Linear Ball Bearings / Flange Selectable (Central) / Steel / Double Bearing (LHMRD10)

Linear Ball Bearings / Flange Selectable (Central) / Steel / Double Bearing LHMRD10

Click on this image to zoom in.

Click on this image to zoom in.

  • Linear Ball Bearings / Flange Selectable (Central) / Steel / Double Bearing
  • Linear Ball Bearings / Flange Selectable (Central) / Steel / Double Bearing
  • Volume Discount

Product Details:

Manufacturer part number: LHMRD10

Brand: MISUMI

Price: 12.52

Delivery time: 5 Days


Technical Data:

Features, Areas of Application: Not Applicable

[dr] Inner Diameter: 10 mm

[L] Length (Total): 47 mm

Outer Cylinder Surface Treatment: No Surface Treatment

Grease coating: Not Provided


  • Order quantities extended (D-JIT)

(i)Remark

  • In October 2023, the connection method of flange and cylinder will be changed from brazing to adhesive bonding for some part numbers. Affected part numbers can be found in this PDF. The current applicable specifications will be fulfilled.
    Here you can find details about the changed connection method.
    There is a possibility that your delivery may contain mixed versions of products.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

LHMRD10

Round Flange
Square flange
Compact Flange
dr = 6 to 13
dr = 16 to 30

" ! "Body length and allowable moment are approximately 1.5 and 4.3 times those of Single Type respectively (See Allowable Load Comparison)
TypeOuter CylinderBallsRetainerOperating Ambient Temperature[A] Accessory
Round FlangeSquare flangeCompact Flange[M] Material[H] Hardness[S] Surface Treatment[M] Material[M] Material
LHMRDLHMSDLHMCDEN 1.3505 Equiv.58HRC or moreEN 1.3505 Equiv.POM-20 to 80°CSeal [M] Material
LHMRDMLHMSDMLHMCDMElectroless Nickel PlatingEN 1.4125 Equiv. (Duracon M90 Equiv.) PlasticNBR (Nitrile Butadiene Rubber) (-20 to 120°C)

Specification Table

Part Number 
LHIRD12
LHMCD16
Flanged Linear Bushing - Center Flanged, Medium: Related ImageLHIRD12L
Flanged Linear Bushing - Center Flanged, Medium: Related ImageLHMCD16G
Flanged Linear Bushing - Center Flanged, Medium: Related ImageLHMSD20H


(L Type Greased)
(G Type Greased)
(H Type Greased)
[ ! ] Alternative grease types available.
dr D Tolerance LHTdd1tP.C.D.WFAEccentricityBall Rows* PerpendicularityBasic Load RatingAllowable StaticMass (g)
Moment
 Tolerance Surface TreatmentSurface Treatment ToleranceC (Dynamic) NCo (Static) N(N⋅m)Compact FlangeSquare flangeCompact Flange
Not ProvidedProvided 
60
-0.010
120
-0.013
0
-0.018
29±0.3122853.563.12022200.01540.0152263101.42272124
8153716322425243104522.12473943
10190
-0.016
0
-0.021
4720.54064.57.54.12930295087184.37856577
1221423232326348146.2896981
1323433334336408266.210987102
1628562548383722311164144813.1157132149
200
-0.012
320
-0.019
0
-0.025
6528.55485.595.1434224360.0250.021554206818.3232197219
25408337.5625150324061725306825.3481442452
3045904074106.6116.1605835492440397442.7560482494
* Perpendicularity of D to flange mounting surface
[ ! ] Anti-rust oil is applied at the time of delivery.
Grease coating
By selecting the grease below, change to the product with grease coating is available.
TypeProduct NameMain Features
A TypeAlvania Grease S2 (by Showa Shell Sekiyu)General-purpose grease suitable for various grease lubrication locations.
Y TypeAFF (Made by THK Co., Ltd.)Grease with less particles, stable rolling resistance, and excellent fretting resistance.
G TypeLG2 (Made by NSK Ltd.)Grease with less particles, excellent wear and rust resistance.
L TypeET-100K (Made by KYODO YUSHI Co., Ltd.)Superior heat resistance and oxidation stability. Also high adhesion and cohesion with limited splash or leakage.
H TypeFGL (Lubriplate)Suitable for lubrication of equipment for special hygienic requirements. (NSF H-1 Reg. No. 043534)
Grease Performance Table (Reference Value)
ItemConditionsUnitMeasurement MethodA TypeY TypeG TypeL TypeH Type
ThickenerLithium TypeLithium TypeLithium TypeAromatic DiureaAluminum Complex Soap
Base OilMineral OilFine Synthetic OilMineral Oil + Synthetic Hydrocarbon OilEther Synthetic OilUSP White Oil
Base Oil
Kinematic Viscosity
40°Cmm2/sJIS K2220 2313110032105 (ASTMD-445)
100°C12.25.411.5 (ASTMD-445)
Worked PenetrationJIS K2220 7283315199280310 (ASTMD-217)
Dropping Point°CJIS K2220 8181220201260 <238 (ASTMD-217)
Evaporation Amount99°C × 22 hrwt%JIS K2220 100.20.71.40.27 (ASTMD−972)
Oil Separation100°C × 24 hrwt%JIS K2220 112.42.60.81.22.1 (ASTMD−1742)
Operating Temp.In Air°C-25 to 120-40 to 120−20 to 70−40 to 200−12 to 177

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...
Part Number
LHMRD10
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSFeatures, Areas of Application [dr] Inner Diameter
(mm)
[L] Length (Total)
(mm)
Outer Cylinder Surface Treatment Grease coating [D] Outer Diameter
(mm)
Basic Load Rating Dynamic Rating (Detail)
(N)
Basic Load Rating Static Rating
(N)
Tolerance of Inscribed Circle (Minus Side)
(mm)
Eccentricity
(μm)
Basic Rated Load, Dynamic Rating Flange Shape Ball Material Retainer Material

12.52 €

1 Available 5 Days 10Not Applicable1047No Surface TreatmentNot Provided19508718-0.0115508Round FlangeEN 1.3505 Equiv.Plastic (POM Equiv.)

Loading...

  1. 1

Specifications/Overview

■Allowable Load Comparison
TypeBasic Dynamic Load RatingBasic Static Load RatingAllowable Static Moment
Short0.70.6Approx. 0.6
Single111
Medium1.41.3Approx. 4.3
Double1.62Approx. 6
Medium Long1.61.6Approx. 10
Long1.62Approx. 21
* "1" represents Single Type for comparison.

Basic information

Type2 Center Flange RoHS Information RoHS Requirements Fulfilled Style Standard
Flange Type Center Flanged Material of Outer Cylinder EN 1.3505 Equiv. Motion Linear Motion
Number of Linear Ball Bearings Double Accuracy High-Quality Linear Motion / Rotational Motion Linear Bushing (Linear Motion Only)
Seals With Seal Counterbored Hole Standard

This page is Linear Ball Bearings / Flange Selectable (Central) / Steel / Double Bearing, part number LHMRD10.
You can find the detail information about specifications and dimensions on part number LHMRD10.

Variation of this product

Part Number
LHMCD10H
LHMCD10L
LHMCD10Y
LHMRD10A
LHMRD10G
LHMRD10H
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountStandard
Shipping Days
?
RoHSFeatures, Areas of Application [dr] Inner Diameter
(mm)
[L] Length (Total)
(mm)
Outer Cylinder Surface Treatment Grease coating [D] Outer Diameter
(mm)
Basic Load Rating Dynamic Rating (Detail)
(N)
Basic Load Rating Static Rating
(N)
Tolerance of Inscribed Circle (Minus Side)
(mm)
Eccentricity
(μm)
Basic Rated Load, Dynamic Rating Flange Shape Ball Material Retainer Material

27.90 €

1 Available 9 Days 10Not Applicable1047No Surface TreatmentNot Provided19508718-0.0115508Compact FlangeEN 1.3505 Equiv.Plastic (POM Equiv.)

27.90 €

1 Available 9 Days 10Not Applicable1047No Surface TreatmentNot Provided19508718-0.0115508Compact FlangeEN 1.3505 Equiv.Plastic (POM Equiv.)

20.52 €

1 Available 9 Days -Not Applicable1047No Surface Treatment[Grease coating] Y Type: AFF (Low dust generation, manufactured by THK)19508718-0.0115508Compact FlangeEN 1.3505 Equiv.Plastic (Duracon M90 Equivalent)

17.25 €

1 Available 9 Days -Not Applicable1047No Surface Treatment[Grease coating] A Type: Alvania S2 (For general-purpose industrial use)19508718-0.0115508Round FlangeEN 1.3505 Equiv.Plastic (Duracon M90 Equivalent)

26.18 €

1 Available 9 Days 10Not Applicable1047No Surface TreatmentNot Provided19508718-0.0115508Round FlangeEN 1.3505 Equiv.Plastic (POM Equiv.)

26.18 €

1 Available 9 Days 10Not Applicable1047No Surface TreatmentNot Provided19508718-0.0115508Round FlangeEN 1.3505 Equiv.Plastic (POM Equiv.)

Complementary Products

MISUMI Unit еxample related to this product

Tech Support

Technical Support
Tel:+49 69 668173-0 / FAX:+49 69 668173-360