | - | - | - | Hardened | Not Provided | Not Provided / Hardened / Carburized | - | - | - | - | - | - | - | - | - | - | - | Not Provided / Hardened / Carburized | Not Provided | Not Provided | Not Provided | - | - |
| Tip O.D. d(Ø) | 5 ～ 8 | 6 ～ 10 | 5 ～ 10 | - | 4 ～ 10 | 5 ～ 10 | 6 ～ 12 | 7 ～ 10 | 5 ～ 10 | - | 4 ～ 8 | 5 ～ 10 | 6 ～ 8 | - | - | 4 ～ 12 | 4 ～ 8 | 5 ～ 8 | 4 ～ 8 | 3 ～ 10 | 4 ～ 10 | 5 ～ 10 | - | - | - | 6 | 5 ～ 12 | 4 ～ 10 | 5 ～ 10 | 6 ～ 12 | 6 ～ 10 | 4 ～ 12 | 6 ～ 8 | 4 ～ 10 | 4 ～ 16 | 3 ～ 10 | - | - | - | 3 ～ 10 | 4 ～ 8 | 4 ～ 8 | 5 | 4 ～ 10 | 6 ～ 12 |
| Length L(mm) | 33 ～ 54 | - | - | - | 41.5 ～ 102.5 | - | - | - | - | - | 33 ～ 63.5 | - | - | - | - | 39 ～ 82 | 30.5 ～ 71 | 49 ～ 73 | - | - | - | - | - | - | - | 48 | 47 ～ 71 | 32 ～ 62 | - | - | - | - | - | - | - | - | - | - | - | 31.5 ～ 74 | 34.5 ～ 71 | 30.5 ～ 59 | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Locking Mechanism
-
Not Provided
-
With Locking Nose
-
Without Locking Nose
-
Not Provided
-
Mounting Method
- Screw-In
- Press Fit
- Bolt Mounting
- Others
- Flange
-
Overall Length
-
Body Material
-
All Stainless
-
Tip Material
-
Body O.D./Thread M(mm)
-
Stroke S(mm)
-
Tip Surface Treatment
-
Tip Heat Treatment
-
Tip O.D. d(Ø)
-
Length L(mm)
Brand
CAD data type
-
- 2D
- 3D
Standard shipping days
-
- All
- Same day
- 2 Days or Less
- 3 Days or Less
- 4 Days or Less
- 5 Days or Less
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
Categories related to Indexing Plungers
Payment Method
On-Demand Manufacturing
Certificates
Copyright © MISUMI Corporation All Rights Reserved.