Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
TYPE | Outer Cylinder | Balls | Retainer | Ambient Operating Temp. | Accessory | |||
Round Flange | Square Flange | Compact Flange | Material | Hardness | Material | Material | ||
C-LHFRW | C-LHFSW | C-LHFCW | EN 1.3505 Equiv. | 58HRC~ | EN 1.3505 Equiv. | Plastic | -20~80°C | Seal Material: Nitrile Rubber |
Part Number |
C-LHFCW8 |
Part Number | Outer Dia.: D | Overall Length: L | H | T | d | d1 | t | P.C.D. | W | F | A | Eccentricity | Rows of Balls | Perpendicularity | Mass (g) | ||||||
TYPE | dr | Tolerance | Tolerance | Tolerance | Round Flange | Square Flange | Compact Flange | ||||||||||||||
C-LHFRW C-LHFSW C-LHFCW | 6 | +0.003 -0.013 | 12 | +0.006 -0.015 | 35 | ±0.6 | 28 | 5 | 3.5 | 6 | 3.1 | 20 | 22 | - | 20 | 0.030 | 4 | 0.030 | 31 | 25 | 28 |
8 | 15 | 45 | 32 | 24 | 25 | - | 24 | 51 | 43 | 47 | |||||||||||
10 | 19 | +0.006 -0.018 | 55 | 40 | 6 | 4.5 | 7.5 | 4.1 | 29 | 30 | - | 29 | 98 | 78 | 90 | ||||||
12 | 21 | 57 | 42 | 32 | 32 | - | 32 | 110 | 90 | 102 | |||||||||||
13 | 23 | 61 | 43 | 33 | 34 | - | 33 | 130 | 108 | 123 | |||||||||||
16 | 28 | 70 | 48 | 38 | 37 | 22 | 31 | 190 | 165 | 182 | |||||||||||
20 | +0.003 -0.015 | 32 | +0.006 -0.021 | 80 | 54 | 8 | 5.5 | 9 | 5.1 | 43 | 42 | 24 | 36 | 0.040 | 5 | 0.040 | 260 | 225 | 247 | ||
25 | 40 | 112 | 62 | 51 | 50 | 32 | 40 | 6 | 540 | 500 | 525 | ||||||||||
30 | 45 | 123 | 74 | 10 | 6.6 | 11 | 6.1 | 60 | 58 | 35 | 49 | 680 | 590 | 645 | |||||||
35 | +0.003 -0.018 | 52 | +0.006 -0.024 | 135 | 82 | 67 | 64 | 38 | 55 | 0.050 | 0.050 | 1020 | 930 | 945 | |||||||
40 | 60 | 151 | 96 | 13 | 9 | 14 | 8.1 | 78 | 75 | 45 | 64 | 1570 | 1380 | 1423 | |||||||
50 | 80 | 192 | 116 | 98 | 92 | 56 | 80 | 3600 | 3400 | 3437 |
dr | Basic Load Rating | Allowable Static Moment (N • m) | |
C (Dynamic) N | Co (Static) N | ||
6 | 324 | 529 | 2.18 |
8 | 431 | 784 | 4.31 |
10 | 588 | 1100 | 7.24 |
12 | 657 | 1200 | 10.9 |
13 | 813 | 1570 | 11.6 |
16 | 1230 | 2350 | 19.7 |
20 | 1400 | 2740 | 26.8 |
25 | 1560 | 3140 | 43.4 |
30 | 2490 | 5490 | 82.8 |
35 | 2650 | 6270 | 110 |
40 | 3430 | 8040 | 147 |
50 | 6080 | 15900 | 397 |
dr | Shaft Dia. | Housing Dia. | |
g6 Tolerance | Tolerance | ||
3 | -0.002 -0.008 | 7 | +0.021 +0.006 |
4 | -0.004 -0.012 | 8 | |
5 | 10 | ||
6 | 12 | +0.024 +0.006 | |
8 | -0.005 -0.014 | 15 | |
10 | 19 | +0.027 +0.006 | |
12 | -0.006 -0.017 | 21 | |
13 | 23 | ||
16 | 28 | ||
20 | -0.007 -0.020 | 32 | +0.031 +0.006 |
25 | 40 | ||
30 | 45 | ||
35 | -0.009 -0.025 | 52 | +0.036 +0.006 |
40 | 60 | ||
50 | 80 |
3D preview is not available, because the part number has not yet been determined.
Part Number |
Standard Unit Price
| Minimum order quantity | Volume Discount | [dr] Inner Diameter (mm) | [L] Length (Total) (mm) | [D] Outer Diameter (mm) | Basic Load Rating Dynamic Rating (Detail) (N) | Basic Load Rating Static Rating (N) | Tolerance of Inscribed Circle (Minus Side) (mm) | Eccentricity (μm) | Flange Shape | |
---|---|---|---|---|---|---|---|---|---|---|---|---|
6.41 € | 1 | Available | 5 Days | 6 | 35 | 12 | 324 | 529 | -0.013 | 30 | Compact Flanged | |
6.41 € | 1 | Available |
Same day
Stock | 8 | 45 | 15 | 431 | 784 | -0.013 | 30 | Compact Flanged | |
6.63 € | 1 | Available |
Same day
Stock | 10 | 55 | 19 | 588 | 1100 | -0.013 | 30 | Compact Flanged | |
7.03 € | 1 | Available |
Same day
Stock | 12 | 57 | 21 | 657 | 1200 | -0.013 | 30 | Compact Flanged | |
7.71 € | 1 | Available | 5 Days | 13 | 61 | 23 | 813 | 1570 | -0.013 | 30 | Compact Flanged | |
8.73 € | 1 | Available |
Same day
Stock | 16 | 70 | 28 | 1230 | 2350 | -0.013 | 30 | Compact Flanged | |
10.72 € | 1 | Available |
Same day
Stock | 20 | 80 | 32 | 1400 | 2740 | -0.015 | 40 | Compact Flanged | |
15.24 € | 1 | Available |
Same day
Stock | 25 | 112 | 40 | 1560 | 3140 | -0.015 | 40 | Compact Flanged | |
21.49 € | 1 | Available |
Same day
Stock | 30 | 123 | 45 | 2490 | 5490 | -0.015 | 40 | Compact Flanged | |
6.30 € | 1 | Available | 5 Days | 6 | 35 | 12 | 324 | 529 | -0.013 | 30 | Round Flanged | |
6.36 € | 1 | Available | 5 Days | 8 | 45 | 15 | 431 | 784 | -0.013 | 30 | Round Flanged | |
6.46 € | 1 | Available | 5 Days | 10 | 55 | 19 | 588 | 1100 | -0.013 | 30 | Round Flanged | |
6.92 € | 1 | Available | 5 Days | 12 | 57 | 21 | 657 | 1200 | -0.013 | 30 | Round Flanged | |
7.65 € | 1 | Available | 5 Days | 13 | 61 | 23 | 813 | 1570 | -0.013 | 30 | Round Flanged | |
8.80 € | 1 | Available |
Same day
Stock | 16 | 70 | 28 | 1230 | 2350 | -0.013 | 30 | Round Flanged | |
10.65 € | 1 | Available |
Same day
Stock | 20 | 80 | 32 | 1400 | 2740 | -0.015 | 40 | Round Flanged | |
15.19 € | 1 | Available |
Same day
Stock | 25 | 112 | 40 | 1560 | 3140 | -0.015 | 40 | Round Flanged | |
20.69 € | 1 | Available |
Same day
Stock | 30 | 123 | 45 | 2490 | 5490 | -0.015 | 40 | Round Flanged | |
33.55 € | 1 | Available | 5 Days | 35 | 135 | 52 | 2650 | 6270 | -0.018 | 50 | Round Flanged | |
43.30 € | 1 | Available | 5 Days | 40 | 151 | 60 | 3430 | 8040 | -0.018 | 50 | Round Flanged | |
58.37 € | 1 | Available | 5 Days | 50 | 192 | 80 | 6080 | 15900 | -0.018 | 50 | Round Flanged | |
7.43 € | 1 | Available | 5 Days | 6 | 35 | 12 | 324 | 529 | -0.013 | 30 | Square Flanged | |
7.43 € | 1 | Available | 5 Days | 8 | 45 | 15 | 431 | 784 | -0.013 | 30 | Square Flanged | |
7.78 € | 1 | Available | 5 Days | 10 | 55 | 19 | 588 | 1100 | -0.013 | 30 | Square Flanged | |
8.27 € | 1 | Available |
Same day
Stock | 12 | 57 | 21 | 657 | 1200 | -0.013 | 30 | Square Flanged | |
9.06 € | 1 | Available |
Same day
Stock | 13 | 61 | 23 | 813 | 1570 | -0.013 | 30 | Square Flanged | |
10.49 € | 1 | Available |
Same day
Stock | 16 | 70 | 28 | 1230 | 2350 | -0.013 | 30 | Square Flanged | |
12.70 € | 1 | Available |
Same day
Stock | 20 | 80 | 32 | 1400 | 2740 | -0.015 | 40 | Square Flanged | |
18.14 € | 1 | Available | 5 Days | 25 | 112 | 40 | 1560 | 3140 | -0.015 | 40 | Square Flanged | |
64.04 € | 1 | Available | 5 Days | 30 | 123 | 45 | 2490 | 5490 | -0.015 | 40 | Square Flanged | |
40.07 € | 1 | Available | 5 Days | 35 | 135 | 52 | 2650 | 6270 | -0.018 | 50 | Square Flanged | |
51.80 € | 1 | Available | 5 Days | 40 | 151 | 60 | 3430 | 8040 | -0.018 | 50 | Square Flanged | |
69.77 € | 1 | Available | 5 Days | 50 | 192 | 80 | 6080 | 15900 | -0.018 | 50 | Square Flanged |
Loading...
Type2 | Flange | Style | Standard | Flange Type | Standard Flange |
---|---|---|---|---|---|
Material of Outer Cylinder | EN 1.3505 Equiv. | Outer Cylinder Surface Treatment | No Surface Treatment | Motion | Linear Motion |
Grease Coating | Not Provided | Number of Linear Ball Bearings | Double | Accuracy | High-Quality |
Type | Standard Flange | Version Length Variant | Double | Ball Material | EN 1.3505 Equiv. |
Retainer Material | Plastic (POM Equiv.) | Seals | With Seal | Counterbored Hole | Standard |
Greased filled | Not Provided |
Configure
Stock
Basic Attributes
[dr] Inner Diameter(mm)
[L] Length (Total)(mm)
[D] Outer Diameter(mm)
Eccentricity(μm)
Flange Shape
Type
Filter by CAD data type
Filter by standard shipping days
Optional Attributes