Indexing Plungers（Page 4）

?* Information on days to ship and prices

• 

  Stainless Steel-Indexing plungers, removable

  GANTER

  Indexing plungers GN 817.8 have been designed such that special versions of the indexing pins can also be made economically in smaller unit quantities.
  If reqired, the indexing pins can be machined or made by the user as shown in the drawing above. They are assembled with a countersunk screw and can therefore be assembled several times. All parts are supplied in a non-assembled set.
  The indexing plungers type C / CK are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	17.74 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel-Indexing plungers, with lifting ring / with wire loop, without rest position

  GANTER

  GN 717 indexing plungers are characterized by small dimensions. These indexing plungers are universally applicable due to their prevention of misalignments and positioning errors of the mating indexing bores.
  During assembly, the max. tightening torques shown in the table should not be exceeded when securing the lock nut.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	4.24 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  PMT.101 - Indexing plungers -Rest position SUPER-technopolymer body

  ELESA

  Indexing plungers with rest in retracted position with threaded body in glass fibre reinforced polyamide-based SUPER-technopolymer, plunger in hardened and burnished steel or AISI 303 stainless steel, knob in high-resilience polyamide-based technopolymer in black or red RAL 3000, spring in stainless steel AISI 302 and locking nut in glass fibre reinforced polyamide-based SUPER-technopolymer.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	5.37 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Positioning Bushings, for index bolts and index plungers

  HALDER

  Positioning bushings are suitable for index plungers and index bolts.
  Low wear thanks to hardened running ball.

  Select to compare

  › Configure now
  Starting from∗ ：	6.34 €
  Min. Shipping Days ：	2 Days

  *Unit price with basic configuration

• 

  Indexing plungers, Steel

  GANTER

  • Volume Discount

  Select to compare

  › Configure now
  Starting from∗ ：	16.48 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Indexing plunger stainless steel with remote actuation (K1502)

  KIPP

  · Actuation possible in inaccessible assembly spaces
  
  · Ergonomically optimised actuating position possible
  
  · Actuation possible even when safety distances are required
  
  · Easy replacement of wear parts
  
  · Flexible connection of an actuating element

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	39.02 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers (K0340)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	5.60 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers Form B (K0747)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Material: steel or stainless steel
  
  · Inexpensive version

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.76 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers Form C (K0338)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Easy handling
  
  · Material: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	8.71 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers Form C (K0747)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Material: steel or stainless steel
  
  · Inexpensive version

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.80 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers with extended locking pin Form D (K0630)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Material: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	9.81 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Indexing plungers with locked mark, Form A (K1149)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Lock markings as a visual aid for the desired engaged position

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	11.74 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Locking bolts without collar form J (K0345)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Application sectors: machine, instrument and fixture construction, measuring technology, domestic use
  
  · High stability
  
  · Threaded pins enable the indexing plunger to be operated
  
  · Material: steel or stainless steel

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	5.81 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Precision indexing plungers with tapered indexing pin, Form B, lockable (K0359)

  KIPP

  · Indexing plungers facilitate indexing and locking
  
  · Quick positioning and fixating
  
  · High stability
  
  · High repeat accuracy

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	92.63 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Index Plungers, with hexagon collar, stainless steel A4

  HALDER

  Material

  Body

  • Stainless steel 1.4401
  

  Locking pin

  • Stainless steel 1.4401 nickel-plated
  

  Knob

  • Thermoplastic PA 6, black-grey, matt
  

  • Stainless steel 1.4401
  

  Lock nut

  • Stainless steel 1.4401
  

  Notes

  Knob not removable.

  Lock nuts have to be purchased separately.

  Select to compare

  › Configure now
  Starting from∗ ：	17.53 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Index Plungers, with sensor

  HALDER

  Material

  Body

  • Stainless steel 1.4305
  

  Locking pin

  • Stainless steel 1.4305, nickel-plated
  

  Knob

  • Thermoplastic PA 6, black, dull
  

  Cable

  • Thermoplastic PUR, black
  

  Magnet

  • Permanent magnet
  

  Sensor

  • Thermoplastic PA 6, black, dull
  

  Lock nut

  • Stainless steel A2 (ISO 8675)
  

  Assembly

  The enclosed separate sensor and sensor clip can be mounted with the enclosed Allen key. The derivation direction of the sensor cable can be determined individually.

  • Push the sensor into the side of the sensor clip.
  • Tighten the internal hexagon screw of the sensor with light hand force (max. 0.1 Nm).
  • Clip the sensor clip into the annular groove of the index plunger in any position.
  • By turning the sensor clip, the sensor cable's derivation direction can be adjusted.
  

  Note:

  To avoid interferences, no magnetic fields should act on the index plunger.

  Operation

  When using locking index plungers, the knob is pulled-out, turned 90° and secured by a notched catch (when locking pin should not overhang).

  Notes

  Knob not removable.

  Lock nuts have to be purchased separately.

  Select to compare

  › Configure now
  Starting from∗ ：	95.02 €
  Min. Shipping Days ：	3 Days

  *Unit price with basic configuration

• 

  Indexing Plunger PHY

  NABEYA BI-TECH

  Compact indexing plunger.
  
  [Features]
  - A compact indexing plunger.
  - Pull the knob and rotate 30° to lock with the pin retracted.
  - To unlock, pull the knob slightly and rotate 30°.
  - Returns to its original position via internal spring action.
  - Lock mechanism built into the knob.
  - Overall length is the same as a PHX without a lock mechanism.
  - Pin is nickel-plated for good abrasion resistance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	15.69 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing Plungers, PCV

  NABEYA BI-TECH

  Index plungers with pins incorporated into the main body. The pins move in and out by turning the lever.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	66.47 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing Plunger PCX

  NABEYA BI-TECH

  [Features]
  - A new type of indexing plunger.
  - Pin usually retracted in the main unit.
  - With lock mechanism.
  - The knob-type PCX-A/AK and the key-type PCX-B/BK are standardized.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	55.37 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Indexing Plunger - PFX

  NABEYA BI-TECH

  [Features]
  · A flanged type indexing plunger that is mounted using countersunk bolts and rivets etc.
  · The long pin type PFX-H-A (long pin type) is ideal for mounting thick panels and frames etc.
  · The pin has undergone hardening and offers excellent abrasion resistance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	24.77 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing Plunger - PFY

  NABEYA BI-TECH

  [Features]
  · A flanged type indexing plunger that is mounted using countersunk bolts and rivets etc.
  · The long pin type PFY-H-A is ideal for mounting thick panels and frames etc.
  · Pull out the knob and rotate 90° to lock with the pin in a retracted state. · To unlock, pull the knob out slightly and rotate it 90°. · Returns to its original position via the action of the integrated spring.
  · The lock mechanism is integrated into the knob. Therefore, the overall length is the same as that of the PFX, which does not have a lock mechanism.
  · The pin has undergone hardening and offers excellent abrasion resistance.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	25.98 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Indexing Plunger PPLX

  NABEYA BI-TECH

  [Features]
  - Indexing plunger for accurate positioning.
  - H7 pin diameter tolerance.
  - G6 hole tolerance recommended for the mating side.
  - Use with the positioning bushings for precise positioning.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	79.40 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  Index Plunger (Short Model Nose Model Lock) (NDXNS-L)

  IMAO CORPORATION

  This has the nose-locking style that keeps the pin in a retracted state. The threaded part is short so it is ideal for mounting to plates and such.
  
  [Features]
  - It is a hand operated index plunger. Pull the knob and the nose retracts and the position release is easily done, let go of the knob and the nose returns to the original state by the force of the internal spring.
  - The nose locking type can be locked (fixed) by rotating the knob 90° while it is pulled and the nose is retracted.
  - Recess processing has been performed on the threaded part

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	22.42 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Indexing Plungers (NDXN-ASUS)

  IMAO CORPORATION

  Made entirely of stainless steel, this product is ideal for areas demanding rust-proofing as well as clean environments. Two types of noses are available: hardened and non-hardened.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	36.49 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Index Plunger (Short Model) (NDXNS)

  IMAO CORPORATION

  The threaded part is short so it is ideal for mounting to plates, etc.
  
  [Features]
  - With the index plunger hand operation, when the knob is pulled the nose retracts but can easily be released. Let go and the nose returns to the original state by means of the internal spring.
  - Recess processing has been performed on the threaded part

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	16.68 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Engineering Plastics Index Plunger (Nose Lock Model) (EIP-L)

  IMAO CORPORATION

  This has the nose-locking style that keeps the pin in a retracted state. Because everything other than the nose is made of resin, it is ideal not only for for industrial machinery, but also for uses such as health care instruments, assistive devices, and in the furniture field, etc.
  
  [Features]
  - The body is made of resin so it is lightweight.
  - It is optimal for places that do not tolerate rust.
  - With the spring plunger hand operation, pull the knob and the nose retracts but can easily be released. Let go and the nose returns to the original state with the internal spring.
  - The nose locking type can be locked (fixed) by rotating the knob 90° while it is pulled and the nose is retracted.

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	14.64 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Indexing Plungers Simple Ring Type IPR

  KONISHI MFG

  Pulling the ring retracts the center pin; releasing it returns the center pin to its original position by using the force of the spring. Can be used to calculate and select the position of jigs.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	16.81 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing Plungers IPW

  KONISHI MFG

  Pulling the knob retracts the center pin; releasing it returns it to its original position via spring force. Use to calculate and adjust jig positions when welding or fuse mounting.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	23.04 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing Plunger IP-3

  KONISHI MFG

  This is a buttonless indexing plunger (IP-3). A lock nut is included.

  • Volume Discount

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	17.63 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing Plungers Flange Type (with Lock Function) IPFL

  KONISHI MFG

  Pulling the knob and rotating it 90° locks the product with the center pin in a retracted state. Returning the knob to its original position releases the lock and the center pin returns to its original position. Flat head screw fixed type indexing plungers.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	38.67 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Indexing Lever Plungers (Stainless Steel) ILP-Sus

  KONISHI MFG

  Rotate the lever 180° to retract the center pin and engage the lock. Use to calculate and adjust the position of jigs.

  2D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	105.15 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Mounting Blocks For Index Plungers And Bolts, Die-Cast

  HALDER

  [Features]
  · Can be used for mounting index bolts and for expanding applications.
  · Can also be used for mounting locating bushing EH22120.
  · Operating temperature range: maximum 100°C.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	5.08 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Index Plungers For Thin-Walled Pieces

  HALDER

  [Features]
  · Index bolt for through holes in thin sheets.
  · A fixing sleeve can be used to mount sheets 1 to 5 mm thick
  · For types with locks, pulling the knob and rotating it 90 degrees locks the mechanism with the notch.
  · For this element, depending on the thickness of the opposing part, the pin may not fit fully into the notch, even if the knob is pulled all the way out.
  · Operating temperature range: from -30 to +80°C.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	3.94 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Index Bolts Without Thread, Weldable

  HALDER

  [Features]
  · For index holes.
  · Fixed by welding or bonding.
  · Operating temperature range is from ‐30 to +80°C.

  3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	7.20 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing plungers for welding, with rest position

  GANTER

  Indexing plungers GN 607.5 with rest position are used in cases where the indexing pin is temporarily not allowed to protrude. After pulling out, the knob is turned by 90°.
  
  A notch keeps the plunger in this position.
  
  The GN 607.5 indexing plungers are intended for welded fixing, in particular for use in steel square tubings.
  
  The lug d2 is intended for positioning.
  
  The plastic knob with the in-moulded indexing pin is driven on after the welding process.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	15.20 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Indexing plungers for welding, without rest position

  GANTER

  Indexing plungers GN 607.4 are designed for welded fixing, in particular for use in steel square tubings.
  The lug d2 is intended for positioning.
  The plastic knob with the in-moulded indexing pin is driven on after the welding process.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	14.44 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing plungers with rest position, Plunger Steel

  GANTER

  Indexing plungers GN 608.1 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
  Indexing plungers GN 608.1 are distinguished for their small dimensions. The locking tab is integrated into the knob thus giving reliable operation at all times.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	8.78 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing plungers, Plunger Steel

  GANTER

  Indexing plungers GN 608 are distinguished for their small dimensions.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	8.30 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing plungers, Steel / long Plastic-knob

  GANTER

  Indexing plungers GN 817.2 correspond to GN 817, they only differ by a longer knob.
  Type C / CK are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	9.16 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Indexing plungers, with rest position, Plunger Stainless Steel

  GANTER

  Indexing plungers GN 608.6 with rest position are used for such applications where the plunger has to stay in its retracted position. To achieve this, the knob is rotated by 90° degrees after being retracted. A notch keeps the plunger in this position.
  Indexing plungers GN 608.6 are distinguished for their small dimensions. The locking tab is integrated into the knob thus giving reliable operation at all times.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	11.46 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Locking plungers, Plunger retracted

  GANTER

  If not operated, the plunger of the locking plungers GN 816.1 is retracted. To move out, move against the spring force and hold in the end position by turning by 90°.
  The shape of the cam curve secures the plunger against accidental operation.
  When operating the button (Type AR / ARK), the visible red covering sleeve indicates the locking status: Indexing pin does not protrude.
  For the execution with operation with key (Type B / BK) a key is required to move the plunger. In this execution, a cover sleeve provides additional security and safety from unauthorized removal of the locking plunger. The cover sleeve also provides additional protection against malfunction caused by dirt.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	19.54 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Mini indexing plungers, covered indexing mechanism

  GANTER

  Mini indexing plungers GN 822.6 are distinguished for their small dimensions.
  Based on the principle of the GN 822 mini indexing plungers, this model combines their clever type of construction with a complete series of all current sizes of bolts and threads. They provide a reasonably priced alternative to the GN 607 / GN 607.1 indexing plungers of the appropriate sizes. To mount, first turn the mini indexing plunger in with the knurled button. Pulling the indexing pin will release the hexagon nut which can then be tightened with an open-end spanner.
  They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
  In type C, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	5.64 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Mini indexing plungers, Stainless Steel / Plastic knob

  GANTER

  Mini indexing plungers GN 822.7 are distinguished for their small dimensions.
  Based on the principle of the mini indexing plungers GN 822, this model combines their clever type of construction with a complete series of all current sizes of bolts and threads. They provide a reasonably priced alternative to the GN 607 / GN 607.1 indexing plungers of the appropriate sizes. To mount, first turn the mini indexing plunger in with the knurled button. Pulling the indexing pin will release the hexagon nut which can then be tightened with an open-end spanner.
  They are inserted into position by holding them by the serrated knob. The spanner flats on the lock nut are revealed when retracting the pin, so that the mini indexing plunger can be easily tightened by means of a fork spanner.
  In type C, the button can be turned by 30° after retracting the indexing pin, holding it in the “retraced” position using the indexing lock.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	6.06 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel-Cam action indexing plungers for welding

  GANTER

  Stainless Steel-Cam action indexing plungers GN 612.3 are used in cases where the locking pin must not protrude all the time. By rotating the lock through 180° the locking pin withdraws itself. A notch keeps the plunger in this position.
  The square body can therefore be welded in any required position. In order to prevent a change in the spring load by the transferred heat we recommend spot welding the plunger body.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	23.98 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Stainless Steel-Cam action indexing plungers, without locking function

  GANTER

  For GN 721.5 Stainless Steel-Cam action indexing plungers the indexing plunger pin is withdrawn by turning the lock by 180°.
  When the cam action indexing plungers are positioned symmetrically, the left or right handed types allow for a practical, i.e. equal, direction setting of the lock.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  › Configure now
  Starting from∗ ：	21.66 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...