Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Type | D Tolerance | Material | Surface Treatment | ||
Standard | Wrench Flats | ||||
SFMRT | SFMRTS | h9 (Cold-drawn) | EN 1.1191 Equiv. | Black Oxide | |
PSFMRT | PSFMRTS | Electroless Nickel Plating | |||
SSFMRT | SSFMRTS | EN 1.4301 Equiv. | - | ||
SFHRT | SFHRTS | h7 (Ground) | EN 1.1191 Equiv. | Black Oxide | |
PSFHRT | PSFHRTS | Electroless Nickel Plating | |||
SSFHRT | SSFHRTS | EN 1.4301 Equiv. | - | ||
SFRT | SFRTS | g6 (Ground) | EN 1.1191 Equiv. | Black Oxide | |
PSFRT | PSFRTS | Electroless Nickel Plating | |||
SSFRT | SSFRTS | EN 1.4301 Equiv. | - | ||
HFRT | - | EN 1.7220 Equiv. Hardness: 30 ~ 35HRC | Black Oxide | ||
PHFRT | - | Electroless Nickel Plating |
Part Number | - | L | - | M | - | SC | |
SFMRT30 SSFHRTS25 | - - - | 250 200 | - - | M12 M8 | - | SC20 |
Part Number | L=0.1mm Increment | M (Coarse) Selection | SC 1mm Increment Wrench Flats Type only | W | ℓ2 | |||||||||||||
Type | D | |||||||||||||||||
Standard | Wrench Flats | |||||||||||||||||
SFMRT PSFMRT SSFMRT (D4, D5 and D6 are not available for SSFMRT.) | SFMRTS PSFMRTS SSFMRTS (D4, D5 and D6 are not available for SSFMRTS.) (Wrench flats are not available for D4 and D5.) | 4 | 15.0~200.0 | 2 | - | - | - | |||||||||||
5 | 15.0~250.0 | 2.6 | 3 | |||||||||||||||
6 | 20.0~300.0 | 3 | 4 | SC+ℓ2≤L SC=0 or SC≥1 For SC≤Mx3 W-M≥2 | 5 | 8 | ||||||||||||
8 | 20.0~400.0 | 3 | 4 | 5 | 6 | 7 | ||||||||||||
10 | 20.0~500.0 | 4 | 5 | 6 | 8 | |||||||||||||
12 | 30.0~600.0 | 5 | 6 | 8 | 10 | 10 | ||||||||||||
15 | 30.0~700.0 | 5 | 6 | 8 | 10 | 13 | ||||||||||||
20 | 40.0~800.0 | 5 | 6 | 8 | 10 | 12 | 16 | 17 | ||||||||||
25 | 50.0~800.0 | 5 | 6 | 8 | 10 | 12 | 16 | 22 | ||||||||||
30 | 60.0~800.0 | 8 | 10 | 12 | 16 | 20 | 27 | 15 | ||||||||||
35 | 70.0~800.0 | 8 | 10 | 12 | 16 | 20 | 24 | 30 |
Part Number | L=0.1mm Increment | M (Coarse) Selection | SC 1mm Increment Wrench Flats Type only | W | ℓ2 | |||||||||||||
Type | D | |||||||||||||||||
Standard | Wrench Flats | |||||||||||||||||
SFHRT PSFHRT SSFHRT | SFHRTS PSFHRTS SSFHRTS (Wrench flats are not available for D4 and D5.) | 4 | 15.0~200.0 | 2 | - | - | - | |||||||||||
5 | 15.0~250.0 | 2.6 | 3 | |||||||||||||||
6 | 20.0~300.0 | 3 | 4 | SC+ℓ2≤L SC=0 or SC≥1 For SC≤Mx3 W-M≥2 | 5 | 8 | ||||||||||||
8 | 20.0~400.0 | 3 | 4 | 5 | 6 | 7 | ||||||||||||
10 | 20.0~500.0 | 4 | 5 | 6 | 8 | |||||||||||||
12 | 30.0~600.0 | 5 | 6 | 8 | 10 | 10 | ||||||||||||
15 | 30.0~700.0 | 5 | 6 | 8 | 10 | 13 | ||||||||||||
17 | 40.0~800.0 | 5 | 6 | 8 | 10 | 12 | 14 | |||||||||||
20 | 40.0~800.0 | 5 | 6 | 8 | 10 | 12 | 16 | 17 | ||||||||||
25 | 50.0~800.0 | 5 | 6 | 8 | 10 | 12 | 16 | 22 | ||||||||||
30 | 60.0~800.0 | 8 | 10 | 12 | 16 | 20 | 27 | 15 | ||||||||||
35 | 70.0~800.0 | 8 | 10 | 12 | 16 | 20 | 24 | 30 | ||||||||||
40 | 80.0~800.0 | 12 | 16 | 20 | 24 | 30 | 36 | 20 | ||||||||||
50 | 100.0~800.0 | 16 | 20 | 24 | 30 | 41 |
Part Number | L=0.1mm Increment | M (Coarse) Selection | SC 1mm Increment Wrench Flats Type only | W | ℓ2 | ||||||||||||||
Type | D | ||||||||||||||||||
Standard | Wrench Flats | ||||||||||||||||||
SFRT PSFRT SSFRT (D13, 16, 18 and 22 are not available for SSFRT.) *HFRT (Only * marked sizes are available.) *PHFRT (Only * marked sizes are available.) | SFRTS PSFRTS SSFRTS (D13, 16, 18 and 22 are not available for SSFRTS.) (Wrench flats are not available for D4 and D5.) | 4 | 15.0~200.0 | 2 | - | - | - | ||||||||||||
5 | 15.0~250.0 | 2.6 | 3 | ||||||||||||||||
6 | 20.0~300.0 | 3 | 4 | SC+ℓ2≤L SC=0 or SC≥1 For SC≤Mx3 W-M≥2 | 5 | 8 | |||||||||||||
8 | 20.0~400.0 | 3 | 4 | 5 | 6 | 7 | |||||||||||||
10 | 20.0~500.0 | 4 | 5 | 6 | 8 | ||||||||||||||
12 | 30.0~600.0 | 5 | 6 | 8 | 10 | 10 | |||||||||||||
13 | 30.0~600.0 | 5 | 6 | 8 | 11 | ||||||||||||||
* | 15 | 30.0~700.0 | 5 | 6 | 8 | 10 | 13 | ||||||||||||
16 | 30.0~800.0 | 5 | 6 | 8 | 10 | 14 | |||||||||||||
17 | 40.0~800.0 | 5 | 6 | 8 | 10 | 12 | |||||||||||||
18 | 40.0~800.0 | 5 | 6 | 8 | 10 | 12 | 15 | ||||||||||||
* | 20 | 40.0~800.0 | 5 | 6 | 8 | 10 | 12 | 16 | 17 | ||||||||||
22 | 40.0~800.0 | 5 | 6 | 8 | 10 | 12 | 16 | 19 | |||||||||||
* | 25 | 50.0~800.0 | 5 | 6 | 8 | 10 | 12 | 16 | 22 | ||||||||||
* | 30 | 60.0~800.0 | 8 | 10 | 12 | 16 | 20 | 27 | 15 | ||||||||||
* | 35 | 70.0~800.0 | 8 | 10 | 12 | 16 | 20 | 24 | 30 | ||||||||||
* | 40 | 80.0~800.0 | 12 | 16 | 20 | 24 | 30 | 36 | 20 | ||||||||||
* | 50 | 100.0~800.0 | 16 | 20 | 24 | 30 | 41 |
3D preview is not available, because the part number has not yet been determined.
Part Number
|
---|
HFRT15-[15-800/0.1]-M[4,5,6,8,10] |
HFRT15-[15-800/0.1]-MD[4,5,6,8,10] |
HFRT20-[30-800/0.1]-M[4,5,6,8,10,12,16] |
HFRT20-[30-800/0.1]-MD[4,5,6,8,10,12,16] |
HFRT25-[50-800/0.1]-M[4,5,6,8,10,12,16] |
HFRT25-[50-800/0.1]-MD[4,5,6,8,10,12,16] |
HFRT30-[60-800/0.1]-M[6,8,10,12,16,20] |
HFRT30-[60-800/0.1]-MD[6,8,10,12,16,20] |
HFRT35-[70-800/0.1]-M[6,8,10,12,16,20,24] |
HFRT35-[70-800/0.1]-MD[6,8,10,12,16,20] |
HFRT40-[80-800/0.1]-M[10,12,16,20,24,30] |
HFRT40-[80-800/0.1]-MD[10,12,16,20] |
HFRT50-[100-800/0.1]-M[12,16,20,24,30] |
HFRT50-[100-800/0.1]-MD[12,16,20] |
PHFRT15-[15-800/0.1]-M[4,5,6,8,10] |
PHFRT15-[15-800/0.1]-MD[4,5,6,8,10] |
PHFRT20-[30-800/0.1]-M[4,5,6,8,10,12,16] |
PHFRT20-[30-800/0.1]-MD[4,5,6,8,10,12,16] |
PHFRT25-[50-800/0.1]-M[4,5,6,8,10,12,16] |
PHFRT25-[50-800/0.1]-MD[4,5,6,8,10,12,16] |
PHFRT30-[60-800/0.1]-M[6,8,10,12,16,20] |
PHFRT30-[60-800/0.1]-MD[6,8,10,12,16,20] |
PHFRT35-[70-800/0.1]-M[6,8,10,12,16,20,24] |
PHFRT35-[70-800/0.1]-MD[6,8,10,12,16,20] |
PHFRT40-[80-800/0.1]-M[10,12,16,20,24,30] |
PHFRT40-[80-800/0.1]-MD[10,12,16,20] |
PHFRT50-[100-800/0.1]-M[12,16,20,24,30] |
PHFRT50-[100-800/0.1]-MD[12,16,20] |
PSFRT4-[15-200/0.1]-M2 |
PSFRT5-[15-250/0.1]-M[2,2.6,3] |
PSFRT5-[15-250/0.1]-MD3 |
PSFRT6-[15-400/0.1]-M[2.6,3,4] |
PSFRT6-[15-400/0.1]-MD[3,4] |
PSFRT8-[15-500/0.1]-M[2.6,3,4,5,6] |
PSFRT8-[15-500/0.1]-MD[3,4,5,6] |
PSFRT10-[15-600/0.1]-M[3,4,5,6] |
PSFRT10-[15-600/0.1]-MD[3,4,5,6] |
PSFRT12-[15-700/0.1]-M[4,5,6,8] |
PSFRT12-[15-700/0.1]-MD[4,5,6,8] |
PSFRT13-[15-700/0.1]-M[4,5,6,8] |
PSFRT13-[15-700/0.1]-MD[4,5,6,8] |
PSFRT15-[15-800/0.1]-M[4,5,6,8,10] |
PSFRT15-[15-800/0.1]-MD[4,5,6,8,10] |
PSFRT16-[15-900/0.1]-M[4,5,6,8,10] |
PSFRT16-[15-900/0.1]-MD[4,5,6,8,10] |
PSFRT17-[30-900/0.1]-M[4,5,6,8,10,12] |
PSFRT17-[30-900/0.1]-MD[4,5,6,8,10,12] |
PSFRT18-[30-900/0.1]-M[4,5,6,8,10,12] |
PSFRT18-[30-900/0.1]-MD[4,5,6,8,10,12] |
PSFRT20-[30-1000/0.1]-M[4,5,6,8,10,12,16] |
PSFRT20-[30-1000/0.1]-MD[4,5,6,8,10,12,16] |
PSFRT22-[40-1000/0.1]-M[4,5,6,8,10,12,16] |
PSFRT22-[40-1000/0.1]-MD[4,5,6,8,10,12,16] |
PSFRT25-[50-1000/0.1]-M[4,5,6,8,10,12,16] |
PSFRT25-[50-1000/0.1]-MD[4,5,6,8,10,12,16] |
PSFRT30-[60-1000/0.1]-M[6,8,10,12,16,20] |
PSFRT30-[60-1000/0.1]-MD[6,8,10,12,16,20] |
PSFRT35-[70-1000/0.1]-M[6,8,10,12,16,20,24] |
PSFRT35-[70-1000/0.1]-MD[6,8,10,12,16,20] |
PSFRT40-[80-1000/0.1]-M[10,12,16,20,24,30] |
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | RoHS | Material | Hardness | Surface Treatment | D Tolerance | Shaft Dia. D (mm) | Length L (mm) | M (mm) | MD | Wrench Flats Machining [SC] (mm) | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 | 6 Days | 10 | [Steel] EN 1.7220 Equiv. | Hardened | [Surface Treatment Provided] Black Oxide | g6 (Ground) | 15 | 15 ~ 800 | 4 ~ 10 | - | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.7220 Equiv. | Hardened | [Surface Treatment Provided] Black Oxide | g6 (Ground) | 15 | 15 ~ 800 | - | 4 ~ 10 | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.7220 Equiv. | Hardened | [Surface Treatment Provided] Black Oxide | g6 (Ground) | 20 | 30 ~ 800 | 4 ~ 16 | - | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.7220 Equiv. | Hardened | [Surface Treatment Provided] Black Oxide | g6 (Ground) | 20 | 30 ~ 800 | - | 4 ~ 16 | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.7220 Equiv. | Hardened | [Surface Treatment Provided] Black Oxide | g6 (Ground) | 25 | 50 ~ 800 | 4 ~ 16 | - | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.7220 Equiv. | Hardened | [Surface Treatment Provided] Black Oxide | g6 (Ground) | 25 | 50 ~ 800 | - | 4 ~ 16 | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.7220 Equiv. | Hardened | [Surface Treatment Provided] Black Oxide | g6 (Ground) | 30 | 60 ~ 800 | 6 ~ 20 | - | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.7220 Equiv. | Hardened | [Surface Treatment Provided] Black Oxide | g6 (Ground) | 30 | 60 ~ 800 | - | 6 ~ 20 | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.7220 Equiv. | Hardened | [Surface Treatment Provided] Black Oxide | g6 (Ground) | 35 | 70 ~ 800 | 6 ~ 24 | - | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.7220 Equiv. | Hardened | [Surface Treatment Provided] Black Oxide | g6 (Ground) | 35 | 70 ~ 800 | - | 6 ~ 20 | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.7220 Equiv. | Hardened | [Surface Treatment Provided] Black Oxide | g6 (Ground) | 40 | 80 ~ 800 | 10 ~ 30 | - | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.7220 Equiv. | Hardened | [Surface Treatment Provided] Black Oxide | g6 (Ground) | 40 | 80 ~ 800 | - | 10 ~ 20 | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.7220 Equiv. | Hardened | [Surface Treatment Provided] Black Oxide | g6 (Ground) | 50 | 100 ~ 800 | 12 ~ 30 | - | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.7220 Equiv. | Hardened | [Surface Treatment Provided] Black Oxide | g6 (Ground) | 50 | 100 ~ 800 | - | 12 ~ 20 | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.7220 Equiv. | Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 15 | 15 ~ 800 | 4 ~ 10 | - | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.7220 Equiv. | Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 15 | 15 ~ 800 | - | 4 ~ 10 | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.7220 Equiv. | Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 20 | 30 ~ 800 | 4 ~ 16 | - | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.7220 Equiv. | Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 20 | 30 ~ 800 | - | 4 ~ 16 | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.7220 Equiv. | Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 25 | 50 ~ 800 | 4 ~ 16 | - | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.7220 Equiv. | Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 25 | 50 ~ 800 | - | 4 ~ 16 | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.7220 Equiv. | Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 30 | 60 ~ 800 | 6 ~ 20 | - | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.7220 Equiv. | Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 30 | 60 ~ 800 | - | 6 ~ 20 | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.7220 Equiv. | Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 35 | 70 ~ 800 | 6 ~ 24 | - | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.7220 Equiv. | Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 35 | 70 ~ 800 | - | 6 ~ 20 | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.7220 Equiv. | Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 40 | 80 ~ 800 | 10 ~ 30 | - | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.7220 Equiv. | Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 40 | 80 ~ 800 | - | 10 ~ 20 | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.7220 Equiv. | Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 50 | 100 ~ 800 | 12 ~ 30 | - | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.7220 Equiv. | Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 50 | 100 ~ 800 | - | 12 ~ 20 | - | ||
- | 1 | 7 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 4 | 15 ~ 200 | 2 | - | - | ||
- | 1 | 7 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 5 | 15 ~ 250 | 2 ~ 3 | - | - | ||
- | 1 | 7 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 5 | 15 ~ 250 | - | 3 | - | ||
- | 1 | 7 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 6 | 15 ~ 400 | 2.6 ~ 4 | - | - | ||
- | 1 | 7 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 6 | 15 ~ 400 | - | 3 ~ 4 | - | ||
- | 1 | 7 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 8 | 15 ~ 500 | 2.6 ~ 6 | - | - | ||
- | 1 | 7 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 8 | 15 ~ 500 | - | 3 ~ 6 | - | ||
- | 1 | 7 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 10 | 15 ~ 600 | 3 ~ 6 | - | - | ||
- | 1 | 7 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 10 | 15 ~ 600 | - | 3 ~ 6 | - | ||
- | 1 | 7 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 12 | 15 ~ 700 | 4 ~ 8 | - | - | ||
- | 1 | 7 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 12 | 15 ~ 700 | - | 4 ~ 8 | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 13 | 15 ~ 700 | 4 ~ 8 | - | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 13 | 15 ~ 700 | - | 4 ~ 8 | - | ||
- | 1 | 7 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 15 | 15 ~ 800 | 4 ~ 10 | - | - | ||
- | 1 | 7 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 15 | 15 ~ 800 | - | 4 ~ 10 | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 16 | 15 ~ 900 | 4 ~ 10 | - | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 16 | 15 ~ 900 | - | 4 ~ 10 | - | ||
- | 1 | 7 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 17 | 30 ~ 900 | 4 ~ 12 | - | - | ||
- | 1 | 7 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 17 | 30 ~ 900 | - | 4 ~ 12 | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 18 | 30 ~ 900 | 4 ~ 12 | - | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 18 | 30 ~ 900 | - | 4 ~ 12 | - | ||
- | 1 | 7 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 20 | 30 ~ 1000 | 4 ~ 16 | - | - | ||
- | 1 | 7 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 20 | 30 ~ 1000 | - | 4 ~ 16 | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 22 | 40 ~ 1000 | 4 ~ 16 | - | - | ||
- | 1 | 6 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 22 | 40 ~ 1000 | - | 4 ~ 16 | - | ||
- | 1 | 7 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 25 | 50 ~ 1000 | 4 ~ 16 | - | - | ||
- | 1 | 7 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 25 | 50 ~ 1000 | - | 4 ~ 16 | - | ||
- | 1 | 7 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 30 | 60 ~ 1000 | 6 ~ 20 | - | - | ||
- | 1 | 7 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 30 | 60 ~ 1000 | - | 6 ~ 20 | - | ||
- | 1 | 7 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 35 | 70 ~ 1000 | 6 ~ 24 | - | - | ||
- | 1 | 7 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 35 | 70 ~ 1000 | - | 6 ~ 20 | - | ||
- | 1 | 7 Days | 10 | [Steel] EN 1.1191 Equiv. | No Hardened | [Surface Treatment Provided] Electroless Nickel Plating | g6 (Ground) | 40 | 80 ~ 1000 | 10 ~ 30 | - | - |
Loading...
Basic Shape | Straight | End Shape (Left) | Tapped | End Shape (Right) | Straight |
---|---|---|---|---|---|
Keyway | Keyway Option (Alteration) |
Configure
Basic Attributes
Material
Hardness
Surface Treatment
Shaft Dia. D(mm)
Length L(mm)
M(mm)
MD
Wrench Flats Machining [SC](mm)
Type
D Tolerance
Filter by CAD data type
Filter by standard shipping days
Optional Attributes